PSE 10 Photomerge on Win 8.1

Moved my licence for PSE 10 from old computer (Win 7) to new computer (Win 8.1). Have re-installed twice to confirm installation is correct. Photomerge does not work - it raises a Windows error message that the program has crashed. I wonder whether it is a known issue - official OS grid on Adobe site says that PSE 10 has not been extensively tested on Win 8.1, but there are no known issues. Is this a previously unknown issue? and is there a solution to make it work properly?

bump

Similar Messages

PSE 11 on WIN 8.1

Ran pse 11 on WIN 7. Upgraded to 8.1. Cannot get downloads to open on 8.1. What is the trick or secret code?

what downloads?

Tried PSE 8, unhappy, problems w/ PSE 5 in Win 7 Virtual

This post is frankly my last hope with Adobe. I loved PSE 5 in Win XP. New computer, Win 7 Pro, backed up catalog in old computer, downloaded trial of PSE 8, unable to recover catalog, just a mass of broken links. Took backup to another computer with PSE 5, recovered catalog and all links intact. Downloaded PSE 8 on that computer, converted files to PSE 8, backed up in 8, brought back to "new" computer, got catalog and tags, but all links broken. All attempts to fix broken links failed. I am completely dissatisfied with 8, and will not buy. It froze up several times and is frustratingly slow. Just seems not to be a good product.
Since I liked 5, set up virtual pc in Win 7, installed 5 and still cannot get it to recover from the backup. Backup is good because it worked on the "other" computer.
Give up on Elements? Do I gain anything going to CS5? Sony is looking very good right now. Any ideas?

Good suggestion. You are absolutely right that the Editor functions are great. I am just getting started with GIMP, and if that doesn't work out I will try just using the editor. I have also learned that the PSE Organizer made me lazy, and now with Picasa I will have to pay a great deal more attention to how I organize folders of images. In the end, that is a good thing because software comes and software goes, but I want to keep the images; so not relying on the software so much will make it easier to adapt in the future. The best lessons are learned the hard way. Thanks to all for the comments.
While I'm sure no one at Adobe give a hoot what I think, I need to say it anyway. As a former fan, I am totally soured on Adobe products and will now seek out and use open source substitutes for Dreamweaver and Acrobat to the extent possible. Did the bean counters take control?

Nikon D300 RAW and PSE 5.0 (Win)

I have just started to process my Nikon D300 RAW images in my ACR / PSE 5.0 (Win) installation. The RAW conversion works OK but when I want to remove the actual RAW files from my computer to store elsewhere, the computer will not let me move or delete them because "they are being used by another program or person."
I have also noticed other strange goings on with these RAW files sometimes causing PSE to freeze.
A quick check with the Process Explorer diagnostic tool from Microsoft indicates that something called Photoshop Elements File Agent.exe is still running in the background. Is this a problem of the RAW files themselves or PSE? Has any other user met this? I have backed up "My Catalog", restarted my computer and uninstalled / reinstalled my PSE 5.0 to no avail.
Any help gratefully received!

Hi dj_paige
1. Sorry but Windows XP (SP3).
2. My current RAW workflow involves deleting the
NEF RAW files from the PSE Organiser after
conversion, copying / backing up the NEF files to
an external HDD (which works OK) and then moving
them (via standard Windows Explorer
drag-and-drop) from the "Download" folder to an
"Archive" folder on my computer internal hard
drive. I got the same error message when I tried
to delete them from the "Download" folder. My
son, who works in computers, put me onto the
Microsoft "Process Explorer" utility, to try and
find which program was still using the files.
3. I have had no problems with this workflow with
my previous Nikon D70. My suspicions about the
D300 RAW files arose when the problem happened
with the first one I tried to move / delete.
4. The other "strange goings on" relate to trying
to reopen one of the affected D300 NEF RAW files
back into PSE Editor. My PSE5 installation just
stopped. Today, after having reinstalled my PSE
software, when trying to import one of the
affected D300 NEF RAW files back into PSE
Organiser, I got an error message relating to
"Memory". As this is all somewhat vague, I will
try to recreate and note the error messages received.
I look forward to any progress on this matter.
Kind Regards
Adrian Law

Re-installing PSE 10 on Win 7 pro 64

I'm having a issue involving re-installing PSE/PE10 onto my new Win 7 pro 64 home build.
It started with-
I had an issue right in the middle of installing software onto this new machine.
I have multiple Hard Drives installed and during a recovery from being hit with some bugs (malware/virus) during all this installation I thought it best to unplug some of those drives to minimize potential damage.
I had already installed PSE/PE 10 onto those drives and when I finally got back up and running the links to these installed programs no longer worked. Trying to re-define the links proved too much and so I thought a complete re-install of both programs should do it.
I un-installed both programs
Un-install, cleaned registry, found more folders (reading forums here) deleted those, cleaned registry, rebooted thru several of these processes,..and did manage to re-install PE 10, but PSE 10 is giving me fits and I can't figure out what else to do.
I go to re-install PSE 10 and the only choice I get is to REMOVE the s/w from the pc (even tho it's already uninstalled). Okay, I'll do that and THEN proceed but- after offering to deactivate my software on this pc (okay I can do that) the only option it then gives me is to delete, fine, but when I select that option it then takes me to a window that informs me that the disk doesn't have the room available and even tho other disks are avail to click on, doing so doesn't allow any other selections to be made. The TARGET area (even tho it is for uninstall) is the install disk drive and I can't make another selection. So it ultimately does nothing!
I managed to get PE 10 back onto the drive, what in the world remnants are staying behind to give Win 7 the impression that I still have the program installed and not allowing me to do just that- re-install it??
Could really use some assistance on doing this before I wipe the whole HD as a last resort- ugh!
ps- uninstalled Air, Organizer and any/all folders I could find related to anything Adobe thinking it was interferring with this

I managed to RegEdit those areas but must have gotten heavy heanded in that, after cleaning all instances of Adobe out of the Registry I get another problem. I just went to try and install PSE 10 after doing as much cleaning as I know how;
checking the registry as you suggested
running a registry tool to check for missing links etc
rebooting after each pass to clean the drive
When I went to install it tells me an error on the windows installer- "The configuration data for this product is corrupt. Contact your suppport"
I must have taken too much out of the Registry. Is there a method to restore? Would that fix the issue?
Thanks for the assistance
ps- FYI, upon trying to run the PE10 installer it seems as if that was going to work. I cancelled out of it until I fix the PSE 10 issue. But it did get further than the PSE installer and no error messages.

PSE 8 in Win 7 - Slide Show Editor does not display preview

I have a student who is not able to see the preview either in the monitor window or full screen in the Slide Show Editor. The individual slides are black. However, when the slide show is rendered it is fine. She also has PSE 7, and it works fine in this regards. Any ideas?
TIA
Don S.

Cowboy,
We will definitely check to make sure the color is set to 32-bit. What I meant to say in my earlier post was that in the various computers I bought over the years, I have never seen any with their "default" setting at less than 32-bit - at least I don't recall ever having to put them into the 32-bit mode. Also, I'm pretty sure my student did not go in and change the setting. But we are going to check, just to make sure.
Thanks again for your reply.
Don S.

Compatibility PSE v2 and Win 7?

I plan to buy a new computer with Win 7. Will my trusted Photoshop Elements version 2 continue to work?

Sorry, I wasn't precise in my terminology (necessary when dealing with Microsoft!).
Windows 7 provides two different facilities for compatibility:
1. Windows XP Mode runs an XP virtual machine inside Windows 7:
http://www.microsoft.com/windows/windows-7/features/windows-xp-mode.aspx
It requires WIndows 7 Pro or Ultimate.
2. As with Vista, you can set compatibility options for an individual program by right-clicking its icon or Start menu item, selecting Properties, and then the Compatibility tab. This option comes with every version of Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows

Catalog in PSE 7.0 Win XP Pro?

Had a system crash . .   major bummer !
However, I did have a backup image of the hard drive, so I think I'm okay.      I do KNOW I have all the digitals assets (PSDs JPGs, etc). However, I cannot seem to locate the catalog I created in Photoshop Elements 7.
Would someone please point me to the location?   I reinstalled PSE 7 on a reformatted drive, and need to point it to the catalog.
Many thanks !

You can search for the .pse7db file in your system. By default the location of catalog is c:\documents and settings\All Users\Application data\Adobe\Elements Organizer\Catalogs.

New computer need to re-install PSE-12 on win 8

I have a new all-in-one and need to re-install PSE 12 how do I download I did not see a download button to do this .
I have the product key anyone know how to do it ?

Hi,
Download the trial version and supply your serial number during installation to make it a full version.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
Good luck
Brian

Error 2349 and 2350 installing PSE v10 on Win 7 machine ?

Please can anyone help, I have tried numerous attempts, followed pre-installations steps but with the same result of a failed install.
Thanks
James

James0073 it looks like you either have a problem with your download or the Microsoft Windows Installer component of your operating system. Please re-download the software again. If the problem continues then I would advise you to complete solution 6 in Error 1311, 1335, or 2350 "Source file not found...data1.cab" when installing Adobe products | Windows.

PSE 9 on Win 8.1: Editor stopped working but organizer works.

Editor stopped working but organizer works. Un install and re install didn't solve problem

You don't give us much to go on, like what operating system, when the editor fails, etc. More information would help,
but try quitting the editor, then restarting while holding down ctrl +alt+shift/command+option+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do.

PSE 7 on Win 7?

Will I be able to load PSE7 on a new pc running Windows 7

PSE7 is known to run on Windows 7.
Also see back-up & restore:
http://kb2.adobe.com/cps/402/kb402894.html

EXIF Daten löschen bzw. editieren in PSE 4.0 (WIN)

Hat jemand eine Idee, einen Tip, wie ich denn nun Exif-Daten löschen und/oder editieren kann?
Über >Datei >Dateiinformationen komme ich einfach nicht weiter. Ich möchte EXIF Daten ganz selektiv bearbeiten können oder aber auch vollständig löschen können.
P.S. Mir ist schon klar, daß ich das über >Für Web speichern machen könnte. Dadurch werden alle Daten gelöscht. DAS will ich aber u.U. auch nicht unbedingt.
Es könnte ja auch mal sein, daß ich nur ganz bestimmte Exifdaten für das Web freigeben möchte.
Und mit diesen XMP-Files komme ich irgendwie so ganz und gar nicht zurecht.
Also - wie habe ich die "totale Kontrolle" über die Exifdaten???
Hat da jemand "rein zufällig" eine griffige "Schritt für Schritt Anleitung" parat? Wäre ja klasse! Und vielen Dank schon mal!

Hallo
Ich bin hier ganz zufällig gelandet und denke, ich habe einen Tip für das editieren und bearbeiten von IPTC Tags.
Kürzlich bin ich auf den Bildbetrachter XnView gestoßen.
Download hier:http://pagesperso-orange.fr/pierre.g/xnview/de_downloadgfl.html
Unter Bearbeiten - Metadaten kann man "IPTC-Daten bearbeiten" auswählen und dann alles eingeben, was man möchte.
Dazu stehen unter Reitern die verschiedenen IPTC Kategorien bereit. Vor dem schließen des Menüs nicht vergessen unten links auf schreiben klicken und ann stehen die soeben erstellten Daten in den IPTC Tags bereit. Habe es danachauch mal mit
Photoshop überprüftt. Die Daten sind alle vorhanden. XnView kann auch selektiv Metadaten löschen. Das ist ja auch manchmal interessant. Was ich noch erkunden muss, ist die Möglichkeit eine Stapelverarbeitung. Vielleicht hilft dieser Tip weiter?

PSE 10 Photomerge pano error ... AGAIN!

Hi folks
Unhappy with Adobe PSE photomerge error ... again!
Two years ago I got the bottom error message when trying to make panos on PSE 8 on an older XP computer. Last year, I got a new Dell (i7 12 GB RAM) and got the same thing when I re-installed PSE 8. I recently purchased PSE 10 and still get the same message! (The top one.)
This error occurs when PSE has been used for assorted tasks before attempting a photomerge. The ONLY fix is to close PSE 10 and start it up again...same with PSE 8. That 'fix" is usually only good for one photomerge and is frustrating of working on several panos. Adobe knew about this as it had been reported before at least two years ago with PSE 8.
Is there a proper fix for this? Two PSE version on two computers. I don't think it is my electrodynamic personality causing the problem. ☺
Thank you!
Clive
This is the error message in PSE 10 on my Dell Studio XPS i7 12 GB RAM Win 7
This is the error on my old HP running XP...PSE 8.

bump

PSE 11/Win 7: Can I create an image of the front of our house all in brick?

PSE 11 on Win 7.
We have about two feet of brick at the bottom of our garage.
We are thinking of getting the whole front bricked with that same brick.
Is there a way I can create an image of our house showing that change?
I was looking at Fill Layer. There is some Pattern things available there.
But perhaps there is a better way to approach this.
Thanks for any thoughts.

Perhaps the photos app is too basic. I can’t confirm as I have an Android tablet. If you buy a $5 app, iPhoto for iOS5 you also get lots off cool tools and can create journals which make instant web pages. You can share with friends and family simply by using the copy link button and mailing them the URL.
Adobe also has a great Photoshop Touch app which you can sync with tablets via the Adobe Creative Cloud. Unfortunately the new PSDX files with layers can only be worked on subsequently in CS5 and CS6 as there is presently no plug-in for Elements. But the tools make it a great stand alone app if you want to do editing on the iPad.
There’s also the Snapseed app from Nik Software and Adobes consumer app Photoshop Express - so it’s a fast changing environment (Apple will soon launch iOS6) with hardware limitations. Not to be rushed into.
There is a hack/workaround if you have the CCK. You can use a USB flash drive & the camera connection kit to get files directly on to your iPad if you want to avoid the hassle of using iTunes or the cloud.
You first plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your video/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., IMG_1234.jpg; 12345678.jpg; MVI_1234.mov; my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
You will probably see a message like unsupported USB device but you can ignore it and import your photos.
Gotcha
The videos will show up in the photos section on the iPad but a great trick is to just play a movie from the connected flash drive rather than taking up space copying a large file to your iPad.

PSE 10 Photomerge on Win 8.1

Similar Messages

Maybe you are looking for