PSE 5.0 won't load past "Reading Preferences"

Reinstalled PSE 5.0 on new computer running Windows 7.  Downloaded the service pack for PSE 5.0.2.  Read that I needed to adjust the compatibility to Windows XP (service pack 3)  PSE opens, but only as far as "Reading Preferences," then never goes farther.  Any suggestions would be appreciated.

I don't have much idea about PSE5 but try resetting the preferences:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

Similar Messages

  • NAND script and won't load past apple screen

    My I phone 5 has crashed won't load past apple screen and has a list of NAND scripts can anyone help or had this happen

    Standard troubleshooting...
    1. Remove apps from the Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    2. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.    You may need to try DFU mode (Google for it).
    6. If still a problem, it's likely a hardware issue.

  • Iphone 4 won't load past logo screen

    While on vacation, my phone went black. I thought the phone had gotten too hot, so when I got back to our room, I plugged it into the charger and after a few minutes it said "activation required", then brought me to the "connect to itunes" screen. Of course, on vacation, I didn't bring my computer! So after a week gone without my phone, I am connecting it to itunes and it won't load past the silver apple logo screen and itunes won't recognize it!! Help!! Is my phone trash or can it be saved???

    My solution: I opened the phone, removed the battery, cleaned out the battery connector and reattached the battery. The phone turned back on and showed the low battery sign.  I had done this before and it didn't work. Apparently the problem was I hadn't properly connected them. You need to make sure it's locked on tight so when you close your phone slides on easily.

  • IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

    Urgent help!
    Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
    PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

    The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
    If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT1547

  • Help! Won't load past white screen!!

    I need help please! My curve won't load past the white loading blackberry screen. I downloaded an app from the app store and it crashed my phone.  I called my carriers tech support but they are backed up and it might be a days before they can get back to me.

    Jenn, If your BlackBerry stays powered off with a white or black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Satellite M40 won't load past BIOS screen

    when i turn my Satellite M40 on sadly it won't load past about 7/8ths of the blue bar going across the screen.
    this has left me completely baffled as what to do.
    apparently it could be repaired by removing the battery cables on my CMOS?
    would anyone know how i would go about doing this? or have any other ideas?
    thanks xx

    Hi Dec,
    The scrolling blue bars indicate that the Wondiows operating system is being loaded from the hard drive. If this process stalls during the load then it is likely that either the hard drive itself is defetive or the files which are being loaded are corrupt and cannot be loaded.
    Interfering with the CMOS chip will not correct this problem since the BIOS has already been loaded at this stage.
    If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you try booting from it and running a scan of your hard drive. Alternatively you could try re-installing your operating system from the Toshiba recovery CDs but this will over-write any of your own data on your hard drive.
    regards

  • My laptop won't load past the main blue screen

    Hi, I went to restore my laptop to a previous point, it did the usual things, it switched it's self off to then restart again but won't load past the main blue windows 7 home premium page, it it keeps flickering as well, I've tried switching on and off and taking the battery out, nothing works, never had this happen before :-S

    Hello again, sorry that the steps that I we have attempted have not resolved the issue. I have a tool that you can try. It's called the HP Support Assistant. If you have any computer issues, the Support Assistant will find them and give you solutions to the issues or resolve them for you. Please click on the link that I have provided.   http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • WARNING: Premiere CS6 won't load past "Loading ExporterQuickTimeHost" after QT 7.7.3 update

    Just what the subject line says, Premiere CS6 won't load up past the splash screen and "Loading ExporterQuickTimeHost" after I updated to QT 7.7.3 (Win7).  No other updates done, my CS6 is up to date.  I reverted back to 7.6 and problem went away.  Just an little word of warning to those who see the update pop up.
    If you run into the problem, here's the link to download 7.6.  You will have to uninstall 7.7.3 then instal 7.6.
    http://support.apple.com/downloads/#quicktime

    I ran into a similar issue on Premiere Elements 11:  On program launch, the system hung on "Quicktimehost.pm".  After some troubleshooting with no success, I:
    1) Uninstalled Quicktime version 7.7.5
    2) Installed Quickitme version 7.6
    3) rebooted my machine
    4) SUCCESS-> launched Premiere Elements 11 without issue
    Hope this helps a few others!

  • My iTunes Match won't load past step 1; All songs in my library say "Exceeded Limit", even the ones that were uploaded before.

    My iTunes Match hasn't been working for a couple of days. It said I had exceeded the song limit, so I was going through my library and clearing out some songs. When I deleted the songs, the box that asked if I wanted to delete them from the cloud wasn't showing up. I decided to update my iTunes Match before deleting anything else. When I attempted the update, Step 1 moved incredibly slowly, then stopped working before reaching Step 2. When this has happened in the past, I have been advised to try several troubleshooting tactics from the support forum and from writing to Apple support in the past. The first one is to turn off iTunes Match, restart the computer, and turn on iTunes Match again. I did that. The same problem occurred. I tried the second trouble shooting tactic, which was to turn off iTunes Match, close iTunes, find the iTunes Library Genius.itdb and iTunes Library Extras.itdb and move them to the trash, then run a Repair Disk Permissions using Disk Utility, then turn iTunes Match back on. I tried that. The same problem occurred. I went to my iTunes library to see the iCloud status of my songs, and every single song was listed as not being in the cloud yet and had the "Exceeded Limit" status, even the songs that have been in my cloud for over a year. I checked a few of the forum topics here on the support site. One suggested opening up iTunes while holding down the Option button, creating a new library, then turning on iTunes Match and deleting songs from the cloud that way. Then open up the original library and turn on iTunes Match. I did that. The status of my songs hasn't changed, nor can iTunes Match load past Step 1. Does anyone know what I can do to fix this?

    Maybe I didn't explain it properly, but that's one of the things I described trying in my first post. It helped get songs out of my cloud that I didn't need there, but iTunes Match still couldn't get past the first step. Last night I deleted the iTunes Library Extras.itdb, iTunes library Genius.itdb, iTunes Library.it, and iTunes Library.xml files from my computer, entered Time Machine, and recovered those same files that had been backed up after the last time I added music (the time the problem began.) After recovering those files I opened iTunes and turned Match back on. For some reason, it worked, even though those were the files that existed when the problem initially occurred.The combination of having songs removed from the cloud as well as restoring those original files must have done something, but I have no idea why that fixed the problem.

  • Computer Won't Load Past Grey Screen

    So I was using my computer last night and it just died on me. The battery says it is full and all too. But when I go to start it back up again, it won't go past the grey screen. I have tried all the keyboard shortcuts and nothing seems to work. I have had it on and running for about 30 minutes so far and nothing has changed.
    This has happened to me once already and I had to have the whole computer restarted and I lost everything. I really don't want to lose everything yet again but I don't know what to do.
    I also cant seem to find my OSX startup disk. Of course. I was wondering what are all the options/keyboard shortcuts so I can try everything before I decided to just give it to the tecs to deal with.

    !http://i46.tinypic.com/2nvn6f.gif!
    "I have tried all the keyboard shortcuts and nothing seems to work."
    Which ones? Need details to avoid the +"been there, done that"+ scenarios.
    "I also cant seem to find my OSX startup disk."
    You will need to locate the Install DVD in order to troubleshoot. Otherwise, you will end up w/a very expensive door stop.;)
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    !http://i50.tinypic.com/izvwo1.gif!

  • Ipad won't load past apple screen

    My Ipad won't load or shut down.  When the cover is opened the screen w/apple is there..desktop sometimes comes on, but as soon as screen is touched it returns to apple screen. I backed up the ipad with itunes on computer and attempted to restore it but it  won't
    restore until "find my ipad" is turned off, which I can't do since the ipad won't load the settings. 
    Updated to ios7 two days ago and was working okay.  I'm not sure if this has something to do with the update.

    Have you tried rebooting?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My powerbook won't load past the grey apple logo screen

    I had been away on business for a few weeks and yesterday I decided to run the latest updates for my powerbook. In the middle of it the computer froze for what I think is the first time since I bought it 2 years ago. I ended up having to shut the computer down with the power button. When I turned it on it wouldn't and still won't advance past the grey apple logo screen with the progress indicator. It just sits there for hours on end if I let it.
    So far I've tried the following, all to no avail.
    Booting in safe mode I get the same result.
    Zapping the Ram
    Resetting the PMU
    Reinstalling OS X, during which the computer either randomly shuts down or goes to sleep and then shuts down and requires me to reset the PMU in order to start again.
    Running the hardware diagnosis. I did this once and it froze during the logic board test, 1 minute 6 seconds in to it.
    Anyone have any ideas that don't involve spending 900 dollars on a logic board? Thanks a lot for any help.

    joeuu, thanks for the reply. i checked the airport and the ram and both seem to be seated properly.
    i ran the quick hardware diagnosis and it came back showing everything was fine.
    when i ran the extended one i got more progress than i did the first time. it got to the RAM diagnosis (about 6:45 seconds in) and then froze - i let it sit like this for an hour and a half to make sure it was actually frozen.
    i also tried to run the disc utility from the installation disc and it just sits there with the progress wheel spinning, but nothing else is going on.

  • Macbook Pro won't load past a grey screen on startup!

    I apologise for what will most likely be an essay ahead.
    I have a Macbook Pro (2.16ghz) that is just over three years old. It is running on Leopard with all the up to date patches / updates. Over the past week or so, it has been 'playing up' in the sense that the spinning loading icon would appear at random intervals and stay there for a good 20 to 30 seconds or so, not allowing me to do anything. If I would be listening to music, the music would pause and then come back on.
    It would normally appear when something was trying to load. For example, the final straw was when I was using Adobe Bridge and it was taking an extremely long time to load up the photos I had imported and in the end I gave up. Speed has never been an issue before and my MBP has 2GB of RAM.
    So I backed up what I needed and proceeded to do an 'Erase and Install(Leopard) format. Once formatted, the MBP booted up and I completed the registration, took my User picture blah blah etc. Once done, the MBP booted into OS X - this is where the problems occurred. The spinning loading icon appeared and after about 30 seconds or so, the Finder window / toolbar at the top disappeared, as did the Macintosh HD icon on the desktop. All I was left with was my wallpaper and Dock with icons in. However, if I clicked on any of the programs, nothing would happen.
    Naturally, I tried restarting it and the same thing happened again. I figured that because my MBP was connected to a second Dual monitor, that this might have been the issue so I decided to boot from the OS X Leopard CD and do another 'Erase and Install'. I once again got past the registration screen, but this time, instead of booting into OS X my MBP stuck itself on a grey screen. It would not go any further.
    I then decided that the spinning loading icon issue may be a RAM problem. When I first got my MBP, I upgraded the RAM so I knew how to take it out and replace it. So I tried taking out the RAM stick (1GB) I put in orignally and booting it with the original 1GB stick. The same problem occurred. I tried the other way round, putting in my 1GB RAM stick and taking the original out - nothing worked. I tried every possible combination, even swapping the sticks around.
    Eventually my brother tells me he has some spare RAM which I also try and once again, this does not solve the issue. So I figure it cannot be a RAM problem.
    So next I try booting from the OS X Disc on startup and run Disk Utility. I verify and repair the Mac HD which comes up fine. No errors, no issues, nothing.
    I finally scour the internet for info on what could be the cause of the problem and the biggest suggestion seems to be formatting. So I once again try formatting my MBP for a third time - however this time, I get the original problem. It boots up into OS X but then the Finder toolbar and Mac HD icon disappear, leaving me with Dock and Wallpaper.
    The final thing I try is resetting the MBPs PRAM on startup. This does not solve the issue.
    So here I am. If you could be bothered to read all of that, well done haha I'm not sure if I could have.
    If anyone has ANY suggestions or advice, please post!
    I do not have Apple Care so if I was to take it to the local Genius bar, would they look at it for free and diagnose it? Or would that cost me? I have never had to take my MBP in before.
    Thankyou again

    I just skimmed over this because the post is like a small novel! lol Try a Apple Hardware Test. I think it's probably a bad logic board.
    http://support.apple.com/kb/HT1509
    Don't take it to a Genius Bar until you've done this, saves time and you might have a little more info to give them. Also that way you won't feel pressured into anything. It's out of warranty, so sometimes I've noticed they can be a little pushy especially on a very high dollar replacement such as a new logic board on an out of warranty item. Also the "enhanced diagnostic" is around $100, so you might have to at least fork over a hard earned Benjamin and not get anything fixed. And whatever you do, DO NOT, I repeat, DO NOT tell them you upgraded the RAM yourself. If they are feeling in a good mood and decide to knock off any money or waive any sort of fees, this will kill it instantly. RAM is considered "user serviceable," but they normally try to plead "the part you installed is not Apple Authorized" or the "installation caused the issue and was not an ACHT." Put back in the original stick and leave it alone. Hope this helps you out!

  • Macbook Pro won't load past white loading screen when turned on after kernel panics

    Hello,
    I have a Macbook Pro and recently its been having repeated kernel panics. In the past few days its been turning off every few minutes or so. yesterday it had one and now when I try to turn it on it doesn't load. I get the white loading screen with the apple logo and a loading bar underneath. But after the bar fills about 5% of the way (if that) the bar just disappears and the spinning loading icon just keeps going without anything happening (however long I leave it).
    Please can someone give me some suggestions to fix this. Just a few things to note:
    a) I'm not great with computers so any fixes please explain in the most simple terms
    b) I have VERY important work files on there that are NOT backed up (big mistake I know), so please only suggest fixes that will not remove these Microsoft Word files. Guaranteeing the safety of my work is paramount with any suggestions.
    c) I may not have any of the disks which came with the Macbook Pro originally (though I may somewhere)
    d) I've read some other forum posts and it seems that I need to know the details of my operating system. I don't know these and have no way of accessing them on the computer (for obvious reasons). Its a late 2011 Macbook Pro if that is of any help.
    A massive thank you to anyone who can suggest a fix to these, I shall be eternally grateful.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Computer won't load past grey screen with Apple logo, even with OS Disc

    I turn on my computer and only gets to the grey screen with the Apple logo and idling circle. After a while, it loads a small box telling me to restart, time and time again, no matter how many times I restart. I've tried holding "shift" to go into safe mode, it won't let me.
    I believe it's originally a Tiger platform, and right now I think it's running on Leopard.
    I just bought a Snow Leopard OS X Disc, and I inserted it and tried to let it load. It gave me the restart box. I held down "c" while starting up, got the restart box.
    Held down "option", and selected the "Mac OS X install Disc"; it went back to the grey Apple logo screen to load, and gave me the restart box after several minutes. Repeated that and held down "c" while loading, still gave me the box.
    Nothing I do with or without the OS X Disc is making a difference. I cannot load anything on my computer, period.
    Can someone please suggest something for me to try?

    Well if you do then turn both computers off. Connect a Firewire cable between them. Boot your computer into Target Disk Mode. After the TDM screen appears boot the other computer normally. If your drive is accessible it will show up as a disk icon on the Desktop of the other Mac. You can then access your files and transfer them to another hard drive.
    Then open Disk Utility. Your drive should appear in the sidebar list. Select the drive entry (mfgr.'s ID and drive size) then click on the Partition tab in the DU main window. Set the Partition Scheme drop down menu to one. Set the Format type drop down menu to Mac OS Extended, Journaled, then click on the Partition button and wait for the process to complete.
    Your drive should now be OK assuming it's not mechanically damaged. Eject the drive from the Desktop as you would eject any removable drive and disconnect the Firewire cable. Shutdown your computer. You can now boot from the installer disc and install OS X.

Maybe you are looking for