PSD shows small view in bridge but doesn`t open in photoshop..help?

Hydro shuut off and PC too and I can see just the small view in bridge and not full screen but it won`t open in photoshop cs3. Any help would be great. I tried illurstator, and infaview..nothing helped so far. File is 183 mb

I'm sorry to hear of your loss of data.
I'm also sorry to have to say that people can almost never recover damaged PSD files. This is one reason Photoshop CS6 is coming out with an Auto Save function.
Did you save your master file in several different locations, or do you have a backup? Make sure you protect any backed-up files ASAP, before they're overwritten by the corrupted one.
What do you see when you right-click the PSD file, and choose Previous Versions (assuming you have Vista or Win7)?
Under some conditions there's a possibility of recovering a flattened version from a truncated PSD file, depending on how you have your settings (maximize compatibility causes a flattened preview to be saved at the front of the file).
-Noel

Similar Messages

IMovie shows up in Mission Control, but doesn't open when clicked.

Can't open iMovie. iMovie shows up in Mission Control, but doesn't open when clicked. It just disappears up in the top left corner of the screen. The controls on the top of the screen (like; iMovie, File, Edit, View, Text, Share, etc) are al there, and they seem to work, but the window just won't show up.
It happened after installing Mountain Lion on my Macbook Pro.
Any ideas?

Disable screen saver. Restart.

Page designer show small view when using page template and cannot be run

Dear Experts,
I need to make some page templates.
I have build 2 simple page templates, let say template0 & template1 which template1 using template0.
It show no any problem until I close my Jdeveloper & reopen it.
When I reopen template1, it show so small in designer (Jdeveloper window).
Is there any wrong?
I have build another template, just 1 template.
When I used it at the first time, no any strange behavior occur.
After ... (I don't exactly when), it give me the same view in my designer.
Then I force to use my first tempate (template1 which used template0 inside), I cannot run my application at all.
After wait several minutes, I found error log in my log messages.
*#### Server Instance DefaultServer could not be started: Server Instance was terminated.*
Above the message, I found another error messages:
*Jun 7, 2009 5:40:19 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: null/tag:xmlContent/id:dte_160d74a
org.xml.sax.SAXParseException: <Line 69, Column 7>: XML-20100: (Fatal Error) Expected 'EOF'.
* at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)*
Is there anyone that can help me to find out why this error occured?
Should I raise this problem to metalink or just can post it in this forum?
Many thanks for your supporting...
N.B: Below I attach my template0 (AHM000.jspx) and template1 (AHM001.jspx)
Best regards,
Dominic Chandra
AHM000.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM000"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:panelSplitter orientation="vertical" splitterPosition="60">
<f:facet name="first">
<af:decorativeBox theme="dark" topHeight="0px">
<f:facet name="center">
<af:panelHeader text="#{attrs.pageTitle}">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend">
<af:panelGroupLayout>
<af:outputText value="#{attrs.pageName}"/>
<af:outputText value="#{sessionScope.userState.userName}"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
<f:facet name="info">
<af:statusIndicator/>
</f:facet>
</af:panelHeader>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelSplitter orientation="vertical" positionedFromEnd="true"
splitterPosition="20">
<f:facet name="first">
<af:decorativeBox theme="light" topHeight="0px">
<f:facet name="center">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout inlineStyle="text-align:right;">
<af:outputText value="#{ahmwebtemplateBundleAHM000.VERSION} #{attrs.appVersion}"
inlineStyle="color:Navy;"/>
<af:outputText value="© 2009 PT Astra Honda Motor"
inlineStyle="color:Navy; font-weight:bold;"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM000</display-name>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
</component>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>
AHM001.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM001"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:pageTemplate viewId="/template/AHM000.jspx">
<f:facet name="mainArea">
<af:panelSplitter splitterPosition="#{attrs.searchAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="searchArea"/>
</f:facet>
<f:facet name="second">
<af:panelSplitter positionedFromEnd="true"
splitterPosition="#{attrs.infoAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="second">
<af:facetRef facetName="infoArea"/>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:attribute name="pageTitle"
value="#{attrs.pageTitle}"/>
<f:attribute name="pageName" value="#{attrs.pageName}"/>
<f:attribute name="appVersion" value="#{attrs.appVersion}"/>
</af:pageTemplate>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM001</display-name>
<facet>
<description>Search Area</description>
<facet-name>searchArea</facet-name>
</facet>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<facet>
<description>Info Area</description>
<facet-name>infoArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
<attribute>
<attribute-name>
searchAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
<attribute>
<attribute-name>
infoAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
</component>
<af:decorativeBox>
<f:facet name="center"/>
<f:facet name="top"/>
</af:decorativeBox>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>

Hi...
Thanks for asking....
As I put in my post before, I include template0 in my template1, as seen in template1 (AHM001):
<af:pageTemplateDef var="attrs">
*<af:pageTemplate viewId="/template/AHM000.jspx">*
I use AHM000 inside AHM001. I use this approach to build many template based on one basic design.
Actually, I don't think the problem is in page template usage because as I submitted paralel to Metalink, I've already not called template0 in template1 but I copy template0's contents to template1.
Unfortunately, page designer show small view and below error messages still occured.
*Jun 7, 2009 10:25:20 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: /AhmTestTemplate-ViewController1-context-root/template/AHM001.jspx/tag:xmlContent/id:null
org.xml.sax.SAXParseException: <Line 115, Column 51>: XML-20100: (Fatal Error) Expected 'EOF'.
Fortunately my application can be run already altough the error message still logged.
Many thanks,
Dominic C.

My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?

Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards

SSI shows up correctly in DW but doesn't show up in browser.

I am trying to update the company website here at work using Dreamweaver 4 and the copyright information at the bottom of the page is in an ssi file. The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?

The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?
SSIs are parsed by the server. You're probably not doing anything wrong, you simply need to upload the files to your remote server and look at the pages on-line.
If you want to preview local files, you'll need to install a local testing server on your machine. Get one of the following servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

My iphone shows a red circle alert but doesn't allow me to access it. How do I get around this?

My iphone shows a red circle alert but doesn't allow me to access it. How do I get around this?

Red circle alert to what? Maybe post a screen shot of your issue.

Why don't I receive iMessages on my iPad when sent to my iPhone? When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

Why don't I receive iMessages on my iPad when sent to my iPhone? When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

Ok. So I figured out that I can add the email address to my iPhone 4s to receive the iMessages sent/received from my iPad. How do I get the messages on my iPad that were sent to my iPhone? Is it possible?

HT1222 What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

. . . sparse bundle could not be accessed (error -1)

I set up a new account, found the song, it ask view in itune but doesn't give me an option to buy..help.. using hp pc

pls help me, I can't find where I can buy a song..Trying to add to music library on HP PC..Itunes only shows me view in Itunes but no purchase option

See the How To Sections Here
http://www.apple.com/support/ipod/earlier/
And Here
http://www.apple.com/support/ipodclassic/

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

The Side Switch is to mute your ringers, and most of the application's sound. To totally mute the sound, you must use the rocker to mute it.

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

Just installed Final Cut Express 4 but doesn't open

Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

Al's suggestion should solve the problem.
However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
For a permanent cure edit the info.plist like this:-
1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.

I have lost my Safari url bar ,tried view/customise toolbar but when box opens there is no address bar to drag back can anyone help please

I noticed a couple of days ago that my url bar on my imac was no longer there,I am new to the apple community and I am not sure how to progress with my qustion. I have tried selecting :- view / customise toolbar but the dropdown box which has various options to drag and drop does not show the address bar I am stuck can you help

Thanks.... I too had this problem and didn't have a clue why it disappeared at times and how it reappeared as well. Got another bird with the same stone
     Re: I have lost my Safari url bar ,tried view/customise toolbar but when box opens there is no address bar to drag back can anyone      help please
     Aug 15, 2012 10:09 PM (in response to jame5allen)
     Go to: Safari>View Menu>Select 'Show Toolbar'.
BCV

Double clicking on a file launches the app but doesn't open the file anymore. Why?

Double clicking on a file launches the app but doesn't open the file anymore. Why?

I would post in the Illustrator forum here http://forums.adobe.com/community/illustrator or the Dreamweaver forum here http://forums.adobe.com/community/dreamweaver. One of these product forums will be able to help.

Database is mounted automaticaly, but doesn't open

Hello everybody! Please help!!!
I have Oracle 8.1 installed on Win2000. When I restart the PC, the database is mounted automaticaly, but doesn't open. I have to open it manually every time I restart the PC. How can I solve this problem?

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that doesn't help:
Post the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here.
Regards
TD

PSD shows small view in bridge but doesn`t open in photoshop..help?

Similar Messages

Maybe you are looking for