Pse 12 wont open my d750 raw images

I recently upgraded my camera to D750.   My raw images will not open in pse 12.  - Is there a plug in? or do I need to upgrade my software as well?

Which operating system are you using?
Did you try Help>Updates from within the pse 12 editor to get camera raw 8.5, which should then enable both the pse 12 editor and organizer to open those files.

Similar Messages

  • Can PSE 10 open Canon G16 Raw images?

    I am a professional photographer and educator. I have a client who just purchased a Canon G16. He has PSE 10, and he has contracted with me for some tutoring. I want to include editing G16 Raw images.
    However, I wonder if PSE 10 can open G16 Raw images?
    My client's computer is not powerful enough to upgrade to PSE 12.
    I understand that I can have him convert the Canon G16 Raw images to DNG's using the free Adobe converter and import those into PSE 10, but I was hoping that PSE 10 could use the new 8.2 Raw Converter from Adobe that includes the G16, so it could import the images directly.
    Thanks,
    Russ

    The Camera Raw plug-in for PSE10 was last updated in the spring or summer of 2012.  If the G16 is newer than that (it certainly is), then the DNG Converter is the only route. 
    I see on the list of supported cameras, that the G16 was first supported with ACR 8.2, so you’d need the DNG Converter 8.2 or newer (8.3 ATM):
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The DNG Converter is available on the Adobe Updates page:
    http://www.adobe.com/downloads/updates/

  • Has anyone had trouble manipulating Nikon D750 raw image (NEF) in Aperture version 3.6 on Yosemite?

    Has anyone had trouble manipulating Nikon D750 raw image (NEF) in Aperture (version 3.6 500021000000000.3, Digital Camera RAW 6.0 - Build 761.5, Digital Camera RAW support 6000 - Build 136.1)
    I used to be able to manipuplate Nikon Raw (NEF) images from a Nikon D70 and D3200 using Aperture, until the 70 died and the 3200 was stolen about 18 months ago. Recently I did two things: (1) I upgraded OS X to Yosemite and (2) purchased a Nikon D750.  I have successfully imported NEF files from the camera to Aperture, but the images do not render/ cannot be opened/ manipulated. Instead, I see a black thumbnail for each imported image with a cassette recorder play icon in the center of each image. 
    I can view the NEF image in Finder preview mode, either directly when viewing the images on the camera SD card or after exporting the previously imported NEF image from Aperture to my desktop or user folder.  Previously imported NEF image seem unaffected.
    thanks.
    D.

    The current Apple OSX 10.10 Yosemite and the current Aperture version 3.6 do not have support yet for importing Nikon d750 nef/raw files. It usually takes Apple six to eight weeks to release a new digital camera raw update file for new Nikon dslr models. Once that digital camera raw update file is finally released, update your current version of Aperture and that will allow you to import your d750 raw files. In the meantime, you have many workarounds. In my opinion, the easiest is to save images in duplicate nef/raw and jpeg image files to your SD cards.
    And for now, just import the jpegs to Aperture 3.6 from your d750.  Process your jpegs in Aperture - and hope your clients are happy with the jpegs and can wait for later nef/raw image processing. Be sure to save and do not erase your original SD cards that include the nef/raw and jpeg files - then when Aperture finally releases a new digital camera raw file update that includes the d750 - just insert your original camera SD cards into the computer platform and import the old d750 nef/raw files and edit/process them.
    There are many other ways to proceed in the interim as well. You can always import your d750 nef/raw images into Lightroom (if it has been updated to convert the d750 nef files) and process them there. But for the time being, if you can afford to save and hold onto your original SD cards and wait for the inevitable Aperture digital camera raw update, this is a very easy and simple way to proceed.

  • Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

    Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
    I use a lapto (windows 7) 64-Bit operating system.
    Thank you,
    my email is: [email protected], if you send me the answer to my query

    You need to activate Photoshop.
    Mylenium

  • I can not open canon 60d raw images on photoshop CS5.1? can not go to updates either- error?

    I can not open canon 60d raw images on photoshop CS5.1? the same program on stationary mac can open the same raw files, whereas new lap top can not? Why?  can not go to updates either- error, why?

    Which version of mac os x does your new mac have?
    What error do you get when going to Help>Updates in photoshop cs5.1?
    You might try downloading and installing the 6.7 camera raw update from here:
    Adobe - Photoshop : For Macintosh : Camera Raw 6.7 Update
    If you need any other updates, you can find most of them here:
    http://www.adobe.com/downloads/updates.html

  • New install of CS3 won't open NEF (Nikon RAW) images

    New install of CS3 on my new PC laptop won't open NEF (Nikon RAW) images. Same PC product opens them on my older desktop, and CS5 for MAC opens them on my iMAC.
    What am I missing? CS3 has been registered and activated. Thank you

    Hi, Again, John,
    I followed the instructions to the letter, and nothing worked. I still got the wrong kind of file message. After I tried to use the plug-in, I could no longre open pages in IE or Firefox. I have to wipe my new computer and reinstall everything. This time, I made CS3 the first thing I installed, and followed the instruction again as follows:
    "Windows
    ®
    1. Exit Photoshop CS3 and Adobe Bridge.
    2. Open My Computer.
    3. Double-click Local Disk (C:).
    4. Navigate to Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats.
    5. Move the existing Camera Raw.8bi plug-in to anot
    her location (for example, a new folder on your
    desktop). Ensure you keep this version in case you need to revert back.
    6. Copy the Camera Raw plug-in, Camera Raw.8bi, fr
    om the download into the same folder as Step 4.
    7. Launch Photoshop CS3 or Adobe Bridge."
    Still unable to open RAW images in PS. I did notice that the two files I copied to the desktop folder were the same, although one was slightly larger than the other. I chose to keep both.
    Why is CS3 working on my desktop from the same disk with no plu-in, but not on my new laptop? Is it Windows 8.1 instead of XP? That doesn't make much sense. PLEASE help. This is insane.

  • I cannot open Nikon D800 RAW image files in lightoom 2

    I cannot open Nikon D800 RAW image files in lightoom 2.  My raw files will not import into lightroom (it imports jpegs, but not the RAW files) I am using Lightroom 2, version 2.7, camera Raw 5.7. Can you help?

    I would highly recommend upgrading to Lightroom 4 as the processing engine is a quantum leap ahead from Lr 2 just as your camera is a leap ahead!!
    p.s.  you can upgrade directly fro 2 to 4.

  • Cannot open Lumix FZ70 RAW images

    I upgraded to Elements 12 last week to open my Lumix FZ70 RAW images but it says that my images have an unrecognized format.  Documentation suggests that the FZ70 is supported in Camera Raw but it don't work for mine.
    One of your web pages (http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html) lists the file extension for the FZ 70 as .RAW but that is incorrect: the actual extension is .RW2.  It may be that the Camera Raw sees the model number and expects a .RAW format and when is sees the RW2 extension it stops.  As you can see in the table, Camera Raw does support .RW2 format for other Panasonic Lumix cameras.
    It doesn't seem to be a problem on my end. Picasa 3 does open the .RW2 files without difficulty so I think my files are properly formatted. 
    Your help is appreciated.

    The linked page says you need ACR 8.2 camera raw plug-in or newer.  What version of the plug-in do you have?  Help / About Plug-ins… / Camera Raw (in the PSE Editor) and Help / Updates… (in the PSE Editor) to update it, if your OS is new enough.  What OS?

  • In Photoshop CS5 why does Camera Raw 6.7 not open a Crw Raw Image?

    I am running Windows XP Pro 32 bit system,with AMD ALthon  2600 processor.When I first installed Photoshop CS5 it would not open at all.After hours on the internet searching for online help from Adobe,L came across a on line chat.They said I needed a update for CS5.I downloaded the update and installed it and Photoshop opened up.Ithought this had solved my problem.Days Later I tried opening some Crw Raw Negatives.They would not open in Bridge or Mini Bridge.So I tried opening the raw image in Photoshop,a box pops up and says photoshop could not complete the task because it was the wrong image type.I have tried to get help in the General discussion forum,so far noyhing has worked.Also I forgot How to get to the online chat site,if anyonehas any ideas or where this site is It would help a lot......Thanks.

    breasons wrote:
    …I have tried to get help in the General discussion forum…
    There is no such forum.  The Forum Lounge is for social interaction or for meaningless chatter.  The Forum Comments forum is to make comments on how the forums operate or ask questions about that.  Perhaps you mean the Photoshop General Discussion forum or the Photoshop Beginners forum?
    In any event, unless you provide full details no one is likely to be able to reply to your questions.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Can't compare Nikon D750 Raw images in version 9.6.1 of iPhoto.

    This is in response to Terence Devlin’s last reply for which their was no provision for a direct reply.
    I just made an interesting discovery. Here’s the story. I have iPhoto Library Manager and have created many libraries using that program. On a hunch I tried comparing photos in several of the libraries. Selecting two or more photos and then clicking Edit did not work in any case. However, with the single exception noted below, the method I have been using for several years did work. This method is to select two or more photos, then right click on one of the photos and click on Edit in iPhoto in the menu that appears.
    So far I am experiencing a problem in comparing only the Raw images I have downloaded from the new Nikon D750 camera that I acquired just last Friday. Per my recent inquiry you advised upgrading from Mavericks to Yosemite and from iPhoto v9.5.1 to v9.6.1 in order to be able to download Raw images from my new D750 to iPhoto. Those upgrades went well. However, it appears that there is a bug in version 9.6.1 of iPhoto in regard to its ability to compare Raw images from the Nikon D750. How do I notify Apple of this problem so that they can fix it? In the meantime do you know of a workaround?

    How do I notify Apple of this problem so that they can fix it?
    Since iPhoto has been dropped by Apple in leu of Photos  there's little hope that they will do any fixing on 9.6.1. However, you can report the bug to Apple via http://www.apple.com/feedback/iphoto.html and hope they'll look into it.

  • Does adobe lightroom open nikon d7100 raw images?

    Does anyone know if any lightroom products can open nikon d7100 raw/nef images?

    Perhaps your confusion stems from the fact that there are a couple of different lists maintained by Adobe which need to be cross-checked against each other.
    List 1
    Starting at http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    the Nikon D7100 has been supported since Camera Raw 7.4 and Lightroom 4.4.
    So Lightroom 4.4 and later versions support it.
    List 2
    However, according to this list http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Adobe Camera Raw (ACR) 7.4 is only compatible with CS6 and later.
    So CS5 is only compatible with Camera Raw up to version 6.7: therefore CS5 will never be able to open D7100 Raw files. You'd have to use the DNG converter first then use CS5.
    So your choices:
    Buy Lightroom 5
    Upgrade CS5 to CS6
    Join the Cloud or the Photoshop Photography Program
    Or stay with CS5. Convert the D7100 Raw files to DNGs using the free DNG converter. Then open the DNGs in CS5.

  • Editing in RAW, computer wont pick up my RAW images onced added on computer.. How do i add that

    I was recently on here and asking how to add a converter to allow my computer to read my RAW images, that worked last time and i was able to shoot in RAW and add to my computer to edit in RAW but now i had to wipe clean so i need to get that program added back to edit in RAw format.. CAn somebody help me please??>

    Dng converter 7.3:
    Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518

  • Unable to open Nikon D750 RAW files in CS6

    Hi all, this is my first time on the forum so please go easy on me!
    I have been running cs6 on an iMac Snow Leopard version up until today and have had no problems opening any raw files from either my Nikon D700 or D4. Today I decided I should update my OS and am now running Yosemite.
    I Did this as my assistant at a recent wedding has provided me with raw files from a Nikon D750 and I was unable to open them or even update the camer raw plugin through snow leopard (I took a 'if it's not broke then dont fix it' approach to software updates!).
    I have now run updates for photoshop through the Help / Updates tabs and these are all up to date.
    I have also updated camer raw / dng converter to version 8.8 which supports the D750.
    however, I am now no longer able to open any raw files through photoshop. I just get a message saying photoshop does not recognise the file type. I cannot even view the thumbnails of the D750 images in finder.
    I Have found the camer raw plugin in my files (through library / Adobe / plugins / cs6 etc.) but this is still detailing a 7.1 version plugin from 2012. I have also found the dng converter version 8.8 in one of the main folders which is different to the existing plugin location although I feel I am out of my depth with this now.
    I am obviously doing something incorrect but I'm not sure what. Any help would be extremely appreciated.
    many thanks.
    Phil

    Hi John,
    I am running Plugin version 7.3.0.71 (dated 2012). I suppose I need to remove this plugin and replace it with the 8.8 version DNG converter do I?
    At the risk of sounding simple, what is the difference between a Camera Raw Plugin and DNG Converter?
    At the moment the Camera Raw plugin is in the following folder: Library / Application Support / Adobe / Plug-Ins / CS6 / File Formats.
    The new 8.8 DNG Converter is located in directly in the Applications folder.
    Yesterday I tried replacing the plugin with the DNG converter in the File Formats folder but this didn't seem to do anything (I deleted the camera raw plugin at the same time).
    Thanks for your reply and I hope the above means something to you.
    Phil

  • Why cant I open all my raw images with adobe camera raw?

    I have PSE 9 and shoot raw.  How can I open all my images in ACR???? Please help!
    Thanks

      Make sure Elements is up to date. Open Full Edit and click Help à Updates
    Or do you have a recent camera model?
     

  • Can't open Cannon CR2 Raw image in Photoshop CS2

    I've tried everything I can think of.
    I downloaded/installed Camera_Raw_5.2 and still can't open any of the 2 DVDs full of images.
    I'm not the best with the technical side of Adobe Products. Can anyone guide me a bit?

    No, not in the application plug-ins folder. It goes in the File Formats folder, starting the path in your Root Level LIBRARY folder.
    <br />
    <br />
    <span style="font-size:1.25em">
    <b>There are explicit, straight and strict instructions on the download page. Follow them to the letter.</b>
    </span>
    <br />
    <br /> Check also the FAQs of the Camera Raw forum.
    <br />
    <br />c
    <a target="new" href="http://www.adobeforums.com/cgi-bin/webx?13@@.3bb6a869">
    <b>
    <u>
    <font color="blue">Adobe Camera Raw Forum [CLICK HERE]</font>
    </u>
    </b>
    </a>
    <br />
    <br /> If still in doubt, post over there and we'll pick it up there.
    <br />
    <br /> You should have only ONE copy of the ACR plug-in, so you have to delete the old one that resides there AND any others you may have put there, such as the incompatible ACR 5.2 you mentioned early.
    <br />
    <br />c This screen shot shows the path for both CS2 and CS3.
    <br />c The red arrows go all the way to the folder for CS3, but you can see the CS2 folder right above that, so you'll be able to figure it out.
    <br />
    <br />c
    <a href="http://www.pixentral.com/show.php?picture=1lRlHcg6UKE7Egu9xihWadHisvlW5o" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1lRlHcg6UKE7Egu9xihWadHisvlW5o_thumb.jpg" border="0" />
    <br />c Click on thumbnail for full-size picture, then scroll horizontally.

Maybe you are looking for