PSE 11 not installable - rollback @ common technologies installing

Have had the pretty idea to change from my old graphic-suite to PS, so wanted to checkout PSE 11 first and started downloading the Trial Version with the Intention to purchase it after installing, maybe also an upgrade to PS CS6, if I would succeed.
But no Chance, installing up to the organizer went fine, at the end of this, there came up the message about a Problem with the common Technologies.... - as well known in the Forum. So I checked out all "Solutions" (there was no one to find, which resolves the Problem at the root and in general....) - nothing worked. The problems and time wastings are even enough posted here in the forum and no contribution from Adobe.....So I went to ask at the Chat-Support, what was the greatest disappointment: Despite I posted my intention to buy (money, money!!!!) one or two products, I got advised, for trial-products there is no support. Despite I argued if I cannot install even the trial version, I can expect it will be the same with the purchased one - and why I should buy this if I know it is uninstallable? The ADOBE chat Partner closed the chat. So I am standing here, no chance to get installed PSE 11.
- Is there no knowledge how to solve this problem, what is not only mine?
General info: Dell XPS 420, Intel Core 2 Quad CPU Q6000 @2,4 GHz, 4(3,...) GB Memory, Win 7 Ultimate 32b, Grafic: AMD Radeon 7850, 3 HDD (500,500,1000 MB)

Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
If your iussues persist, you need to explain better what solutions you actually tried and what else you may have doen to remedy the problem(s).
Mylenium

Similar Messages

Is there a download of software (not installer) as we are installing on machines with no connection to internet.

Is there a way to download firefox to a USB without the installer so I can install it on several PCs?
We are using Oracle Forms in house. No internet connection as it is secure from outside.
Internet Explorer is not working well, so we want to try Firefox.

It is usually best to use the full installer on Windows to make sure that necessary registry keys get created.
You can find the full version of the latest Firefox 22.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
You can copy the installer to an USB stick and use that to install the program.

Why Toshiba notebooks are not delivered with the common Vista install CD

Our household now has two x Toshiba laptops, both of which were supplied with MS Vista Home Premium pre-installed.
The nature of the Recovery Media provided with these machines is such that (a) we do not have sufficient flexibility over volume/partition sizes, program locations etc., and, more specifically.
It makes it necessary for the majority of the bundled software (Norton Security etc.,) to be installed by default in the event of a system failure. (And immediately uninstalled following recovery! An unnecessary waste of time.)
Bearing in mind that a proportion of the price paid for each laptop must have included a cost for the Vista Operating System, does anyone know if it is possible to obtain a Master Recovery disk which ONLY consists of the operating system, and which allows us the flexibility of configuration which used to be available when the OS was purchased as a separate product.
Additionally, please let me know if it is possible to purchase Toshiba laptops as a RAW machine, i.e no OS supplied, and I will then buy my own and cut out the rubbish which is supplied on the pre-installed media.

>Why Toshiba notebooks are not delivered with the common Vista install CD?
The answer is very simple: software is bundled to hardware and when you buy notebook you buy license for preinstalled Vista version and you can install recovery media so often you want and it belongs JUST to your notebook model. It cannot be used with other notebook or PCs.
If you get usual Vista installations DVD it can be installed on each computer system. For such purposes you must buy Microsoft installations DVD.
As you already wrote Toshiba recovery image contains much software that can be not useful for you. You can remove it from the system and nobody force you to use them. I do the same.
After clean OS installation the first thing I do is to remove or software I don't need or I don't like.
I optimise preinstalled OS on my own.

Trying to re install PSE 11 and keep getting error while installing Shared Technologies

Trying to re install PSE 11 and keep getting error while installing Shared Technologies

Try this link first:
<Install rollback and Shared Technologies | Windows>
It is for the Windows system but if you are using Apple MAC then you'll have to wait until Barbara is here later today.

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). Any ideas why?

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). The program takes only 550 MB. Any ideas why?

Thanks for the clarification on the terms. I consider myself proficent at my computer, but not exactly in its inner-workings! I have 8 GB of memory installed.
I am still confused as to why I do not have any space for the program. This is the exact error message I get: "There is not enough free space on Macintosh HD disk. The Print Shop 2 application requires about 550 MB to be installed. Free some disk space and try again."
Thank you again for your help.

When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried rein

when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried reinstall deleting files signing on with another account etc nothing works I have read this is an apple programing problem if so is there a fix I need iclouds thanks

This other discussion may help: Re: how do I install icloud

I HAVE A NOTE THAT PRE12 STI INSTALLER HAS BEEN SUCCESSFULLY INSTALLED, BUT THIS DOESN'T HELP ME?

I HAVE A NOTE THAT PRE12 STI INSTALLER HAS BEEN SUCCESSFULLY INSTALLED, BUT THIS DOESN'T HELP ME?

What do you need help with?

When trying to install "Kromtech Installer, why will it not go beyond 97.89% installed?

Kromtech Installer seemed to be installing properly but stopped at 97.89% and will not go further. I Rcvd a msg from my PC Windows saying that Kromtech would not install. Do I need to start over? It has been frozen for approximately 30 minutes.

I have never heard of that application before, so I don't have an opinion about it. But based upon this - http://www.howtogeek.com/forum/topic/what-is-pckeeper-is-it-legit - I wouldn't even consider using it.
''Mozilla didn't "recommend" it - that was an advertisement of some sort.''

Why does the installer not open and finish the install after it downloads?

I do not not understand why the downloader will not open and finish the install after it downloads - all I get is more advertising junk trying to sell me things I don't need.

The Adobe Download Assistant. I took a screen shot, and it is just kind of stuck here.

PSE 9 Trial Installation Problems

I recently downloaded PSE 9 and am trying to install the trial version on my computer. I run Windows 7 64 bit, on a Dell Studio XPS, Intel core duo P8700 @2.53 GHz, and 4 GB of RAM. I have more than 150 GB free on my Hard Drive.
I have searched Google and the Adobe forums for a resolution to my problem, but with no luck. The problem is as follows:
I start the downloaded installation program, and get to the screen where you either hit the "install" or "cancel" buttons. Once I click "Install" the dialog box with the status bar comes up, however, from then on absolutely nothing happens. The status bar does not change (even after waiting for more than an hour), the install will not cancel, and any attempt to switch windows, bring up the process dialog box, or any other action leads to a complete system crash. The system does not blue screen, but becomes completely unresponsive. The only way to recover, is to manually switch off the computer by holding down the power button. A manual check of the HD upon restart confirms that PSE did not install at all.
I have cleaned my temp folder, tried installation under a clean boot, uninstalled Dreamweaver, but still no luck.
Any help or insights into this issue would be greatly appreciated. I don't want to buy the full version if I can't even get the trial version to install. Thanks in advance.

Bill and Steve, thank you for taking the time to help me out. I followed both of your recommendations - ran Advanced System Care cleaning out my Junk files and defragging my hard drive, and followed all the steps on the checklist. I also did one additional thing related to problems people have encountered with Windows Installer which I found on another forum:
http://www.dslreports.com/forum/r21766633-Windows-7-Installer-has-stopped-working
The Elements install now starts and the status bar advances. However, when it is approximately 98% complete, it just stops and nothing happens (I waited more than 45 minutes with no change). I was not able to cancel the Setup, could not end the process using the Windows Task manager, and had to forcefully quit the Setup application by restarting the computer. Thankfully, this time I was able to restart using Windows, rather than manually with the power button. Once the system restarted, Elements had not been installed.
Edit:
OK, so I tried the installation again, but this time made the following changes first: In the Microsoft Management Console (accessible from Task Manager -> Services Tab -> Services Button) I manually "Started" Windows Installer and Windows Modules Installer. I also double-checked that all Anti-virus, Firewall (including Windows Firewall), and Anti-malware services were stopped.
These steps have seemed to work and PSE9 has sucessfully installed and also runs (so far)
Message was edited by: skcusesp

Shared technologies install error

Trying to install Photoshop Elements 11 and keep getting the same error message: "The installation process has encountered an error while installing Shared Technologies"

Install rollback and Shared Technologies | Windows

Shared technologies install error with PSE9

I'm having trouble installing PSE 9, it continues to fail the install at the Shared technologies install.
I've already been through the other discusson threads on the forum to see if they could help with the install, so I've turned off AV and Firewall, killed any related Adobe processes, updated AIR to 2.7.1 and set the extract/install point to C:\PSE9 and I'm still failing at the same point.
Having reviewed the log file the Error's are:
- 0 fatal error(s), 5 error(s), 3 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Elements Camera Raw: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - ElementsSTIInstaller: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
The log file references a cache issue.
I've also run Adobe Support Advisor and that wasn't able to help me and effectively sent me here with the following support code: 00-81862-051703092011
Anyone have any ideas of where to go from here?
Any help gratefully received.
Simon

Try this tech note for a solution:
http://kb2.adobe.com/cps/858/cpsid_85843.html#main_Error__Below_mentioned_applications_hav e_failed_to_install__Shared_technologies_

Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm

Dear,
I've had problems with the installation of version 9.0 PL04 (base) when trying to enter the base DemoUS, this system message I get: Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm.
Please someone has an idea how to fix (attached image of the message).

Try this:
1. Check if the SBO-Common database exist. If you cannot find SBO-Common database you must re-install SBO system on the server.
2. If the SBO-Common database exists, then SAP Business One application version is higher than the SBO-Common database version. Perform version upgrade.
Regards,
JC.

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

After updating to windows 8.1 PSE will not load

After updating to windows 8.1 PSE will not load. I have uninstalled and downloaded a PSE and installed several times with no success.

sorry it's not my apple id. it's my icloud email/account. after i updated to ios 8.1.2 my icloud acct on my phone is wrong. it's using my old college email address instead of my current icloud account email. my old college email address *used* to be my apple id, but i changed my apple id to my gmail account a few months back. anyway i can't "sign out" or delete the icloud account bc it thinks my college email address is my icloud account and it keeps asking for the password. so i'll type in the current password for my icloud account and it says it's wrong and i need to retry or change the password, which i've already done twice and nothing changes. probably bc its asking for the password associated with the college email address it thinks is my icloud acct.
i can access icloud on my desktop without a problem... make any sense? do i have to restore my phone now or is there a solution? i've wasted the last 2 days trying to figure this out. i can't send or receive emails on my iphone bc of this. which really ***** for work.

PSE 11 not installable - rollback @ common technologies installing

Similar Messages

Maybe you are looking for