(PSE 11)After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  Please help.

After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  I am using Adobe Photoshop Elements 11.   Please help.

Please see:
http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

Similar Messages

  • Since I updated my Mac to OS Yosemite, the scanner on my MX920 no longer works. I just get a questio

    Since I updated my Mac to OS Yosemite, the scanner on my MX920 no longer works. I just get a question mark in My Image Garden. It was working fine before the upgrade.
    Solved!
    Go to Solution.

    Hi lalyc,
    Reinstalling the printer using the latest drivers from the Canon USA website should get the scanner up and running.  
    Please click here to go to the Drivers and Software page for the PIXMA MX922.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded and installed the CUPS driver file from the website, please also install all other items from the RECOMMENDED FOR YOU and DRIVERS section of the website.  To install the rest of the software that comes with the printer, please follow the steps above, except for in step 2 you will want to click on the red arrow next to the "SOFTWARE" section instead of the RECOMMENDED FOR YOU section to locate and download the software.
    Once all items have been downloaded, please double-click on each of the items on your Mac to install them. If you plan on using the printer wirelessly, please be sure to install the Canon IJ Network Tool last after all other software has been installed; it should be the very last item installed.  Once all items have been installed, please restart your Mac and attempt to scan.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • After installing OS 6, I chose the option to have my podcasts download automatically, but they just say preparing to download and nothing happens. Is there still a way to manually download or is a fix coming?

    After installing OS 6, I chose the option to have my podcasts download automatically but nothing happens they just keep saying preparing to download. Is there a way to still manually download or is a fix coming?

    Am I doing something wrong?

  • HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software.  If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.

    I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.

    I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
    open disk utility, confirm that you only have 1 partition (mac journaled)
    restart and PRAM reset
    open disk utility and repair permissions twice
    restart boot camp assistant
    Does it work?
    If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

  • I get windows xp bsod after installing mac os x. please help.

    Hi.  I get windows xp blue screen of death after installing mac os x.  Please help.  I'm not a technical person.  Thanks.

    Boot into safe mode.
    http://support.apple.com/kb/ht1564
    Try OS X Recovery to run Disk Utility tests.
    http://support.apple.com/kb/ht1343
    Reset PRAM
    http://support.apple.com/kb/ht1379

  • My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard, what can i do?

    My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard (iTunes does not recognize the iPhone anymore) , what can i do?

    Try removing and reinstalling AMDS:
    http://support.apple.com/kb/HT1747
    (I requested deletion of your duplicate post.)

  • After installing reader 9 sucessfully on the imac it won't open and doesn't seem to be there. I do h

    After installing reader 9 sucessfully on the imac it won't open and doesn't seem to be there. I do have 5 installed but it won't work on new files. mac 10.6.8.Help.

    Can you see Reader 9 inside Applications folder? If yes, then launch Reader and then try to open any pdf via File->Open or drag drop on Reader icon in the doc.
    In case you dont find Reader 9 in your Applications folder then you can download and install the latest Reader from the following link: http://get.adobe.com/reader/otherversions/
    thanks,
    hit.anand

  • I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

  • After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone.

    After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)

    Try this!
    I had the same problem as you an it worked for me.
    http://support.apple.com/kb/HT1923

  • After installing iOS 6 update my ipod touch 5G doesn't work anymore

    after installing iOS 6 update my ipod touch 5G doesn't work anymore. Can anybody help me? Please!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After installing 10.7.2 update the OS does not boot.Any thoughts????

    After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

    Try the Lion Community, and bookmark the notebook community (this is not).
    You will probably need to provide others with more information too.
    Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

  • After installing elements 11 and using the editor, it will not reopen

    after installing elements 11 and using the editor, it will not reopen

    You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

Maybe you are looking for

  • Tax Code in Intercompany Billing

    Hi Gurus, I am creating an intecompany billing document, both the countires are different. I have three accesses in output tax condition. 1. Domestic, 2. Exports, 3. Dep country / Dest Country. Let us say the intercompany sales is between Germany DE 

  • Mac OS 10.9 and installati​on for Laserjet 1022n to our networks

    I work for a school district and have purchased new MacBook Pro laptops for all our preschool teachers.  I am trying to set up their laptops to our network printer in their classrooms.....however when I try and use the mac setup.....there is no softw

  • I've deleted my Mail app. How to get it back?

    Hi, I have somehow, by accident (I have no idea how) deleted my Mail app. It is not in my applications folder and I cannot find it in spotlight. Is there somewhere I can download it or will I have to reinstall OS X, which would be a horror? Any help

  • Filter Panel in Bridge not showing all the categories

    I am using Bridge CS5 and I download my photos to my laptop using Canon's EOS Utility program. In the Filter Panel on the left I get only a few catogories for some folders where for other folders I get the total of the categories. When I do click on

  • How to be sure port 10443 is open on  vintage airport extreme ( ufo shape, not square)

    My Denon 2112 AV reciever is having intermittent internet connect  issues. Denon says to be sure port 10443 in my router  is open. How do I check this and see if it is open on my vintage (ufo/dome shape) airport extreme?