PSE 4 Layering Questions
I am new to PSE and am having a hard time getting the layering right, I need some "laymans" terms and easy first steps to work with, any help is greatly appreciated. For example I wanted to change an image to B&W (no problem doing that) then colorize the flowers the girl is holding, but I just couldn't get it to work. I'm lost, please help!! Thanks so much,
PSE Dummy
Alison,
To add to what Charles said..
If you paint too far and reveal excess color, simply switch to white and paint to "erase" the excess. That's the benefit of using an adjustment layer.
You might also want to use a soft brush if you want a soft transition between the B&W and color portions.
Similar Messages
-
Anyone hear use Adobe Forums? PSE 9 question.
I needed to post a PSE 9 question and have been trying to use adobe forums for days. When I attempt to login, my browser goes into a redirect loop forever. Anyone else experienced this?
Just in case I'll ask the Question here. I have PSE 9. Seems that the redo last filter with dialog box no longer functions (option-cmd-f). Did it go away? Now it brings up a Feather dialog.
Bummer.I hope you receive some replies as I have a very similiar situation. I wish I could help but obviously I cannot.
\Good luck! -
I have used PSE 5 since it came out and think I'm ready to move up to 9, enjoying it once I get use to new layer and adjustments at the bottom of layer dock instead of top . Have spent time with the help file and new things. Only problem I have run into was Out of Bounds.
So I have a couple quick questions.....
I'm thinking the clone tool changed somewhere ... When I use it seems to sorta make waves and I see what I "alt clicked" in/on the tool as I move it around???? Is that the new way??
The other day as I was working in 9 I must have done something because the tool bar, the windows/docks on left and photo bin, disappeared leaving the edit pictures filling the whole space. What was that?
Thanks
MichelleThank you... yep I was reading through shortcuts in help and found the Tab key. Did'nt quite understand it..? Yes the Tab key created the whole screen shot but the help says "Move through controls" (?) and the Enter and Spacebar did'nt do anything?
Show full-size thumbnail of selected photo
Enter
Enter
Move through controls
Tab
Tab
Select control
Spacebar
Spacebar
Thanks again, it is so nice to get these little things figuared out..they can take me forever and can't seem to just let it go
Michelle -
Autoblend question layers question cs5/cs6
hi
i have a question about autoblend question
i have to say that autoblend in cs5 , cs6 work very well
but may i know which is the component that handles about blend many layers?
there is a script but there are few lines of code
is there a plugin ? in a components? in hardcoded in the program?
because it gives great results but i have not a lot of conrol in this process
i don't like hdr , i like blend many exposure
i know only photomatix that gives me some control and enfuse
but in photoshop i can 't find a way to control the blending process
thanksI don't have a definitive answer, but I have a feeling that a student teacher version is not eligible for an upgrade discount. You own the CS5 perpetual license, and can install it on two computers at the same time as CS6, CC etc. That will be the case in perpetuity. (not sure why I didn't just type 'forever' back there, or alert the cliche police 'Going forward')
Photoshop CS6 Extended will cost you just shy of US$1600 according to this Amazon page The non extended version does not give you the 3D tools, and Photoshop CC comes as the full extended version as standard. If you got the Photoshop / Lightroom Photography plan at a mere $10 a month, the price of CS6 would keep you subscribed for > three years. Photoshop CC has a lot of wonderful features CS6 does not have, and will never have, and CC will be be constantly updated 'in perpetuity'. ;-) $10 a month! Heck, what's not to like about that?!!! -
Picture locked, but need to arrange clips in layers question
Hey guys,
I'm wondering if anyone knows if there is a way to lock all the clips in time but still be able to arrange them in layer order. In other words I'm arranging the sound clips to specific layers (all narration on one layer, fx on another, etc) but I can't allow any clips to change their time on the timeline.
Is there a cheat for this or do I just have to be really careful.
CiaoWell I'd not turn on snapping, because I may not want to snap at all. If you hold down that shift key, you'll see you can do this quickly... zooming in to see say 3 minutes at a time aught to be close enough I'd think. It's easier than you think...
You have to work pretty hard at NOT keeping the audio clips in the same place if you keep the shift key down during the drag up or down.
Jerry -
I currently have PSE 7 and have been frustrated with the movie playback of HD footage from my point and shoot, the lack of facial recognition that auto tags, and no facebook integration. I have been toying with switching to Picasa which has all of the above. Now with PSE 8 - it looks like the facial recognition is in, but I have read posts about jerky video playback. I have been loyal to Adobe, using Elements back when it was just an organizer. I like the layout and ease of tagging. I have a large, tagged, photo collection which is why I am hesitant to switch to another program.
1. Is there a approval process for the facial recognition? What happens if it tags the wrong person?
2. Is there facebook integration?
3. Can I run both PSE7 and 8 to try PSE8 for myself, without messing up my PSE7 catalog? I would like to use all the same photos for both versions so I can accurately test PSE8.
I am running Vista 64.
JasonYou can change the tags assigned by face recognition. There is no integration with Facebook. You can have multiple versions of PSE installed, and they don't interfere with each other. When you install the free trial of PSE 8, it will convert a copy of your PSE 7 catalog, leaving the original untouched.
-
PSE 12 -- Question on searching organizer
Hi - I recently upgraded to PSE 12 from pse 9.
I spent a lot of time tagging my photos -- primarily people and location -- and am trying to search on location and time/date to select photos.
Here' the scenario. Each year we go to the outer banks, so my outer banks pictures are tagged with a place called outerbanks. I would like to pull up photos from my 2011 trip to the Outerbanks without pulling up phtos from other years. What I want to do is select all photos with an outerbanks place tag and all photos with metadata date created of August 2011.
I cannot find a way to combine metadata and tag searches.
Note - I realize that I could create an event called outer banks 2011 and assign all outerbanks 2011 pictures, same for outerbanks 2012, etc... My preference would be to use the data we already have ( place and metadata tag <date created>) to select.
Any help would be appreciated.
Thanks,
MattHi,
Metadata is not the same as tags although metadata may include the tags.
When you first import an image into elements, the metadata (camera info etc.) is read and stored in the catalog. Whenever you create and apply tags, they are stored in the catalog. The tags may get written to the metadata area of an image at a later stage.
To find the images that mattman99 wanted, you need to go to Find -> Find by Details (Metadata) and fill the form in similar to this.
If Outerbanks is a Keyword tag :-
or, if Outerbanks is a Place tag
Note that you need the All option. The search can be saved for later use.
There are other ways, using timelines and things.
Hope that helps
Brian -
I thought I had this down pat but do not. I have text on a page and simply want to add a colored background to just that page. So I select the rectangle tool and create a square about half the page size then fill it with a color. I see that the text i had goes to the bottom of the page where the box ends as its on the same layer.
I tried various stacking methods and and send to back but still the text does not appear on top of the rect background like I want.
Any help?
RCreate a new layer on the bottom of the stack.
Lock all the other layers (tip: you can alt/opt click the lock area for
the layer you want to remain unlocked)
With the bottom layer being the only available layer you can easily draw
your frame and fill it with the color you want.
Alt/Opt click the lock for the background layer and all the other will
be unlocked and background will be locked. -
Elements 10
Load photograph.
Create duplicate layer to work on.
Create adjustment layer (but also tried this with just "Layer").
Move adjustment layer to top layer and make sure I am working on that layer.
Select brush.
Brush color to black, opaique to 100%.
Move back onto top layer to paint... nothing.
Try switching from forground to background... nothing.
Try every switch and button I can think of...nothing -- brush doesn't do anything at all.
If I move back to the duplicate background layer, brush works... but not on any layer above.
Seems like i am doing everything the tutorials on Youtube do... but the brush doesn't leave any trace anywhere on the top layers. What am I doing wrong?
MHi,
this normally appears to happen when we have added an adjustment layer and not made any change to the settings. Hence, as there is not change done, hence there is no change visible when you paint with the brush on the mask.
when you arepainting on the image(mask) to hide the selected areas, notice the mask added to the adjustment layer,( adjacent to the adjustment layer icon)
If you can find some areas black and some white, this means brush is working fine but you need to make some changes to the adjustment settings of that layer from the "Adjustment panel"( you will get this by double clicking on the left icon of the adjustment layer, a panel will show up, either floating in the application or tabbed below/above the layers panel)
You move some sliders of the settings to see the difference on the image.
Hope this helps and solves the issue. Please mark this as correct answer, if so is the case, else, revert back -
Illustrator - After Effects Layers Question
Having problems importing Illustrator layers into After Effects. I've tried all the recommendations from "release to layers" to "setting colors to rgb". When I import into After Effects and select "composition - retain layer size". AI layers are sub layers too.
I don't see the individual layers to animate.Here is the pre- "release to layers" :
Any ideas? -
Photoshop merging layers question.
hey guys. So i have a complicated photoshop document that I am going to use for silk screening. Aka i have layers that have adjustments of threshold, with different blending options, etc. I want to merge it down to a flat image so I can select each color on the document (the process for silkscreening), but when i flatten image, merge visible, or even save as a tiff or jpg, the threshold layers dont merge for some reason. Any ideas?
I think it might be because they're not actually layers, but avatars of alpha channels. But really, don't accept that as the last word on the subject.
-
Photoshop video layers question..
hi all i just wondered can you ",say import an avi video into photoshop and draw on each inividual frame with the drawing tools" and then make it back into a movie which includes all the changes you have made??
any help on this subject would be awesome !! thank youYes. That's exactly what the feature is for. Note that Video Layers are only supported in Photoshop Extended.
-
I am confused by how to get the layers to not show work on another layer ex:
1. My healing brush or clone-stamp work will become visable (the acctual brush moves I did) when I switch to a different layer.
OR
2. My brush, dodging burning etc will not work where I have used for example the healing brush or clone-stamp on the same or another layer.
OR
3. If I switch the layer order around either the brush work appears but most likely the healing brush and clone-stamp work
I know its most likely a silly littel thing to do to prevent all of the above from happening, just haven't been able to figure it out yet.
Pls help.
KateI think you are going to need to describe the problem more clearly. I doubt that anyone can figure out what you are talking about. I certainly can't.
-
I have, unfortunatly, made the mistake of putting all the objects in my
drawing on one layer; there are about 60 items. I'd like to have them all
on seperate layers. Is there a way to put them all on individual layers in
one shot instead of doing it one by one?
Thanks,
RichardEach object on it's own layer is little better than all on one layer. Effectively, that's what you have. Expand a layer by clicking on the east-pointing arrow to the left of the layer name. This will allow you to see each object on that layer. Double-click on a name to change the name in the Layers palette.
-
Camera and/or null layers question
Hi - I am having a heck of a time understanding camera null layers. I have 3 separate photos on different layers and a solid background on the bottom layer. i simply want to fly a camera in between the separation of the photos so all three look like they're flying toward or past the camera.
every video tutorial i find seems to have an assumption that i know or understand this but i really don't - i need to start from the very beginning. does anyone know of a nice simple step by step video online that can help me?
thanks.Start here to learn After Effects.
You don't need to use null layers to control cameras. It's just a way to make certain things easier. But it makes things easier at the expense of a somewhat complex setup. If you're a beginner, you don't need to be messing with that.
Here are some useful resources for learning about animating cameras. The ones from Andrew Devis listed in the comments on that page are quite good.
Maybe you are looking for
-
I am trying to upload my PDF file from my iBooks but its only giving me the option to upload from my pictures/gallery. How do I get it so I can upload from my iBooks or move my PDF files to my gallery so I can upload it?
-
Question about servlet.xml setting
<?xml version="1.0" encoding="UTF-8"?> <!-- Example Server Configuration File --> <Server port="8025" shutdown="TEARSDOWN"> <!-- Comment these entries out to disable JMX MBeans support used for the administration web application --> <Listener classNa
-
White Boxes from EPS Not Showing Up in INDD CS5
this is kind of lame, but I'm still curious... I have an Illustrator eps file (CS4) that had black and white shapes, text, etc (very simple), however when I placed the eps file into InDesign (CS5), the white box did not show up. There is a black stro
-
Webservcie: No endpoints found
Hi gurus! I'm new to WebServices.... I'm trying to create a webservice for an RFC function module (ZBAPI_HELLO_WORLD). I've already tried some manuals like http://help.sap.com/saphelp_nw70/helpdata/EN/0d/2eac5a56d7e345853fe9c935954ff1/content.htm, st
-
Passing object type as parameters
HI All, I am having a procedure as parameters below Procedure xyz( one in Varchar2 two in Varchar2 three in inv_abc_obj four out inv_def_obj); No i need to run this procedure as stand alone. The object inv_abc_obj is again of type inv_abc_obj as obje