PSE 4.0 Compatibility with CS3?

Simple question from a newbie. . .
Are .psd files from CS3 downward comaptible with PSE 4.0?

You might want to insure that the PSD files saved in CS3 are saved with "Maximize PSD file Compatibility" turned on in the preferences. I'd think you'd want that particular preference turned on to be on the safe side. Hopefully, Barbara or someone who knows for sure will have something to say about whether that particular preference needs to be on.

Similar Messages

  • SPRY 1.5 pre-release compatibility with CS3

    Hi all
    Does anyone know if SPRY pre-release v 1.5 will be
    backward-compatible with the release version that is integrated
    into Dreamweaver CS3? I'm about to start a project that uses AJAX
    tabs and need to know if the current methods will be editable with
    future versions of Dreamweaver.
    Thanks
    Paul

    Understanding that I work for Adobe and I worked on Spry
    features for DW CS3..
    There isn't anything special about working in DW8 with Spry.
    Your widget will render as exploded markup: easy to see content but
    harder to determine layout. But as HTML and CSS, editing should be
    straightforward.
    But I am spoiled by having widget rendering and Spry code
    coloring and hinting in DWCS3 for many months now.
    Widgets render as they do in the browser and you can
    add/remove tabs and switch between them.
    Spry code hinting, esp with the data stuff, is quite fun.
    But, for now, DW8 will do just fine for you.
    Thanks,
    Don

  • Photoshop Elements 6 compatibility with Mac OS X 10.7 Lion

    Has anyone tested PSE 6's compatibility with Mac OS X Lion?
    Thanks in advance.

    It's Intel based so it should work.

  • Hello I bought Lightbox4 but it was not compatable with XP which was on my computer so I bought Wind

    Hello I bought Lightbox4 but it was not compatable with XP which was on my computer so I bought Windows 7 now it works fine, I also have Photoshop Elelements 11, I was using CS3 which I like very much, I have just tried  tore- download it again and the message I have is that the Installer is corrupt, is there anything I can do? I can not afford to buy it again can you help?

    You can download legacy versions from here:
    Direct Download Links for Adobe Software
    Just make sure you are obeying the correct install order - older versions must be installed before newer stuff, i.e. your CS3 must be installed before LR4 and PSE 11. in fact your corruption error could be just that - the CS3 envcountering stuff it doesn't understand because it is newer than itself.
    Mylenium

  • Photoshop Elements 11 compatibility with Window 8 (64bit)

    The program has been installed three times using various settings including simplified mode.  Windows font size is too small to read to use the software.  Windows compatibility settings were used several times but no change.  Please advise.

    Hi,
    PSE 11 is compatible with Windows 8 and doesn't need any special install actions - I just use the defaults.
    The problem with the font size has been brought up many times before by others.
    It mainly depends on your screen size, resolution and dpi settings whether you can read the font. I have a laptop using Windows 8 with a 15.6" screen set to 1366x768 pixels and a display setting of 100% and I can use PSE quite happily.
    About the only thing you can change is in the organizer where you can tell it to use the system font (Edit -> Preferences -> General). That might help but could make the display untidy.
    The only other thing I can suggest is that you use the Windows 8 Magnify feature.
    Sorry I can't be of much help
    Brian

  • Is elements 8 compatable with camera raw 6.3

    i have a nikon d3100 and i use elements 8 which has camera raw 6.2 and i need camera raw 6.3 but ive heard its not compatable with elements 8, does this mean that the only option i have is to buy elements 9 or 10. cheers

    You have two alternatives:
    (1) Upgrade to PSE 10. (2) Download and install the free Adobe DNG converter to convert your NEF files to the Adobe Raw format and the files will open in all versions of PSE (keep your original NEF’s as backups and for use in Nikon software)
    Windows download click here DNG Converter 7.1
    Mac download click here DNG Converter 7.1
    You can convert a whole folder of NEF images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Problems with CS3 and Leopard

    Having a bit of a nightmare with Indesign and Photoshop CS3 since upgrading to Leopard. Running a Dual 2.5 GHz PowerPC G5 With 2GB DDR SDRAM. Anyone else having problems?

    Below is the Adobe Marketing Line (copied verbatim). It's what I was told by Adobe Sales and what I read at Adobe.com, FAQ, before buying CS3 in October 07. Imagine my surprise when I discovered all of the issues with CS3 and Leopard, even after the update to Acrobat 8.1.2 Professional which promised full compatibility (see chart at bottom).
    Apple and Adobe... ARGH.
    Oh yes, for all of the new suckers out there who are about to buy CS3 for their new Macs, the exact same FAQ is at Adobe.com, even now, Thursday, 12 Jun 2008.
    ADOBE CREATIVE SUTIE 3 Frequently Asked Questions
    Support for Mac OS X Leopard
    Q. Is Mac OS X Leopard (v10.5) important to Creative Suite 3 customers?
    A. Yes, Mac OS X Leopardthe latest version of Apples operating systemdelivers an elegant,
    productive new computing experience for creative professionals. Adobe and Apple have been
    collaborating closely for months to ensure that Adobe Creative Suite® 3 applications can run
    smoothly and reliably on Mac OS X Leopard. We are proud to support this impressive new
    operating system, and to ensure that our creative customers can take full advantage of the
    performance and value of using Creative Suite 3 applications and Mac OS X Leopard on
    Intel-based and PowerPC Macs.
    Q. Are Adobe Creative Suite 3 applications compatible with Mac OS X Leopard (v10.5)? If
    some are not fully compatible today, when will they be compatible?
    A. Thanks to close collaboration between Adobe and Apple, most of the CS3 applications and associated technologies, such as Adobe Bridge CS3, Version Cue CS3, and Device Central CS3, are compatible with Mac OS X Leopard without requiring additional updates. However, the following CS3 applications will require updates for full compatibility with Leopard: Adobe Acrobat 8 Professional and our professional video applications, including Adobe Premiere Pro CS3, After Effects CS3 Professional, Encore CS3, and Soundbooth CS3. We expect to publish free Leopard compatibility updates for the video applications in December 2007 and for Acrobat 8 Professional and Adobe Reader 8 in January 2008. For a complete overview of compatibility between Adobe creative applications and Mac OS X Leopard, see the chart on page 2 of this FAQ.
    Q. Will older versions of Adobe creative softwaresuch as Creative Suite 2 and
    Macromedia Studio 8 softwaresupport Mac OS X Leopard?
    A. While older Adobe applications may install and run on Mac OS X Leopard, they were
    designed, tested, and released to the public several years before this new operating system became available. You may, therefore, experience a variety of installation, stability, and reliability issues for which there is no resolution. Older versions of our creative software will not be updated to support Mac OS X Leopard. For a complete overview of compatibility between Adobe creative applications and Mac OS X Leopard, see the chart on page 2.
    Q. Will Adobe continue to test CS3 applications on Mac OS X Leopard?
    A. Yes. Adobe sets high standards of quality, stability, and reliability for our professional creative
    products, and we have worked closely with Apple to test Creative Suite 3 applications on both pre-release versions and the final shipping version of Mac OS X Leopard. While this testing showed that most CS3 applications perform well on Leopard (and that others run well but need updates for a few identified issues), we recognize that other issues may unexpectedly arise on any new operating system. We plan to continue testing and to monitor user experience closely to address any such issues. If you encounter any issues, please report them by going to www.adobe.com/misc/bugreport.html and clicking Report
    A Bug. Please note that we dont respond to submissions, but we do review them closely with the appropriate CS3 product teams.
    Q. Which CS3 applications will need patches to be compatible with Mac OS X Leopard?
    A. The following table summarizes compatibility between Adobe creative applications and Mac OS X Leopard. It notes which CS3 applications require updates for full Leopard compatibility and when Adobe expects to release those free updates.
    At A Glance: Mac OS X Leopard Compatibility
    ADOBE APPLICATION COMPATIBLE WITH REQUIRES UPDATE NOTES ABOUT
    Mac OS X Leopard For Mac OS X Leopard Compatibility
    Creative Suite 3 Design Premium ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.
    Creative Suite 3 Design Standard ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.
    Creative Suite 3 Web Premium ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.

  • Adobe Elements 9 compatibility with OSX 10.8

    Is Photoshop Elements 9 compatible with OS X 10.8?

    Great news! PSE 11 is such a disappointment -- Elements seems to get dumbed-down, lose features, and lose compatibility with filters every version.  I do have to say, though...I used to love PSE with LR and Bridge but I'm probably going to leave the Adobe family if the prices keep going up and the need for Flash goes down!  Glad I saw this post -- thanks, friends!

  • Problem with CS3 InCopy text files and InDesign CS5

    I have a large annual magazine that I am developing. There is one section that doesn't change much from year to year and I was hoping to grandfather in the InCopy text files from last year's edition. I've successfully used this strategy the past few years without issue. However, now when I try to check out those text files from last year, I receive the following message "This story needs to be coverted to "InCopy Document" format in order to edit it."
    I am running both InDesign CS5 and InCopy CS5 in SL 10.6.4. The previous year's magazine document was in CS3 InDesign format and the text files were in InCopy CS3. Is there some sort of compatibility issue? Is there a specific method for converting them so I can check them out in InDesign? I haven't attempted to check them out in InCopy CS5 yet but I will try that next. But I really need the ability to check out the content via InDesign too.
    Thanks in advance.
    Robert

    AFAIK, you're going to actually need to open the INCX files in InCopy and then resave them as ICML file. You can then relink them all in InDesign.
    Other choice is killing the InCopy links and then relinking everything.
    Best practice would be to finish any job started in CS3 with CS3 and then move to CS5 with new projects.
    Bob

  • (psd) File Compatibility from CS3 to PS-6.1

    Good Day,
    I am hoping that this is as simple as using "maximum compatibility" in CS3.
    I have a collegue who is still hanging on to PS 6.1 (erg!!)  and need to know if I can send him CS3 (psd)s without too much heartache??
    Yeah, I know! Not too much room to complain when I'm still on CS3 I just can't reconcile the cost/benefit offset. Yet!
    Thanks in advance
    Kind Regards,
    Silicon9

    Noel,
    Wow!  You are totally awesome, and 100% correct.
    This post should have stated version 6.0.1, not 6.1 
    Thank you for pointing out the .0 difference.
    Kindest Regards, and good luck with the OCD meds.
    Silicon9

  • HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    Check the Adobe website for compatibility.
    Ciao.

  • Compatibility between CS3 and earlier versions?

    As the web developer I have Contribute version 3, but some of
    my new clients
    will be buying the latest Contribute CS3 to update their site
    pages. Can I
    still set up their roles and editing rights for a site and
    create a
    connection key to send to them that will work for them in
    Contribute CS3
    without difficulty? And can either of us still edit the site
    pages,
    regardless of the fact that we are each using different
    versions of
    Contribute?
    In conclusion, are there any backward compatibility issues I
    should be aware
    of between the newer version and older versions of CS3 when
    administering,
    and connecting to, the same website?
    Thanks in advance.
    (Please reply to forum. E-mail address is bogus to prevent
    spam)

    Thanks for the advice.
    "ThinkInk" <[email protected]> wrote in
    message
    news:f0sa43$dvh$[email protected]..
    >I had the same problem when C4 arrived and I could'nt
    purchase C3 for my
    > clients.
    >
    > The key is to use Transitional Mode (adminstrator
    settings,
    > compatibility),
    > here's wat the HELP says:
    >
    > --------------------------
    > Enabling compatibility with older versions of Contribute
    > Contribute 4 offers administrators two compatibility
    options--one that
    > allows
    > users with earlier versions to work on the website, and
    one that does not:
    >
    > Transition Mode
    > In this mode, users of earlier versions of Contribute
    can continue working
    > on
    > the website, along with Contribute 4 users. This lets
    you evaluate the new
    > version and set up new roles and permissions without
    disrupting users with
    > earlier versions of Contribute.
    >
    > Compatibility Mode
    > In this mode, all users must use Contribute 4. Users
    with earlier versions
    > cannot work on the website.
    >
    > Contribute 4 starts in Transition mode by default when
    you migrate from
    > Contribute 3. Use this mode temporarily; when you?re
    ready, transition all
    > users to Contribute 4 and enable Compatibility Mode.
    >
    > To enable Compatibility Mode:
    > In Contribute 4, select Edit > Administer Websites,
    and then select a
    > website.
    > The Administer Website dialog box appears.
    >
    > Select Compatibility from the category list on the left.
    > The Compatibility options appear in the Administer
    Website dialog box.
    >
    > Select Compatibility, and then click Close.
    > After you enable Compatibility Mode, all users connected
    to the website
    > must
    > use Contribute 4.
    >
    > ------------------------
    >
    > It's really better to upgrade yourself to the newest
    version, so you know
    > what
    > extra options your clients have and you can support
    them. I managed to get
    > both
    > C3 en C4(I purchased the upgrade) running on my PC, so
    maybe that's also
    > an
    > option.
    >
    > grtz. Hayo
    >

  • Windows 8 and itunes 11 compatibility with an ipod

    I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8.  This was months ago.
    I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
    I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
    If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
    Kia
    [email protected]

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Is adobe photoshop cs2 compatable with windows 8?

    Is adobe photoshop CS2 compatable with windows 8?

    I have removed and re-installed CS2 twice now and still get the same library application error.
    DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
    Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
    Thank you,
    Eric

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

Maybe you are looking for

  • Select with IF ELSE statement

    I was wondering if I could have a select statement like this in my cursor: Cursor1 (contactno integer) is select * from customer where customer_id = 100 and if handphone_number is not null then handphone_number = contactno else housephone_number = co

  • Importing imovie project into Final Cut Pro

    Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality. An

  • How do I connect my HP 7 1800 (Mesquite) Tablet to my Canon MP495 wireless printer?

    I have a new HP 7 1800 tablet and want to print to my Canon MP495 wireless printer.  I already have other PC's and laptops using the wireless printing, but don't know how to get my Tablet set up for the wireless printing. Should I direct connect from

  • Advanced Table in OAFramework.

    Hi, I am trying to personalize the advanced table in OAFramework to make sure that atleast one row is mandatory. I.e. i have a button to add a row and then enter the values in that row. I also have a delete button to delete the row. I made the row ma

  • OSB Catalogue Tidy Up

    Hi, My OSB catalogue is growing (currently 14GB), and appears to contain entries from when we first started using the product (16 months ago). We have media family retention periods of around 3 weeks, and I was expecting the older entries to be remov