PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly

Changed Profiles after printing many prints.. this time the first print was dark/black muddy as on my previous discussion... follow up prints fine....
see early discussion about 12 hours ago

I will suggest you to re verify that the Profile of your image and Profile of printer are same.
PSE11 prints an image in two different scenario:-
1. When Color Handling is governed by Photoshop Elements and 2. When Color handling is governed by Printer
I will explain you these two scenario in detail.
1. Open your image in PSE11.
2. Go to Image > Mode and note down the image mode.
3. Now launch Print dialog.
4. Click "More Options" button present on Print dialog.
5. Now select Color Management tab.\
6. Here you can find Image Space , this should be same as you noted down in 2nd step.
7. From here you can control Color Handling options.
    a) From "Color Handling" drop down you can select either "Printer Manages Color" or "Photoshop Elements Manages Color".
    b) If you select Printer Manages color then you can see the profile of your printer in Printer Profile, that you cannot change.
    c) But if you will select "Photoshop Elements Manages Color" then you can change the Printer Profile.
   Now in both cases, for best result, make sure that that Image Space and Printer Profile is same.
   Also if you are using Photoshop Elements Manages Color then please turn off the Color Management of printer from your Printer Preferences option.
If your Printer Profile is known to you then you can also change the Image mode from Image > Mode menu.
For best result of printing it is necessary that both Image and Printer profile are same.
Hope it will help you in your problem.
Cheers !!!

Similar Messages

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

As suggested by adobe support contacted Epson.   What I expected no help. Since it works ok with PSE10, PSE 9, CS5 it could not be their problem.
However PSE 11 have changed something in the sequence of events.
I then downloaded a trial version of Lightroom 4.   no problem everything works.
I have been offered a refund for PSE11.     That is not encourageing. Does that mean wait for PSE12?????
I developed a bypass - every time I start up PSE11 I just print a dummy image thumb nail size.   then go on to regular printing and all works.
original discussion
Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

Update --PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11
1. page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2. options select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again. Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

Hp Printer 4500 networked not working correctly after 7 to 8.1 migration

After swiiching over to a new hp computer running 8.1 from old hp runing 7. The hp envy 4500 network printer fails when doing multiple pages. It prints about 1 ot 2 pages then dies on a partial page. Have installed and reinstaled envy software on pc and first from disk hten hp website. any ideas

You did load the full featured software and drivers for 8.1 right????

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Print queue does not work

Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
5) Also the verification of the temporary files find no problems.
In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

Officejet 6600 shut down while printing and will not turn back on

I was printing a few documents on my printer and everythign was working fine, then there was a loud click and the touch screen turned blue and the printer shut down. I could not power it back up using the power button, so I tried unplugging it and re-plugging it and it did not work. I have the device plugged into a surge protector so I plugged it into the wall and it still did not work. (Note: all other devices on surge protector were able to get power, so it was not that). I do not know what to do. I need the printer for business and school ASAP and the product is still under warrenty. The warrenty ends September this year (I believe). I would like to bring it into the store if I can and exchange it, but I do not have the box. I do not know if there is something HP can give me to be able to return the product to Staples, or how long it will take to go through HP for the warrenty, but again, I need this printer ASAP and all of the troubleshooting I've done so far has not helped. This is not the first time the printer has shut down while printing more than one document, however this is the first time it has not been able to turn back on either by pressing the power button or unplugging it and replugging it back in. Any help would be great!

Hi @Stacki
I don't know what Staples return policy is. I suggest calling us so we can help.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Printer Assistant is not working ...keeps loading...

Hello, I have purchased a HP Officejet Pro 6830 All in One printer and have installed the software from the CD, installed updates and already used the HP Docter software but the Printer Assistant does not load. It keeps on with a blank screen, with the message that the Assistant is loading and Default Text message (see screenshot) it is just that, My system is Win 7 professional and compuer is Asus. The printer and scanner are working but the Printer Assistant software does not work. My previous printer was also an all in one from HP and it had HP solution Center to manage the printer and scanning process but reading the forum I understand that is not a solution for this problem.

Hi,
Although the issue seems different, try following this document and install the included patch, then check if you may able to load the HP Printer Assistant again:
http://support.hp.com/us-en/document/c03640384
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????

Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj

Finger Print Scanner is not working after downloading new SimplePass

I upgraded my laptop ENVY dv6 to windows 8.1 and downloaded the compatible simplepass. I installed it and tried to start using it. When i had to swipe my finger for it to register my fingerprint and start using it, the finger scanner is not turning on and is not working.
How do i fix this?
Thank You

my finger print scanner is also not working and detecting the sensor also... can u people suggest to solve my problem.
best regards
karim

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

GUI JAVA 7.20 rev.2 (on Mac OSX 10.6.3): Print preview does not work!

I've just started using rev 2 of java sapgui and print preview is not working anymore.
Client: OSX 10.6.3
SAP: ERP5.0 on WAS 640
Has anyone experienced the same problem?

This is the output in console when print-previewing:
I'm going to open a support message as adviced.
<code>
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]     Exception in thread "Loader for htmlViewer8_XZ_7" java.lang.NullPointerException
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.updateColors(FrogListUI.java:63)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.propertyChange(FrogListUI.java:48)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:318)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.awt.Component.firePropertyChange(Component.java:8233)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.firePropertyChange(JComponent.java:4428)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.setEnabled(JComponent.java:2638)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.setEnabled(ActionsPanel.java:418)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.<init>(ActionsPanel.java:106)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.setGUI(AnnotationPanel.java:128)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.<init>(AnnotationPanel.java:73)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildAnnotationPanel(SwingViewBuilder.java:1574)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityTabbedPane(SwingViewBuilder.java:1541)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityAndDocumentSplitPane(SwingViewBuilder.java:1501)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildContents(SwingViewBuilder.java:499)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildViewerPanel(SwingViewBuilder.java:482)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.pilots.pdf.ThePilot.createComponent(ThePilot.java:149)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.setPilot(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.append(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_clear_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_render_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.runAsynchronousLoad(VCDO)
</code>
Edited by: Lorenzo Nicora on May 4, 2010 10:52 AM

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly

Similar Messages

Maybe you are looking for