PSE 6 - Downloader Crashes when iPhone connected

The Adobe Photo Downloader opens, detects my iPhone, see the photos, then a dialog pops up and says "Fatal Error - Adobe Photo Downloader has encountered a problem and needs to close. error code c0000005"
Don't take a lot of photos with the iPhone for obvious quality reasons, but annoying nonetheless as I do use the photo's gps data for tagging photos taken with my Canon.
Any ideas on getting the Downloader to not crash?

Hi,
I also observed the same crash once. But, to my surprise, when I reconnected the phone to my system after a month or so, it detected the phone and downloaded the data without any crash.
Could you please share some info on crash as to if you had installed any custom applications and/or updated the firmware of the phone?
Also did you sync your contacts or setup mails when you last saw the crash?
Thanks,
Tarun

Similar Messages

PC crashes when Iphone connected

Hello
For some time now, every time I plug my iphone into my laptop it causes a system crash. I've installed latest version of iTunes. It worked all fine when I first had my iphone and works fine when I plug my iphone into my work computer. But everytime into my laptop, crash. It is very very frustrating. I've tried plugging it in when off, plugging it in when on, makes no difference. As soon as it starts my iphone in itunes it crashes. What's causing this problem?
Thanks

I had a similar problem - my iphone synced fine at first then started crashing the PC after a few days. After reading the reply above - good call Lawrence - I deleted the few photos I had taken on the camera roll and it works fine again. I still need to find which drivers to update but at least I can do everything now except use the camera. Thanks

ITunes crashes when I connect my iPod to the PC when iTunes is running....

I have written about this problem before, but there have not been any successful solutions as of this date. I will explain my situation a little further and maybe someone can help.
Most of the time, when I connect my iPod to my pc while iTunes is running, the instance the iPod shows up on the library site, and whenever I move the cursor, iTunes crashes, so I have to close iTunes right away and try to disconnect my iPod. Most of the time, a message comes up that says info is being transferred to the ipod and that I shouldn't disconnet it at that time, but I usually go ahead because I know it isn't transferring at that time, since itunes has crashed.
Sometimes, after I have clicked on the first message to go ahead and disconnect my ipod, another messages comes up that says something to the effect of, "You can't disconnect because it is being used by another server at this time." So I click "OK" and then iTunes stays on for a few moments which gives me time to transfer a song or two, but then itunes crashes as soon as it finished transferring or before it finishes.
As anyone can imagine, this has really become a hugh problem. Having an iPod and not being able to use iTunes makes it very unhandy. I'm not able to add any new music or any of the playlists which i have been working on. Does anyone have a solution, or any suggestions as to what may be going on? It would be deeply appreciated.
I plan to restore my iPod in a day or two if I don't get a solution to this, but I don't have all of the music, videos, etc. that I have on the iPod since I removed much of it from iTunes to help the computer run faster. I had over 2000 items in the library, so it was pulling the pc down and it was taking forever to use the computer.
I am unable to use any of the software to transfer everything from my iPod to the iTunes library because of the problem with iTunes crashing when I connect the iPod, so this isn't a solution at this time.
Someone, please help!
HP Windows XP Using DSL for internet access

I suspect a hardware problem. But do the following to rule out a software problem:
- Reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Resore the iPid to factoery defaults/new iPod.
In the latter part of you post, I thin you ar sayng that you do not have a syning computer and the music is not on the computer. If so, do the following so you will not lose anthing (or very little) when you restore.
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Best iPod to PC
- Connect the iPod to the computer and right click on the iPod under Devices in iTunes and select Backup. This will make a backup so you can restore to the backup

PSE 11 crashes when I attempt to add a new catalog

PSE 11 crashes when I attempt to add a new catalog to those that already exist. No programs are running that might conflict with Organizer, and I can run other functions such as downloading photos from my camera. As soon as I attempt to add a new sub-catalog to an existing major catalog, the program crashes. I'm using Windows 7, and have tried various compatibilities, but none solves the problem. Any ideas?

expat31 wrote:
PSE 11 crashes when I attempt to add a new catalog to those that already exist. No programs are running that might conflict with Organizer, and I can run other functions such as downloading photos from my camera. As soon as I attempt to add a new sub-catalog to an existing major catalog, the program crashes. I'm using Windows 7, and have tried various compatibilities, but none solves the problem. Any ideas?
How do you attempt to 'add a new catalog' or a new 'sub-catalog' ?
There are no such things as 'sub-catalogs' or catalogs included in catalog.
Catalogs are totally independent storing systems, they ignore what is managed in other catalogs.That's why it is recommended to have only one catalog, unless you have a good reason to create several ones because they are totally independent by nature (home vs professional for instance).
You can create several levels of albums, of tags categories, but not with catalogs.

Skype Desktop crashes when it connects to the Inte...

Recently my Skype has updated to the newest version and since then it has crashed each time it connects to the internet. I have gone through other questions on this site and none that I have found have helped me.
As far as I am aware my Internet Explorer works fine, my drivers are up to date, my windows system is english and I have downloaded all optional and required system files. However, the only thing I have noticed is when I tried to visit https://apps.skype.com/home/ with IE I get the skype loading icon and the page never loads fully (But doesn't crash), not sure if that is relevent.
Skype for windows 8.1 works fine but the desktop version crashes. I have checked that I have allowed the program through my firewall and disabled and re-enabled .NET Framework 3.5 (Includes .Net 2.0 and 3.0) and run skype with it on and with it off and also ran programs to fix problems with the NET framework if it encountered any. Skype is still crashing when it connects to the internet.
I have also run Directx diagnostics tool and will attach the saved file.
Thank you for taking the time to read this and for any help you can provide
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏13 KB

Note: this is not an issue particular to FaceRig, there are quite a few other programs using virtual cams that are affected by the 7.0 upgrade in the same manner. There is however a potential solution.
We have talked with some of our users affected by this issue (this does not affect everyone doing the 7.0 update, just some) and we trust that we have found the solution (at least until we've had time to investigate some more).
Seems the problem to has to do with the default webcam settings (you just need to go though the Skype initial setup again).. The short version of the fix is:
1. Go to Steam Client and do a "remove local application data" on FaceRig
2. Go though the initial setup process on Skype ( now it won't crash) and/or visit the webcam setting menu and make sure everything is working and everything is updated.
3. Re-install facerig (skip reinstalling the open codecs if you already have them installed)
Now everything should be working.
I recommend reading the detailed step by step on the FaceRig Steam support forums:
http://steamcommunity.com/app/274920/discussions/ ( look for the Skype 7.0.0.102 pinned thread - i cqannot link directly that thread because there is a limit on the length of URL's here.)
PS: if you are the tinkering type, steps 1 and 3 can be simply substituted by un-registering and then re-registering the direct show filters ( all of them) for the FaceRig Virtual Cam ( .bat files are provided with facerig to do exactly just that) , but most folks do not want to mess with directly registering/unregistering DirectShow filters, so it is simpler to ask for an uninstall and a re-install.
Note that this kind of fix might also work for FFsplit.ax or other affected DirectShow filters too ( as this issue is not particular to FaceRig alone, more programs are affected by this update).

ITunes 7.0.2 crashes when I connect my iPod Nano

iTunes 7.0.2 crashes when I connect my iPod Nano. What can I do about this?
Thank you!

Try here. http://www.ehow.com/how_4882455_repair-corrupted-ipods.html
http://support.apple.com/kb/TS1405?viewlocale=en_US

My itunes is crashing when i connect my ipod

my itunes is crashing when i connect my ipod

Try the suggestions here > iTunes Freezes when ipod is connected: Apple Support Communities
Bonjour may be causing the problem.

PSE 6 Crashes when trying to print to Epson Stylus Photo 1400

Has anyone had an issue with PSE 6 crashing when trying to print a single photo from the Organizer? I have tried to print photos directly from the Organizer and each time I do, the application crashes. I can open the photo in the editor and print directly from the editor with no problems. It's not the printer becuase I can print from other applications to the printer. I can also print to my HP PSC 2355 with no issues. but for some reason, I cannot get the Organizer application to print to the Epson. I have uninstalled the printer and reinstalled it. I have checked to see if there are any updated drivers - there are none. I'm running PSE 6 on Windows Vista 32-bit. Any suggestions what else I can try? I hate that I cannot print to my new printer!

Try deselecting the print options "EXIF Print" and "Print Image Matching". Unfortunately, the Search function of the new forums doesn't work yet for older messages, but I did find this thread cached by Google referring to a similar problem:
http://74.125.93.104/search?q=cache:VUoPY8opoygJ:www.adobeforums.com/webx/.59b68b01+epson+ exif+print+site:adobeforums.com&cd=5&hl=en&ct=clnk&gl=us
(I find myself using Google more and more to search Adobe's site, unfortunately.)

Fcpx 10.1.4 crashes when iPhone 4s is connected to iMac

When I connect my iPhone 4S running the latest iOS 8.3 is connected to my 2014 iMac 27 running Yosemite 10.10.2 Final Cut Pro X 10.1.4 crashes. If I do successfully connect the phone, FCPX crashes when I attempt to import video from the iPhone. I have never successfully imported anything from my iPhone to FCPX. It's kind of a drag to shut down FCPX to import or download video direct to the iMac HDD and then import to FCPX, but it does work. Any suggestions?

I still have the trial 10.0.3 download, but unforunately can't run it because it's expired.
There's another guy here that seems to be having similar issues importing AVCHD (same as my GH2).
https://discussions.apple.com/message/18147371#18147371
I removed the problem media and was able to continue for awhile without it on my macbook air while I was away. Now that I'm back home on my 2009 era mac mini I have since imported more footage and encoutering the same thing on this system (also, unfortunately updated to 10.0.4). It was at a point where it'd crash everytime it opened. After a few times it wouldn't crash on opening, but I found that if I scrolled up through the clips in the event viewer, as soon as one particular one started to appear it would crash. The problem clips seem to probably be higher bit rate because they have more motion like steadicam or slider in front of moving trees.
There's stuff related to AVCHD in my crash reports. I looked inside the app package and saw this file. I compared it to the files inside the package from the trial and it's definately been updated. I haven't experimented yet, but I thought about trying to copy the old AVCHD plugin to the new version and see if it can handle my footage better, but I don't know what else breaks if it's expecting access to new features or something.
0x11a9f0000 -
0x11ac87fef com.apple.AVCHDPlugin (2.0.0 - 1014.5.29) <02B6EE1F-C8BA-EB46-14BE-17330045B3C8> /Applications/Final Cut Pro.app/Contents/PlugIns/RADPlugins/AVCHD.RADPlug/Contents/MacOS/AVCHD
I've got several saved, I can post the full thing, but I know nobody likes scrolling through it all.

ITunes Crashes When I Connect My iPhone 5S ???

When I launch iTunes it works fine, but when I connect my iPhone to iTunes suddenly it freezes and crashes saying "iTunes has stopped working". This is causing alot of problems. I have tried the following threads for help but nothing seems to work:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Im hoping there is someone who has had this problem and has overcome it and can help me out with what should be done ??
Thanks

<Reply to above poster Edited By Host>
The best thing I've found is to close itunes first and then disconnect your iphone. This seems to work for me with both version 7.3 and 7.3.1. Hope this helps.

Itunes crashes when I connect my iphone. Please Help I'm on my forth phone

I'm using a PC and I also updated to the newest itunes 7.3.1.
My problem is that when I connect my iphone to my PC itunes freezes and so does safari on my PC.
Is their a tread about this if so may you guys point me in the right derection.

<Reply to above poster Edited By Host>
The best thing I've found is to close itunes first and then disconnect your iphone. This seems to work for me with both version 7.3 and 7.3.1. Hope this helps.

Iphoto crash when i connect my iphone

My Iphoto keeps crashing when I conntect my Iphone to my computer. I'm trying to synch my pictures but the second my iphone shows up in iphoto it stops responding.

What version of iPhoto?
Post the first 50 lines of the crash log
LN

Laptop Crash when iPhone 3Gs is connected

Hi everyone,
I have a problem as per above..Details as per below:
1. When i first connect my laptop and iPhone, it works well.. but soon after few days without any synchronizing(which means few days of iPhone usage) , my laptop immeadiately goes into blue screen when i connect my iPhone to my laptop. The same problem occur until i disconnect / pull the USB cable away.
2. Thinking that this might be one off kind of problem, i reconnect after few hours and same things happen.
3. I send my laptop for checking and format after that.
4. I went back to Maxis Malaysia ( authorized iPhone 3G dealer in Malaysia ) to check and apparently all iPhone belongs to the tech guy cannot connect to this laptop. I was advised to check my drivers etc.
5. Drivers all checked and updated.
6. iPhone restored to factory setting via iTunes.
7. Voila, i can connect my iPhone and laptop after that.
8. 3 days into the-newly-restored-iPhone, the same problem occured again..
9. i have already disable my webcam and removed the software needed to use the webcam as i read it in forum but yet, same problem happen..
Seriously, this has been getting on my nerve and i need advise from fellow iPhone users.. I'm not too expert on those tech / IT stuffs .. I only know basic .. Would be great if someone can help me through this.
Merry Christmas and Happy New Year....
Thanks and Cheers,
Wilson Cheah
Malaysia.

Hi, I have this problem with certain model of Acer Notebook.
The cause is due to the camera drivers conflict between iphone and the one install on the PC.
to resolve there are 2 ways
1) remove the camera drivers from the PC
2) empty your camera roll in your iphone.
Hope this helps.
ahdoi

App crashes when not connected to wifi

Our dps app crashes on iphone and ipad(3) when not connected to wifi. I would expect a "you are not connected to the internet" error to appear, and then any previously downloaded issues to work, except for external links. Is this possible?
Thanks!

There was a hotfix for this put out just after V25.
Unfortunetly you have to rebuild your viewer and submit and update to Apple. From my experience they were very quick about approving the update because of the critical nature of the update even without putting in an expediated review request, but that was over a month ago.

Open iTunes when iPhone connected

The option in iTunes to allow iTunes to open automatically when iPhone is connected is greyed out and won't allow me to select it. Any ideas? My husband just upgraded to an iPhone 4, same computer, different login and iTunes account and his works as it should.

The only thing I can suggest at this point is to re-install itunes. No need to uninstall first, you can merely download the latest version & re-install over your present installation. Re-boot your computer & see it that fixes things.

PSE 6 - Downloader Crashes when iPhone connected

Similar Messages

Maybe you are looking for