PSE 6 Mac - Brush Spacing Option doesn't work

I just installed PSE 6 to my Mac. The Brush Spacing Option does not work. It will not allow me to enter a number into the space provided and does not have a cursor to drag. All of the options work like fade, hardness, and scatter. How do I make my spacing option work?

Do you have this problem with all brushes or just with some? Not every brush offers every option.

Similar Messages

  • How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

    How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

    It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
    Go to DISK UTILITY
    Choose the Hard Disk you intended
    ERASE
    You can choose either
              (I personally prefer this one, you know just in case)

  • Create a PDF from webpage using entire site option doesn't works

    OK, guys, this is the problem...
    After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
    I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
    My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
    Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
    If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
    Can someone help me?
    Thanks.

    Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly. 

  • Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

    In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

    I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
    The obvious way around this is to actually type what you want.
    The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

  • Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does...

    Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
    Details: OS X Yosemite 10.10
    Apple TV 3rd generation, version 7.0
    Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
    Who can help, please!

    I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
    I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
    I've booked a call with Apple Support for next Sunday to discuss the issue.
    If I get any useful info I will pass it on.

  • What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • Music App shuffle option doesn't work

    Stats: iPad 1, iOS 5.0.1
    Music App shuffle option doesn't work.  I have already reset the iPad, removed all my music and resynched.  Shuffle button is selectable, but just plays the songs in alphabetical order, even if I try to skip to another song or start anywhere on my playlist.
    So far this version of music player for apple product is disappointing, the iTunes app before never had these issues.  There are some serious bugs in this Music app, Apple your comback success was largely because of iPods and iTunes, so music is a big part of Apple users use, please fix this.

    Hello,
    Yes I believe this is a known bug in Firefox OS v1.0. [https://bugzilla.mozilla.org/show_bug.cgi?id=883781 Bug 883781].
    The bug is marked as resolved in Firefox OS v1.1. Once ZTE update the Open to v1.1 the bug will be fixed on your device.
    v1.1 of Firefox OS was officially released yesterday. Hopefully it won't be too long before it reaches the ZTE Open. See here for more details:
    [https://blog.mozilla.org/futurereleases/2013/10/09/firefox-os-update-1-1-adds-new-features-performance-improvements-and-additional-language-support/ Firefox OS Update (1.1)]
    I hope that helps.

  • Prompt option doesn't work

    Hi
    I have a 8703e and the DELETE ON: Prompt  option doesn't work.
    It show me only "delete/cancel" with out the option to choise from where i want to do that
    I have only one account email from a Lotus Notes Server 8
    Any recommendation? thank you so much for read me  
    Solved!
    Go to Solution.

    HI and thank you for your email.. yes we are using a blackberry enterprise server ... but anyway
    I was trying a lot of differents methods without success. Finally I found a solution.
    This is the recets:
    1) Create a backup from the desktop software at desk's client
    2) Wipe the blackberry device
    3) Re-install the account in the blackberry device
    4) Restore the backup from the desktop software.. but PreAttetion here!! in Advance way... one by one the differents option from the checklist... because When I was trying to do a complete restore (all in the same time) the problem were the same
    I don't know if there is another best solution.. but in this case It was fine.
    Eduardo A. Pinetti

  • My mouse fell now the scroll/zoom option doesn't work. Any tips?

    My mouse fell from the couch to a carpeted floor. Now the scroll/zoom option doesn't work. Any tips? It landed and rolled a bit.

    Hello:
    I suggest you buy a new one.
    Barry

  • Mac Pro - Holding option doesn't display startup manager

    I have a late 2008 Mac Pro, Ive been running OSX 10.8.5 and Mavericks (on separate partitions). Now out of nowhere holding down option doesn't bring up my startup manager. I can access both OS's by changing the startup disk in system preferences, but I'd love to get the startup manager fixed.
    I have tried reseting the SMC (by unplugging it for like a minute) and resetting the PRAM/ NVRAM by holding down Command + Option + R + P; however resting the PRAM doesn't seem to be working. The startup chime happens once and then after about thirty seconds it boots into the recovery partition.
    Thanks in advance!

    I had this problem with my 2009 Mac Pro with OS X Yosemite. The problem was fixed for me after removing two of my ram sticks, resetting the PRAM three times in a row (wait to hear chime, then wait for restart, do this three times) and booting up. There are some additional firmware settings that are reset when you remove ram. I replaced the ram, and now my startup disk menu always appears. Googling "how to reset firmware password on mac pro" will give you solutions that also solve the missing startup manager problem. Best of luck to you!

  • How can you turn off the spell checker in Firefox? (The menu option doesn't work.)

    There was a solution to this I came across a long time ago, but I don't remember what it was. I want to turn off my spell checker in Firefox. The usual instructions given for doing this are to go into Options->Advanced and de-select "Check my spelling as I type". This doesn't work. Period. And this is a bug that has been around for a long time in Firefox.
    What's a way to disable this? I don't like seeing a bunch of red lines under correctly spelled words that just happen to not be in Firefox's default dictionary, and I don't want to have to add things to my dictionary either.

    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

  • I just updated my Mac Pro and it doesn't work

    The screen only has the apple icon and it doesn't work. Any thoughts? Ive restarted it twice (force quit) . Help?

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    1. Intel-based Macs: Resetting the System Management Controller (SMC).
    2. Repair the Hard Drive and Permissions - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    3. Re-download and reinstall Mavericks.
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • The privacy option doesn't work in 5.0: There's no notification given when multiple tabs are closed.

    The privacy option in 5.0 doesn't work.
    When exiting Firefox with multiple tabs open, no notification is given...
    How can I go back to Firefox 4?
    I had the google toolbar when I had firefox 4... I upgraded to 5.0 and it still works... My friend tried to load it and it doesn't work.

    ''The privacy option in 5.0 doesn't work.''
    Do you mean that Privacy options can't be accessed in the Options dialog, or Private Browsing doesn't work??
    Could you test with a new profile to see whether the update might have caused a settings problem, or you have an incompatible add-on?
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, close Firefox and fire up the Profile Manager to create a new profile: [https://support.mozilla.com/kb/Managing+profiles Managing profiles].
    If that work, you can migrate your bookmarks, saved passwords, and other key settings to the new profile, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • Mac app store still doesn't work properly

    Hi any concern,
    Thank you before,has been almost 3 week.Yesterday I did Re-install OS X take almost 20 hours and then restart automatic around 6 am.But still when I click (update),(Install),(get) or any buttons doesn't work at all this happen on Mac App Store.On ITunes was Ok.I check on Console:
    4/17/15 7:31:08.503 PM com.apple.WebKit.WebContent[567]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").addClassName')", url:"https://se.itunes.apple.com/htmlResources/2A05/da-storefront-autoinstallations.j s", lineNumber:"376"}
    4/17/15 7:31:14.489 PM com.apple.WebKit.WebContent[567]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").addClassName')", url:"https://se.itunes.apple.com/htmlResources/2A05/da-storefront-autoinstallations.j s", lineNumber:"376"}
    4/17/15 7:34:16.802 PM Final Cut Pro Trial[576]: The function `CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
    4/17/15 7:35:18.194 PM WindowServer[89]: Warning: Program "Dock" posted a mouse-down, blocking hardware events, but did no further mouse activity.
    Please any idea?.Thank you

    I have followed the other discussions and done the suggested updates or deletes and to no avail.
    Unless you tell us exactly what you have tried, we have no way of knowing exactly which updates or deletes? aren't working for you.
    Try installing the combo >  Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after the combo is installed, try the App Store.

  • MP3 encoder VBR Options doesn't work anymore

    Hi everyone !
    I always used iTunes mp3 encoder to rip my CD's with the VBR option ON and it worked fine until now.
    Indeed since 10.3 the VBR option doesn't seem to be working no more : the output is a CBR mp3 file either I tick or not the VBR option box !
    Does anyone have the same problem ? Is there a way to solve this issue ?
    Thank you

    We can't know. You have not provided any system info or other useful technical details.
    Mylenium

Maybe you are looking for