PSD Corrupts While Open in Lightroom

My wife is running LR3.6 on OSX 10.7 and edits in CS5. The Lightroom catalog file resides locally on her MacBook Pro and the PSD is on a network share. The share is on a Mac mini server running 10.7 Server. The share is on a direct attached Drobo S. Drobo Dashboard reports the drive array as healthy. I sent a diag file to Drobo, and they confirm the drive is functioning normally. Further, I ran Disk Utility Verify Disk on the drive as well as the partition, and both checked out OK.
What we have been seeing is two fold. When we import NEF files from her D3S, we see an occasional file with random color banding across the pictures. The second issue is sometimes a PSD file will all of a sudden develop a random colored line across the image. Here is a link to the corrupt PSD file http://c.tro.pe/IGb7 and this is a link to a screenshot of the bad NEF import http://c.tro.pe/IGzj.
She will see the PSD open in LR and the line will show up. Perhaps this is LR updating itself based on what it sees on disk. Has anyone else experienced these issues? Thanks!

Check your RAM. I know on PC that there are free, bootable, standalone memory testing programs that can be found on the web. There must be something similar for the Mac, maybe even supplied by Apple.
Added later: http://guides.macrumors.com/Testing_RAM
At any rate, you are seeing classic symptoms of some kind of hardware problem. Since it happens after import, the problem is, as Lee Jay says, in your disk drives or memory. Since your image is on the Drobo, that would be the drive to suspect. I don't know how good the Drobo diagnostics are, but you could try keeping your images on a different drive for a while to see if the problem continues. If it does, then the problem would likely reside in RAM.
Good luck. Intemittent hardware problems are hard to troubleshoot.
Hal
Message was edited by: Hal P Anderson

Similar Messages

Corrupted image files in Lightroom?

I opened up Lightroom this morning and noticed that some of my files from a recent shoot look like this:
Are they corrupted?
If so, how does that happen? I've never seen this before and I have thousands of images in LR.

Thanks. I read through a few of the other threads. I found one comment that might be applicable to my situation:
Good - most often this tell-tale/signature-looking corruption is due to hardware - transfer hardware if corrupt upon first rendering (true raw rendering, not initial preview display), hard disk if corrupt after first rendering. And sometimes ram.
I think this may have had something to do with how I got these files onto my computer. I shot the pictures while visiting family. I had my Macbook Pro with me, which is not my main image editing machine. I imported the files into LR4 on the MPB from the 5D3 using the USB cable.
When I returned home, I moved the files from their location on the MBP to a USB flash drive, and then imported them from the flash drive to LR4 on my Mac Pro (which is my main image editing machine).
The corrupted images are only from this group. So I'm hoping that it was the transfer to and from the flash drive that caused this, especially since I've never experienced it before and don't see it in any of my other images.
Fingers crossed!

Need Help. PSD corrupted in middle of workflow.

I have no idea what happened to my psd. I have never seen this before and am hoping I just pressed some keys.
I closed photoshop restarted computer and nothing happened. All these are supposed to have images I was on my last layer & wasted 2 hours.
Has anyone had their psds corrupt like this? If so How did you fix it? I am on a deadline. Also how can I prevent this problem from happening again.
PLEASE HELP!

I hate to tell you this, but you are probably out of luck. We see this once a month or so, and people seldom manage to retrive anything worth while, but it is unusual to see this happen mid workflow. It usually seems to happen when saving, or is discovered when attempting to open a file.
You mave have something in the recovery folder if Photoshop consideres itself to have crashed, but I don't know what OS you are using. (Allways best to upload your entire screen at full res so people can more information).
You may be able to use one of the PSD recovery apps found on the Web, if your last save is also corrupted. I'm assume you save often? It is also a good idea to increment file names every 15 to 30 minutes in case of this sort of situation. A lesson the regular posters here have learned from other poster's misfortune.
Good luck, but my gut feeling is that you are probably not going to have any.

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Error while opening the backup information fom Maxdb

Hello All,
I am getting the below error while opening the backup information from Maxdb.
Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
The full line is as below from the dbm.knl file:
4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689| |<SID>_LOG | 85344| 0| 0| |
I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
Currently i am getting this error and when i am click on cancel (or ok) getting the blank page. I am not able to view the backup logs form Maxdb.
Please give me some hint to resolve this.
Regards,
Nagendra.

Hi,
Use below procedure
1. Go to /sapdb/SRD/data/wrk
2. cp -rp dbm_knl dbm_knl_OLD
3. vi +<Line in which the corruption occured> dbm.knl
see there must be a corruption in the given line and it will specified with a green color
delete that part and make the format as per the above line
4. save the file
5. execute the procedure again from Database studio or Database Manager
(Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
(FYI : This file is only log file of successful backups and returns the return-code)
Regards,
Paramvirsinh Jetawat
SAP BASIS Consultant

Error while opening report in Infoview

I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
     at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
     at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
Ramesh

Hi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne

Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
<Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
00000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:166)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
at weblogic.store.io.file.Heap.open(Heap.java:164)
... 9 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
... 10 more
i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

The root cause appears to be right in the stack trace:
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
I don't think that this message necessarily means there is a file corruption.
As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
Tom

Error while opening Excel file with Add-ins "CtExcelLinksWeb.xll" for BOFC

Hi,
While opening an excel sheet with the Add-ins, "CtExcelLinksWeb.xll", the following error is being displayed,
The file you ar trying to open , "CtExcelLinksWeb.xll", is in different format than specified by the file extension.
Verify that the file is not corrupted and is from a trusted source before opening the file. Do you wnat to open the file now?
If any setting is required for solving the error kindly help me on it.
Thanks
Prity

Hi ,
I think you are using older version,use microsoft excel 2007 version,then it will opens.
Regrads,
SVS
Edited by: svskumar on Aug 19, 2010 12:18 PM

Error while opening PDF in mail attachment

Hi All,
In smartform i am sending a mail with attachemnt as PDF file,there is one more option like preview of smartform .
issue is like i am able to see the preview of the same record but when it is sent in mail attachement,and while opening PDF its showing error that file can not be open it is corrupted.
Please help.
Mona Singh.

Dear Sandra
That was my problem: binary data was incorrectly converted (often because of Unicode systems).
I returned
        bin_filesize          = v_len_in
        bin_file              = l_binfile
from the function module CONVERT_OTF, then converted the xstring data (l_binfile) into an internal table (t_objbin) to send to the mail send function with the following function module:
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer        = l_binfile
      IMPORTING
        output_length = v_lines_bin
      TABLES
        binary_tab    = t_objbin.
Many thanks for your help.
Best regards
Patricia

Getting error while opening pdf on server

Dear All,
I am working on jdeveloper 11.1.1.4.0.
I have a use case where on click of link , generating a dynamic pdf. The pdf i am arranging with the help of itext through backing bean. It is generating as well downloading the pdf.I have used filedownloadlistner to call the generate and download pdf methods.
On integrated weblogic server the pdf is working fine, but when i deploy on server while opening pdf getting error :
*"Adobe Reader could not open 'test.pdf' beacause it is either not a supported file type*
*or because the file has been damaged (for example, it was sent as an email attachment and*
*wasn't correctly decoded)."*
I am not able to get the root cause for the problem. The sample code to generate and download pdf is :
// Generate PDF
private void generatePDFFile(FacesContext facesContext,
java.io.OutputStream outputStream) {
try {
System.out.println("In Generate PDF................");
Document document = new Document(PageSize.A4);
PdfWriter.getInstance(document, new FileOutputStream(FILE));
document.open();
addMetaData(document);
addTitlePage(document);
document.close();
System.out.println("End of PDF......................");
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
System.out.println(context.getRealPath("/"));
String FILE = "test.pdf";
File file = new File(FILE);
FileInputStream fdownload;
//BufferedInputStream bis;
byte[] b;
System.out.println(file.getCanonicalPath());
System.out.println(file.getAbsolutePath());
fdownload = new FileInputStream(file);
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
} catch (Exception e) {
e.printStackTrace();
Download PDF
private void downloadPDF(FacesContext facesContext, java.io.OutputStream outputStream) {
try {
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
ExternalContext ctx = facesContext.getExternalContext();
HttpServletResponse res = (HttpServletResponse)ctx.getResponse();
res.setContentType("application/pdf");
outputStream = res.getOutputStream();
System.out.println(context.getRealPath("/"));
File file = new File(FILE); // FILE = 'test.pdf'
FileInputStream fdownload;
// BufferedInputStream bis;
byte[] b;
fdownload = new FileInputStream(file);
//bis = new BufferedInputStream (new FileInputStream(file));
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
//outputStream.write(b, 0, b.length);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
outputStream.close();
fdownload.close();
} catch (Exception e) {
e.printStackTrace();
Any help will be appreciated.
Thanks
Kanika

If the pdf file don't open on the server where you created them, they won't open on the client side either.
The code you are using should be refactored to use different file names for the generated files. In a multi user environment (which every web application is) you overwrite the file generated with each new request, even before the file is loaded by a client. This will corrupt the file a client is loading and you get the error you see.
Next I would look into org.apache.commons.io package (http://commons.apache.org/io/) which has utility classes which allows easy handling of streams without looping over the data.
Timo

Error while opening PDF attachment sent via mail

Hi,
I am attaching PDF file to PO in me22n and sending the same file as attachment in the mail to the vendor using class CL_BCS.
The mail is sent to the vendor successfully and they are able to successfully open the PDF attachment. But in some cases the mail is successfully received but while opening the attachment it is giving the error as file is corrupted.
Please help me to resolve this issue.
Thanks and regards,
Jayashree

Hi,
I would like to know what font type, you are using in the forms.
Ideally it should be HELVETICA .
If you are using any other font in your style/form,try changing it to HELVETICA & Test.
Also Check the OTF data at the call of gen. FM,before converting it to PDF.
Regds,
AS
Edited by: abheesawant on Oct 12, 2011 7:48 AM

Error while opening illustrator file : The illustration contains an illegal operand.

Few of the production machine at our office is showing error while opening some of the illustrator project files which were working fine a day before.
If the Executive continues to open the document after this error all the work is lost and it becomes blank document.
Has some one been through this issue and suggest any solution.
System Configuration
Mac OS 10.9.3
Intel CPU Core 2 Duo 3.0 Ghz
8 Gb Ram
%00 Gb HDD

sanket karalkar,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way.
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself, in addition to the ones you mentioned:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html

PhotoshopCS on Mac crashes while opening

Photoshop CS on Mac OS 10.3.9 crashes while opening reading
patterns - I beleive a large custom pattern has corrupted but I
can't get open to delete. Where do I find on my hard drive to throw
out?

Please check the system requirements:
http://www.adobe.com/products/photoshopelmac/systemreqs/
(a G3 might not be enough...?)
(guess trashing the preferences might not help either...?)
Regards
Nolan

Problem while opening ai cc

hi guys
I'm facing a problem when opening the ai cc on my laptop and the problem is that the ai shuts down immediately while opening it
for some informations : I use windows 8.1 , and my laptop requirements are good enough to open the ai cc
and thx

ifkfhf,
You may try some of the following (you are past 1) and 2).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error while opening Fla

Hello All
I have designed 1 web site in flash , now my clients want
some changes in that , but the problem is that file is not opening,
i have the source of that file but when i m trying to open that
file then i m getting error " error while opening file." i dont
know why its coming ? what will be the reason of that ? is it may
bcoz of version conflict ? pls help me.
Thanx in advance.
Dinesh
S Naidu Online.

hmmm - i doubt its a version conflict since you said you
built it - so it must be the same version
and the same copy of flash.
It is not uncommon for a FLA to become corrupt - in which
case, a back-up file is necessary.
Especially with client projects - i make periodic back-ups
daily - do a save-as with a new name is
recommended as well as copying files to different hard drives
and/or burning to disc. In a worst
case scenario like corrupted files, hard drive failure, act
of nature etc...you have a fighting
chance of not losing your work.
I often send upload the source files to a folder on the
clients hosting server to be even safer.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Snaidu Design wrote:
> Hello All
>
> I have designed 1 web site in flash , now my clients
want some changes in that
> , but the problem is that file is not opening, i have
the source of that file
> but when i m trying to open that file then i m getting
error " error while
> opening file." i dont know why its coming ? what will be
the reason of that ?
> is it may bcoz of version conflict ? pls help me.
>
> Thanx in advance.
>
> Dinesh
> S Naidu Online.
>

PSD Corrupts While Open in Lightroom

Similar Messages

Maybe you are looking for