PSE 5 Old dates
I use PSE 5 to store all of my genealogy records - Photos and documents. I re-date the photos & docs to the dates they were taken or produced, now I have documents before 1800. The program will only accept dates between 1800 - 2199, any ideas how to overcome this - Thanks
Anthony,
Did you get the name of the person that told you that? I just found out
from a VERY reliable source that you can... I also tried it and carried
it out successfully. Sorry for the delay.
Cheers
Similar Messages
-
How can I port my PSE with the data to a new PC? [was:Jeanné]
Wie kann ich mein PSE mit den Daten auf den neuen PC portieren?
Jeanné wrote:
How can I port my PSE with the data to a new PC?
Translations by Microsoft® Translator
The only way you can do this by installing the PSE on your new machine using the DVD and the serial number you must have bought. Once this is done, you might want to copy all your photos from the old machine on to a flash drive and then copy them from flash drive to your Pictures folder and let PSE finds them and catalogs them automatically.
This method is ideal if your haven't created very sophisticated catalog in your old machine because you may also want to transfer the old catalog on to your new PC so that you don't have to re-create the catalog from scratch. If you want to transfer the catalog as well then on your old PC launch PSE Organizer and go to:
File >> Backup Catalog
This is also saved on the removable flash drive
Now go to the new PC and launch Organizer and do almost the same thing except:
File >> Restore Catalog
Now this should almost get you started.
Good luck. -
How do I use old data files with a new installation in Oracle 9i
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Thanks for any advice.user3930585 wrote:
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Are you stating that you don't know how to use COPY command?
Can you recreate same directory structure on new C drive as exist on old C drive?
Can you then drag & drop copies of the files? -
JSP page is coming back with old data even when DB updated
Hello,
I am updating an existing record on a database using an HTML form and the changes update the ACCESS database immediately, but the .jsp page is picking up
old data.
But but when i do a manual REFRESH, the correct data comes back fine!
Thanks very much for any insights!
Summary of the code:
1. InputEmployeeInfo.html - enter change data, call update....jsp
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/> </HEAD>
<FORM NAME="updateInfo"
ACTION="./UpdateEmployeeInfo.jsp" >>>>>2.
METHOD="POST">
2. UpdateEmployeeInfo.jsp: - call bean, update database, forward to present..jsp
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
</HEAD>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0); %>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean" >>>>>3.
scope="request"/>
<jsp:setProperty name="empInfo" property="*" />
<% empInfo.updateDatabase(); %> >>>>>3b.
<jsp:forward page="PresentChangeOfEmployeeData.jsp" /> >>>>>4.
</BODY>
</HTML>
3. com.ora.jsp.beans.employee23.EmployeeInfoBean - Bean-update DB with change data
public class EmployeeInfoBean {
public void updateDatabase(){ <----3b.
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
String sql = "UPDATE EMPLOYEEINFO SET " +
"NAME=?, ADDRESS=?, PHONE=? WHERE ID=?";
PreparedStatement statement = conn.prepareStatement(sql);
statement.setString(1, name);
statement.setString(2, address);
statement.setString(3, phone);
statement.setInt(4, id);
statement.executeQuery();
statement.close();
conn.close();
4. PresentChangeOfEmployeeData.jsp - read database and display changes <----4.
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
</HEAD>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0); %>
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
Statement statement = conn.createStatement();
String sql = "SELECT * FROM EMPLOYEEINFO WHERE ID = " + employeeID;
ResultSet rs = statement.executeQuery(sql);
while(rs.next()){
%>
<TR><TD ALIGN="right" WIDTH="50%">Name:</TD>
<TD WIDTH="50%"><%= rs.getString("NAME") %></TD>
================================================================================
Complete code listing:
1, InputEmployeeInfo.html
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE>Change of Information</TITLE>
</HEAD>
<BODY>
<TABLE WIDTH="100%" BORDER="0" BGCOLOR="navy">
<TR ALIGN="center">
<TD><FONT SIZE="7" COLOR="yellow">Employee Information</FONT></TD>
</TR>
</TABLE>
<CENTER>
<FONT SIZE="5" COLOR="navy">
Please Enter Your Information<BR>
Fill in all fields
</FONT>
</CENTER>
<TABLE WIDTH="100%">
<FORM NAME="updateInfo"
ACTION="./UpdateEmployeeInfo.jsp" >>>>>>>>>2.
METHOD="POST">
<TR><TD WIDTH="40%" ALIGN="right">Current ID: </TD>
<TD WIDTH="60%"><INPUT TYPE="text" NAME="id"></TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Name: </TD>
<TD WIDTH="60%"><INPUT TYPE="text" NAME="name" VALUE="Mickey"></TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Address: </TD>
<TD WIDTH="60%">
<INPUT TYPE="text" NAME="address" VALUE="St. Louis, MO">
</TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Phone: </TD>
<TD WIDTH="60%">
<INPUT TYPE="text" NAME="phone" VALUE="555-555-1234">
</TD>
</TR>
<TR><TD COLSPAN="2" ALIGN="center">
<INPUT TYPE="submit" NAME="btnSubmit" VALUE="Update Profile"></TD>
</TR>
</TABLE>
</FORM>
</BODY>
</HTML
2. UpdateEmployeeInfo.jsp:
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE>Updating Employee Information</TITLE>
</HEAD>
<BODY>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean" >>>>>>>>>>>>>3.
scope="request"/>
<jsp:setProperty name="empInfo" property="*" />
<% empInfo.updateDatabase(); %> >>>>>>>>>>>>>3b.
<jsp:forward page="PresentChangeOfEmployeeData.jsp" /> >>>>>>>>>>>>>4.
</BODY>
</HTML>
3. com.ora.jsp.beans.employee23.EmployeeInfoBean <-------------3.
package com.ora.jsp.beans.employee23;
import java.sql.*;
public class EmployeeInfoBean {
private String name, address, phone;
private int id;
public void setName(String input){
name = input;
public String getName(){
return name;
public void setAddress(String input){
address = input;
public String getAddress(){
return address;
public void setPhone(String input){
phone = input;
public String getPhone(){
return phone;
public void setId(int input){
id = input;
public int getId(){
return id;
public void updateDatabase(){ <-------3b.
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
String sql = "UPDATE EMPLOYEEINFO SET " +
"NAME=?, ADDRESS=?, PHONE=? WHERE ID=?";
PreparedStatement statement = conn.prepareStatement(sql);
statement.setString(1, name);
statement.setString(2, address);
statement.setString(3, phone);
statement.setInt(4, id);
statement.executeQuery();
statement.close();
conn.close();
catch (Exception e) {}
4. PresentChangeOfEmployeeData.jsp <---------4.
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE></TITLE>
</HEAD>
<BODY>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
<%@ include file="CompanyBanner.html"%>
<%@ page import="java.sql.*" %>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean"
scope="request"/>
<CENTER>
<FONT SIZE="5" COLOR="navy">
Your New Information
</FONT>
</CENTER>
<TABLE WIDTH="100%" BORDER="1">
<%
int employeeID = empInfo.getId();
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance(); <--------4b,
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
Statement statement = conn.createStatement();
String sql = "SELECT * FROM EMPLOYEEINFO WHERE ID = " + employeeID;
ResultSet rs = statement.executeQuery(sql);
while(rs.next()){
%>
<TR><TD ALIGN="right" WIDTH="50%">Name:</TD>
<TD WIDTH="50%"><%= rs.getString("NAME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Address:</TD>
<TD WIDTH="50%"><%= rs.getString("ADDRESS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Phone Number:</TD>
<TD WIDTH="50%"><%= rs.getString("PHONE") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Work Status:</TD>
<TD WIDTH="50%"><%= rs.getString("WORKSTATUS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Total Sick Days:</TD>
<TD> <%= rs.getString("TOTALSICKDAYS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Taken Sick Days: </TD>
<TD><%= rs.getString("TAKENSICKDAYS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Total Personal Time(in hours): </TD>
<TD><%= rs.getString("TOTALPERSONALTIME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Taken Personal Time(in hours): </TD>
<TD><%= rs.getString("TAKENPERSONALTIME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Health Care Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("HEALTHCAREPLAN") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Dental Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("DENTALPLAN") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Vision Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("VISIONPLAN") %></TD>
</TR>
<% }//end while loop
} // end try block
catch (Exception e) {};
%>
</TABLE>
<%@ include file="ch24_SiteNavigator.html" %>
</BODY>
</HTML><%
String dept_name=request.getParameter("D1");
String itmp,itmcd,sn;
%>
<%
Connection con;
PreparedStatement ps;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:acc");
Statement stmt=con.createStatement();
ResultSet rs=stmt.executeQuery("select * from item_details where Item_Name='"+dept_name+"'
%>
<td> Product name</td>
<td>Product description</td>
<td><Product code</td>
<td>Product price</td></tr>
<form method=post action="mycreate.jsp">
<%
while(rs.next())
%><tr>
<%=rs.getString(1)%></td>
<%=rs.getString(4)%></td>
<td><font color="#ffffff" size="3" face="arial unicode
ms"> <%=rs.getString(3)%></td>
<% String temp=rs.getString(3);%>
<%=temp%>
<td>
<%=rs.getString(5)%></td>
<td><input type=submit value="Add to cart"></td></tr>
<form method=post action="mycreate.jsp">
<%
con.close();
%>
</tr>
</table></tr></table></tr></table>
</form>
</form>
I want the value of rs.getString(3) in a variable -
Webi report gives old data in infoview on refresh
Hi Experts,
We are facing this strange issue on a webi report after some data updation in the SAP BW infocube.
The webi report is based on the universe which is connected to an infocube in our BW dev system. After some data updation in the cube, we had tested the report in webi rich client and everything was working fine (the newly updated data from cube was reflecting). Now, we had tested the same report in infoview, but it was showing the old data only. We had tried exporting the report once again to infoview, refreshed universe structure; but without any success.
What appeared to be even more strange was that the last refresh time was also not changing. While running the report in the infoview it hardly takes 40secs. But on refreshing it says the last refresh time was 5mins.
Any help on this would be highly appreciated.
Regards,
Arun.it sounds like when you refresh report in Infoview you get the cached data, it never goes to the DB to fetch new one...
You'll need to enable traces on webi processing server as well as SOFA/MDX tracing and review log files to see if requests are going to db or not and what is being returned.
It could be at webi proc level or at your BW level.
You can also try disabling webi caching in webi proc server properties and see what happens. -
urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help
to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much -
Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?
Place the device in DFU mode (google it) and restore as new.
-
I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?
If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable. -
How can I delete old data in citadel
How can I delete old data from Citadel so that HDD is not full when data is continously being logged in the database ?
Hi there,
I could see different possible ways to limit the database size on a LabVIEW DSC system.
a) You could limit the lifespan of your logged data to a certain time by adjusting the option 'Days to keep historical data' in the Tag Configuration Editor>Configure>Historical... tab.
b) You could use the Citadel Database VIs. Archive Database.vi would allow you to archive a database or a part (certain traces/tags, or certain time interval) to another location. With the archive option 'destructive', it would delete the source of the data from the original database.
Delete Traces.vi would delete a traces from a database.
c) The same/similar functionality you can have throught the Measurement and Automation Explorer and its Historical Data Viewer plug-in
b) and c) are NEW features of LabVIEW DSC 6.1!
Hope this helps
Roland
PS: There is a nice link about archiving Citadel on ni.com :
http://zone.ni.com/devzone/conceptd.nsf/webmain/2F24997EAD7C53A686256B6E00686D64?opendocument&node=DZ52101_US -
I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!
SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck. -
How can I purge old data on EM Repository?
I'd like to remove my old data of EM repository. For example, removing old data collected before Jan 1st 2007.
Is there any auto-job for that facility? Or Any ideas?Be sure you have your dbms_jobs working and they have run.
MGMT_JOB_ENGINE.apply_purge_policies();
is perhaps the one you need to have run.
You can verify the info
setup tab,
Management & Service Repository
Repository Operations
Then check the date stamps in the Last Scheduled Run
They should be no more than a day or 2 ago fore each and every one of them.
If its not, then check the repostory db dbms_jobs and dbms_job.run(xxx) the job. -
How to view the old data in a column if that column is dropped or rename
Using workspace manager I am not able to track the old data of a column which is dropped.
I have tried by using import and export features that Workspace manager have.. But import is not working properly in this case. And savepoint option is work with DML operation not with DDL.So, I want help in this matter
Thanks In AdvanceNo way even in 10g. You should build another DB and import your exported data.
then you can get data from this new DB.
SQL>create table t5 as select object_id,object_name,created from all_objects where rownum<20;
Table created.
SQL>select current_scn from v$database;
CURRENT_SCN
7724122625
SQL>desc t5
Name Null? Type
OBJECT_ID NUMBER
OBJECT_NAME VARCHAR2(30)
CREATED DATE
SQL>alter table t5 rename column OBJECT_ID to oid;
Table altered.
SQL>desc t5
Name Null? Type
OID NUMBER
OBJECT_NAME VARCHAR2(30)
CREATED DATE
SQL>alter table t5 drop column created;
Table altered.
SQL>desc t5
Name Null? Type
OID NUMBER
OBJECT_NAME VARCHAR2(30)
SQL>select * from t5 as of scn 7724122625;
select * from t5 as of scn 7724122625
ERROR at line 1:
ORA-01466: unable to read data - table definition has changed -
My iTunes account no longer has everything on my iPod-5th gen. I want to put everything on my iPod on my iTunes on my new laptop without losing new purchases that are on the iTunes account or the old data on the iPod.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Okay, I have and iMac dual core Model A1224, EMC 2210, 20" screen, 2.66GHz processor, 2GB RAM, came, when I bought it, with a 500 GB drive circa late 2008. The drive started to fail about 2 weeks ago, random shut downs, wouldn't boot up, couldn't find the OS. Could sometime recover booting up from the original OS disk in the C drive, but eventually even that failed. Had run disk first aid and TechTool Pro6 to no avail, they all passed the drive so it was a mechanical failure,not bad sectors.
REPLACED the drive with a brand new Seagate Barracuda 1TB drive, figured I was all set, Time Machine had backed up the old drive every day since 2009 to an external 1TB drive. I could even see the data there. Now new drive is installed and I need to load the OS to it and retrieve my data from Time Machine. Put in the old disk, Leopard 10.5.1, and walked along and asked it to bring in the data from Time Machine.... except, the data is saved on Time Machine in a new version of Leopard, ver. 10.5.8 and so the 10.5.1 version can't import it, but of course Migration Assistant will allow you to import it later.
So, I continue to load the OS via the disk, then go to software update after creating a new computer name, which I didn't want to do. Updated the software so I am now running OS 10.5.8, open Migration Assistant and attempt to migrate / recover the old data from Time Machine. I can get some stuff, but it insists on my resetting everything up all over again, all new accounts in Quicken and Thunderbird and Microsoft Office, no recovery of data already there and I can't access the accounts that were set up by others, it indicates I don't have sufficient privileges though I was an Administrator on the old computer and on the current system as well.
Frankly, I need that old data, so how do I get it? Do I bite the bullet and upgrade the system to Snow Leopard OS10.6.XX, will that allow me access to old data under OS 10.5.8? Will it be backwards compatible? How about moving up to Lion? Would that be a better way to go and will I be able to recover that old data then?
VERY frustrated here! Thanks for help or direction you all can provide.HI,
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine what he hasn't covered! -
I can't find an option in iTunes to restore to a previous backup. I know I have done this one time before when we got a used iphone 3G at one point and I was able to go back and install his old data on the new phone. Now it is only coming up as my phone in itunes and it recognizes his phone as my phone even though his number is still saved on there. Any thoughts or suggestions? I know this has to be possible I just think I'm not looking in the right place.
Syncing does not backup photos.
Backing up only backs up the photos taken with the device but is not a solution to maintaining you precious photos.
It is the user's responsibility to copy the photos taken with the device off the device to the computer. Same goes for videos taken with the device.
Media on the device has never been included in a backup.
Sorry, but if you've lost the device (or it's been stolen) and you've failed to manage your data on the device, it is gone.
Maybe you are looking for
-
Setup seems right but still TNS-12535: TNS:operation timed out
I have Oracle express Edition installed on Fedora 4. I know the listener is started and believe the tnsnames.ora is configured properly but still get a timout when I try to connect with SQL*Plus. I am able to get into SQL with tue GUI tools but want
-
What is component used to display system files in FTP
Hello, I would like to know what is the component that is used to display system files and remote server files in a FTP. e.g File Name || File Type || File Size 1.jsp JSP file 1kb 2.java JAVA file 10 kb Do we need to use JTable to display the headers
-
Hi. Is it a good idea to install Lion on an ibook from 2007?
I have an old ibook which has stopped working - the 'file' icon with a question mark appears when I turn on. A local Tech shop says the machine is still good - they think I should change the hard drive and upgrade to a new operating system - Lion or
-
Can i install photoshop on 2 computers
can i install photoshop on 2 computers?
-
my MacBook Air (13-inch, Mid 2013) using OS X Yosemite10.10.2 has properly connected G-drive Slim, but it does not appear in Finder; On Screen pop up Warnings: "Back up Failed Time Machine couldn't back up to "G-Drive Slim" " and "Disk Not Ejected