PSE 11 locks up after I open it.

Help, I have tried to unistall, ran fixit and then went thru the shared technologies and still nothing.  I am not interested in purchasing a new version as this one is less than a year old.  Can anyone help?

Hi,
Is it happening for both Organizer and editor?
Thanks,
Anwesha

Similar Messages

  • After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app

    After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app

    Tonebox,
    I couldn't get my camera to work smoothly
    the 1st ten times,or so,I tried to open it.
    As it turns out,it isn't as pressure sensitive as I have
    grown accustomed to, and required a gesture that feels
    rather awkward, by comparison to the ones I have been using.

  • PSE 8.0 Will Not Open (Including Editor and Organizer)

    I have been using PSE 8.0 for three or four years now, and I have never experienced any problems with it. Today, after installed a Wacom Intuos Creative Pen Tablet, my PSE 8.0 would not open-- nor would Editor and Organizer. I tried uninstalling and reinstalling the program, renaming certain files (as read in other answers), creating shortcuts to bypass the Welcome Screen (which also will not appear), among other solutions that I read about for similar problems. Whenever I attempt to open Organizer, a crash report appears, stating that the program has quit unexpectedly--that's all it says. If I try to open PSE 8 or Editor, the circle next to my cursor appears for a moment, but soon it disappears without a single pop-up or explanation as to why the program won't open. Since I cannot access the Welcome Screen, I cannot locate the Preference file to change the name/delete it.  If it matters, I use Windows 7.
    Any and all help is appreciated. I'm going a bit insane without my lovely Photoshop to doodle in. ;n;
    Thank you,
    ~ Mongoose

    EDIT: I found the Preferences within the PSE folder, and I renamed it; afterwards, I tried to open PSE again. It reset the Preferences, yet it is still telling me that PSE has unexpectedly quit. /EDIT
    I went into the PSE folder and attempted the "three finger salute" while clicking on Organizer, but all it brought up were the Organizer Properties.
    Also, within the past hour, PSE has been randomly popping multiple times up to inform me that it unexpectedly quit, yet I have not tried to open it recently. I am not sure if that is important or not.

  • PSE 11 Organiser won't open

    After a bit of a struggle with the installation of PSE11(via trial then entering authentication) , then successfully downloading photos, I now find PSE 11 Organiser doesn't open. After the fraught install, this new problem is a new hurdle.
    Has anyone else had this problem and, if so, please can someone give me some simple instructions to rectify? 
    Thanks,  Alison.

    Try these solutions to see if any of these work.
    If none of them works, let me know.
    Solution1:
    Close Elements. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file. Click Yes. Elements will open with default preferences.
    Solution2:
    In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution3:
    In case that does not work too, you may try this.
    Try launching with anti-virus off or removing PSE from conflicting list.
    Regards,
    ~V

  • Data lock even after commit work and wait

    Hi Experts,
    Data is still locked even after commit work and wait step has run, which made me very confusing.
    The following are the details:
    These steps are in a FOP.
    Step1: Change Move-in Date of a move-in document in background after get the new move-date from user.
    Step2: Run BAPI_TRANSACTION_COMMIT and pass the wait parameter.
    Step3: Bring move-in document transaction to the user for other information changes.
               After the user confirms the changes and presses SAVE button, error message shows that the move-in document is still locked. But no other transaction is opened for the specified move-doc changing.
    Does any1 have any idea on this? How can I solve this issue?
    Thanks in advance and points will be rewarded.
    Vincent

    Hi,
    Normally every BAPI will work on Update task so that the data will be updated once the commit work is done. For the commit work, we will normally call the bapi function module - BAPI_TRANSACTION_COMMIT. It should work.
    In your case, just try the below option:
    Please call the bapi - BAPI_ACC_DOCUMENT_POST & BAPI_TRANSACTION_COMMIT in a seperate function module and call this function module in your program (just pass the import / export / table parameters accordingly).
    For the information, I had once a similar type of issue and it got solved once I did like the above.
    Regards,
    Selva K.

  • My iD password and i cloud is stolen then who stole this they deleted this and my iphone is locked and i cant open it please help me to open my i phone

    Hi how are you im from israel i buy i phone 5 from celcom company after 7 month some. One stolen my. Idpassword and icloud and. My i phone is locked know i cant open it any more and i give my i phone to. Cellecom company then they tell me that the company cant fix it i dont know what to do. I still pay money to the company and my i phone is locked please help me what to fo

    You are going to have to either Send it to apple or try one of these strategies in this link. http://support.apple.com/kb/ht1212
         Hope this Helps Jake

  • Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it t

    Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it to be continued after opening the ipad and continue navigating the digital publication.

    yes,thank you for ur answer,  but the owner of the publication which I working on said for  me that this is a problem, and we can't submit the digital publication if I can't fix it.
    Is their any solution to make the audio run after the device is unlocked.

  • Multicam keeps locking up after 12 minutes of perfection!

    I'm having the weirdest problem with FCP's new multicam feature which I can't figure out if its a hardware limitation or a software problem.....
    I've got 3 angles captured via OfflineRT, and I'm editing as if trying to make a "live" switch of the footage. For the first 12 minutes, it worked PERFECTLY. I was shocked and excited at how smooth my little project was coming together. Each edit being made exactly where I wanted it to. Happiness seemed inevitable.
    Until I reach the 12 minutes point....
    After that, it keeps locking up. The program doesn't crash, but it refuses to play. I get 5 seconds of video, then the spinning beach ball for 50 seconds. No edits recorded. No nothing. It brings my system to a screeching halt until I shut down and restart, only to continue once again after I open FCP.
    What the heck is going on? It was working perfectly, then just - stopped, and hasn't sense. I've lowered playback resolution to 25%, changed everything to work at the lowest rate possible - I've done everything and anything to help free up memory. Nothing works. I delete all of my previous edits off the Multicam Timeline. No go. Absolutely nothing seems to make a difference... and I don't know what the heck to do!
    I'm running on a PowerBook G4 867, 1.12 Gigs of RAM. I know it's slow, but I've cut two feature films on this thing with no problems until now. I almost want to believe the hardware is just getting too old for FCP5.... but why would it work for 12 minutes then just stop?
    Any help would be much appreciated!!

    Hey Patrick! Thanks for writing back so fast.
    1. It's after 12 minutes in the timeline.... that's when all the trouble started. Of course, at this point, it won't even work at all. Stops playing at the exact same place every time.
    2. Activity Monitor says only 16% of the CPU is being used by FCP, and 692 megs of RAM is being used overall. Doesn't seem to be maxxing out....
    3. The file size of the project is huge.... which sort of baffles me. 9.2 megs. Features I've edited have smaller project sizes than that, with 5 times the amount of edits. What the heck is going on???

  • HT201263 iPhone 4s locked up after failed attempts. Power button is jammed

    My friends iPhone locked up after he forgot his password. He gave it to me because I usually fix iDevices around my school. Well, I thought it would be a simple fix but his power button is jammed. I can't enter recovery mode to restore. I tried using tinyumbrella to enter recovery mode but it isn't detecting his iPhone. I need help. Please

    When the iPhone turns OFF due to battery running down, open iTunes on computer, hold down Home button and keep holding while connecting iPhone to computer, keep holding until iTunes recognizes iPhone in Recovery Mode (this should take less than 20 seconds of holding down home button), then click Restore button of iTunes.

  • Time machine backup space after I open iPhoto

    Hi, yesterday, after I had wrong delete some photo from my iphoto library, I have decided to restore entire iphoto library from Time machine backup.
    I have select last backup and I select desktop destination folder for restored library. Then, i have delete original library and cut paste restore library from desktop.
    I have backup all with time machine.
    Now, when I open iphoto and close it without any changes, Time Machine backup always 450mb...
    Is normal?? I have fixed permission and restore iphoto database.

    Vailfox wrote:
    Ok, I have tried TimeTracker with these results:
    in iPhoto Library
    -> Database folder = 171MB
    If you're really making no changes at all, not even browsing, I wouldn't expect much to be backed-up.
    I don't have a current version of iPhoto avaiable at the moment, so can't check.  But with a fairly small iPhoto '09 library (just under 1 GB), it backs-up just under 1 MB after just opening and quitting.  It's no doubt making some minor changes to lock and unlock things, perhaps keep track of when things were lasted opened, etc. A lot of it appears to be metadata.
    That likely explains the database changing -- if anything changes in any kind of file, including a database file, the whole thing gets backed-up next time.
    -> Thumbnails/Segments folder 181MB
    The backup data regards only iPhoto.
    Should I regenerate iPhoto Thumbnails?
    Might be worth a try.
    Stil, I wouldn't worry about this too much -- as Time Machine deletes all but the first backup of the day after 24 hours, the most space those backups will take is 400 MB/day.  And, after a month, they're further "thinned" to one per week.
    Not really a lot in relation to a 32 GB iPhoto library.

  • Why does Firefox close after being opened for too long with no activity?

    I need to leave an image loop playing on my computer continuously but the internet browser seems to time out after being opened for more than 14 hours. Is there a way to keep my internet browser opened with out activity for as long as I choose?

    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866''' {web link}
    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings. It was suppose
    to have been fixed in v30.
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.

  • Num Lock Off message upon opening lid

    Hello,
    I never use the num lock, yet when I open the lid and unlock the laptop by entering my password, the num-lock symbol is constantly on and remains on. Sometimes if I close the lid and open it again the symbol will go away, but this is a hassle. Any tips? Advise?

    "I don' think you fully understand the issue"
    I agree. Due to lack of accurate details in the original post.
    Here's the current behaviour on my system:
    1. Whiled logged in, in an Windows desktop session, default num lock state is off (no message nor symbol is displayed on the desktop).
    2. Upon pressing Fn+ScrLk (NmLk), a "num lock on" symbol indicator is displayed on the lower right hand side of the display.  The symbol remains visible for the duration of the "num lock" in the on state.
    3.  Upon pressing Fn+ScrLk (NmLk) again (while the "num lock on" symbol indicator is displayed on screen), the "num lock on" indicator is then replaced with a "num lock off" indicator".  This indicator does not stay visible indefinitely, and will fade out and finally disappear after a few seconds of the action.
    I don't get a "message"...

  • Itunes Locks seconds after loading

    Recently my itunes has started to lock just after loading, it opens then begins to check the podcasts then locks, i can do nothing after that point apart from close it from the task manager. i have repaired, uninstalled and reinstalled it but still nothing, it does it regardless of having the ipod connected.

    seems to be the podcast issue, and seems to be working after i deleted some partly downloaded tmps

  • Lock fields after send a PDF file

    Hello all,
    I have done an application that consists in fill in many fields using Adobe LiveCycle Designer 8.0 program.
    After many fields are filled, I click on a Regular button that sends an e-mail.
    When I receive the e-mail, I download the attached pdf file to a determined folder.
    The problem is that when I open this generated PDF I am able to edit the fields.
    Is there any way to lock fields after clicking the Send button?
    Thanks in advance.
    Best regards,
    Roberto

    After your code for emailing the form, place additional line of script for making the form as editable..
    Language: Java Script/ FormCalc
    <parentSubform>.access = "readOnly";
    parentSubform is the root subform node of your form..
    Thanks
    Srini

  • I just went to the new Lion OS from Leopard OS, and when I'm on the internet, it locks up after about 5 or 10 minutes. WhY?

    I just went to the new Lion OS from Leopard OS, and when I'm on the internet, it locks up after about 5 or 10 minutes. WhY?

    From Leopard or Snow Leopard? If the former then I suggest you erase the drive and reinstall Lion:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Be sure to run Software Update for any additional updates.

Maybe you are looking for