PSE 11 - How save image with printer color profile?

I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer? Thanks.

You can print a photo using the correct printer profile for the lab printer. In the print dialog box , go to "Page Option>Color Management" and then choose Color Handling as "Photoshop Managers color". Now click the printer profile dropdown and choose the profile for your lab printer. If you are not able to find the profile for you printer  then choose "Printer Manages Color"
To your second question the answer is that you cannot save the image with the correct colors for printing. You can only convert the profile of your image to Adobe RGB which matches gamut of most printer profiles using "Image Menu>Convert Color Profile and choose Adobe RGB.

Similar Messages

  • Lightroom 5.6 crashes when images with some color profiles are in import

    I am a recent subscriber to Adobe CC. I run LR 5.6 64bit on my Win 7 PC. Whenever I seek to import images previously processed in iPhoto or LR elements into my catalog, ACC Lightrom crashes. I suspect it is because the original editing program used a different color profile. Adobe techs will not give me an answer when I ask for an overall cure. Are their any technical documents on the web that would enable me to deal with this issue? If so, I cannot find them, and I do not want to call Adobe again and again to get LR 5.6 restored.
    David J. Krupp

    my-wedding-foto.de wrote:
    Lightroom 5.6 Win8 64 import of some photos are not possible: the photos are grey, the file name of the photos are already excisting in the catalog, older different photos, don’t Import Suspected Duplicates is not selected. There is no difference selected or not, the photos (Import are not possible) are always grey with the notice: These photos would be already imported! All other photos could be imported and gets grey.
    When Lightroom greys out a photo in the Import dialog box, it means the photo is already in the catalog. It doesn't mean that it is matched with an older photo with the same name ... in order for there to be a match, the file name and capture date and file size must be identical.
    So Lightroom thinks you have already imported the photos, and you think the photos have not been imported. Now I'm sure you are a very nice person, but I believe Lightroom. What you need to do is to find the photos in your Library Module and use them there. The photos can be found by searching for them by file name, after turning off all filters, and after clicking on All PHotographs in the Library Module.

  • How do i add printer color profiles

    I am trying to add some printer codes for photo printer on printing services. I have the Icc profile but cant add them?

    Hi,
    I think you can find the profiles in:
    /Users/<username>/Library/ColorSync/Profiles or
    /Library/ColorSync/Profiles
    You can delete the profiles as all other files.
    Oh, you can use the ColorSync- Utility to. Klik on Devices and click on a profile to see its location.

  • How to assign a specific color profile to an image?

    I am in the process of submitting an image electronically.
    They want me to submit images that have the color profile "ISO Coated v2 ECI".
    My image has the color profile "Adobe RGB (1998)", according to File Info, and according to Preview.
    I have downloaded the color profile from eci.org and put them in /Library/Color Sync/Profiles.
    When I open the image in ColorSync Utility, I can see the profile under 'Profiles'.
    However, when I try to assign or match or apply the profile to the image in ColorSync, it does not "stick".
    With 'Match to Profile', I can select the profile (in the dropdown menu under 'Output'). But when I then save the image (using Save, Save As.., or Export..) it seems like it does not put that profile in the image, i.e., when I open the new image using Preview, I still get the "Adobe RGB (1998)" profile.
    Same with 'Apply Profile'.
    With "Assign profile", the profile I want is greyed out.
    I also tried Pixelmator, but that does not offer me the profile "ISO Coated v2 ECI".
    Am I missing something?
    Could some kind soul please shed some light on this?
    Or point me to the right web page or forum?
    All insights and suggestions will be highly appreciated.
    Best regards,
    Gabriel.

    Thanks for your response.
    But, first of all, the profile I want to "set" is not in that list in Preview.
    Second, I believe now that I don't need to just *assign* the profile, I need to *match* the image to it (the profile is an output profile).

  • When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image.  When mirroring the image the print colors are muted.  Not mirrored and the print colors are perfect.  Any suggestions?

    When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image.  When mirroring the image the print colors are muted.  Not mirrored and the print colors are perfect.  Any suggestions?

    CS5
    On Tue, Oct 7, 2014 at 9:49 AM, ADBEDesigner <[email protected]>

  • I cannot open a printer color profile document with a .icm extension in cs4?

    I cannot open a printer color profile document with a .icm extension in cs4. please help?

    You don't open them, you just have to put it in the correct folder which depends on what your operating system is.

  • Image with fill color

    Hi all,
    Is there any script which can find images with fill color applied?
    Please pass the JS code if anybody has.
    Thanks in advance.
    Tan

    Thank you all.
    It is difficult to me. Could you please provide me simple JS code.
    Thanks

  • Access image size and color profile

    Hi all,
    Is it possible to access image size and color profile ? If not, will it be possible in CS6 ?
    Thanks.

    Load the external XMP library and get it from that?

  • How Can I add a color profile to OS X 10.8.4?

    How Can I add a color profile to OS X 10.8.4?
    I've tried to locate the color profile folder but it's not availble.

    Hello gipseyeyes,
    It sounds like you're trying to add a ColorSync Profile to your Mac.  I found a few resources that may help.
    First, I recommend reviewing the following article:
    Mac OS X: How to Create a ColorSync Profile Used By Every Account
    http://support.apple.com/kb/TA22329
    The note in step 6 from that article is particularly useful for your situation:
    Note: You may need to make some of these folders if they do not exist.
    Also, the user Library in Mountain Lion is hidden, so you will need to follow these steps to get to "~/Library/ColorSync/Profiles/":
    OS X Mountain Lion: What is the Library folder?
    The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
    You can find the full article here:
    OS X Mountain Lion: What is the Library folder?
    http://support.apple.com/kb/PH11395
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to superpose two image with transparency color

    Hi,
    I like to superpose two image with a transparency color. I know it is possible but i do not know on which API i can find it.
    thanks

    http://developer.java.sun.com/developer/JDCTechTips/2002/tt0618.html
    http://java.sun.com/products/jfc/tsc/articles/swing2d/
    Try these they discuss transparent images.
    rykk

  • Photoshop diplays all images with desaturated colors (Images look fine when opened in other apps)

    All of a sudden, when I open any image in Photoshop, the colors appear to be desaturated...In Photoshop only. When I open that same image in Window Picture Viewer, or Quicktimer, or even if I drag the image into a brower window, the colors appear fine. But in Photoshop, something is clearly wrong. Now, I can make color adjustments to the image, but when I save and reopen reopen it in another application, I can see that color changes have been made, but they still don't match what Photoshop is displaying.
    The images are RGB image...I've checked the color space setings in Photoshop, and they are the default (Edit > Color Settings: North American General Purpose 2 / RGB: sRGB IEC61966-2.1 / CMYK: US Web Coated (SWOP) V2, etc, etc). I also made sure View > Proof Setup was set to: Working CMYK. I even reset Photoshop to it's default settings (by holding down CTRL-ALT-SHIFT on launching Photoshop)...But the images still appear desaturated when I open them in Photoshop...So, I don't understand how this is still a Photoshop problem...But then again, they look fine when I use any other application on my computer to open them, so it's clearly not an issue with my monitor.
    The frustrating thing is, I haven't made any changes to Photoshop OR my monitor (that I know about)...Photoshop has worked perfectly for me for years, and now there's this SNAFU that I just can not figure out.
    Any suggestions?
    I've included a screenshot below to show the disparity between an image opened in Photoshop (on left) and Windows Picture Viewer (on right):
    Photoshop image on left, with desaturated colors...Same image in Windows Picture Viewer on right, where colors appear normal.
    Any and all help is much appreciated : )
    Best,
    -Austin

    It's difficult to provide help without knowing your level of color-management expertise, but I think you've helped us some with that in post number 2.
    Color management is basically this:  Images and devices have certain color characteristics, and these are described by color profiles, sometimes also called color spaces.
    1.  You should not need to use the Proof Setup at all to view your images on your monitor.  When things are set up properly Photoshop shows you accurate color without your choosing View - Proof Colors.
    2.  A color-managed application like Photoshop will try to show you accurate color on your display by interpreting both the image profile and your monitor profile and transforming the colors accordingly.  BY DEFINITION this will look different than other applications which don't do color-management as these just pump the image RGB values directly out to the display. 
    Thus:
    If your monitor profile indicates your monitor has a wide gamut, images with embedded profiles may appear less saturated inside Photoshop than from non-color-managed apps.
    If you view images that have an embedded wide gamut profile (such as Adobe RGB 1998 or ProPhoto RGB), Photoshop and other color-managed applications will interpret that profile and the colors will likely appear more saturated in Photoshop than in a non-color-managed application.
    It sounds as though the first case applies in your case here.
    You can check to see what monitor profile is associated with your monitor through OS settings.  I'm thinking, based on the caption buttons in your screen grab, that you've got Windows XP, but rather than go further with that assumption, I'll ask you to verify it first.
    -Noel

  • Lightroom 5-problems with print colors

    I have Lightroom 5 and am having problems with my prints.  They look great in LR, but when I upload them to different websites for prints skin tones have a grayish-green cast to them and print with the grayish-green cast.  I can pull them up in other applications, i.e. Windows photo gallery and Facebook and they look fine.  I checked my preferences and they are set to sRGB.  Any other ideas?  For example I made an invitation for a friend, the pictures I processed in LR and then used Photoshop CS4 to make the invitation.  The invitation colors printed great.  She liked the pictures I had taken and asked to have those too.  When she printed the actual pictures they had a grayish-green tint to them but the invitation looked fine even though it was made from the same pictures that came out grayish-green.  Any help is greatly appreciated!

    daniellem5290598 wrote:
    I have recalibrated my screen and the pictures still look the same.   I looked in my LR and made sure that sRGB is selected for the color space for external editing.  Is there a way to check if the pictures exported with the prophotoRGB instead of sRGB?  I tried looking in properties on the photo and didn't see anywhere where it would tell me whether it was sRGB or prophotoRGB.  I am kinda new to all of this so maybe I am looking in the wrong place, but I was under the details tab in properties on the photo.
    The recalibration was just a "also nice to make sure you have done this". Just to check if you don't have another rare problem. The root cause of your problem is clearly that your exports are not sRGB. You set that in the export screen as Per nicely shows. You should keep the color space for external editing that you set in preferences at prophotoRGB. That one has nothing to do with your exports and you're usually better off using the default.
    You can check your exported images using several options. On Macs, you simply open it in preview and do a get info (command-I) on it or use Photoshop. You can also see the color profile in the "more info" tab in the "get info" panel in Finder. In the general pane you will see the profile name. On a windows machine it is somewhat more difficult for me to tell you as I have none anywhere near but if you have Photoshop, you can open your jpeg in that and at the bottom of the window click the little sideways triangle that points to the right and select "Document Profile".

  • Using a mac. will not print...no image with print preview ...why no print image?

    why no image when use print preview nor with print function? using a mac

    Hello my friend,
    When troubleshooting we look to see if the problem is local or global.  Again, you may very well know this so apologies.  Anyway, if you haven't already, then please create another account on your Mac.  You should do this anyway, actually everybody should.  (The Tim knows).  So test to see if the problem exists in the other account as well.  I name the extra account maint and make it an admin account.  If you find that it prints normally with the maint account, that is good, because it just means that one or more of your local account preferences are munged in the primary account.  Global on the other hand is a bit more work to solve.  If that's the case you can try reinstalling the operating system.  In most cases that will overwrite the low level culprit and put you back in the sweet zone.  Let me know how it goes, it's an interesting problem.  I like those.  Especially when they aren't mine.  ;-)
    I have been supporting Ma cs for a very very long time.  If IICX rings a bell.  Anyway, just reinstalling the OS over the top is pretty quick.  However, we techs like to find the little sucker that's causing the problem and we can spend many hours scouring to locate it.  It's a challenge to us not to let the computer get the better of us.  Win.  But the reality of it is often a simple OS reinstall will get you back in the game.  Beyond that is a hardware problem concern.  To me from what you describe it sounds software to me.  So don't worry too much about that at this point.
    Peace, Tim 

  • How do I disable printer color management so I can get clear photos using adobe?

    My printer is an Office Jet Pro 8500A Plus. My operating system is Windows 7 Pro 64 bit. I get excellent photos if I print from Windows Media. When I print from Photoshop Elements 10 all images are blurred and dark. Photoshop says to disable printer color management in printer preferences but there is no link.

    I have researched the matter a lot and I, 
    along with many others, still have problems with this complicated 
    subject.
    Color management is as simple in theory as Honoring a Source Profile and CONVERTING it to a Target Profile (monitor or printer) for Proofing.
    But yes, we work at the mercy of the rocket scientists who try to dumb an extremely complicated process down so regular folks (like me) can make it work — trouble is I think their approach needs a bit more distilling and common sense sometimes...but it is very doable once you put in the time to figure it out, just follow the CHAIN in your workflow if you're still having problems.
    If you want a "simple button" try staying in sRGB and printing out of Apple Preview app using OEM standard papers matched to your printer and OEM ink set.

  • DCTDecode filter used for image with Indexed color space?

    I've seen examples of images in PDF that have BitsPerComponent=8, with an Indexed Color Space, but the filter is DCTDecode.  This doesn't seem intuitive to me, as JPG supports 24-bit RGB and 8-bit gray.  I haven't heard of 8-bit color JPG so I'm just wondering how this is done?
    I'm just trying to understand how this works if someone could please indulge me with a technical explanation it would be most appreciated.  I understand how the image is represented using the colorspace, I just don't understand how this filter is applicable to 8-bit data.
    Please note, I understand that it's not an actual JPG file, that the data is only using the compression scheme.

    DCTDecode is entirely legal for 1-component (greyscale) samples as you've noted. There is no problem there.
    Remember, that applying a filter (and later decoding it) is entirely separate from the meaning of the data. So it's possible to use filters that just don't map correctly to the data. For example, greyscale DCTDecode could be used to encode samples which were, on decoding, to be treated as RGB. It wouldn't compress well, but the meaning isn't affected.
    But DCTDecode for an Indexed colour space is very unusual. Don't look for special treatment, it would be enconding the image data, which would be offsets into the colour table. And of course DCTDecode is lossy, so decompressed data should be close, but is not always equal, to the original.
    In most cases of Indexed colour, this would lead to random and useless changes to colours. But it is entirely possible to have colours which map into a linear and smooth set of shades of the same colour - such as 256 shades of pink. An image using such an Indexed colour space is a candidate for using DCTDecode.
    In using filters, it is best to forget what you think you know about the data, and just follow the precise rules of the filter.

Maybe you are looking for