PSD files created using export data set fail to import into lightroom

If I create a set of files using variables in a data set, the PSD files won't import into LightRoom. LR says to resave with maximum compatibility, but I already have that set in Photoshop. If I open one of the files and resave it, it will import. Perhaps PS isn't honoring the maximize compatibility setting when exporting.

Hi,
I downloaded 10g database ver 10.2.0.1.0 from oracle site and installed it on my laptop. I took an export of schema which was on my 9i database ver 9.2.0.1.0 using 9i exp, created tablespace and user in the 10gdb and tried to import the same to 10gdb using 10g imp using the following.
imp system/pswd@10gdb fromuser=test touser=test file=expdat.dmp log=expdat.log
it displays
.importing SYSTEM'S objects into SYSTEM
.importing TEST'S objects into TEST
and it doesnt import any objects just hangs. The Log file does'nt have any entries.
Can anyone help me.
Thanks in advance
Smdas

Similar Messages

Process for exporting out of Aperture to import into Lightroom

I'm trying to convert a large library of images that is presently cataloged in Aperture 2.0 into a Lightroom 2.0 Catalog.
Aperture doesn't store the sidecar files with the raw files. Is there a procedure or plugin that will create sidecar files in the same location as the (raw) image files in a nested file structure, so that I can then import the images (where they are now on the disk) into Lightroom and retain all the information that was recorded in Aperture (e.g. star ratings, keywords)? There are many thousands of images, in a fairly complex nested file structure, and recreating the images or manually moving files where they need to be in the file structure would take many hours.
If there is a FAQ on this topic, can someone simply kindly point me to the FAQ? I tried searching but was unable to find anything useful. I found solutions that exported the master files (duplicating ALL the image files) with xmp sidecars but as noted above this would be problematic given the size and structure of the files currently in Aperture.
Thanks!

There are 2 big problems with the export/duplication route:
1) The files are in a fairly complicated nested structure, and they need to STAY in that nested structure.
2) The time and disk space required to duplicate the entire library.
I don't have iView, don't know enough about Applescript to do this myself. (If I did, I would have done it already after reading the threads here that referenced iView.)
This is *extremely* frustrating. If this is a simple thing (for someone with the appropriate skillset) to write a plugin for, Adobe should have an employee or associate developer do it to ease the transition for new customers coming to Lightroom with a library already cataloged in Aperture.

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

Exporting Data Sets as Files in CS5

Why would CS5 crash every time I try to export Data Sets as files? I have been just doing it in CS2 because of the problem. However, CS2 is acting up for some reason at the moment.
If CS2 where working, as it has in the past, then the exact same sets would export easily from there but not CS5. Is there any way to fix this problem?

Hello,
Yes I am running the latest version, on a mac. The Data Set is moderately sized, about 30 sets with 5 perameters (sorry if that is not exactly what they are usually called). It crashes while the data set is processing. After it saves a couple of files the system crashes. Sometimes it makes it a bit further, but never all the way through a whole set. CS2 is having all sorts of problems for me all of the sudden. I am going to look for my disk to unintstall then reinstall. It can't open files from File/Open and crashes within minutes of opening, even if I'm not doing anything with it yet. The only reason I have it is to run the Data Sets so I just hope I can find my install disk.
Thanks for any help!

PSD files created from running variables

When I run "export > data sets as files" the PSD files that are created can not be previewed by my Mac. Is there something about the file settings of the PSD files that is odd?

What are the side effects when using exp to create dump file, when the >database is up and running and users and making some changes?First of all, Export/import is a logical backup and not advised to used as a backup.
If there are no database activity,then its fine.
IF there's activity happening in the database and you still want to take an export, use consistent=y parameter during export. When this is enabled, EXPORT first
issues a SET TRANSACTION READ ONLY command before doing the export.
Check When to Use CONSISTENT=Y During an Export - Note:113450.1 from Metalink.

Export Data Sets as jpgs?

Is there a way to export data sets as jpgs instead of psd? The whole point is fast file creation and having a folder full of new psds which I then have to convert to jpg is kinda a silly step. Am I missing something?

I think because of the way variables work (at least the data set part), they need layers
( files that are not flattened) and jpegs don't support layers.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7417a.h tml
If your intention is saving different variations of your opened
file, you could use layer comps.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7870a.h tml
Then use export layer comps to files under the scripts menu.
MTSTUNER

Download using open data set and close data set

can any body please send some sample pgm using open data set and close data set .the data should get downloaded in application server
very simple pgm needed

Hi Arun,
See the Sample code for BDC using OPEN DATASET.
report ZSDBDCP_PRICING no standard page heading
line-size 255.
include zbdcrecx1.
*--Internal Table To hold condition records data from flat file.
Data: begin of it_pricing occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
f4(18),
f5(16),
end of it_pricing.
*--Internal Table To hold condition records header .
data : begin of it_header occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
end of it_header.
*--Internal Table To hold condition records details .
data : begin of it_details occurs 0,
key(4),
f4(18),
f5(16),
end of it_details.
data : v_sno(2),
v_rows type i,
v_fname(40).
start-of-selection.
refresh : it_pricing,it_header,it_details.
clear : it_pricing,it_header,it_details.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'C:\WINDOWS\Desktop\pricing.txt'
FILETYPE = 'DAT'
TABLES
DATA_TAB = it_pricing
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
WRITE : / 'Condition Records ', P_FNAME, ' on ', SY-DATUM.
OPEN DATASET P_FNAME FOR INPUT IN TEXT MODE.
if sy-subrc ne 0.
write : / 'File could not be uploaded.. Check file name.'.
stop.
endif.
CLEAR : it_pricing[], it_pricing.
DO.
READ DATASET P_FNAME INTO V_STR.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
write v_str.
translate v_str using '#/'.
SPLIT V_STR AT ',' INTO it_pricing-key
it_pricing-F1 it_pricing-F2 it_pricing-F3
it_pricing-F4 it_pricing-F5 .
APPEND it_pricing.
CLEAR it_pricing.
ENDDO.
IF it_pricing[] IS INITIAL.
WRITE : / 'No data found to upload'.
STOP.
ENDIF.
loop at it_pricing.
At new key.
read table it_pricing index sy-tabix.
move-corresponding it_pricing to it_header.
append it_header.
clear it_header.
endat.
move-corresponding it_pricing to it_details.
append it_details.
clear it_details.
endloop.
perform open_group.
v_rows = sy-srows - 8.
loop at it_header.
perform bdc_dynpro using 'SAPMV13A' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RV13A-KSCHL'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RV13A-KSCHL'
it_header-f1.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_CURSOR'
'KONP-KBETR(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMG-VKORG'
it_header-f2.
perform bdc_field using 'KOMG-VTWEG'
it_header-f3.
**Table Control
v_sno = 0.
loop at it_details where key eq it_header-key.
v_sno = v_sno + 1.
clear v_fname.
CONCATENATE 'KOMG-MATNR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f4.
clear v_fname.
CONCATENATE 'KONP-KBETR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f5.
if v_sno eq v_rows.
v_sno = 0.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=P+'.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endif.
endloop.
*--Save
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_transaction using 'VK11'.
endloop.
perform close_group.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Is there a way to load a movie file created using FlattenMovie() function ?

Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

Hi telsenbroich,
Have a look at this response
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
Regards
Ray Farmer
Regards
Ray Farmer

How to use open data set in SAP

Hi SAP Gurus,
        Could anyone help, how to use open data set in SAP.
      I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
Thanks & Regards,
Krishnau2026

Hi Krishna.
These are the steps you need to follow.
tables: specify the table.
data: begin of fs_...
        end of fs_    " Structure Field string.
data: t_table like
        standard table
                  of fs_...
data:
w_file TYPE string.
data:
fname(10) VALUE '.\xyz.TXT'.
select-options: if any.
PARAMETERS:
p_file LIKE rlgrap-filename.
w_file = p_file.
select .... statement
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT t_... INTO fs_....
write:/ .....
TRANSFER fs_... TO fname.
or
TRANSFER t_... TO fname
ENDLOOP.
CLOSE DATASET fname.
Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
Regards Harsh.

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Import error when importing .psd file created in Photoshop CS3

I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
- If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
This process takes about two hours because I have a lot of components on the page.
Is there something I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

Can I open psd files created in Photoshop CC with lower version? Actually CS5.

Can I open psd files created in Photoshop CC with lower version? Actually CS5.
My home and office have different version each.

Yes, PROVIDED that the file has not been saved with any layers containing any of the specific new features introduced starting with Photoshop CC and higher.
If the file has been flattened or if it was flat to begin with there will be no problems.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

Info needed on how to design xcelsius dashboards using SAS data sets.

Is it possible to design a xcelsius dashboard using SAS data sets? Any info on this subject is highly appreciated. Thanks.

Hi,
I am not much aware of the SAS datasets, but i can definitely provide some pointers on what data Xcelsius could consume.
Assuming you use Xcelsius 2008 - you can have static data within the embedded excel sheet..
You can recieve dynamic data using
1. QAAWS
2. Web Services
3. XML data
4.Live Office
and more....I am sure some of the Gurus could provide better pointers.

PSD files created using export data set fail to import into lightroom

Similar Messages

Maybe you are looking for