PSE 2.0 Stalls on installation

When I try to install PSE 2.0 on my WIndows XP Home it stalls. The hour glass appears for 10 seconds then goes away. The program was installed on this computer, but I had to replace the hard drive, now PSE 2.0 won't reinstall. Can anyone out there help.
Thanks

Hi Rick,
There seems to be some issue with the installer. Can you share what does that log file says? The installer log file can be located in %temp% folder with the name like MSIxxxxx.log.
If you are enable to find it, then you may need to enable the windows installer logging explicitly. Following link might help you:
http://support.microsoft.com/kb/223300
Best Luck,
Ankush

Similar Messages

IMac stalls during installation

I have a 17" iMac G5 that just recently started stalling during installation. The computer acts as if it is loading up the OS, but takes forever - somewhere in the neighborhood of 20 minutes. It has in fact eventually made it to the desktop. However, once you restart, it's back to doing the same thing.
I tried starting up from the MAC OS CD by holding down the "C" key, and now the computer just sits, and the icon spins and it has my CD in there.
Has anyone else experienced this problem and what did you do about it? Also, how do I now eject the CD from the computer?

1. What were you installing? Be very clear.
2. Where did you get the OS X installer disk? Is it a retail version of 10.4?

The latest Adobe Flash Update for Mac OS stalls on installation at 30% download

The latest Adobe Flash Update for Mac OS stalls on installation at 30% download.
How do I delete my old flash from my mac to attempt clean install?
Any other ideas on how to solve this problem?

Please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Problems loading updates for PSE/PRE 9 after re-installation

Hi
After having upgraded Windows 8.1 to 64 bit (earlier 32 bit) I re-installed both PSE 9 and PRE 9 and registered both of them
Next step was to download PSE/PRE updates (packages available for both products) but that ends with error messages
Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later.
Premiere Elements 9.0.1 Updater
There was an error downloading this update. Please quit and try again later.
I quit and came back later - several times - yesterday and today - but no chance to load the updates.
I really need the updates at least for Camera Raw 6.5 which refuses to open CR2 files from a Canon EOS 60D
My guess was that it could have to do with missing deactivation of my previous installation (meanwhile fixed, by booting into 32bit Windows 8.1 - still available on another partition, deactivating and removing both PRE and PSE).
So I was in contact with Adobe Support via chat in case my serials had to be unlocked but they just replied that I would have received another error message and that I shall contact the forum for older products like PSE9
But they also stated that the updates are available @Adobe, no known system problems.
I hope you have a better answer.
Thank you for helping!
Br
Bernd
PS:
System Config: i5 3.2 GHz, 12 GB RAM, Windows 8.1 x64 t (new installed), NVidia GeForce GT520, latest driver
Main Adobe products in use: Lightroom 5.6 (x64), PSE 9 & PRE 9
Internet Connection: Fibre 100 Mbits up/down (this cannot be the reason )

It's an issue on adobes side.
The easiest thing to do is download and install the updates from here:
photoshop elements 9
Adobe - Photoshop Elements : For Windows
premiere elements 9
Adobe - Premiere Elements : For Windows

Adobe flash stalls during installation

Hi all.
My computer:
Late 2012 Mac Mini
2.6gb i7
8GB of Ram
Yosemite 10.10.2
Trying to download Adobe Flash 10.0.0.305
Error: Install of Flash stalls at 30% complete
Process followed:
1) From Get.Adobe.Com, do not select optional offer.
2) Click Install (Program Downloads)
3) Double-Click the Flash disk icon on my desktop
4) Double click on the Installer file
5) Click on 'Open' on the warning about downloading a file from the internet
6) Enter my desktop password on prompt, allowing changes to my system
7) Select 'Notify me' from Flash Player Update Preferences screen
8) And click 'Next' to begin install
9) Install screen comes up, the progress bar gets to 30% and says "Downloading" then stalls.
Thats all the farther it gets. It stalled there for 12 hours yesterday.
Any ideas?

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

Bridge CC stalling on installation?

Hi everybody. I have recently begun subscription to the Creative Cloud. I have downloaded and installed Photoshop CC however when attempting to install Bridge CC, the installation/download is stalling at 42%. I have quit and retried to download/install with the same issue. Are there any known issues with this?

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Can't backup PSE 5 - recovery stalls at 66%

I haven't backed up my catalogue in several months (I know - I'm bad...!) I reconnected missing pics, and then it started the Recovery - and stalled at 66%. I've read that it might look stall at 33 or 66%, and that it might take some time - but the entire program stops responding, and I cant do anything. The bottom task bar on my computer disappears, and I can't minimize the program or anything. I'm running XP.
Help! I've bought PSE 8 to upgrade, but can't do it if I can't get this catalogue backed up. (And I have not installed it yet - PSE 5 is the only program currently on my puter...)
Thanks!

If it is large catalog it takes some time to restore. Even though it seems stalls at 66 %, it would progress further. Please wait for some time and let it completed.

Problem Installing PSE 8.0 - says Another Installation is in progress

I just purchased a brand new CD version of Photoshop Elements 8.0 for Windows. When I run the installation process, I get past the "enter Serial # screen, and I start the Installation and it comes up with an error message saying "Error 1500. Another Installation is in progress. You must complete that installation before continuing this one". I don't have another installation in progress, any idea what I need to do? This is the 2nd one today, the first one was a Mac version that I had to return to the store for a Windows version, but it never started installing. Please help!

Hi Dana,
Right click of your Taskbar at the bottom of the screen, Launch Task Manager, Check the option to "Show processes from all users" and check another instance of Setup.exe or Installer or msiexec.exe already running on the machine. If yes, then End that process and then try to install PSE again.
Sometimes, this error is also seen when windows is installing the updates silently without we knowing about it, or if there is some updates getting installed for some other application installed on your machine?
You may even try to restart the machine and then give it a try?
Keep us informed,
Regards,
Ankush

Stalled OID installation

Hi All,
I am installing OID 10.1.4 on a Red Hat Linux server. The server already has Oracle DB 11.2 and OAS 10 running. During the OID installation, the installation stopped at Configuration Assistant's - Oracle Database Configuration Assistant and stay there for hours without progressing. Checked the oradata directory and can't see any dbfs or any files being created there. The only message from the shell which started the installer is 'opmnctl: opmn is already running'.
Has anyone seen that before?
Thanks

Eh no, I was referring to the installation that complained about opmn already being started. At that point, you might try stopall, or startall (depending on what the actual status is).
Normally, this should not stall - I have seen this warning before, and it never actually stops the installation process.
However, at some stage the process tries to figure out what ports are being used, and it runs some hideous perl/java code. Just be patient when you find out netstat is running.
Are you actually installing now?
Cheers, Frank

Stalls on installation

I'm having some major issues at present. I restarted my Mac last night to see the dreaded No Entry symbol. I can start up from my backup drive and see contents of my Mac but can only copy some of them over.
I have done the following:
Repaired Disk Permission: Nothing found
Repaired Disk: Nothing found
Ran Hardware test (advanced): Nothing found
I then tried to Archive and Install but it seems to stall when installing the system. It gets around a third of the way and then my drive makes clicky sounds and will install no more.
I only really wanted to run the Archive and Install rather than a full installation because I have some files that haven't been backed up. To be honest I'm not sure that would work anyway.
Does anyone have any ideas? Thanks.

I've tried running Disk Warrior but that just stalls as well after a while (I think whilst it's trying to scan the faulty drive) and then I get the spinning kaleidoscope of death

PSE 9...exceed installation limit...

I have owned PSE9 for over a year and it is installed on two computers only. It has never been installed on any other computer other than the two at present. Out of the blue and a year after the initial installations it now tells me I have exceeded the installation limit of two computers and must now deactivate one or but another license. Again, it is installed on ONLY two computers and NOTHING has changed since the original install other than the normal Adobe updates. Furthermore, deactivate is greyed out and is not even an option on one of the two installations.
Any and all feedback is appreciated.

The message should have given you a way to contact adobe and you will need them to straighten this out for you.

MacBook Pro stalls during installation of update

After restart, shows "installing 3 items". Progress bar moved quickly to just shy of half and is now stalled. It has been like this for 4 hours even though it says time remaining is less than one minute. Help!

http://support.apple.com/kb/DL1676

Itunes 8 stalls during installation

If anyone can assist,
I recently tried downloading the latest itunes software from this website and it will never complete. I am not getting an error message it just stops processing all together around 56%. I have been using a zune and their marketplace for sometime. Oddly enough i had the same issue downloading the marketplace software and had to have MS send me a disc for the installation. I want to buy a ipod classic but before I did I was trying to download the software and give it a test run.
I am a little reluctant now because I am having so much difficulty. I was worried about my system settings and extra junk on my computer so I wiped it clean and rebooted putting it back to the way it was the day I purchased it. I had not done this in years so I was assuming any problems I was experiencing would be cleared up this way.
Unfortunately I still cannot download the Itunes software. Anyone have suggestions as to what i am doing wrong.
Thank you.

Thank you for the response,
Yes I tried downloading from the website : http://www.apple.com/itunes/download/
I was trying to just run from the download at first but then I also tried saving to my desktop as you suggested. It times out a little farther down the way at 67% percent when i do this. Keep in mind my system was fully updated when I originally had the problem. All drivers from dell website....and all windows updates. I had installed windows sp 3 prior to rebooting my system all togehter.
I believe you are right in that it is a more general problem than itunes since i had the same issues with the zune marketplace.
The system is fully updated now, no cookies, pop up blocker is off. I am not sure what a web accelerator is to know if I ever had one running.
I also don't know of any alternate web browsers to download from. I am also going to check the dell forum to see if i can get some assistance. Thank you for trying. If anyone else has a suggestion please feel free to let me know.
Thank you.
Message was edited by: bettergetdave

PSE 12 startet nicht nach Installation

PSE 12 startet nicht nach Installation

Hi Cluadio,
Welcome to Adobe Forum,
I would request you to refer to :
http://forums.adobe.com/message/5932711
http://forums.adobe.com/message/6030445
In case the issue is still not resolved, please contact Adobe at http://adobe.ly/yxj0t6.
Regards,
Rajshree

Cannot launch PSE 6 for Mac after installation - HELP!!!

I just installed PSE 6.0 for Mac on my new iMac (I'm using OS X 10.5.8), and it installed successfully (at least it appeared to). My first problem was that it did not allow me to register the serial number. That's probably no big deal, but then when I went to start the application, the main window came up, but it did not let me do anything, not even EXIT (it was grayed-out). I shutdown and restarted, but this didn't change anything. I thought PSE 6.0 for Mac would work with OS X 10.5.8? Not sure what's going on here. And why aren't there any error messages telling me what's wrong??? I'm on hold right now to Adobe, but nobody is answering. Very frustrating ...

I just did a 'verify permissions' and it returned 117 messages that said "permissions differ on ... ". Then I did a 'permissions repair', but it did not seem to repair anything because the same "permissions differ on ... " messages came back. It also said "Permissions repair complete", so I don't really know what that means (successful or not??). Below are two examples of the 'error' messages:
1) Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2) Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resources/DotMac SyncHelper.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
What does the permission "l" mean in #1?
Most of the returned messages are similar to #2 ( ... should be ? ---- ...). Not sure if this is okay.

PSE 2.0 Stalls on installation

Similar Messages

Maybe you are looking for