PSE 4.0 on Mac: cannot run postflight script

Built PSE 4.0 as root on 10.5.6, PPC G5 w/ Mac OS Extended (Case-sensitive Journaled) FS. Near end of build: "file missing" then "cannot run postflight script." Any ideas? Thanks.

Had you tried installing as a regular admin user? In any case, if this drive is also case-sensitive, that's where the problem lies.

Similar Messages

Elements 4.0: run postflight script fails

I ALMOST successfully built Elements 4.0 as root on Mac OS 10.5.6 (CPU PPC G5). Near end of build, I see "missing file" then "cannot run postflight script".
Any ideas? Thanks.

SysAdmInMaine wrote:
Thank you, Ramon. I chose the category "Photoshop on Mac." What do Mac users posting here use?
The full version of Photoshop, as in CS4, CS3, etc. That's why there is a dedicated Photoshop Elements forum elsewhere.

Run postflight script for Plugin - step failed for mac

So when I try and install adobe flash player on my mac OS X version 10.5, I get a message saying "The following install step failed: run postflight script for plugin. Contact the software manufacturer for assistance.

Hello,
Flash Player no longer supports OS X 10.5. The last version to support OS X 10.5 is 10.3.183.90. You can download an archive.dmg file containing this version from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html. After downloading and extracting the files, you'll want to install the file 'flashplayer_10_3r183_90_mac_intel.dmg'.
Maria

Error Message: "Install Step Failed:run postflight script for Plugin" When Flash Player 11.7 instal

Don't See Question/Problem w/Flash Player Installation. Error w/11.7.700.260 Installation had errors (dialogue box) The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance. Please Note: I have read all Adobe Links related to installing Flash Player and uninstalling previous version 10.3 for MAC OS 10.5. So I have MAC OS 10.5.8 w/Firefox Browser 16.0.1 and disabled anti-viral software. Uninstalled previous version of Flash Player 10.3. Confirmed uninstallation. Downloaded Flash Player 11.7.700.260 instead of 10.3.183.90 due to Adobe stated information re:replacement of 10.3 versions with 11.7 extended support. Installation of 84% occurs then the Error Message: Installation had errors (dialogue box) The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance. Please help to resolve this issue as no flash player is currently on my MAC. Thank you so much.

Hi Mike,
First of all, thank you so much for responding and sorry I forgot to mention my CPU; fortunately I **DO** have the 2.6 GHz Intel Core 2 Duo Processor so I could upgrade to Mac OS X Snow Leopard. Two Questions:
1. Do you know whether Snow Leopard sold by Apple is an upgrade or "clean install?" If it's not a clean install, do you know (off-hand) if there are any upgrade issues? I'm very partiall to a clean install.
2. Why does Adobe state (for updating Flash Player 10.3 when Adobe knows that [most likely] the 10.3 versions run on Mac OS 10.5.x? See statement and link below...
Kindest thoughts - Karolynn_1
http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-updated-to-flash-playe r-11-7.html
We’re happy to announce that we are updating the version of our extended support release to Flash Player 11.7 on Mac and Windows. Flash Player 11.7 will replace version 10.3 as the extended support version beginning July 9, 2013.
In order to continue receiving security updates, an upgrade to either Flash Player 11.7, or the standard Flash Player 11.8 release is required.
Flash Player 11.7 provides exciting new features, including Actionscript concurrency, webcam support for StageVideo and more. It also enables Protected Mode for FireFox on Windows, a sophisticated security-in-depth feature. With Protected Mode, Flash Player runs as restricted process, making it more difficult for attackers to build working exploits. Click here to learn more.
Flash Player 11.7 leverages hardware acceleration for audio, video and rendering to increase performance and lower CPU usage.
To ensure the smoothest possible transition, we encourage IT organizations deploying Flash Player 11.7 in managed environments to thoroughly test audio and video playback for critical use-cases using the latest available version before deploying this release widely. When hardware-related playback and stability problems do arise, updating to the latest hardware drivers frequently resolves these issues.As a secondary workaround, the Flash Player Administrator’s Guide details mechanisms for disabling hardware and audio acceleration via mms.cfg.
We have been hard at work to make Flash Player better than ever, and we look forward to continuing to serve you with a great web experience.

Perl problem? Run postflight script

Yesterday my USB mobile internet aircard wouldn't mount in OS X (10.5.6). I spent hours on the phone with the ISP's tech support, and they ultimately had me download and reinstall the software. When I attempted to install that software, it failed with this error message: "The following install step failed: run postflight script for Franklin Wireless".
A few hours later I tried to install a different program (unrelated to the internet issue) and I got the same kind of message "The following install step failed: run postflight script"
I've googled for hours, and there's almost nothing out there. Everything I did find led me to stuff about "perl" and "bash". I'm not exactly new to computers, but I'm not a programmer either and I don't understand any of that.
I don't know what to do here. Is it possible my "perl" is corrupted or missing? Or my "bash"? I checked my software updates and I happened to be due for an upgrade to 10.5.7. So, I did that hoping it might fix anything that was corrupted or missing. But, afterwards I tried the install again and got the same error.
I'm 2,000 miles from home on the second day of a two-week business trip. I need my computer to work, I need the internet access...basically I'm screwed. If ANYONE can offer any insight, I would be eternally grateful.
Thank you.

Check the Console messages and post back anything that looks interesting after getting the postflight error.
Eric
Ps. Doesn't the hotel have internet you can hook to?
Message was edited by: ericmeyers

Error: run postflight script for adobe common files

error: run postflight script for adobe common files

I am sorry can you please restate your inquiry. If you can provide some more details regarding which Adobe Software you are inquiring about? Which operating system are you using? Finally what are you trying to accomplish when you receive this error?

I can't install Komplete Elements. I got the message Install Failed. The following install step failed: Run postflight script Kontakt 5 Content.

When I tried to install the free copy of Komplete Elements that came with my Komplete Audio 6 Interface I got the message : Install failed. The following install step failed :Run postflight script 5 Content. I was able to insall the Audio 6 drivers but didn't choose to load Traktor or Cubase LE because I use Garageband.
I have a Macbook. Running version 10.5.8. GHz Intel Core 2 Duo.
I tried the url their tech support sent me but that didn't work either.
If this is not the right forum please redirect me.

Thanks for answering. The weird part is that I was able to install Audio 6 and record my bass but Elelements won't install at all. When I orginally ordered it the site said that Elements would run on 10.5.8 but I guess you're right. I am going to have someone check it out later today. I'll let you know what happens. If you only want the Audio 6 Interface they sell it for $229 at Music123. I shouldn't complain because Elelements was free but the more I looked into it the more I became interested.. Another strange thing is that I told Komplete tech support I had 10.5.8 and they never told me it wouldn't work.

Cannot run SQL script on Oracle Database 10g Express Edition

I'm trying to upload a script, and the file is being uploaded fine, but in the Script Editor window where I'm going to actually run the script, the entire file content is shown on one line and the whole edit area is in red. I'm not being able to run that script. Also if I create a new script from the editor, the edit area is again in red and I'm not able to save it. Please help me understand what's to be done so that I can run my SQL scripts.

I'd bet the database is down.
Try a login through sqlplus ("Run SQL Command Line" in the Oracle Express Edition 'Start' menu).
Do a CONN / AS SYSDBA
If you get a message about database or memory area not available, try STARTUP.
If that doesn't work, you are best off in the General Database forum or the Express Edition forum.
You'll probably get the most expert response in General Database, but the Express Edition forum can be gentler on newbies (as it is more accepted that questioners are not and do not have access to full-time DBAs).

Cannot run this script in matlab

Hello..
Can anyone help me in running this script in matlab. It is a code in matlab for finding a R transformation.
"letzt_size reduced_2.jpg" is the inlut image we gives. Any image can be used. I tried to put this code in a Mathscript functionnode. Butit is not working. Otherwise this code works in Matlab.
D = imread('letzt_size reduced_2.jpg');
imagesc(D)
imshow(D)
[R,xp] = radon(D,[0 45]);
figure; plot(xp,R(:,1)); title('R_{0^o} (x\prime)')
theta = 0:360;
[R,xp] = radon(D,theta);
imagesc(theta,xp,R);
title('R_{\theta} (X\prime)');
xlabel('\theta (degrees)');
ylabel('X\prime');
set(gca,'XTick',0:20:180);
colormap(hot);
colorbar
save radon R xp -ascii -double -tabs
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************

Hi Nghtcrwir,
the reason is LabVIEW doesnt have "imread" function in Mathscript function node.
You can use LabVIEW help to check which matlab programs are supported by Mathscript function node.
All the Best!
Ritesh

Plsql developer - cannot run a script

Hi,
I have created some scripts to create some tables, triggers and sequences. To run these scripts I have another script which is like:
set echo on
set feedback on
spool <path>
@@ <first script>
@@ <second script>
so on and at the end closed or ended the spool...........
I am trying to run this script in plsql developer but it gives me an error ............. on every statement .......
Can any one help me how do I run this script........

Well the actual scripts (something similar) would have helped.
But since we dont have that let me start with basics
Hope you are running those commands in the COMMAND Window and not sql window?Is that so?
Cheers!!!
Bhushan

Cannot run install script

When I run runInstaller script - it says nothing and nothing happens.
Could anyone please help me

I've got the same problem. I'm using Redhat 7.2 with kernel 2.4.18 and trying to install 8.1.7. When I trace the installer process, I see it looping continously and experiencing repeated segmentation faults.
Sean

Cannot run the script

Unlock-ADAccount | Set-ADAccountPassword -Identity -PassThru -NewPassword (ConvertTo-SecureString -AsPlainText "123456" -force)
when i copy it into powershell it works like a charm... but i wanted it to prompt me for password. and then promt me for the username i want to reset.
i have my MMC for the GUI users and computers interface, the shortcut is like this,
C:\WINDOWS\system32\runas.exe /user:administration\%username%adm "mmc.exe \\servername\Tools\Admin\Administration.msc"

are you looking for Read-host option from Shell?
I haven't tested - but this may give a dice
$id = Read-Host 'Enter SamAccountname'
$pwd = Read-Host 'Enter Password' -AsSecureString
Unlock-ADAccount -Identity $id | Set-ADAccountPassword -Identity -PassThru -NewPassword (ConvertTo-SecureString -AsPlainText $pwd -force)
Regards Chen V [MCTS SharePoint 2010]

Cannot run calc script from Analyzer

I just did an upgrade from 6.5 to 6.5.1 and I am unable to run one calc script on a particular database. I can run other calc scripts, just not this one. I get no error message or anything, I can keep clicking the calc button, but it does not run.Strangely, when I click the calc button, Analyzer puts a text file in the directory \\analyzer\appserver\bin with the user name (ex. gcrisci.txt) When you open this file, it is the calc script from Essbase I was attempting to run.I recall running into a problem like this in the past due to the size of the calc script. I thought the solution was to go into Analyzer.properties file and increase the MaxDataCellLimit values. The default is 50000, I've increased it up to 500000 with no resolution. So, I'm thinking maybe this isn't the fix.Does anyone know of a solution to this problem?Thank you.

John,
Here are the roles that i assigned my user and he can view/launch the calc scripts from Planning Web without actually being an admin( i think)
Analytic Servers : server access
Business Rules: Administrator
Planning App : Interactive User
APS : Provisioning Manager
I would also like to conver the calc script to a BR as suggested, but not sure why i see no users available in the Business Rules-> administration tab.
As indicated above, the use has been provisioned as a BR admin!
Also, i tried refreshing the app with filters, refreshing the user list from BR->admin(right mouse), de-provision and re-provision the user! Any ideas??

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

Securely deploying and using credentials within a script (not running the script under the credentials)

Here is my scenario - I have SCOM 2007 R2 and on certain agents I want to execute a script. One of the actions of that script is to access a secured web page using a username and password via integrated authentication (IE pop-up for auth).
The username and password that I need to use are unrelated to the Windows domain that the servers run in, meaning you can think of the website as if it were a public site (it isn't, but it has no security sharing with the domain where the agents run - no trust,
no nothing).
I can easily accomplish this by hard-coding the username and password within the script (powershell), however, I don't want to do this for security reasons. Here's a rough example of the relevant code:
$targetURL = "https://somehost.somewhere.something/filename.zip"
$path = "c:\downloads\filname.zip"
$wclient = New-Object System.Net.WebClient
$wclient.Credentials = New-Object System.Net.Networkcredential($uname, $pword)
$wclient.DownloadFile( $url, $path )
What I want is a way to pass the $uname and $pword variables to this script securely, with the script running on a schedule under SCOM. The SCOM agents run as localsystem and need to remain that way.
I currently use Run-As accounts and profiles for other functions where the entire script runs under the run-as profile, but I can't figure out how to extract the username and passwords, and doubt it's even possible.
To be clear, I cannot run the script under the given credentials as a Run-As account as those credentials are not known to the local server. I need to somehow pass the credentials to the script (other than hardcoding) or extract them from the run-as accounts.
I've looked at the get-runasaccount cmdlet and can see some of the info there, but don't see a way to re-use, pass-through, or extract the password for use in my scenario.
Any guidance? Can I get there from here?

Hi, check this
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ebfc706d-93be-4ca0-83e0-33d9e072fb97/powershell-script-monitor-with-encrypted-password?forum=operationsmanagerauthoring
But you should not specify runas account for your workflow, just reference Runas Username and Password from Profile and use simple authentication. (The same way as in article above)
So in the end your script will be executed by default action account but you'll pass username and password securely to your script.

PSE 4.0 on Mac: cannot run postflight script

Similar Messages

Maybe you are looking for