PSD file import. Premiere doesn't show every picture?

Hey guys, I'm new to all this, so please go on and show me the right direction if I'm wrong here
I'm working on a project since a few months and I'm using the same Premiere File and the same PSD file since then.
Of course I'm changing the PSD a few times to, so I can actually put in more pictures in Premiere and do stuff with them!
But now, as my PSD file got a bit larger, much more folders, much more pictures, Premiere doesn't want to show me
every single picture!! What is wrong? Do I do something wrong now? Is it really because of the psd file being a bit bigger now?
If you need anymore information don't hesitate to contact me!
Greetings and happy eastern!
Mustafa

thanks for the advice JSS1138!
That is highly frustrating if I save every single picture, but if I haven't any choice I have to do that.
Is there any other option?

Similar Messages

  • Import dialog doesn't show files anymore (not even the ones on the hard drive)

    I shoot pictures with a D70 (canon) and i imported them always with no problems. After a update or installation of a external program the import dialog does not show any pictures anymore. It's a black screen. The files can be read from the filebrowser and are regular cr2 files (raw files). What can I do? There are 149 files on the card and non are shown, see below

    further in the forum I found this and it did the job
    I would suggest you to reset Lightroom preferences and then check the same.
    http://helpx.adobe.com/lightroom/kb/recover-catalog-images-resetting-lightrooms.html#id_90 046

  • 3D PSD file import : how to change 3D anchor point in AE ? Challenge..!

    Hello everyone,
    I've successfully imported a 3D file from Photoshop Extended CS4 into AE CS4. In AE, I can sucessfully animate rotation of the 3D object.
    Here's the problem : I cannot change the 3D object's anchor point. I've tried changing the anchor point's coordinates on the controller layer of the 3D object layer, the numers change, but the anchor point remains at its initial position, as if it was locked.
    I also thought changing the anchor point in PS Extended before importing the file into AE, but PS Extended does not seem to have an anchor point changing tool.
    So I even reasoned back one step : changing the anchor point in my 3D software since the beginning. Well, not possible because PS Extended seems to create an average position for the anchor point when impoting a 3D file from a third party software. So useless changing the coordinates in the 3D software.
    Photoshop Extended 3D is the only possible workflow to import 3D objects into AE that I know of.
    So, is is possible to change the 3D anchor point directly in After Effects ? What blocks that point from being changed ?
    This is quite a challenging problem, good luck for finding a solution ! I'm very sure that this technique is commonly needed and used when working in 3D, and that it will be of great help for many designers that want 3D in After Effects !
    Thanks again !
    Note : please do not confuse simple After Effects standard 3D layer, with the 3D PSD file import layer, these are two totally different types

    Any further forward with this anyone?
    This is driving me insane as well...
    I'm trying to create a simple comp within AE and have my clients logo fly on behind their text while rotating in 3D space.
    The idea is for it to rotate on the X axis, but rotate within the logo itself (straight through the axis within the logo itself)
    But when I try to rotate it, the AP is about 2.5 "logo depths" away from the logo, so when the rotation of any axis starts it looks ridiculous.
    Are Adobe really trying to tell us that moving the AP is not possible within AE for imported Live Photoshop PSD files?
    Hopefully a solution comes along soon as I cannot for the life of me figure out a workaround to the problem......
    Cheers,
    Paul.

  • Raw files for nikon d810 not showing a picture in preview. Have  camera raw plug in 8.6.0.250 . File will open in raw but no picture ahead of time.

    Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250  File will open in ACR and process but no picture before opening raw file.

    Are you referencing Apple's Preview application or the Preview panel in Bridge?  Huge difference.
    Try purging the cache for the offending folder(s) through the Tools menu in Bridge.

  • I can't open a picture from Lightroom to photoshop using Cmd E, photoshops opens up but doesn't show the picture to edit

    I can't open a picture from Lightroom to photoshop using Cmd E, photoshops opens up but doesn't show the picture to edit

    Ok I sorted it, by uninstalling and re-installing Photoshop

  • Error when importing psd files into Premiere Pro

    I am using Adobe Premiere Pro CS4 and Photoshop CS4.  Whenever I attempt to import a psd file I get this error message:  "File format not supported".  I have tested it with different file sizes and properties.  My files are RGB and 8 bits/channel.  Is there any way to resolve this problem?  I am also using Adobe After Effects and importing psd files works great with it. 
    Thanks

    Welcome to the forum.
    The RGB and 8-bit take care of two possible causes, so thanks for getting those out of the way early on.
    Does the PSD file contain Layers? Are any of them mostly Transparent, with just a few pixels, such as a small logo? Those have created issues.
    What is the exact version of CS4, that you are running? Seems that there WAS an issue with PSD's in an earlier version, and that a later update fixed that.
    There is another element with PSD's, that has caused issues, but my feeble mind is suddenly blank on what that was about. Seems that Colin Brougham commented on it not that long ago. I'll see if I can drege up one of those threads, but you might aslo want to do a Search on "PrPro" and "PSD," though the forum Search might still be broken. Maybe Google, and also look for replies from Colin. I'll do the same too. IIRC, one had to Open the offending PSD in PS, and just do a Save_As with a short file name, and a short Path (not buried deeply inside a sub-folder structure), and all was good, but do not recall any other details at the moment. I would also eliminate any spaces in the new file name, just to eliminate any issue there - use the _ like in the old DOS days, though do not think that one had to adhere to the old 8.3 structure.
    Good luck,
    Hunt

  • PSD file import: always the same layers no matter what psd file

    So, another problem has just popped up! Picture is, I imported a psd file into ae and made a cool vid out of it, which is all well and good. However, I decided to do a new one and as I imported the NEW psd file (as in COMPLETELY new, different file name with different drawings, different layer names etc) into ae... surprise surprise! The OLD psd file is displayed in the ae screen (???) It says it has imported my new psd file, but the layers and images displayed are from the old one (which, as I said, has nothing to do with the new one, except in matching canvas size).
    Thanks!

    How did you import and what exactly are you viewing? The source view? The comp view? The timeline layer view? Did you use "File --> Replace Footage"? Naturally, unless you actually replaced the elements, the latter two will keep showing your original PSD as they are referenced by the original project. Otherwise the source view should correctly reflect your new document. That aside I seem to vaguely rember an issue with this in some older version of AE (something with AE misinterpreting paths for identically named layers in different files), but since you did not make any mention of your AE version nor platform, operating system or hardware, it will be impossible for anyone to be more specific....
    Mylenium

  • Imported video doesn´t show up

    Hello people, I am a Flash beginner user
    I am trying to import a .flv video to my flash website
    I do it by choosing the "Progressive download from a webserver" option
    In the .swf file generated, the video runs normally , but when I run my website trough the index.html file and I go
    to the page where It is supposed to be, the video doesn´t show up, as if it never existed
    I don´t know what may be hapenning.
    Thank you very much.
    Best Regards
    rnucci

    Hello.
    I haven´t uploaded the website to the server yet,
    the video doens´t show up even when I run the index.htm file form my desktop !
    I ask myself if it might be a problem of layer order or something.
    If you wanna take a look at the website is this one:
    www.fgmf.com.br

  • Aperture 3 Import Dialog Doesn't Show Any Images

    Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
    Screenshot:
    http://dl.dropbox.com/u/1250153/a3.png
    Any ideas or fixes?

    Hello qua
    You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
    I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
    The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
    Regards,
    Gary

  • Exporting file as .doc doesn't show attached image

    I need to create a combined cover letter/resume as a Word doc. So I created a file in Pages with my cover letter and attached a pdf resume image. I created the resume in Illustrator and then saved the Illustrator file as a pdf. This image shows up fine in Pages file. I then Exported the Pages file as a Word doc, but when I go to view the Word doc or when I email the file to others, the attached pdf image doesn't show. I thought maybe I needed to embed the pdf image for it to show up in the Word doc, but can't find any info about it on the web. I really want to use the file I created in Illustrator because it contains some graphics that pertain to some of my skills listed in the resume. Any information would help.

    lilv
    Welcome to the forum.
    What do you mean by "attached"?
    In Pages you just drag the .pdf into the page and it appears as a graphic and that exports correctly to Word in a quick test I have just done.
    Peter

  • Itunes doesn't show every song i have

    Eeya guys,
    I'm experiencing a problem with itunes. When i start up my itunes and typ in the album of my newly downloaded minimal tracks. It only shows like 60% of the songs that are in there. So i tried to manually add them to the library by pressing "add to library" then click the desired song. But it won't add it. When i look in the directory where the itunes library stores it songs it also doesn't show the song. So i might be able to add them by coping the file from my music folder to my library folder, but my question is: why does itunes does this and maybe there are more songs which i don't know about that it also doesn't show. Hope someone got a solution for me, thanks

    Well, I have one episode of Top Gear series 14 and I want to buy the rest of the series but I don't want to buy each episode individually as it costs more. If I click the button to buy the whole series will I get I get the discount off from the episode that I already have and will it download all the episodes apart from the one that I already have.

  • Downloads window is blank, shows file name but doesn't show up speed, percentage of download etc.

    When I start downloading something, the Downloads window opens normally & also shows what is being downloaded. But, it doesn't show downloading percentage, downloading speed. (all things which usually show up below the name of file). But when minimized, I can see percentage.

    Worked for me too. options->options->privacy->remember download history

  • FCP X 10.0.9  Import Window doesn't show folders on desktop

    Hello,
    I have a number of folders on my desktop that contain movie files, jpeg files, you name it. When I try to import from the desktop, the import media window only shows the files and not the folders they are in! I have thousands of files on my desktop! For the life of me I can't figure this out. I have included a screen shot of what my window looks like when I select the desktop to import media. Again, I have a number of folders that don't show up, only the files in them. This is maddening when trying to import files! I know i can move the files to my hard drive but i am used to desktop work flow. Any thoughts? Thanks.

    I've not heard of this problem before.
    All I can suggest is to try trashing the preferences with this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.

  • Finder doesn't show recent pictures anymore

    My finder does not show pictures anymore that are imported in iTunes in the last months. What to do? This problem started some weeks ago.
    iMac 17"   Mac OS X (10.4.8)  

    MacAlf
    Does iPhoto show them? If so, right click on a photo and select 'Show File'. This will open a finder window with the file highlighted.
    If you want to access a file Drag and drop it to the Desktop, this will create a copy of the file there. Or you can use File -> Export, which will also create a copy.
    Remember, iPhoto is a database, and like all databases is designed so that you access the data - in this case your pictures - via the application, not through the Finder.
    It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
    A Note about the iPhoto Library Folder in v6:
    In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
    Originals are the photos as they were downloaded from your camera or scanner.
    (ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
    This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
    (iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
    Inside each of these folders there will be rolls arranged based on date.
    If iPhoto doesn't show them, then they have not been successfully imported.
    Hope this helps. If it doesn't. I suggest that you try the iPhoto Forum.
    Regards
    TD

  • Apple TV doesn't show all pictures in photo stream

    I have about 1000 pictures in my photo stream, but my Apple TV doesn't show all of them. It shows only 304 photos. How can I get all my photos to my Apple TV via photo stream? I have the latest Apple TV and the latest operating system on it.
    Edit:
    And I have tried to reset Apple Tv and photo stream.

    Welcome to the Apple Community.
    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

Maybe you are looking for