Psd insert blank: epic fail

Please help me. Please. The one thing I need Photoshop Touch to do is insert a logo psd for a job into other projects.  I need the logo to go on other images, small shelf signs, simple stuff. I can't use the logo as a jpg because the shape then has a white box around it that looks like a kindergartener colored it in when scribbled away. I have the logo psd in creative cloud after jumping through many hoops to find out what this app will and will not use. Insert: photo layer allows me to check the logo file in CC and download. The resulting layer, though, is completely blank. I have tried six ways from Sunday and this is my last resort because it appears this tool will not do the very thing I bought it to do. Please help, I am on a deadline and have spent hours getting nowhere.

Thank you so much for keeping in touch to let me know it  matters. 
I jumped through every hoop to get the files into creative cloud.  They will.not.open. in PS Touch. They get a check mark, they allow clicking "add," then the layer is 100% blank from every approach.  Just wanted to be clear the Cloud did not make a difference whatsoever.
Unfortunately this means the designer we brought in is totally taking over my  project and changing all the logo colors to begin with.  So not looking good for me to be able to make money to buy a proper laptop in a year... something to think about.
Thanks again

Similar Messages

  • Psd opens blank in PS Touch

    Please help. None of the psd logo files from the designer of an important project will open in PS Touch, at all, from any angle. They show up blank. Major problem, potential epic fail. Please advise, I'm on a deadline.

    You can import PSD files into Photoshop Touch but the PSD file will be flattened. (The original, of course, will remain untouched; PS Touch just copies it upon import.) I imagine this was done as a failsafe measure since PS Touch has no support for masks or adjustment layers (not to mention that PS Touch only has support for about 12 layers).

  • Insert blank disc...when one is already in?

    After sucessfully burning a disc. Then attempting to burn another iTunes says to "insert a blank disc". Ejecting the blank disc I have already put in the PC. Then inserting another fresh disc it says "checking media", then nothing happens. I click burn disc againg and it ejects the disc saying again "insert blank disc". AAARRG! Please help! The only solution I have found is to reboot the PC....every time!!
    Thanks for any help,
    Kelly

    i made a burn folder that has files lower then the
    700MB max, and then I insert a blank CD-R and then I
    click the burn button in the folder and it says that
    I need to insert a blank disc, when one is already in
    there. I've tried my whole spindle of CDs, a
    different kind of brand of CD, and a CD-RW. I had
    already burned 2 before, but I don't understand why
    it isn't working anymore. Can anyone help?
    Try clicking the burn button first then insert the CD when prompted. OSX should then verify the CD and if it's good start writing your data. I've had the same problem with itunes and found it ofter fails if I put the CD in first so now I always wait till prompted to insert the CD. When I wait till prompted it always works.
    Macbook, 2.0 duo, black   Mac OS X (10.4.7)   80 gb hd, 2 gb ram, 5g ipod, 2g ipod

  • Insert  Blank row  After every Row  in alv report

    How to insert blank  row After every row  in Alv report

    what do you mean by a 'blank row'? ALV displays tabular data with 'any' number of columns. Now if you actually want a blank row (no columns at all, just a row), then that is just not possible. If I'm not mistaken, this question was posted before, so try to do a search on SCN. See what is says.

  • My iTunes account was disabled:  epic fail Apple!

    So, here's my story.  Last night, I was suddenly aware that I couldn't update apps on my iPhone (4S, up to date), or load new ones.  Tried everything, nothing helped.  iPad seemed fine.  Restored, restarted, resetting as new phone, nothing worked.  I went to my local genius bar and spend THREE HOURS with them, where they tried everything as well, resotring, resetting, even swapping the phone, nothing helped.  They suggested I contact apple for more help, I completely stumped the entire genius team at this store. Calling apple store support on my way home in a huff, the nice woman on the other line suggested that my account might be disabled.  So, upon returning home, I looked up "disabled itunes account" and noticed that to fix this, all one needed to do is change your itunes password.  When I did that, everything was fine again.  Apps loaded fine, existing apps updated fine as well.
    I consider this an epic fail on Apple's part.  Mind you, I love the iPhone, have had every model, and would never get another phone.  Nevertheless, why was my account disabled?  Why is there no phone number to call itunes support?  I have to email and wait for them to call back?  Why wasn't I sent a message saying that my account was disabled becuase of a potential security breach?  My account is in good standing, I barely purchase anything to be honest.  The odd small app or two, but that's it.  All was valid and in good standing.  Why would the geniuses not think to say "maybe it's your itunes account, let's change the password and see what happened."  I consider this a collasal failure, making me waste an entire evening, only for it to be a quick fix.
    Has anyone else experienced this? 
    Thanks for the feedback!
    D

    why was my account disabled?
    Usually it is because of multiple incorrect password entry attempts. Since resetting the password fixed the problem, this would seem to be likely. I can't say with certainty, though.
    Why is there no phone number to call itunes support?
    Because Apple does not provide telephone support for the iTunes Store,
    Why wasn't I sent a message saying that my account was disabled becuase of a potential security breach?
    No idea. E-mails are I believe usual in at least some such cases, but whether one would be generated in this specific instance (and perhaps was blocked by a spam filter) I can't say.
    Why would the geniuses not think to say "maybe it's your itunes account, let's change the password and see what happened."
    Again, no firm idea, but the Geniuses aren't expected to provide support for the iTunes Store, so it probably hasn't arisen in exactly that way before and hence just didn't occur to them in absence of any evidence or notification that the account was disabled.
    You can comment to Apple in the matter via their feedback page, if you wish:
    http://www.apple.com/feedback/itunesapp.html
    Regards.

  • Without Warning, OSX 10.6.8 emailer has epic fail

    Even my MacGuru of some 17years could not figure what the *wild weasel* malfunction was coming from. He's the one who steered me to use the designated iCloud account page. Suddenly, for no apparent reason, my 10.6.8 emailer *epically failed* to receive email as shown in the InBox. Contacted my MacGuru , whom is also my webmaster who has set up my emailer in past who advised to do a Connection Doctor check. Did one 3X and all a connections green lighted and sent current screenshots as proof of my findings to him along with a screenshot of the InBox of my OSX emailer showing *zero* outside emails since 6:30 AM, July 31,2014. That InBox remains dysfinctional. The strange thing is it does register email I send myself to myself as well as some., nowhere near all , ( as shown by my iCloud account webpage InBox , emails of my webmaster. It was as if fully half of our morning's email dialogue never happened according to my OSX 10.6.8 email InBox. He even informed me everything looks fine from his remote monitoring to which I had to reply, obviously the remote map is clearly *not* the actual territory. I suggested a possible *corrupted* emailer which he responded that it can't happen because all signs show everything is go. So what do I do with that diagnosis when my OSX 10.6.8 *still* is NOT  functioning as it normally should forcing me to depend upon the iCloud.com account page for any reliable receiving of email. I can *send* form my on iMac emailer, but reception is totally epic fail. Hence the iCloud.com account webpage is the only reliable alternative.
    Any ideas out there? Should I just back-up archive all of my created MailBoxes and trash this piece of dysfunctional emailer garbage and either do a clean install of just the emailer or would an epic fail like this require a clean install of all of OSX 10.6.8? I amForced to staywith OSX 10.6.8 because this is Wacom's he cut-off support version for my the drivers for my Wacom 12X 18 Wacom Intuos as I can not uyet afford the $700 upgrade to an IntuosIII . Measnwhile this iCloud account page is *most* inefficient , but I am left *no* other choice that I've been made aware of . That's why, out of desperation to understand what the OSX emailer app dysfunction is , I came to this open forum.

    bobc47 wrote:
    I've done the SMC and PRAM reset with no results.
    The Disk verify reported no problems. The permissions repair found and repaired permission problems; I've done this both from inside OSX and using the install disk.
    Bob
    Maybe a cache got corrupted.  Reboot in safe mode then reboot again.
    Possibly run OnyX to do even more aggressive cleanups.

  • Report Painter insert blank line after report header

    Hi Expert,
    I have a problem to insert a blank line (a spacing) after the report header of my customized report painter.
    For example, in standard cost center report, S_ALR_87013611, there is a small box listed information like cost center/group ... and reporting period.
    Right after reporting period, the report header box ends, and there is a space line between it and the cost element data ...
    For my customized report painter, I cannot make this space line.
    I tried edit > row > insert blank line ... but not successful ... kindly advise.
    Thanks and regards,
    -CK

    Hi
    In KKO2 go to output tab, here under layout, tick header and then press pencil symbol and in the editor you write your header. I think this will give you desired result.
    Regards
    Rajneesh Saxena

  • I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
    Thanks again

  • Captivate 7 -- Insert Blank Slide bug?

    Hi,
    I'm creating a tutorial in Captivate 7 (Win 8.1) using screen shots (taken from another computer using Windows 8.1 Update). I would like the last slide to be a blank screen that I will then mock up. I use "Insert > Blank Slide" to do so. The slide, in the filmstrip, appears to be blank. However, when I click on the slide, it shows a screen shot from a previous slide. I can't get rid of it. The image file doesn't appear in the Timeline nor, as already stated, in the Filmstrip.
    What can I do? I want to add a SmartShape to cover the screen but I want the alpha toned down to 80%. When I do that, I can see the background image that shouldn't be there in the first place. Help!

    Check if the timing of the image on the previous slide is set to Rest of the Project.
    Sreekanth

  • Sql insert statement will fail if the data value has empty line

    Hi,
    I notice if the insert statement in my .sql file contains data that has new line (enter key), the insert will fail.
    For example:
    insert into mytable (message)
    values ('this is the first line
    this is the second line that will cause insert statement to fail
    so as this third line');
    commit;
    How to overcome this?
    Please advise.
    Thank you.
    Message was edited by:
    bchurn
    Message was edited by:
    bchurn

    It did not return me any error. What is the error you are receiving ??
    SQL> create table mytable (message varchar2(500));
    Table created.
    SQL> insert into mytable (message)
      2  values ('this is the first line
      3  this is the second line that will cause insert statement to fail
      4  so as this third line');
    1 row created.
    SQL> @c:\test.txt
    1 row created.contents of c:\test.txt
    <<
    insert into mytable (message)
    values ('this is the first line
    this is the second line that will cause insert statement to fail
    so as this third line');
    >>

  • I cant burn a cd it gives me error code 2131 or it keeps saying insert blank cd which I do

    I cant burn a cd from Itunes playlist it says error 2131 or insert blank cd which I keep doing.

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • Inserting blank values and retrieving blank values

    I really want to Insert blank values into Oracle database,and also want to retrieve blank values from table.
    When I try to insert blank values ,Its inserting null values.
    I don't want to insert null for blank.
    Please provide me solution for this.
    Thank you

    user631179, logically if you have a descrition or other printable
    character column where the value is blanks you do not have a value.
    The data item is logically unknown or non-existent, hence NULL.
    You can assign blanks (spaces) for NULL in the querying program
    like SQLPlus does on display. The Pro*C and other language tools
    provides null indicator bytes for this purpose.
    UT1 > l
      1  select fld1, fld2, rpad(nvl(fld4,' '),10,' '), length( rpad(nvl(fld4,' '),10,' '))
      2* from marktest
    UT1 > /
    FLD1             FLD2 RPAD(NVL(F LENGTH(RPAD(NVL(FLD4,''),10,''))
    one                 1                                          10
    TWO                 2 USER51                                   10
                        4 USER51                                   10HTH -- Mark D Powell --
    Message was edited by: Mark to try to keep the test from requiring scrolling
    mpowel01

  • How to insert blank lines in the ALV output.

    Hi Friends,
    Could any body help me out How to insert blank lines in the ALV output.?? Any Code pls...
    Thank you,
    Vikram.C

    hi vikram
    do like this
    In the fieldcatalog table all the fields should be in editable mode
    ie lw_fcat-edit = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    i_callback_pf_status_set = 'SET_PF_STATUS'
    i_callback_user_command = 'USER_COMMAND'
    is_layout = lv_layout
    it_fieldcat = lt_fcat[]
    i_save = 'A'
    is_variant = lv_variant
    TABLES
    t_outtab = lt_license[]
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " display_data
    *& Form user_command
    FORM user_command USING r_ucomm TYPE sy-ucomm
    rs_selfield TYPE slis_selfield.
    CASE r_ucomm.
    WHEN 'ADD'. "
    data: lv_ind type i.
    data: lv_line type i.
    describe table lt_license lines lv_line.
    loop at lt_license into lw_license.
    lv_ind = sy-tabix.
    if lv_ind = lv_line.
    append initial line to lt_license.
    endif.
    endloop.
    ENDCASE.
    ENDFORM. "user_command
    reward points if useful
    Rohan

  • Nokia Social connection bug / problem (Epic Fail)

    Hi there,
    When you open an application which requires internet connection, the phone checks the saved access points according to their priorities to see if there is an available access point among them and when the phone finds an available access point, it tries to establish a connection. (Normally, WLAN connections come first prior to gsm operator connection (3G or EDGE) in order to save the cost.) This is OK so far.
    Now here is the abnormal behavior;  when you open the Social application, the phone does not check the saved access points whether they are available or not, it tries to establish the connection right away!! So, if you are somewhere out on the street and have for example 10 or more WLANs saved in your access list (I have 8 in my case), Social app tries to connect each and every one of them without checking whether they are available or not and gives connection fail message after it tries every WLAN access point then finally it reaches the end of the access point list and finally establishes the operator connection. This takes a lot of time and causes useless battery consumption. Most of the time it doesn't connect at all. I have to open any webpage to establish the connection first then I open Social app. Yet, to work around this problem, there is no setting to tell Social app to use a specific access point.
    Is there any solution to this "another epic fail"? I'd appreciate if someone help me out on this.
    Thank you,
    Social Version 1.3.237
    Anna 25.007

    for n8 social network diesnt work

  • Inserting Blank/Silence Into Project

    Hello- Does anyone know how to insert blank space/silence into a project. Say at the beginning or middle of the project. When I select all and move, the volume changes I made don't move with it.
    Thanks!

    mr.bill wrote:
    the volume changes I made don't move with it.
    use the Lock Automation Curves menuItem

Maybe you are looking for