PSE 13 Printing weirdness

Has anyone else experienced this?
I am printing a number of pictures from a folder (Windows 7). I load the photo into PSE 13, and print it. Fine so far. Now I load the next photo into PSE 13, select print, and the preview shows the previous photo! And, in fact, that's what will print.
Both photos show in the column to the left of the preview box, but clicking on the new photo in that column does NOT select it. In fact, the only way to print the correct photo is to use the "remove" function to delete the old one from the column on the left.
Worse, when you get up to printing, say 5 or 6 photos, the problems persists, and even if you delete the old photo(s) when printing the new one, the next time you go back to the printing setup, not only is the wrong photo selected and previewed again, but every photo you've printed shows up in the column on the left even though you've previously deleted them.
Very annoying. Bug? Anyone?

Then I would start by deleting the prefs. Editor preferences>general, click this button and restart the editor:

Similar Messages

LaserJet CP1025NW Color Printer - Weird cranking noise when printing or rotating carousel

Just out the package today, the first time turning on the printer, during all print jobs and when rotating the cartridges, the carousel is making a weird cranking noise coming from the left side of the printer. I understand that this printer does make the winding/power-up sound, but this cranking noise is in addition to the normal sound.
I find this odd because I use the exact same printer at work and it does not make this noise and I am afraid that it is a faulty mechanism within the printer.
I have checked to make sure that I removed all packaging from inside the printer and removed all cartridges and replaced them. I would think that all pieces that need to be removed would be bright orange. Also, the print jobs are not affected by the cranking noise.
Does anyone else have this problem?

Hi saidthegirl
I understand the printer is noisy but will print.
I have included the document for setting up the printer, to take a look at where all the packing material is located.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02469250&tmp_task=setupCategory&cc=us&dlc=en&la...
If the printer is making unusual noise and you are using the toner that shipped with the printer then I would recommend to call HP Tech Support for further assistance to see what other options are available for you.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Address Book envelope printing weirdness

I'm having a strange problem when trying to print envelopes or mailing labels from Address Book. Basically, when I select a contact use cmd-P to print the address, the preview in the LH side of the Print dialog looks fine. But if I print, or use the "Preview" button, exclamation points are added before and after the State field.
So, "New York NY 12345" becomes "NewYork!NY!12345" in Preview or in the printed output.
If I print to PDF and copy the offending text to a Hex Editor, it appears that the sequence "E2 80 8E" is added just before the spaces (0x20) that separate the fields.
The same addresses synced on another Mac look fine and print fine.
Needless to say, it's driving me nuts! Any ideas?

Hi Waldo,
Just a suggestion...
Have you tried using Disk Utility to Verify and Repair Permissions?
It sure won't hurt anything even if it doesn't fix your problem.
Regards,
John
G5Dual 2Ghz  23" ACD  iSight Mac OS X (10.4.8)  20" Intel iMac 

InDesign CS4 printing weirdness

Hi:
I just upgraded, fairly painlessly, from CS3 to CS4. Following all of the updates, everything is working fine except for my most common print preset in InDesign.
I print short documents on 8.5x11 paper, 2-sided, landscape. No matter how many things I try, ID is printing the pages single-sided landscape. All of the settings are correct for the printer (HP 8100) — it's set for 2-sided and short-edge binding, but my documents simply will not print 2-sided. Interestingly, 11x17 2-sided landscape printing works exactly right.
I can do a workaround by exporting a PDF from ID and printing from Acrobat, but 1) that doesn't solve the problem and 2) printing from Acrobat is a little slower.
Anyone have any ideas?
Thanks,
Gary

In an experiment, I found that letter-sized, 2-sided landscape printing works perfectly from ID CS4 to a Xerox Phaser 6250. Unfortunately, the HP 8100 is my main printer.
Further, wondering if the conversion from CS3 to 4 had something to do with it, I created a new document in ID CS4 and tried to print 2-sided landscape with the same results. It also didn't work printing portrait 2-sided.
I deleted the HP printer, downloaded the latest drivers from HP, reinstalled them, and restarted the computer. At some point, to my shock, I managed to get ID to print correctly — but then it refused to print 2-sided portrait. That was the only time my landscape printing worked.
I've now lost track of how many times I've deleted the printer and reinstalled. If I set the printer up using IPP, it doesn't communicate with the computer for some reason. When I use Line Printer Daemon or HP JetDirect Socket I can print, but the problem still persists. (And still, 11x17 prints 2-sided with no problems.) Also, Word, which I try to avoid whenever I can, prints correctly 2-sided.
I've mainly managed to waste huge amounts of paper and give myself a splitting headache.
There's something up for sure between ID CS4 and HP when dealing with 2-sided letter-sized pages, whatever the orientation.
Gary

Pdf's prints weird in unix

Hi All,
I have a workspace in both windows and unix. The windows workspace produces pdf's just fine, but in unix the same workspace prints pdf's with all section overlapping each other. Is there any setting need to be done.
Thanks.

Porting an environment to Unix involves correcting INI path settings and making sure that all filenames on Unix are lowercase.
If using relative paths and the subdirectory names are identical, then you probably don't have to change any path settings. For example, .\mymrl\myfolder\mydata\myfile.dat will get interpreted as ./mymrl/myfolder/mydata/myfile.dat on Unix.
Try producing PCL output to see if the same overlap issue exists (my guess is it will).
Or you can compare the NAFILE produced on Windows and Unix.
The /NA records will contain the name of the section and the X= and Y= portion will show where the sections are being placed on the page.
My guess is that your Unix NAFILE will have X=0, Y=0 for the sections instead of the coordinates you will see in the Windows NAFILE.

HP 895CSE Prints Weird Characters on 1st Page per Print Job

My printing always prints one line of characters on the 1st page, followed by the correct document on the second. When I had the previous operating system, no problem like this occurred. I have reinstalled the printer driver for OS 10.5, still same result. Any suggestions?

My printing always prints one line of characters on the 1st page, followed by the correct document on the second. When I had the previous operating system, no problem like this occurred. I have reinstalled the printer driver for OS 10.5, still same result. Any suggestions?

Printing weirdness

Anyone know why a printer deployed by GPO would work fine for some
machines that have it and give an error and not print for others?
The error is one that indicates a faulty/incorrect/bad driver, but like
I said, other people can print to this printer just fine.
Stevo

in the meantime this might help you out
on the client machine with the problem, open control panel and go to admin tools - print management and expand print servers where you should see the local machine
remove the drive for the problem printer from the local machine, then remove the connection to the printer and readd it
i've had similar issues with printers not working on machine even with iprint until I remove the driver from the local print server driver store and reconnect to it

Nightmare on Printing Weirdness

Servers 2x NW6SP5e
Clients WIN2kSP4 running Novell Clients 4.90SP2
We currently run a number of different NDS Que based printers . We keep
having this periodic nightmare, rougly every 8 hours or so.
The clients state the the printers are saying unable to connect to server
and are unavailable. Rebooting the computers does not fix the problem. This
happens sporadically to one user and the precipitates to the reminder of the
user population accessing those queues and the only way that seems to fix
the problem is to reboot the server, then the
clients are fine, though a small handful sometimes need to be rebooted. I
have had a look at the error logs which dont show anything etc on the server
and whilst the problem is happening there seems to be no problems on the
server end. Though rebooting the servers fixes the problem. HELLPPPPPPP!!!

Nathan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

PSE 8 does not print to one of my printers

I have two printers connected to my PC but PSE prints to only one of them (which I'll call printer "A"). When in PSE I go to File > Print, both printers are listed in the Select Printer drop down box.
If I attempt to print to printer "B", the small "Printing" dialog appears briefly but nothing else happens (i.e. no error dialog, nothing in the print queue) the first three times. But if I attempt to print a fourth time, I get an error dialog that says "Before you can perform printer-related tasks..., you need to install a printer."
All other applications can print to both printers.
Any suggestions?

Do you have the latest driver for printer "B"?
When attempting to print from Editor, in the dialog, #2Printer Settings>Change Settings>Advances Settings ----- do you see printer"B"?

How Do I Set Print Quality in PSE 10 to above 720 DPI?

Hello Everyone,
I am trying to print a 4888px x 3456px (A4 aspect ratio) to an A4 sheet from an Epson SC-P600 inkjet printer.
In the PSE 10 Print Dialog Box I have set PSE to Manage Colours and selected my printer ICC profile. From the Print Dialog Box's "More Options" window I click Printer Preferences and set the Print Driver's Print Quality to SuperPhoto 5760dpi x 1440dpi.
After clicking OK a few times to get back to the PSE10 Print Dialog Box, I see 720 DPI as the Print Quality value at Item 2 - Printer Settings on the right hand side of the PSE print dialog box. Even if I change the printer driver's print quality to 1440dpi x 1440 dpi, the print quality value remains at 720 DPI at item 2 in the PSE print dialog box.
I expected to see a value of either 1440 DPI or 5760 DPI values in the PSE print dialog box after setting the print quality in the printer driver.
How can I tell the PSE10 print dialog box that my printer is set to 1440dpi, or higher, or will the printer still print at the the printer driver's setting regardless of the DPI value in the PSE print dialog box?

save your settings as a preset... after you click print and change your settings... click on the Presets drop down and save as... it defaults to the last used preset provided you saved your changes.

Print Quality Officejet L7555

I'd appreciate any helpful suggestions anyone can offer. I've had this printer for several months, and it's been terrific. All of a sudden, the colors are garish, greens too bright, blacks part greenish brown, browns orange, just all messed up. Pinks and purples seem okay. I thought maybe it was because I was using non OEM inks. So today I spent $100 on new HP brand ink, and the problem is still there.
On another note, the default printing seems to be stuck on mirror image on, and I keep changing it to off in every profile I have saved, except General Everyday Printing, which I cannot delete or edit. And this is annoying. Every time I want to print, I have to go in and change the mirror image to off because it comes up as on.
I have plain paper selected, normal quality, and am printing on a high-end color inkjet paper with the proper side up. But I've tried varying the settings for quality, paper type, adjusting the ink saturation and brightness. I've also printed on card stock and photo paper with the same result. I've fiddled with just about everything I can fiddle with, to no avail.
Does anyone know if it might help if I reloaded drivers/software? Might I need to replace printheads that are less than a year old?
Thanks for any advice you can give. I'm totally frustrated by this now.

Thanks for the reply, DexterM. I have used the clean printhead utility from both the printer and the HP Solution Center toolbox. Curiously, color copies are perfect. Printing from an image scanned on the Officejet are coming out perfectly. The only thing that's printing weird is photos or pictures from .jpg or other graphics-format files. My black/yellow printhead does have a "monitor" yellow-light status. According to the Extended Self Test Report, I had a total page count of 1446. It doesn't seem like the printhead ought to wear out from that many.
Incidentally, while using the replacement non-HP inks, which are supposed to be fully compatible, I was able to print pictures very well. This is a very recent problem.
It seems as though the colors are getting scrambled somehow in the interpretation from the picture files. If the printheads were damaged, it seems like a copy wouldn't come out just right. Any clues as to what might be causing this? I changed the print processor from the hp one to WinPrint, just to see if that made a difference, but changed it back because it seems to be the same.
Anyway, thanks for your help.
Any clue how I can get the mirror thing to off on the Gen. Everyday Printing shortcut setting? That's so weird. Thanks in advance.
Irene

How to improve print quality from PSE9 on Mac?

Is there a combination of various options in the Photoshop Elements 9’ and the HP Photosmart (C7180) printer’s dialogue boxes (on a Mac, OS 16) that would result in acceptable photo prints? I’ve browsed around in both the corresponding HP and the Adobe forums and found numerous inquiries with similar problems. Thus, this issue may impact larger audience. Therefore, I am describing my problem in more details below with the hope that someone will offer a satisfactory resolution:
I’ve used earlier versions of Photoshop Elements in a Windows environment to print photos on my HP printer – with quite good results. I wanted to improve quality, so I bought a Mac (after all, “Mac’s forte is graphics, photos, etc.”, isn’t it?) and also upgraded to Photoshop Element 9. Well, to say that the result is a disappointment would be a great understatement. I’ve wasted countless hours, ink and paper in trying different PSE - printer options combinations. The prints are not even close to the quality that I used to get with my earlier setup. Is it possible that a conflict exists between the PSE’s and the printer’s Color Management?
In my earlier setup (under Windows), there was an explicit option to turn Color Management off if I wanted PSE to manage colors (which I still want). In the Mac version of the printer menu I do not find this option (although PSE 9 still gives a warning: "Did you remember to disable color management in the printer preference dialog?"). In the PSE 9 print dialogue box (under “Color Management” – “Color Handling” in “More Options…”), there are three options: “Printer Manages Color”, “Photoshop Elements Manages Colors” and “No Color Management”. In the printer’s dialogue box, there are only two options: “ColorSync” and “Vendor Matching”. There is no “Printer Color Management off” – as it was under Windows setup. Anyway, these options seem to be irrelevant, because they are predefined in accordance with selections in PSE. If either the second or third options is selected in PSE, the “ColorSync” button is preselected in the grayed out Printer dialogue box. If the first option (“Printer Manages Color”) selected, the “Vendor Matching” is preselected in the grayed out HP Printer dialogue box. Of course, I do NOT want the printer to manage color.
Thus, is there any way to turn of the printer’s color management if I want Photoshop Element to manage color? Is it necessary (or “ColorSync” automatically takes care of that)?
Anyway, this is all very confusing. The bottom line is: Is there a combination of various options in the PSE9’s and the HP Photosmart printer’s dialogue boxes (on a Mac OS 16) that would result in acceptable photo prints? What would be this combination?
Any help would be greatly appreciated!

Hello
I wonder if you ever solved this problem.
I have a very similar problem with Photoshop CS5 on Mac OSX 10.6 + HP Photosmart C7180.
If I choose "Photoshop Manages Colors" the results are lousy.
If I choose "Printer Manages Colors" the results are OK. not necessarily great.
I believe I have all the correct settings after going through books and web advice (and wasted a lot of paper and ink).
As far as I can see, "ColorSync" is the internal Mac management which is the only option available with "Photoshop Manages Colors" and "Vendor Matching" appears to mean the printer vendor (ie HP) will provide the matching. Either can be selected if "Printer Manages Colors" is used. It seems the type of paper can be set in three different places. if That's all a bit academic as the results are poor regardless.
My wife suggests I buy a new printer - Epson's looking good.
Any words of wisdom would be appreciated.

Printing Multiple Copies of Same Image on Multiple Pages

I have Photoshop Elements 11 on a Windows 8 platform. I can NOT get it to print multiple copies of the same file on multiple pages. I need one file printed on one page multiple times. I have tried the CTRL-ALT-SHIFT and nothing changes. It still just prints one and is done.
I use this for label printing, so I need it to print more than one copy at a time. It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements. This just is not going to work when you need to print a few hundred copies at a time.

You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

How to print Chinese character in java

Hi All,
I have a problem .
I am trying to read a file which contains chinese characters and the print the content of this file to the printer.
But when the content of the file is being printed, it is printing weird characters and not chinese characters. Can anyone please help.
Plese find below, my code.
import java.io.*;
import java.lang.*;
import java.io.BufferedInputStream;
class FileRead{
//--------------------------------------------------< main >--------//
public static void main (String[] args) {
FileRead t = new FileRead();
t.readMyFile();
//--------------------------------------------< readMyFile >--------//
void readMyFile() {
String record = null;
int recCount = 0;
try {
FileReader fr = new FileReader("amaebisushi.GB.TXT");
FileOutputStream os = new FileOutputStream("\\\\ps_apex_1\\ps_lpt1");
BufferedReader br = new BufferedReader(fr);
PrintStream ps2 = new PrintStream(os);
record = new String();
while ((record = br.readLine()) != null) {
recCount++;
System.out.println(recCount + ": " + record);
ps2.println(recCount + ": " + record);
} catch (IOException e) {
// catch possible io errors from readLine()
System.out.println("Uh oh, got an IOException error!");
e.printStackTrace();
} // end of readMyFile()
} // end of class

Try not to rely upon the default encoding, but define it explicitly.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

PSE 13 Printing weirdness

Similar Messages

Maybe you are looking for