PSE 4 (WinXP): Version set not working

I have about 7000 thumbnails in my catalogue.  Just recently I have had a problem when creating a version set - I get something like a catalog error (sorry, I didn't write it down when it happened - I think it's a DBA error?) and the original thumbnail is displayed only in the Organiser, without a version set icon in the corner.  The new jpeg is still saved, it just doesn't show in the version set, or the catalogue at all.  Furthermore, when I 'get' new photos from the folder I saved the jpeg in, I get an ODBC error - again, apologies that I can't transcribe it: I checked the 'don't want to see any more' box pretty quickly.  So the new jpeg I created is somehow both in and 'not in' the catalogue.
Help is appreciated.

Thanks! I might not have found that feature for years.  Or might have found it previously, and forgotten it was there .  That allowed me to import the new thumbnails to the catalogue, but not repair the version set.

Similar Messages

  • Save as Version Set not working

    I am using Elements 9, and the Save as Version Set has stopped working.

    Yes, that's right. It still doesn't save the image as a version set. I've seen a couple of other posts from people with the same problem, and so far I've not seen a solution. I've even tried reinstalling but it made no difference.

  • Save in Version Set not working

    I've been using Elements 9 for about a year, and just recently when I try to save a file after editing, and selecting Save in Version Set with Original, the file is saved to the original location, but it's not saved as a version set in the catalogue. Can anyone please help?

    Yes, that's right. It still doesn't save the image as a version set. I've seen a couple of other posts from people with the same problem, and so far I've not seen a solution. I've even tried reinstalling but it made no difference.

  • PSE 6, winxp, version sets seem to be locked and I can't 'CLOSE" them.

    PSE 6, winxp, version sets seem to be locked and I can't "CLOSE" them. I can't get the files to unlock though I repeatedly open them up in the editor as requested and CLOSE them. they're still locked. any sugesstions on what I'm doing wrong?

    How do you mean locked? What can't you do? Are you trying to collapse the version set, or do you want to do something else?

  • Purchase Order Goods Receipt quantity tolerance setting not working.

    Team,
    We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
    The issue that I have is as follows:
    Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the  material master and also changed the message to a warning in OMCQ for message number M0722.
    I  had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
    I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
    I have searched for OSS notes, however they mention that there is no solution.
    Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
    Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
    Thanks

    Hello,
    Please check the Tolerance levels in O588 
    Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
    Best Regards,
    R.Brahmankar

  • TS2776 I can"t syn my ipod nano as I had a new version of itunes installed as my old version was not working at all. The message I get is that it can't sync as my old music library is not on the new version of itunes but I still have it on my ipod.

    I can't sync my ipod nano with the new version of itunes that I downloaded as the old version was not working. The response I get is that" it can't sync due to my old music library which I still have on my ipod, can someone help with this, Thanks Peter

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Debug version works well, but release version does not work with simulator

    Hi,
    I use iOS 7.0.3 and Xcode 5.0.2.
    I developped one application and I tested with simulator-ipad retina. The debug version works well and release version did not work at all.
    The basic configuraton is like this:
    cocos2d: cocos2d-iphone v2.1
    cocos2d: compiled with Profiling Support: NO
    cocos2d: OS version: 7.0.3 (0x07000300)
    cocos2d: GL_VENDOR:   Apple Computer, Inc.
    cocos2d: GL_RENDERER: Apple Software Renderer
    cocos2d: GL_VERSION:  OpenGL ES 2.0 APPLE-9.2.1
    cocos2d: GL_MAX_TEXTURE_SIZE: 4096
    cocos2d: GL_MAX_TEXTURE_UNITS: 8
    cocos2d: GL_MAX_SAMPLES: 4
    cocos2d: GL supports PVRTC: YES
    cocos2d: GL supports BGRA8888 textures: YES
    cocos2d: GL supports NPOT textures: YES
    cocos2d: GL supports discard_framebuffer: YES
    cocos2d: GL supports shareable VAO: NO
    What is the reason and how to fix it?

    Well, yes...you need to upgrade to OS X Server 4.0 ($19.99)...I already did it also!

  • Command Sets not working on ACS 5.1

    I'm running ACS 5-1-0-44-3.
    I have everything running properly on ACS 5.1.  I'd like to implement command sets for selected users and groups.  Under Access Policies -> Device Admin-> Authorization I have Command Sets selected.  The cisco provided is DenyAllCommands.  I have this command set running on all groups and every groups is still able to issue any command they wish.  I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
    Am I missing something?
    Do you need to reference the command set name under the shell profiles?
    Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
    I can understand a custom command set not working because of user error but DenyAllCommands should work.
    Anyone have any ideas?
    I have already re-patched the ACS
    Stopped and started services.
    And it seems like Command Sets is the only not referenced in the logs

    I do it a lot 
    could you paste screnshot of your command set?
    I've recently met another issue,
    with my command set definition as below (as you can see its very simple):
    almost every show is blocked (as suspected) but not "show run" (which is strange for me)

  • I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Create DC Failed: base-version-set-not-open

    About a week ago, I created a new track BAMSPOC2.  I imported a number of components into it from another track.  Today, I'm trying to create a new DC on this BAMSPOC2 track.  However, I keep getting a "Create DC Failed" error such as the following:
    Mar 19, 2007 2:31:03 PM com.sap.ide.eclipse.component.core.DCController [Thread[main,5,main]] ERROR: Create DC failed: Unable to create remote path "ws/BAMSPOC2/myvendor.com_BAMSPOCSC/dev/inactive/DCs/myvendor.com/capabilities/_comp/" for component moint point: Could not create remote path /dtr/ws/BAMSPOC2/myvendor.com_BAMSPOCSC/dev/inactive/DCs/myvendor.com/capabilities/_comp/ (Conflict [(pre||post)-condition failed: x:base-version-set-not-open]).
    Anyone have any ideas as to what this error is? what base-version-set-not-open means?
    A local folder is created: DCs/myvendor.com/capabilities/_comp/
    And, I can create DC's on other tracks just fine.
    Using NW 7.0.09

    C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear
    can you find this ear in your local drive?

  • Restore last view setting not working in version XI

    When reopening documents the new version XI, Adobe keeps opening my documents on page one. Though I have gone to preferences\documents and checked the box for restoring last view setting when reopening documents. Is this a bug that needs fixing? I already uninstalled and re-downloaded the program. It still will not work correctly.

    it still does not work for me. It is set to 1 minute. I have tried it in a number of pdf's. I left it longer than 1 minute and it still does not work. It does not work for any of my pdf's but it DID work in previous versions. I guess I will just go back to version 9! They should be able to fix this though. I also re-downloaded, deleted the program, and loaded it again.... still doesn't work!!!

  • Versions Set not saving in Organizer 9

    Using Organizer and PSE 9 on a Mac, about 13,000 photos in single catalog. 
    Had been using Versions Sets with no problem, but now the edited image is not being added to the version set.  It works okay if I do the edit in Organizer - the edited version saves in version set.  But if I go out to PSE for edits and save edited version, a version set is not created.  Using Save command in PSE and the "Save as Version Set with Original" box is checked.  Have  closed Organizer and reopened, also ran the repair catalog in Organizer, but no change.
    Thanks,

    Same issue here. Some files it works, some not. I cannot find any elements that would be causing this. I thought the file name could be too long, or contain special characters, but I have been able to make it work in some cases.
    I'm not sure forums are monitored so I guess we're just out waiting for an update that would miraculously correct this...
    In the mean time, when you do edit within an album, the edited files gets added to the catalog but not to the album, which is left with just the original. Very unuseful...
    In the hope that someone will find a solution to this.

  • IPhone 6 Battery Usage setting not working.

    When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

    Hello.
    I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
    I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
    I wrote to the Apple about this problem.
    Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
    Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug ​​report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
    Regards 

  • Java 8u31 (last version) is not working Yosemite

    I have installed java normally 8u31. But, On browsers google and safari, it is not working. I see blank page. However, when I check it on terminal, given
    java version "1.8.0_31"
    Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
    Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
    Java content is also enabled on system prefences security tab
    after a while time verify page shows
    Thank you for solution

    Hi,
    Check whether  environment variable JAVA_HOME present or not ?
    If no, then set the variable with value as path of java home directory.
    Thanks
    Anil

  • PSE 13 version set

    I'm unable to view, manage or otherwise use version set options in PSE 13 (Windows 8.1) even though the set is created and the set exists and can be viewed in File Explorer.
    It makes no difference if the set is created in the Organizer or manually saved as a copy in a version set in the Editor.
    All version set menu options are greyed out.
    I converted a catalog from PSE 10...repaired and optimized that...created a new catalog in PSE 13...no difference.
    Any clues....?

    View>Details and you should be able to work with version sets. The new adaptive grid view doesn't do versions.

Maybe you are looking for

  • Multiple Order Panels as JInternalFrames in one Form as a JDesktopPane

    I have a JClient application which consists of a form(JFrame) which opens a JDesktopPane. Within this desktop pane the user may open different panels(as JInternalFrames), one of them being a panel to create a new order. I want to have the ability for

  • Calling an ABAP program from a document list

    Hi, we have the following problem with a custom ABAP program. This program executes a lot of user's functions, such as documents creation, material movements creation, and so on.. from a single dynpro. We would like to call this program from a list o

  • Saving document question

    I have created a fillable form with Adobe Acrobat Professional 9.  It is posted to our website for users to fill out, print, and save the completed form on their computer.  What is happening is when they save it, any fields that are radio buttons rev

  • Multiple dialog instances on same host for different System

    Dear Sir, I install two dialog instances on same host ,one for DEV one for QAS. First I install dialog instance for DEV and startup with no error. Second dialog instance for QAS install with success end ,but can not start dispatchers. Service sapmsDE

  • How do I set application to open same place and same size as when exited

    When I close an application, like TextWrangler, I would like it to open with the same size / dimension and in the same location of my desktop as it was when I closed it.  But it doesn't.  Is there a way to make this happen? JP