PSD images in PSE 13

Just downloaded PSE 13.  Preview images in files are showing as white sheet paper.  How do I fix this?

preview is so valuable when using pse..  I am having the same problem ...  i hope there is a quick fix for this!

Similar Messages

  • Batch Psd image conversion into jpegs in pse 10 or 11?

    I want to batch convert some .psd images  into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another.  Thanks!!

    Unfortunately, you have posted to the Photoshopn (PsE's big-brother) General Discussions Forum. There is a very good, and active Ps Elements Forum, where your question will be answered. I will Move your thread to the Ps Elements Forum, and your link, plus any e-mail subscriptions will follow.
    Good luck,
    Hunt
    [Moved to Photoshop Elements Forum]

  • Batch converting psd images into jpegs in pse 10 or 11?

    I want to batch convert the above. I know i can convert one image at a time. If not can one recommend a batch conversion program which is safe to use and free from viri  and malaware.  Thanks!!

    And when you are in the process multiple files menu what do you select from their to do the batch processing of the psd images to the jpeg images.   I need a step by step here.  Thanks!!

  • What to do with a psd image in Modified folder that I can't see.

    With an original jpeg image I modified the image in PSE (which is set as default editor in iPhoto) using layers. I did a Save. The psd is in my modified folder but is not displayed by iPhoto. I understand that I should have used a Save As (eg to desktop) and imported that image back to iPhoto.
    Is it OK to move the psd image out of the Modified folder to desktop and then import it back into iPhoto? Thanks,
    Owen

    Owen
    Yes.
    Regards
    TD

  • Opening an image with PSE 11

    When i try to open an image in PSE 11 from Windows explorer by choosing "right click" - "open with Pse 11" the editor starts but does not open any file.  This was not the case in previous versions of Photshop Elements.  Any idea why this behaviour?  
    ..Bjorn

    Solved.
    After PSE11 installation the image files would open automatically with "Adobe Photoshop Elements 11.exe" and not
    "PhotoshopElementsEdtor.exe"  I changed file association to the correct program and it works fine.
    I have been running PSE sins since version 06 but first time i can reon. having to do this change.
    (Raw files however open correctly even pointing to the  "Adobe Photoshop Elements 11.exe" no change necessary)
    Thanks for Your help

  • Photo/Edit-In CS6. psd image does not show in LR after save/close.

    Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

    This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
    If the behavior you describe follows a <save> in CS6 it is not normal.
    This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Transparent PSD image in Illustrator changes color of vector background after print.

    Hello, I really don't know how to explain this so I'll just upload my files which are located here: http://rapidshare.com/files/4040672260/Green%20circle.rar
    I have a green vector background in illustrator and then I placed psd image over it and created PDF for press and under Color bitmap images I selected no compression.
    After viewing image in Acrobat all seems ok, I even checked with picker, but after I send this to printer (xerox in thsi case) I end up with this: .
    Both .psd and .ai are in CMYK color space. For this particular case I could use mask to cover up that transparent space but my original project has shadows which I cannot mask by vector :S.
    Can someone plz explain to me what I am doing whrong or how to set color profiles or whatever is neccessary to avoid this issue. One thing I was using was, opening PDF in Photoshop and flatening all. Problem is that sometimes I need vector files and cut lines for cutter. Don't want to have bitmap, if I can have a vector? Also when I flaten image I do get same CMYK values in photoshop (with picker) than I have in Illustrator on vector object, but when I print this they don't match at all.
    Does someone know a solution?
    THANKS in advance and sry for my bad english.
    Stefan

    Nothing worng with your .ai or .psd file, prints fine here. Problem is with your tranparency flattening.
    Most likely you can fix that by print >>  Advanced >> Custom >.> Move slider all the way towards rasters.
    If you need more help, let us knwo your printere, and screenshtos of your print settings can help.

  • Where is it best to store all imported images in PSE? I've recently changed it and got myself in a complete mess.

    Where is the best location to store imported images in PSE? And if I cannot locate files will I be able to find them after changling the stored location?

    lets use tb31... I just don't remember V7 all that well
    Now when you receive a mail with remote images do you see the options button in the attached image

  • Changing color of Image in PSE 8.0

    I have a logo design that is black on white.  I'd like to change the black to another color - in this case, blue.  I wqas able to do it, but it ended up being quite convoluted.  What are some simple ways to change the color of a selected area in Elements 8.  I'm using a PC, BTW.
    Thanks!

    Thank you.  I found another way that's even simpler.  I chose the paint brush, set the mode to lighten, and then just painted over the image with blue - the white didn't pick up any of the blue, but the black did.
    Date: Tue, 22 Feb 2011 17:02:09 -0700
    From: [email protected]
    To: [email protected]
    Subject: Changing color of Image in PSE 8.0
    1. Select the black (use the magic wand if it's all one color).
    2. Layer>New Adjustment Layer>Hue Saturation.
    3. Turn on the colorize checkbox in the layers panel, and move the sliders till you see the color you want.
    >

  • Certain psd images are saving darker as jpegs

    I use Photoshop CS3.
    Certain psd images are turning out darker after I save them as jpegs. The shadows are far more predominant and the images are significantly darkened. This only happens with photographs that I have edited over the past two or three days. All photographs that I have edited four days ago or more save exactly as they appear in photoshop. There is no darkening whatsoever. I can't figure out what is causing this recent batch of photographs to save differently.
    Both batches are RGB 8 bits, Color Mode 3, with an ICC profile of sRGB IEC61966-2.1.
    Thanks.

    Is your display profiled and calibrated, and if so, what software/hardware did you do this with?
    What version of Windows are you running?
    It sounds as though your Windows Photo Viewer may not properly be using the document and monitor profiles to do color-management.
    Windows Photo Viewer has been color-managed since at least as far back as XP SP3, but I'm wondering if your monitor profile just isn't being interpreted correctly.  Perhaps it's in a format your OS software can't handle.
    -Noel

  • Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

    Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

    One thing to check is that your PSD is RGB/8 or /16, but not /32  (32 bits per channel)
    If that is not the problem
    Let's try this:
    Close Adobe Photoshop if it is opened.
    Find the following:   (windows user can hit windows key + r, then in run cmd line type "%appdata%" to locate your "AppData\Roaming" directory)
    \AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Preferences CC Settings
    Rename the  "Adobe Preferences CC Settings" folder to "Adobe Preferences CC Settings_old"  so that preferences settings can be recreated.
    Reopen Photoshop CC and open a new or existing file to verify that your "save for web" option is back and not grayed out.

  • LR4 psd image can not be found

    Have a dng image in my Catalog:
    A
    1. Edited it using PS CS6
    2. Saved it as psd image
    3. The psd image appeared in the Catalog, but with a question mark in the upper right corner -  viz., it could not be found 
    4. The image also appeared in Windows Explorer
    B
    1. Saved it as a tif image
    2. this image appeared in the Catalog without the question mark!
    C
    1. closed and reopened  LR
    2. closed and reopened Win 7
    3. uninstalled downloaded and installed new copy of LR
    4. All to no avail!!  The psd image still shows in catalog, but can not be found!
    I have other psd images in the catalog that LR can find!
    Called Adobe Online Support.  They could not help. 
    Any help would be appreciated.
    Chuck

    chandu04 wrote:
    Hi,
    I am new to crystal reports.
    I am using
    Crystal Reports XI
    jdk1.5.0
    JBoss4.0.4GA
    MYSQL5.0
    When i access a method in another class from implementation class, it gives error. all the jar files
    are available as i know. calling and called classes are in the same package.
    I give the error details bellow , please help me.
    C:\Java\jboss-4.0.4.GA\server\default\deploy\AMS.ear\reports\raactualrpt>javac RaActualRptImpl.java
    RaActualRptImpl.java:87: cannot find symbol
    symbol : class RaActualRpt
    location: class reports.raactualrpt.RaActualRptImpl
    resultSet = HibernateUtility.getProjectedEntity(resultSet,(new RaActualRpt()).getColumns(),reports/raactualrpt/RaActualRpt);
    You need to make sure that the RaActualRpt class is in the classpath either through the environment variable or as a javac option. Also make sure you import it if it is not in the same package as RaActualRptImpl

  • .MOV to .PSD image shift...HELP!!!!!!

    I have a .MOV and a .PSD file of the same image, the .MOV is of the .PSD image animating into its place on the .PSD. However when the track (.MOV) jumps to the Layered Menu (.PSD). there is an image shift. How do I prep the files so that the uncompressed quicktime movie and the photoshop file will line up seamlessley?
    Any help appreciated!
    Bill

    I don't know enough about how you applied the motion to tell you exactly why this happends, but I have clue:
    If you are animating the motion in FCP in an uncompressed sequence, the frame size will actually be 720x486. When this gets encoded to mpeg, it gets cropped to 720x480, 4 lines top and 2 bottom, to keep the field order the same.
    I start with a 720x486 file in photoshop, and then manually crop it 4 top and 2 bottom to prepare the version of the still file for the DVDSP menu.
    I might also recommend simply extending your motion quicktime to include the still at the end. It should only add a minute of video to your disc. You can even set the menu in DVDSP to a stilll at the end, as opposed to looping.
    Another thing that can effect positioning of photoshop layers in FCP or DVDSP is if there are any pixels on the layer outside the bounds of the canvas. A quick "select all-image:crop" will eliminate this.

  • Newbie: Change PSD image pulled from an existing website via DW (CS4)

    I need to make a minor change to an image created in photoshop.
    The image is from a website I took over from another designer and downloaded to Dreamweaver, and I successfully uploaded the image to Photoshop. However, since the image (in this case, the website header) is flattened, the only way I know to make the update I need is to create a "patch" for the part I need changed and try to match the font, color, and other elements.
    Since I did not create the original file I do not have the layered version.
    I have a number of sites to update with the same challenge. Is there an alternative to either creating the patch or having to reconstruct the PSD image from scratch?
    Thanks in advance for any advice -
    KE

    I would rebuild the file.

  • After a 10.0.3 my PSD images are not recognized ?

    I installed the update 10.0.3 because I really need the new incrustation fonction in my project.
    But I used a lot of PSD images in it , who were perfectly recognized in the 10.0.2.
    But after the upgrade all my files PSD were not recognized and a big part of my work is crashed :-(
    Is it normal ?
    May be I have something to do ?
    But I don't find answers on apple web site....
    Please help...
    Thanks

    yes and no. I tried more than one files. Usually there is no problem, you are right. But if you try pictures with parts that are white or very light you cansee the problem. There are black borders around white parts and if you have a white flow it turns grey.
    Maybe I can describe the problem by showing the results. The first was was made with 10.0.2. look at a white sceen in the middle at 17seconds - 18seconds:
    http://www.youtube.com/watch?v=bRYPqe4vlqk
    now: the same thing done with 10.0.3. now you can see she shades in the white parts of the picture.
    http://www.youtube.com/watch?v=53plztoiOMY
    0:17 seconds to 0:18 seconds

Maybe you are looking for