.psd images incomplete

When I import images I've worked on in Photoshop Elements 3 into iPhoto, they usually go OK, whether jpegs or .psd. But sometimes a portion of the image turns out black, as if masked. For example if I've desaturated a background, that part imports looking black. I hope I'm explaining this properly.
Thank you for suggestions!
Sarah

Tried to desaturate an image, with text as another layer, and did not get what you're experiencing. However, if you change the mode of the picture from color to grayscale iPhoto will display it like a negative.
Are you aware you can edit a photo with PSE from within iPhoto? Just select PSE as the application to open when you double-click on an photo. Use iPhoto's preferences to do that. The only caveat is you must not change the name or the extension of the file. if you create a layered image from a jpg file requiring a change to the .psd extension you must save it to the desktop and then import from there. Other than that it's seamless.
OT

Similar Messages

What to do with a psd image in Modified folder that I can't see.

With an original jpeg image I modified the image in PSE (which is set as default editor in iPhoto) using layers. I did a Save. The psd is in my modified folder but is not displayed by iPhoto. I understand that I should have used a Save As (eg to desktop) and imported that image back to iPhoto.
Is it OK to move the psd image out of the Modified folder to desktop and then import it back into iPhoto? Thanks,
Owen

Owen
Yes.
Regards
TD

Photo/Edit-In CS6. psd image does not show in LR after save/close.

Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
If the behavior you describe follows a <save> in CS6 it is not normal.
This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

Transparent PSD image in Illustrator changes color of vector background after print.

Hello, I really don't know how to explain this so I'll just upload my files which are located here: http://rapidshare.com/files/4040672260/Green%20circle.rar
I have a green vector background in illustrator and then I placed psd image over it and created PDF for press and under Color bitmap images I selected no compression.
After viewing image in Acrobat all seems ok, I even checked with picker, but after I send this to printer (xerox in thsi case) I end up with this: .
Both .psd and .ai are in CMYK color space. For this particular case I could use mask to cover up that transparent space but my original project has shadows which I cannot mask by vector :S.
Can someone plz explain to me what I am doing whrong or how to set color profiles or whatever is neccessary to avoid this issue. One thing I was using was, opening PDF in Photoshop and flatening all. Problem is that sometimes I need vector files and cut lines for cutter. Don't want to have bitmap, if I can have a vector? Also when I flaten image I do get same CMYK values in photoshop (with picker) than I have in Illustrator on vector object, but when I print this they don't match at all.
Does someone know a solution?
THANKS in advance and sry for my bad english.
Stefan

Nothing worng with your .ai or .psd file, prints fine here. Problem is with your tranparency flattening.
Most likely you can fix that by print >> Advanced >> Custom >.> Move slider all the way towards rasters.
If you need more help, let us knwo your printere, and screenshtos of your print settings can help.

Image Incomplete Nightmare

Recently I've been working on a project and when I try to burn the disc, I get an error message that says, "image incomplete". When I try to save the image I get two error messages. The first says something about, "dual-layer disc image compatibly". I'm not too worried about that one. The next error says,"Errors in project". In the drop down menu of this error is says,
"The following warnings and errors were found during the validation of the current project:
- There appears to be a broken asset in your project. Correct this problem before burning this project.
- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project."
I checked the "Map" and no errors are shown. The movie is about an one hour and 25 minutes. I have about 59 gigs left on my hard drive. I have tried just about everything to make this work... Any suggestion would be appreciated.

Here's what it looks like...
The main menu.
Chapters
And here is the biography page (there are 2 more sub menus from this page that look just like this one)
And here is the map

Image incomplete

Hi,
Thanks in advance for any help. This is the first time I have any problems with iDVD burning discs.
I have an 86 minute, 2.6 gb iDVD movie made in iMovie, all 06 versions.
It ejects disc and says "current operation", "image incomplete", after normal burn time. I have burned 100's of discs and have never had this problem. I tried cleaning up permissions, restart, log out and back in, clean cashe, I also freed up some hard drive memory. I have tried both internal and external DVD burners. I forgot about the old and tried method of deleting preferences and did this too, and I am trying a new burn. I did not change anything before this problem happened.

Hi
Did You select an encoding version that can handle > 60 min eg Best (High) Quality.
Do You have minimum 25Gb free space on internal (start-up) hard disk ?
Has to. iDVD can't use any other as scrap-disk neither can Mac OS.
*Not knowing the origin to Your problem* - General approach when in trouble is as follows:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Yours Bengt W

Image Incomplete Message during burning process

HI All,
I have had this problem pop up a few times as of recent. I get an image incomplete during the burn process when running IDVD 6. It has happened on 2 different projects on 2 seperate occassions. I was eventually able to get it to work but am I missing something or doing something wrong?? Thanks for look
Joe

You may need to force quit iDVD (appleoptionesc).
If you do force quit, make sure to run apple's Disk Utility afterwards to repair permissions on your main HD. In fact, I would do it regardless ...might help resolve some issues here.
Applications>Utilities>DU

Certain psd images are saving darker as jpegs

I use Photoshop CS3.
Certain psd images are turning out darker after I save them as jpegs. The shadows are far more predominant and the images are significantly darkened. This only happens with photographs that I have edited over the past two or three days. All photographs that I have edited four days ago or more save exactly as they appear in photoshop. There is no darkening whatsoever. I can't figure out what is causing this recent batch of photographs to save differently.
Both batches are RGB 8 bits, Color Mode 3, with an ICC profile of sRGB IEC61966-2.1.
Thanks.

Is your display profiled and calibrated, and if so, what software/hardware did you do this with?
What version of Windows are you running?
It sounds as though your Windows Photo Viewer may not properly be using the document and monitor profiles to do color-management.
Windows Photo Viewer has been color-managed since at least as far back as XP SP3, but I'm wondering if your monitor profile just isn't being interpreted correctly. Perhaps it's in a format your OS software can't handle.
-Noel

Batch Psd image conversion into jpegs in pse 10 or 11?

I want to batch convert some .psd images into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another. Thanks!!

Unfortunately, you have posted to the Photoshopn (PsE's big-brother) General Discussions Forum. There is a very good, and active Ps Elements Forum, where your question will be answered. I will Move your thread to the Ps Elements Forum, and your link, plus any e-mail subscriptions will follow.
Good luck,
Hunt
[Moved to Photoshop Elements Forum]

Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

One thing to check is that your PSD is RGB/8 or /16, but not /32 (32 bits per channel)
If that is not the problem
Let's try this:
Close Adobe Photoshop if it is opened.
Find the following: (windows user can hit windows key + r, then in run cmd line type "%appdata%" to locate your "AppData\Roaming" directory)
\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Preferences CC Settings
Rename the "Adobe Preferences CC Settings" folder to "Adobe Preferences CC Settings_old" so that preferences settings can be recreated.
Reopen Photoshop CC and open a new or existing file to verify that your "save for web" option is back and not grayed out.

LR4 psd image can not be found

Have a dng image in my Catalog:
A
1. Edited it using PS CS6
2. Saved it as psd image
3. The psd image appeared in the Catalog, but with a question mark in the upper right corner - viz., it could not be found
4. The image also appeared in Windows Explorer
B
1. Saved it as a tif image
2. this image appeared in the Catalog without the question mark!
C
1. closed and reopened LR
2. closed and reopened Win 7
3. uninstalled downloaded and installed new copy of LR
4. All to no avail!! The psd image still shows in catalog, but can not be found!
I have other psd images in the catalog that LR can find!
Called Adobe Online Support. They could not help.
Any help would be appreciated.
Chuck

chandu04 wrote:
Hi,
I am new to crystal reports.
I am using
Crystal Reports XI
jdk1.5.0
JBoss4.0.4GA
MYSQL5.0
When i access a method in another class from implementation class, it gives error. all the jar files
are available as i know. calling and called classes are in the same package.
I give the error details bellow , please help me.
C:\Java\jboss-4.0.4.GA\server\default\deploy\AMS.ear\reports\raactualrpt>javac RaActualRptImpl.java
RaActualRptImpl.java:87: cannot find symbol
symbol : class RaActualRpt
location: class reports.raactualrpt.RaActualRptImpl
resultSet = HibernateUtility.getProjectedEntity(resultSet,(new RaActualRpt()).getColumns(),reports/raactualrpt/RaActualRpt);
You need to make sure that the RaActualRpt class is in the classpath either through the environment variable or as a javac option. Also make sure you import it if it is not in the same package as RaActualRptImpl

.MOV to .PSD image shift...HELP!!!!!!

I have a .MOV and a .PSD file of the same image, the .MOV is of the .PSD image animating into its place on the .PSD. However when the track (.MOV) jumps to the Layered Menu (.PSD). there is an image shift. How do I prep the files so that the uncompressed quicktime movie and the photoshop file will line up seamlessley?
Any help appreciated!
Bill

I don't know enough about how you applied the motion to tell you exactly why this happends, but I have clue:
If you are animating the motion in FCP in an uncompressed sequence, the frame size will actually be 720x486. When this gets encoded to mpeg, it gets cropped to 720x480, 4 lines top and 2 bottom, to keep the field order the same.
I start with a 720x486 file in photoshop, and then manually crop it 4 top and 2 bottom to prepare the version of the still file for the DVDSP menu.
I might also recommend simply extending your motion quicktime to include the still at the end. It should only add a minute of video to your disc. You can even set the menu in DVDSP to a stilll at the end, as opposed to looping.
Another thing that can effect positioning of photoshop layers in FCP or DVDSP is if there are any pixels on the layer outside the bounds of the canvas. A quick "select all-image:crop" will eliminate this.

Newbie: Change PSD image pulled from an existing website via DW (CS4)

I need to make a minor change to an image created in photoshop.
The image is from a website I took over from another designer and downloaded to Dreamweaver, and I successfully uploaded the image to Photoshop. However, since the image (in this case, the website header) is flattened, the only way I know to make the update I need is to create a "patch" for the part I need changed and try to match the font, color, and other elements.
Since I did not create the original file I do not have the layered version.
I have a number of sites to update with the same challenge. Is there an alternative to either creating the patch or having to reconstruct the PSD image from scratch?
Thanks in advance for any advice -
KE

I would rebuild the file.

Image incomplete error message

I produce a 2 hour DVD every week for stock car racing at Charlotte County Motorsports Park in Florida. I use iMovie & iDVD. This week's DVD is #38. Last year I did 29 2 hour DVDs. No problems in 67 DVDs at all, till now. In the Creating your DVD pane, during the burn process, after it burns the menus, it tells me "image incomplete". No warnings in the Map window, or any problems I can locate in iMovie. It will not read or play in a set-top DVD player, but will play in the Mac. I see all the chapter menus with audio, but, it will not play the chapters or the whole movie.
Please help! I need this DVD for sale Fri night, 11/9/07.
Thanx

Have you recently switched medias by any chance?
If it's the very same media that's always worked perfectly in the past, then please drag and drop the plist for iDvd to the trash and Restart your mac.
com.apple.iDvd.plist
Remember to Repair Permission thereafter.
Also please include as much info on your mac as possible including available HD space on the startup volume (assuming you have not added any ext. devices recently and if so please disconnect them while troubleshooting). Btw use Verbatim / Maxell DVD-R while we troubleshoot this issue. Thereafter you can use whatever you please.
Are you able to make a disc image to the desktop (from the file menu in iDvd)? if so, use apple's DVD Player app to test for proper playback. This will help narrow down the issue to either the media or your mac.
Good luck.

Batch converting psd images into jpegs in pse 10 or 11?

I want to batch convert the above. I know i can convert one image at a time. If not can one recommend a batch conversion program which is safe to use and free from viri and malaware. Thanks!!

And when you are in the process multiple files menu what do you select from their to do the batch processing of the psd images to the jpeg images. I need a step by step here. Thanks!!

.psd images incomplete

Similar Messages

Maybe you are looking for