PSE 11 and PSE 10 running on the same computer.

Can I install PSE 11 on my Mac without it affecting my version PSE 10? I want to run both versions on the same computer for teaching purposes.

And on a mac you can run them both at the same time, although it's usually best to open the older version first.

Similar Messages

  • Can a vodcast and a photocast run at the same time ?.

    Hi,
    I would like have a video podcast play and a photocast run at the same time is this feasible?
    Geoff

    Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
    -S

  • About Premiere: can Adobe CC and Adobe CS6 both run in the same computer?

    Hi, I have the Adobe Premiere CS6 installed in my computer.
    But now I'm gonna finish the edit of a film that someone already started editing.
    This person was working with Adobe Premiere CC.
    The question: If I install Adobe CC in my computer, will the Adobe CS6 still run?
    Can Adobe Premiere CC and Adobe Premiere CS6 both run in the same computer?

    Sure , you  can run all the version of same computer , even you can CC 2014 , CC as well as CS 6 on  same computer .

  • How to set Different applications running on the same computer to use different Gateways?

    Dear All,
    I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
    Is it possible in Windows7 with / without a third-party utility?
    Current scenario & requirements:
    I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
    Gateway for the first connection is 192.168.1.1
    Gateway for the second connection is 192.168.1.2
    I need to set my chrome browser & google talk to use the gateway 192.168.1.1
    I need to set my IE & skype to use the gateway 192.168.1.2
    Is it possible? Answers are appreciated!!
    Regards,
    Anees

    Hi,
    I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
    as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways. 
    Andy Altmann
    TechNet Community Support

  • Controllin​g a DOS applicatio​n (or another Windows app) with a LabVIEW applicatio​n running on the same computer

    Does anyone know how if it is possible to control a DOS application (or another Windows app) with a LabVIEW application running on the same computer.
    I need to send text to fields on the other (non-LabVIEW) application and possibly menu commands.
    If someone knows this is impossible, I'll take that answer too.
    Thanks

    It's certainly possible but how you do it depends a lot on the applications you want to control and whether you need to get data back from the other apps. Many Windows apps can be controlled via ActiveX. Many DOS programs can be set up by providing command line parameters and using the System Exec function in LabVIEW. You can find a number of methods by browsing through the discussions at http://exchange.ni.com/servlet/ProcessRequest?RHIV​EID=101&RPAGEID=105&UCATEGORY_0=_49_%24_6_&UCATEGO​RY_S=0&UQUESTION_0=How+to+control+a+Windows+applic​ation+from+Labview&UQUESTION_S=0. If you provide specifics about the programs you need to control, there may be someone here who can provide exact details. Good luck.

  • HT1329 i have a ipod nano 3rd generation and my iphone 3gs on the same computer if i move my ipod nano to my laptop and i move all my music to from my iphone to my ipod nano

    i have a ipod nano and a iphone 3gs on the same computer. Can i put my ipod nano on my laptop and put my iphone songs on my ipod nano?

    You can put the songs that on your iPhone onto your Nano as long as these songs are located in the iTunes library on the laptop.  If they are not you will not be able to sync them to the Nano and you will not be able to copy them directly from the iPhone to the Nano.
    B-rock

  • IPod Touch and iPhone - Syncing both on the same computer

    Is there any reason I would have a problem syncing both my ipod touch and a new iphone on the same computer? I want to have all of my music on both. My iphone arrives today and wanted to avoid any major issues.
    Thanks -

    Normally I would recommend this...
    Plug in the iPod, uncheck the box to show artwork on the iPod then sync the iPod (all artwork will be removed from the iPod).
    When it is done, reselect that check box and sync the iPod again (all artwork added to iPod).
    This often times clears up display issue with artwork on the iPod.
    However, I don't think you get the show artwork option for the iPhone, correct?
    Cheers,
    Patrick

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • Can you run Tiger and OS 8.6 on the same computer? RE: Repair Permissions

    Hello,
    I don't fully understand how "Repair Permissions" work and when it is needed and therefore I would like to post this question for some clarification. Using "Repair Permissions" for troubleshooting is a controversial issue. I read this interesting opinion about Repairing Permissions and now I am concerned that it may not be safe for me to install my old OS 8.6 on my OSX installed computer due to a "permission" conflict between OS 8 and OS X.
    Could someone confirm this with me please? Could this cause some file permission problems?
    I would use OS 8.6 to run my older Adobe Illustrator 8 application and photoshop 6. And then I will boot onto Tiger for everything else. I would switch a few times per day back and forth.
    Basically, is it safe to run Tiger on the same computer that has OS 8.6 installed on it? (I am not concerned about making 8.6 run in the Classic environment because I know that doesn't work - I am refering to having separate bootable installs)
    [1] http://www.unsanity.org/archives/000410.php
    PS I am aware of how to change my startup OS on this particular computer (b&w G3). I would have to have the two OSs on the same volume and launch X by pressing x -key during startup due to the fact that OS 8.6 doesn't have the Startup Disk feature introduced in OS 9. That was an earlier separate discussion that has since been solved.
    PS
    I could choose to instead use my OS 9.2 but I have reserved that OS for another computer unfortunately. However depending on the outcome of this post, I might have to reconsider.

    This is a really difficult issue to resolve! Apple doesn't have much documentation that covers running OS 8 & OS X on the same drive. There are, however, a few things that it might helpful to know:
    1. Repairing permissions with Disk Utility in OS X won't touch user-created files. It only repairs things that have a receipt file, which are created by installers. The unsanity reference explains this; you might want to review that part of the article again.
    2. Disk Utility has a separate repair OS 9 permissions function (accessed in the menus), but AFAIK, this only repairs permissions on the OS 9 system folder "blessed" by the Classic system pref as the one to use for Classic. I doubt this would be useful for the OS 8.6 system.
    3. Of greater concern than mis-set permissions is file system damage. Under no circumstances should you use any disk repair utility on a Tiger drive except those that "know" about Tiger's file structure. This rules out using Disk First Aid from either OS 8 or OS 9, or any OS 8 or 9 third party utilities. (See this Apple document for the details.) I don't know if this also applies to OS 8's 'rebuild desktop' function, but I would avoid it to be on the safe side.
    4. If you do decide to reformat or partition your drive for dual booting (as you mentioned in your other thread), do so only with Tiger's Disk Utility & remember to check the 'install OS 9 drivers' option or you won't be able to boot into OS 8 or 9, even if you have a viable system folder for either on the drive. See this Apple document for more info.
    5. In light of the above, it is well worth getting OS 9 to use with Tiger on your B&W, as long as any older apps you need to run are compatible with it. (There should be no need to use OS 8/9 with text files anyway, since OS X can handle all the old text formats.) In fact, unless you need to use some peripheral that has no OS X driver, you probably will do just fine by using Classic with the old apps, eliminating the need to reboot completely.
    6. If you need to buy OS 9, one inexpensive source is OWC's Mac OS 9.1 - OEM CD. At $35, it is a cheap way to avoid the headaches of OS 8 with Tiger! Note that you can upgrade from this 9.1 version to 9.2.2 for free with Apple's updates available from the Mac OS 9: Available Updates web page.
    Message was edited by: R C-R

  • Okay to have Ethernet and Wi-Fi running at the same time ?

    Hi,
    I've always been careful to turn off Airport before I switch to Ethernet.
    I was just wondering if it is okay to have both options running at the same ime and what consequences it may have.
    Thank you for reading this

    Coitus Interruptus wrote:
    +"Will the Mac use part of both simultaneously?"+the Internet and E-Mail.
    Hi,
    every IP based connection has a gateway that tells a device where to send packages that belong to the subnet the connection is in.
    Then there is a (one, and only one!) default gateway that tells the device where to send all packages that belong to no subnet of any connection. On OSX this is normally bound to the primary network device (the one that is on first place in the network configuration).
    So there is no problem having more than one network connection open. In your case, though, the WiFi connection would probably be in the same subnet as the wired connection. This doesn't pose a problem per se, but just is a bit senseless. It doesn't have an impact on networking, though.
    My sister suggested it. She knows Latin. It means "handsome boy", doesn't it ?
    In what reality?
    C.

  • Can I run a NANO and a 30GB Ipod off the same computer?  If so how?

    I just purchased a 30GB for one of my sons. Set up went find and several songs downloaded. We then erased the songs in itunes and set up a NANO that I got for my other son. Now nothing works.
    Can I run two different ipods off the same computer????

    There are a few ways of using more than one iPod on one computer, without having to delete songs etc.
    See this document for more detail:
    How to use Multiple iPods with one computer
    http://docs.info.apple.com/article.html?artnum=300432

  • Video out settings HDMI and Component out run at the same time?

    Does anyone know if I can get video out of both the HDMI port and component video connections at the same time. Trying to distribute video throught the house on component, and still get HD on the flat panel in the living room. Any help would be greatly appreciated.

    Apple says when both HDMI and component are connected, HDMI will take precedence over component. Short answer: no.

  • Can you have two copies of Encore CS6 running on the same computer?

    I'd love to be able to have two copies of Encore on the same computer. While one copy is encoding and burning, I'd love to get another project started and encoding on the same computer and maybe, if possible, even start burning to a separate external burner. But first, I'd love to just be able to have two copies of Encore open on the same computer. I tried copying the Encore CS6 folder to a different drive and then running it but it says there's another Encore in session and this may cause issues with the hardware.
    Windows 8.1 Pro
    X99 5930k 6-core
    32 GB Ram
    GTX 970 4GB GPU
    Thanks!

    I can't imagine Encore being able to run 2 instances.
    Build from Encore to an image (iso), and get ImgBurn. You can run multiple instances of ImgBurn and burn as many DVD/BDs as you have burners (including externals via USB or whatever). Send him a donation; his product is fantastic.
    http://www.imgburn.com/
    John Smith re avoiding unwanted addons in the download/install:
    http://forums.adobe.com/thread/1322583

  • Can 7.1 and 8 be installed on the same computer without conflict?

    I wrote a program in Labview 8.0 and want to run it on a computer that already has 7.1 (this computer has a lot of programs that we don't want to have to upgrade).  Saving as a previous edition created 5 pages worth of compatability errors.  Is it possible to simply install 8.0 in addition to 7.1 on the same computer without either program interfering with the other?  We use a DAQ card and GPIB.

    As Blair said, yes you can have multiple versions installed.
    You simply have to remember 2 important things:
    1.  Keep backups of the appropriate versions of vi's.
    2.  Remember to right-click on the vi and select Open With > select appropriate LV version.
    Instead of 2 (above), you can always start LV first and open the vi's from within it.
    RayR

  • Can Logic Pro and Logic Express coexist on the same computer?

    Hi all,
    I'm a fairly new user to logic. I started with Logic Express to test the water with it before committing to the Logic Pro. I decided I like it enough and have since purchased the Logic Pro upgrade.
    My machine is a MacBook. This machine travels with me, so I am rather concerned about having to maintain a dongle when I am on the move.
    Ideally, I would like to have both Logic Express and Logic Pro coexist on the same machine. That way, when I can reserve the use of Logic Pro for when I am in a stable environment but still be able to use Logic Express when moving around. Granted this would be with reduced functionality, but the peace of mind is worth that to me.
    So does anyone here know if this is possible and can direct me to some instructions on how to accomplish this?
    Thanks!!
    Darth Vanva

    I'd LOVE to be able to enable two simultaneous instances of Logic to accomplish what I want, but AFAIK that's an impossibility (unless a guru-whiz-type like Justin has some ideas on this...).
    OK, here's the deal...
    I have 6 gigs of RAM now. While using Logic I can access up to 3G for samples. If I could somehow run another copy of Logic on the same computer (acting solely as a host for additional plugs, not for sequencing) then I'd gladly buy 2 more gigs of RAM so that the second instance of Logic could address 3G more. I'd still have 2G left for system headroom.
    And there would be an additional (if not hypothetical) benefit to doing this...
    Right now I can run stand-alone instruments outside of Logic (accessed via IAC) in an effort to overcome the 3G limit. But take GPO for example: I can only run 1 instance of it. And, there is no provision for saving any edits or custom made instrument sets in the stand-alone version. So not only would I be limited to 8 individual instrument slots in the lone GPO player, I wouldn't be able to save any custom programming. So much for recall... And of course, EXS is not a stand-alone plug so there's no way I could use it outside of Logic.
    BUT... if I had this second instance of Logic running and treating it as a plug-in host, I'd be able to run multiple copies of plugs (just like I'm used to) and never have to deal with any stand-alone players. And of course by saving its song file I thus save all of my custom programming.
    So yeah, it would be fantastic if I could run a second instance of Logic on the same computer. Theoretically.
    Message was edited by: iSchwartz

Maybe you are looking for