.psd files dose not open with Camera Raw

I noticed that if you have a ".psd" file even if it is Flatten, it will not open in camera raw. I can easily save it to a Tiff or other formats and open it in camera raw, but I wonder why .psd file dose not open in camera raw
Thanks

Yes, Trevor, you can indeed opened a non-layered PSD in Adobe Camera Raw—at least in perpetual-license CS6 and earlier, I don't know about the Cash Cow subscription version 14.x which I'm not going anywhere near.
What you cannot do is open a PSD in Camera Raw by double clicking on it. You just have to go through File > Open menu item and its dialog box.
Once you are in the Open dialog box, select the PSD file you want to open, go to the File Format button on the lower left-hand corner of said dialog box and from the list of formats available in the pop-up menu choose Camera Raw. The Open button on the lower right will become active and you can then open your file in Adobe Camera Raw.
Just be sure not to choose the "Photoshop Raw" format from that list of formats in the pop-up menu. "Photoshop Raw" has nothing to do with digital photography at all; it's an ancient, obsolete file format that no one should be using these days.

Similar Messages

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade. Try reinstalling Photoshop CS5.

I just installed elements 11 with camera raw 7.1. My photos from iPhoto will not open in camera raw

I just installed elements 11 with camera raw 7.1 in my iMac. My raw photo files from iPhoto will not open in camera raw. The elements screen opens without a photo, but camera raw willnot open. Help.

You need to tell iphoto to send raw files out of iphoto or it will make its own conversion and send a pre-converted file. Go to the iphoto preferences>advanced and turn on this checkbox:

Open with camera raw is gone, any ideas?

Open with camera raw is gone, any ideas thanks?

AND FROM THE FINDER:
Kevin, you keep trying to open files in ACR using the right mouse click menu in Finder and it will never show up. Use Bridge, select the file in the content window and then use right mouse click on a supported file.
Supported are Raw files according to the list provided on this page:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
And jpeg and tiff if you have set the camera raw preferences to handling jpeg and tiff files.
But this works only in Bridge because ACR is a plug in that opens in PS and Bridge. If you choose to the Open With Route you always open ACR in Bridge.
Setting jpeg and tiff to 'open automatically with settings' means that if you have previous applied ACR settings (the icon for it shows top right of the thumb) you are able to double click or use open to open the files in ACR using PS.
Setting the prefs to open jpeg and tiff always in ACR means you can use the same options for opening Raw files, but this is not recommended because opening a simple jpeg file in mail or whatever also opens the file first in ACR instead of PS.

PSE 9 does not come with Camera Raw 6.2?

Photosho Elements 9 does not come with camera raw 6.2
, I downloaded the trial version which came with an outdated 6.1... the only version of 6.2 is for PSE8 and does not work with PSE9 how is this possible? How can they release a product with an outdated ACR????Now we have to wait for an update to a new product???Come on people!!!

Cheap shot, Phil. Up to now, Mac users got no Organizer but a special bonus: full Bridge, full access to full featured ACR. With this version, both platforms get the same stuff -- it's less than full Photoshop/Bridge CS5, at a small fraction of the price.
I admit, as a Mac user who shoots RAW, I liked the old trade-off...but I can understand the desire to make the two products consistent. If that makes PSE "inferior" for you than you should stick with Bridge CS4/Raw 5.7, or move up to the full-featured siblings, or switch to Lightroom.

My NEF files used to open in camera raw 8.6 but now go straight to photoshop CS6? I don't have the option to edit them in camera raw? Help

My nef files used to open in camera raw 8.6. Now when I drag and drop they go straight to photoshop cs6. I don't have the option to edit them in the camera raw editor! Help!

Which operating system are you using?
What is your screen resolution set at?

NEF files not opening in camera raw in CS5

I have lightroom 3.2 and photoshp CS5 extended
I am running if 64 bit in Windows 7
If I try to open a .nef file from lightroom usinf crtl-e it does not open in the raw editor. it goes directly to what I would call the jpeg editor.
Now can I get my .nef files to open from lightroom into CS5?
If I open the .nef file from bridge it opens in camera raw just fine, or if I open it from windows explorer it opens in camera raw.
Help! this is very frustrating!!
Thanks in advance.

If LR is 3.2 and ACR is 6.2 (or they are otherwise synchronized to an older or newer version) then LR will tell PS to use ACR behind the scenes to render the file on the way into PS w/o having to go to an intermediate file and w/o seeing the ACR interface. LR does not render anything, ACR does, but you don't see it, except maybe a progress bar if it takes too long.
The adjustments in LR are the same as ACR so there's no need to show the ACR interface, right? When LR and PS are being used together, LR is meant to be the keeper of the adjustments in its database that ACR knows nothing about. If the ACR UI was visible and you tweaked something in ACR after coming out of LR it wouldn't get stored back into the LR database unless you synchronized the folder, later, and things would be a confusing mess.
Alternatively, if the LR and ACR version's aren't synced up, then LR may indeed render a TIF or PSD for PS to open, but again w/o ACR doing anything. So in no circumstance of LR-PS integration should you see the ACR plug-in when you tell LR to open into PS.

Opening files tiff files from desktop always open with Camera Raw with Photoshop 2014

Why do my desktop tiff files which in the previous version of PS CC, opened directly into Photoshop (File>Open), but with PS 2014 always open into Camera Raw first? Is there a setting/preference that needs to be changed?

Preferences - Camera Raw...
Under JPEG and TIFF handling, change to "Disable TIFF support" to have images open straight into Photoshop.
Edit: R_Kelly, you beat me to it.
-Noel

No options in Bridge or Photoshop to open with camera raw

Photoshop CC 14 installed. I do not get an option to open in camera raw from bridge or from file/open in photoshop. I am trying to batch work on PSD documents from camera raw but cannot open them in camera raw.

That would be right. You can't open PSD files in ACR. How would ACR deal with layers, along with all the other features embedded in a PSD file?

Tiff previously edited in ACR will not open in Camera RAW from Bridge

Yes, I have googled this and found instances going back to 2010 with no satisfactory answer. I have Photoshop 5.1 and the latest ACR and Bridge that work with it. 2011 MAC Mini 10.8.2.
I scanned a landscape oriented printed email image at 800 spi as a portrait orientation and saved it as a tiff. I opened this tiff in Preview and decided it needed more than minor tweaks so I opened it in ACR from Bridge, made a few adjustments and saved it. I thought I could see what I was doing better if it was in landscape orientation again so I opened it in Preview and rotated 90 deg CCW, saved it as a tiff. Going to Bridge I found Open in Camera Raw greyed out. I went back to Preview to see if I could get what I needed in its Tools while viewing it in landscape. Adjustments took forever this time, so I gave up and took a look at the image characteristics. Rotating in Preview had changed the image size to 3.3333...... times larger at 240 ppi still aRGB, still a tiff. This has never happened before, including slow adjustments
I duplicated the rotated file and changed it back to 800 ppi and normal size, went to Bridge, Camera Raw still greyed out. Original unrotated image
that had been edited in ACR and saved will still open in ACR.
All kinds of strange things have happened since updating to 10.8.2, but I don't think this is one of them because of the complaints I have seen that date back to 2010. I did a full maintenance routine, i e cleared RAM, reboot in single user with fsck -fy, repaired permissions, back up with SuperDuper which repairs permissions again. Then I tried Bridge again, original will open, rotated won't.
Anyone know the answe?

The answer is that making edits in ACR and saving it creates layers in the tiff and Bridge will then not open it again in ACR unless you flatten it. I still don't know why Preview increased the image size by 3.333.....x or why ACR increased the tiff file size by 2.6x and why the flattened tiff is 2x the file size of the original scan but the image dimensions are the same. This stuff apparently is above the pay grade of anyone in google, too.

PhotoShop CS6 .psd file currpt/not open :( my lots hard work

Hi Friends,
Today Accidentally my photoshop has closed at that time i am working on my demo template work from last 2 months, so again i open my .psd file thier is error prompt “could not complete your request because the file is not compatible with this version of photoshop”.
Several time i try but it can’t open my .psd file. if anyone face this type problem or have any solution to solve this i will be very thankful to you, of-course its my two months hard work.
Thanks

Here's a good trick that's works in many cases. You'll be using Fireworks to open, and re-save the Photoshop file. This will fix most corruptions.
Open the corrupt Photoshop file in Fireworks.
Use Fireworks to save it as a .psd Photoshop file. (Important: Do Not save it as a Fireworks file or another extension, because Photoshop may not recognize the layers, or you could lose data.)
Remember to give your file a different name when saving, so you won't overwrite your original. (A good idea would be to create a backup of your original before trying this procedure.)
Open your newly created file in Photoshop.
Remember that many effects will not show in Fireworks, but should show up in the Photoshop layers.
If it doesnt work, try to look at the answer here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/590-restoring-a-corrupted-ps d-file
Try some repair tool:
PSD Repair Kit is the ultimate Adobe PSD repair tool that is a must-have for any digital artist, photographer or other professional working with numerous PSD files.
For more information: http://www.psd.repair/

LR3 DNG Edit in Photoshop Does Not Open in Camera Raw

I have LR 3.2 64 bit and CS5 v12.0.1 64 bit and Camera Raw 6.2 under Windows 7. I do 95% of my editing in Lightroom. I do occasionally choose "Edit in Photshop" and in the past a DNG or CR2 image opened in Camera Raw (at least I think that is the case). Recently however, I noticed that if I have a DNG or a CR2 file, right click, and select "Open in Photoshop..." it opens the file directly in Photoshop, not in Camera Raw. I have tried deleting my LR3 preference, deleting my CS5 preferences, and deleting both, but the behavior does not change. Does anyone have an idea to explain this?
Thanks,
Alan.

Thanks for the quick response. For some reason I was thinking that it had happened that way in the past, but now that I think about it, I guess there would really be no reason for it to open in Camera Raw. Sorry for the unnecessary question.
Alan.

Smart Object Not Opening in Camera RAW in CS6

I've converted a JPEG to a Smart Object in CS6. When I double-click on the Smart Object icon in the Layer, it opens as a separate JPEG file. What do I need to do to get it to open in Camera RAW as Russel Brown does in this video?

R_Kelly wrote:
JJMack might have been referring to the script and video that is on the script page i linked to.
I did not know about the script. I just knew that ACR can only work on Camera RAw Files and convert the camera sensor RAW data into RGB Images and use setting other then ones set into the camera, ACR can also process Jpeg and Tiff files however Camers Sensor RAW data for thes images nolonger exists in the file. So ACR can not work on the images as well as it can when it has access to the Camera RAW data.
I was somewhat wrong about not being able to edit normal layers in ACR this script sort of makes that posible. What it does is save information about the layers transparenct and layer mask save out the layer as a temp Tiff file and place it back in as a smart object and restor the best it can any layer mask and transparency. You preferences must be set to open Tiff in ACR. While I was somewhat wrong I was bassicly right. The script turns the layer into a Temp Tiff file and places it back in the document as a smart object layer the embedded object is a Tiff file. The temp Tiff file is nolonger needed for the smart object layer has a copy of it in its embedded object.

Few 5DmkII RAW files do not open with Aperture, but OK with other software

Hi, I have two RAW files which I cannot import with Apple Aperture. The files open fine with Canon Digital Photo Professional, Raw Photo Processor and dcraw (and with various programs on my Windows 7 laptop) and I'm able to create TIFF files from the RAW files with every other software.
Detail about the files:
A. they are two first frames of burst (used auto bracketing, which takes 3 images in burst mode, to create HDR image)
B. there is nothing strange in the files, they are normal RAW files and file size is normal as well (other 28.4MB and 32.7MB)
C. both files process OK in above mentioned softwares and there are no blocks missing from created TIFF images, also preview JPG in the RAW file is OK
D. Mac OS X Quick view (press spacebar in Finder) and Preview do show these two RAW images well (I assume they use the embedded JPG image)
I have installed all the updates available in "Apple icon" -> "Software update..." function. Therefore I have Apple Aperture version 3.0.2. Computer is MacPro:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 12 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
How I can submit the files for Apple to create fix? I searched for Apple Aperture support but there is only this forum, no email address or anything. Do they read this forum?

Some clarifications and answers to your questions:
First to Tony Gay:
I try the feedback later today even they claim "Please know that while we do read these submissions, we cannot guarantee a personalized response.", which is original reason why I'm why I wrote this question here. The url you provided did not work but this should:
http://www.apple.com/support/feedback
This is not relevant to sRAW files, I did not change the between camera taking automated bracketed shots the image format for 2 shots to sRAW and took 3rd with RAW, that is not even possible.
I have copied the images from card to hard drive, not trying to read from the card itself. However now you mention tried also from card = exactly same result. Tried desktop (different HD) and external USB and external eSata, all same result.
Get info doesn't show anything wierd for the images. All other 192 RAWs from same shoot were imported with exact same methodology (as well as 60000 images before that).
Then to gosuk2:
There is no HDR setting in camera, I took the images FOR HDR, but did not use any specific setting, just used 1 1/3 stop bracketing and 2 second times when camera automatically takes 1 1/3 underexposed, correct exposure and 1 1/3 overexposed image (the order of images can naturally be changed via custom function in camera). All this is unrelevant since I shoot quite often HDR with this method (=more than 500 images each month) this way and they have always been fine before these two images.
I see the files in import panel and I the don't use import dublicates setting so that doesn't affect the situation (why it would, Aperture things files are broken).
Again HDR cannot be combined in 5DmkII, it's just automatically shoot 3 bracketed shots.
No I don't get same result no matter what I do, it's just these two files. My other ~5000 HDR bracketed RAWs are importing fine as well as all burst/shots taken in continous shooting mode.
I'm very aware how stacking of images works, but I do not understand relevance to this issue. I can not import the images at all to Apple Aperture, after importing all images Aperture displays dialog saying that following files could not be imported to Aperture, then displays list with both of these files in the list and gives possibility to locate the files in Finder.
I have used Aperture since version 1 and I have 70000 images imported successfully to Aperture. Earlier I have seen this dialog "Aperture could not import image" only after hard drive/card failure. However then images cannot be used in Canon's DPP (Digital Photo Professional) or any other RAW software - now the problem ONLY EXISTS in Aperture all other RAW converters are able to open and process SUCCESSFULLY these images.
So I'm not whining that Aperture is not good, but if it starts to work only part of the images in future and I have to process rest of the images with Canon DPP (that program is really lousy on usability standpoint) then I'm not so happy with Aperture anymore.
Will report here if I get any comments back from Apple through the Feebback tool.
Message was edited by: vahonen (due to forum software replacing words like s u c k s etc. with ***)
Message was edited by: vahonen

.psd files dose not open with Camera Raw

Similar Messages

Maybe you are looking for