PSE 11 don't see my Printers

PSE 11 don't see my Printers. But PSE 8 works with no Problems. After an Error message I cannot enter ( and change ) the Printer menue . Have anyone an idea what the problem could be.

the massage was in german =>Die gespeicherten Druckerangaben sind mit  dieser Version von Photoshop Elements nicht kompatibel......Vor dem Drucken müssen die Druckereinstellungen geprüft werden<=
But meanwhile I sloved my problem :
the printer is connected to an second PC within a network (Brother HL 5130 on XY PC;marked as Standard Printer). I call the Printer via this PC and then I get the massage above. Now I connected the Printer direct to the PC with PSE11 and made this Printer to my Standard Printer (Brother HL5130). Then I connected this Printer to my second PC again. Now it works.
Question for me is why only PSE11 caused this Problem and not PSE8.
Thanks all for your helpful answers

Similar Messages

  • Mac can not see any printers.

    Mac can not see any printers.
    I have 2 other computers (1 windows / 1 Mac Book) using the printers just fine but once device can not even find a printer. Any ideas?
    Printer is Ricoh Aficio MP C3501
    The computer could not find the printers so I cleared them from system preferences. Updated everything, including downloading the most up to date driver, restarted and still can not see any printers.
    Thank you for your help,
    Darren D

    Hello ddelin,
    Welcome to the Apple Support Communities!
    I realize that two out of your three computers can see your printer, but one MacBook Pro will not. You have also done some great troubleshooting by deleting the printer, installing drivers, and trying to re-add the printer. If the issue continues, I would suggest resetting the printing system. Please use the attached article for more information.
    Troubleshooting printer issues in OS X - Apple Support
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Best regards,
    Joe

  • I can't sync my iPhone5 to iTunes.  The tutorial said to click on devices, but I don't see it anywhere on my computer screen.  HELP!

    I am trying to sync my iPhone 5 to iTunes in order to download some new tones.  I did this back in December and didn't have any trouble.  Now I can't seem to do it.  The tutorial says to click ITunes open and then click on devices.  I don't see devices anywhere on my computer.  I do have my phone physically plugged into the computer, so I don't know why it isn't showing devices or the option of "Sync Now".  What am I doing wrong?  It's probably something very simple I'm overlooking. 

    It is referring to under devices in the iTunes source list, not on your desktop.
    http://support.apple.com/kb/ts1538

  • Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

    ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

    Rotate your phone to landscape.

  • I'm having trouble loading photos on my I phone 4s and I pod.  I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

    I'm having trouble loading photos on my I phone 4s and I pod.  I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

    What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
    Matt

  • I now get a blank (white) screen in the Viewer.  Can still drop video from the viewer into the canvas, but don't see it in the viewer.  Please help!

    It doesn't seem to matter what project I'm working on... the picture in the viewer is gone.  All I see is a blank (white) screen.  If I put the cursor over the viewer and drag to the timeline, the clip will appear on the time line (and in the canvas) but I don't see it in the viewer.  I usually edit my clips in the viewer and not on the canvas.  Can anyone explain why this might be happening and how I might fix.  I'm suspecting I must have messed up one of the settings but I'll be darned if I can figure out which one or how to fix.  Please help!

    David.  Thank you very much.   The problem was not with the canvas but rather the Viewer.  But the solution was the same.  Somehow, the Viewer window was re-set to Alpha.  I changed it back to RGB.... and the picture is back.   These issues are often very simple.... but they can drive you bats if you don't know the answer.   Very grateful.  Tim

  • I have an ion guitar and I can't get it to play? It says I need to aggregate MIDI but I don't see that button on 10.6.8.

    I have an ion guitar and I can't get it to play? It says I need to aggregate MIDI but I don't see that button on 10.6.8.

    Try this:
    http://support.apple.com/kb/HT2519

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

  • HT204150 After having upgraded to mountain lion, the application "contacts" doesn't run. I don't see any contact and add new contacts . The application doesn't run

    After having upgraded to mountain lion, why the application "contacts" doesn't run? Why is impossible add a new contact and I don't see old contacts that I can see on my Ipad?

    I have the same problem. I would like to include this information:
    .- A message "error CoreDAVerrorDomain 1" is shown
    .- with other user, in the same MAC I do not have the problem

  • Hi, Joann JustAnswer has asked me to answer your question -- "I have iPad 2 and I don't see the little box at top in safari to let me see the open pages I have. In iPad 1 it was next to the open book at the top

    Hi, Joann
    JustAnswer has asked me to answer your question -- "I have iPad 2 and I don't see the little box at top in safari with the number on it that I can tap to get to my open pages
    On iPad 1 it was next to the little open book

    Not with iOS 5 no. A number of other people have made the same comment about it, so you could try leaving feedback like some of them will have done, and maybe in a future iOS update we'll get the choice : http://www.apple.com/feedback/ipad.html

  • Animated gif don't see

    Hello:
    I have imported an animated GIF in Director MX and when I
    drag to the stage
    I don't see the image in the stage (only an empty square) In
    the cast I see
    the first image of the animated GIF.
    I imported with the Menu Insert/Media Element/Animated Gif.
    Can you help me please?
    thank you very much,

    try loading the Animated GIF QuickLook plugin
    available for MacOS-X 10.5/10.6
    http://sourceforge.net/projects/animgifqlgen/?source=dlp
    you can quicklook the gif thru the finder and set the default application as the File Viewer to open the gif files

  • How do you turn on the radio feature?  I don't see it on the home screen.

    How do you turn on the radio feature?  I don't see it on the home screen.

    If you don't see the radio icon on the home screen, it is likely just turned off in the settings. Go to
    Settings > General > Home Screen >
    There you will see radio listed. Make sure that the slider is set to ON.
    i

  • I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

    I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

    iTunes- How to move your music to a new computer
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

    I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

    Hi wmcknigh,
    Welcome to Apple Support Communities.
    The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
    If you don't see your family's shared content - Apple Support
    Cheers,
    -Jason

Maybe you are looking for

  • Consolidating DSOs

    Hi Guys, I need to merge two DSOs A&B in to third DSO C. I have same key fields in each of this DSO.When I create two transformations , Iam unable to see the consolidated data. In change log of DSO C , its showing both DSOs A & B Data one after other

  • Why is moving from FiOS so hard? And why do I have a two-year agreement?

    To begin, Verizon FiOS service is great! It only went out once, due to a failed battery in the sytem and was corrected ASAP. The local technicians are personable and quick. Now, my fiance and I are moving to a location that doesn't have the FiOS serv

  • How can I save a set of rules to easily make a number of changes at once in Adobe Acrobat 9?

    So as of right now I'm importing a huge old paper trail into PDF format via scanning. Once those files are scanned, is there a way I can set up a simple rule or save a set of processes as a rule to: A) Add a watermark that says "DEPOSIT" and the date

  • Create a BSP  based on R/3 program

    Hi all, My question is if it is possible to transform an already existing R/3 program to a BSP, without the need to re-write the program. I, for example, would like to transform the standard program SAPLRHP6 to a BSP. Sorry if this question is stupid

  • Two app questions

    Ok all, I have two app questions. 1. Ever since the IOS 5.1 update, some streams on Tune In Radio Pro do not play in stereo and I can't find a way to fix it! I've tried turning mono audio on and off, turning AAC streams on and off, and still nothing.