PSD file blurry after render

I've posted this before and never could figure it out. It's only one PSD file that's doing it. I've tried changing the sequence settings to "render all yuv material in high precision yuv" and that did nothing. The vertical is divisible by 2, I checked and unchecked everything in the sequence render settings and my PSD still gets blurry after I render.
It's an 8-bit RGB and was originally an Illustrator file (RGB as well) that I converted to a PSD's. I have 13 other files and so far I've tried 2 others and they get blurry as well, but not as bad as this particular one. Please HELP!

Mike, you're probably right. But I seem to have this problem whenever I bring in psd's. And I keep trying things until something works. Unfortunately, I don't do this often enough to remember what the solution is. Perhaps editing the psd into a seperate sequence with field dominance set to none and then edit that sequence into your complete sequence. I know that I've solved this problem, just can't remember how. but resetting the field dominance to none will at least show the OP if he's on the right track.
I'll try the freeze frame thing next time, if I can remember....

Similar Messages

PSD file looks blurry after render

Hey all,
I've got a PSD logo (CS2) with an alpha channel. I'm dropping it on top of video (DV NTSC) with a Magic Bullet filter applied to the video. The PSD file looks crisp on the computer monitor until I render. Then it looks like I've applied a gaussian blur to the PSD file. I'm not working with an NTSC monitor so I'm not sure what's going to happen when I print to video. What's causing this?

The codec you are working with. A nice sharp image, when rendered in the DV codec, for example, will get VERY soft.
But you need an NTSC monitor to really see what it looks like.
Shane

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

Crystal clear b4 render,... blurry after render

Everyone is saying to render the timeline so I wont have the problem of the blurry pictures, but they look perfect before I render. When I render is when it becomes blurry now. I have tried to mess with these settings to figure it out. Is there a way to go back to default and start over. I am really not familar with this program. I usually use imovie, but the person I am doing this video for was not happy with how the quality of the pictures came out on that program. At first in Final cut, they look great, so I just do not understand it! Any help is appreciated!! Thanks!

http://discussions.apple.com/thread.jspa?threadID=957915&tstart=0
Alberto

Can I continue to edit in LR after exporting an image under edit. i see that my PSD file are now only JPG

Newbie at using LR. I tried my hand a first of images. I firgured out how to export to JPG but then found that in my LR I no longer had PSD file and all my editing Histroy was gone. I could see the JPG files.
Is there a way to print out (to JPG) incremental changes but still continue to work on the images?
Thnx

anpbaba wrote:
...I exported to JPG in my Hard disk. Unitl this point I could see all the edits I made in History and the actual photo showed as a PSD file. After doing the export, when I look at the history it is empty. and the file now shows as a JPG. This means that I cannot build on the previous edits.
Because you're new to Lightroom you might not have noticed that the selected image changed when you exported. But more than that, the selected image source in the catalog changed. In the Library module, I'm sure that when you were editing your PSD file, the folder it was in was selected. But after you do an export, that changes so that it says Previous Export shows in the Catalog panel on the left, and the only contents of the Previous Export is the one JPG, so that's all you can see right now. But if you were to go back and re-select the folder on the left with the PSD in it, you'd see your PSD again. And when you select the PSD, all the edits will be there.
So nothing is lost, it's just that you're now looking at a view that contains only the exported file.
If you exported the JPG to the same folder as the original, you can choose Library > Go to Folder in Library and you'll be back there with both the original and the JPG listed. There are other ways to get back to the preview source like the left Back arrow at the top of the Filmstrip if you have that open.

Not a compatible version of Photoshop...can not open my psd files...

After "save as" a psd file, I am unable to open it. "Could not complete your request because the file is not compatible with this version of Photoshop.".. "There was a problem reading the layer data. Read the composite data instead ?" It is no problem for me to open psd files but after saving it is not possible....?

martindyrlov wrote:
My version of Photoshop was newer trying save form an older version..Running Photoshop CC updated..
I don't understand if the older version was able to open the PSD it should be able to save the psd. I can believe an old version of Photoshop not being able to open a newer version of Photoshop save psd file when newer features were used and saved into a PSD file.
Your wording confuses me even the context does not seem to make sense to me.

Saving tiff or jpg files within a single, existing psd file without creating new files

     Hi, I just bought CS5 and I wonder if it is possible to save multiple images that are created within a single psd file in jpg or other image file formats without creating new psd files, but rather saving them as "embedded" within the single psd file in whih they are created. For example, one could select a portion of an image that one has created, and save just that selection as a jpg without leaving the existing psd file, and after that, one could select another portion of the same image and save it as a tiff, etc. Is this possible?
Much thanks.

No and Yes!
You can do much of what you want, but not exactly as you described it. You can certainly make multiple selections and have them saved in the psd file. You can also save jpg version of those selections, but you have to do a little extra work.
Lets say, by way of example, you have an image and you want to make three different selections within that image, save each selection as a jpeg, and save those selections along with the full image as a psd file. You can do the following, which is just one way of several to proceed, with your image opened.
1. Make selection 1, hit Ctrl+J to jump that selection to a new layer
2. Make selection 2, hit Ctrl+J to jump that selection to a new layer
3. Make selection 3, hit Ctrl+J to jump that selection to a new layer
4. Alt click on the layer with selection 1. This makes only that layer visible.
5. Click on Layer > Duplicate Layer > destination New > give it a name
6. This creates a new (temporary document). Open it.
     click Image > Trim > transparent pixels
     click Save for Web & Devces, select your parameters and save your jpeg
     Close and discard this temporary file.
7. Repeat steps 4,5 & 6 for selection 2 & selection 3
8. Save your psd file
You now have three jpegs and a psd file with all the information to create or modify the original selections
Paulo

PSD File Assiciations Fireworks CS3

Hi
Having lots of problems with Fireworks CS3 on PC (XP). Most
of these issues I can live with but the main problem is that I just
can't get it to associate with PSD files. After trying to do it
manually, the Fireworks icon shows on PSD files but when I double
click on the image icon it tries to open in Acrobat. When I
uninstall Acrobat it tries to open in Dreamweaver. When I uninstall
Dreamweaver it tries to open in an image viewer I have installed.
If I try to open it manually by going through the Folder
Options (or right click "Open With") route & click on
Fireworks.exe, it still tries to open in other applications
(Acrobat then Dreamweaver etc). Fireworks never shows in the list
of "Recommened Programs", so I need to browse for it.
Thanks for any help (Adobe & MS support could not help).

Can you not simple select it in File Type and choose
Fireworks and choose always use this program? That should work.

Photoshop CS3 shuts down after opening a PSD file with layers

Hello, I have met a problem with Photoshop CS3 (Windows XP SP2, no network printer) - after opening a PSD file with layers (saved with CS2) Photoshop shuts down. No error message.
Can some of you help me? (The only software that I have installed after Creative Suite CS3 is Corel X4. I have installed no upgrades of CS3.)

> I have installed no upgrades of CS3
You should!
Even if it doesn't help here you should.

I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite

I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite.

Can you open any file, i.e. jpeg, etc.? Have you installed the Apple legacy Java: Java for OS X 2014-001? I'm guessing you have because you wouldn't be able to open PS at all without it. But have to ask.

Can not open psd file after electricity failure!! help""

Please help me how to open psd file. I have been working on one project. It has been saved. After that electricity failure in our house happened and now I can not open it. It is saying: Could not complete your request because the file is not compatible with this version of Photoshop.
Thank you for help.

Have a look at this:
Salvaging damaged PSDs
Mylenium

File size extremely high for .avi after render PE 9

I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer). The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
Intel Pentium processor 1600 mhz
221 mhz, 2.00 gb ram
Microsoft windows xp sp3
video:
length: 0:27.261
frms: 817
Kbps: 28770
pic: 720x480
codec: dvsd dvc/dy
I appreciate any help you can give

Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
From: Bill Hunt <[email protected]>
To: Mid Century Modern <[email protected]>
Sent: Wednesday, September 28, 2011 6:07 PM
Subject: File size extremely high for .avi after render PE 9
Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
Good luck,
Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

Higher res pics placed or dragged into a 72 dpi .psd file are blurry

I have a project in which I am designing a website in Phtoshop at 72 dpi. Everytime I bring in a photo be it an AI file, or jpeg or even tif that is much, larger than the 72 dpi .psd file I am working in, the image becomes blurry as I scale it down. Why is this and what then should I be doing to get my images crisp for a final file that will be used to slice out web assets during the build.
Help please.

lschena wrote:
what then should I be doing to get my images crisp for a final file that will be used to slice out web assets during the build.
Just some idle thoughts:
One good trick is to sharpen images a bit heavily at higher resolution, then downsample them (e.g., using Bicubic) to the final pixel dimensions, then maybe add just a touch more small radius Smart Sharpen.
Another consideration is that maybe you want to start thinking about publishing images at higher pixel dimensions and using HTML to downsize them. This has the advantage of the images holding up well when browser zoom is used. Consider what people do when they want to see something more clearly on an iPad, for example - they use a reverse pinch gesture to make it bigger temporarily. It's more impressive if when one does that the image shows more detail.
Trying to have this stuff just happen automatically by dragging and dropping simply removes your fine control over how the image looks.
-Noel

Colours trouble with a psd file after import/export through Lightroom 4

I'm working with CS5, and I just bought LR4. I took a psd file (in Adobe 98 space) and I imported it in LR 4, and the exported as psd file in Adobe 98 colour space. Both files, the original one and the other after import/export, are quite different. The saturation of the res is not the same... When I repeat this experinece with a psd file in sRGB or in Prophoto, I have no difference betwwen both files.
I then conclude that LR doesn't recognize the adobe 98 pprofile of my psd file.
Is that normal, have you tried this experience, is there a bug in LR or a bug in the way, I proceed?
Best regards

When you import there is an Advanced button in one of the dialogs. Click that and you will be able to Paginate against chosen styles. That will break your document into topics.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

PSD file blurry after render

Similar Messages

Maybe you are looking for