PSE 6 slideshow output problems

I created a large slideshow in PE6. The output is unsharp. I then bought Premeire Elements and the output is even worse.
Is it because of the high resolution of the photos?
If so, is there any way to change the resolution after the fact?
I have tried burning it to both cd, and dvd and I don't know where to go with it from here.

What I do is create the output as an image file (.wmv) at the highest resolution. This will take some time if the slide show is large. Then I use DVD burning software like Nero to convert the .wmv file to a dvd. This gives me pretty good resolution on my HDTV - I think if I buy a Blu-Ray player it will upconvert and give me really good quality.

Similar Messages

PSE 3 - Slideshow audio problem

Hi,
Hope someone could help with an issue I am encountering when trying to create a slideshow I'm trying to get together for the good lady wifes pending 40th.
I'm running PSE 3 on Windows XP and a Siemens Amilo Laptop.
Problem I'm having is that the audio isn't playing when I'm previewing the slide show??
It had been working fine but now seems not to come on at all, however strangely if I play the audio in the 'edit audio' dialoge box it comes on fine???
Growing increasingly frustrated at it and ready for throwing the thing off the wall!!
I'm a bit of a newbie at this so hope someone can help??
Cheers
Gerry

Dear SD Mac User,
Here is the update to the audio slideshow problem. I tried many
different things, such as changing the settings, and using a
different hard drive with iDVD installed on it. Norhing
worked, and i did want to keep the
107 or so jpegs.
But, just for the heck of it, I did YOUR suggestion, and wittled it
down to 99 jpegs, and burned it. Guess what, it actually worked!
No silent Nixon audio mysteriously erased!
Thanks for your help as I finally got this project out! A Happy ending!
Have you ever had this 99 jegs experience before, or was it guess?
Either way, thanks again,
I guess the program freaks if more than 99 jpegs are used!
VideoGuru
Quicksilver dual processor 800 Mac OS X (10.4.8)
Quicksilver dual processor 800 Mac OS X (10.4.8)
Quicksilver dual processor 800 Mac OS X (10.4.8) iDVD 6

Macbook mini DVI to DVI output problems

hi
I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
sorry for the long winded post, really wanna know what the problem is here

Hi cbeth,
welcome to macbook forum.
For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
Also reset your PRAM and PMU.
Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
Good Luck.

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Delimited output problem at the time of writing in to text file

Hi ,
I am using matrix stayle design for my reports when i am generating reports in delimited format i am getting Delimited output problem(DR.Watson ERROR) at the time of writing in to textfile.

Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11.
Thanks
Oracle Reports Team

PSE 7 Pen pressure problem

I have been using a Bamboo tablet and PSE 7 with no problems until recently. I just purchased and set up a Cintiq 21ux DTK2100 as a secondary monitor. I updated the latest driver directly from Wacom. Now when I use PSE, pen pressure wont work the way that it used to on the line thickness. The pressure I put on the pen will vary the opacity of my lines but not the thickness of the line even though I have Size and Opacity checked off. What do I have to do? Please help.

I'll continue trying different drivers, but it looks like this is a Photoshop issue to me.
Clearly, the tablet doesn't lose sensitivity when I'm working in either Adobe Flash or Paint Tool SAI. I've sadly had to turn to Paint Tool SAI to work around this problem. I'd much prefer to use Photoshop, with which I have the bulk of my experience. I purchased Photoshop CS5 for my Mac.
Since my Mac has been starting to give me trouble, I've been working on my PC. I was hoping to upgrade my version of Photoshop, but if this product isn't going to work the way it should, I'm just not going to purchase it.
I understand this is frustrating, but, from my perspective it's clearly an issue inherent to Photoshop. My tablet drivers work fine in other programs that use pressure sensitivity. The artifacting seems above only occurs in Photoshop.
Is there a way I could try previous versions of Photoshop in order to see if, perhaps, it's CS6 that doesn't like my tablet?
Again, I'm sorry if I sound critical, but I'm frustrated. Just really want Photoshop to behave like it should.
Thanks again Chris,
~Rob

PsE 9 auto-analysis problems

PsE 9 is having problems when attempting to auto-analyze photos. The catalog I am working with is one created in PsE 8 and converted to PsE 9. No converson errors were reported. The catalog is about 91 MB is size and contains 16000 photos and a couple thousand video clips.
These are my Media-Analysis preference options...
     (enabled) Analyze Photos for People Automatically
     (enabled) Analyze Media for Smart Tags Automatically
     (enabled) All filters
     (disabled) Run Analyzer on System Startup
     (disabled) Run Analyzer only when System is Idle
Analysis will stop after it has processed what seems a random count of photos. I can monitor the progress by hovering the mouse over the purple tag on the bottom of the Organizer screen. I know there is an issue when the same photo is processed for more than the normal amount of time. Normally the photos are processed at more than one per second. I have waited for up to 10 minutes to process the same photo..
The ElementsAutoAnalyzer.exe process exists in the Windows Task Manager. However the CPU utilization is at 0% when analysis is stalled.
Attempting to manually analyze a photo will result in a progress dialog to pop up and either it will show zero progress and hang or stop at 71%. I need to exit the Organzer, kill ElementsAutoAnalyzer.exe, and then restart the Organizer to get it to work again. But then it starts analyzing from the beginning again and then stops after some time.
It looks like there is a memory leak in ElementsAutoAnalyzer.exe. The VM starts at ~54 MB and keeps on growing with every processed photo. The size increases about 1 MB per second (about 15 photos).   The organizer stops showing progress after the ElementsAutoAnalyzer.exe VM size reaches around 1.7 GB.

I'm trying to use the advertised feature to help me narrow down issues with photos. I've already got too many of them. I will take any help from an automatic tool by showing potential issues with photos. I can be the final judge if a photo is out of focus or is too dark. My plan is to filter by Blur for example. Then I can quickly assess all photos for this and remove photos that are clearly not desirable.
Many of the issues pointed out by John Rellis can be resolved by making your media read-only.
The large amount of CPU times issue point out by John looks like was resolved in PsE/PrE 9 by the new 'Run Analyzer only when System is idle".
I also use this for videos. The scene detect is great and helps me pick out clips as I am assembling my videos.
I had the impression that Adobe cleaned up some of the auto-analysis features with PrE 9 so that more people could take advantage of it, like I would like to.

PSE 9 Image edit problem

I have recently upgraded to PSE 9 on my iMac having used PSE 6 without any problems for a while. PSE 9 does everything well except cropping. When I use the crop tool then select the green tick to complete the crop the image "disappears". When I say disappears I mean it shows as a size of 0.04cm x 0.04cm. Any effort I do to resize it back to something original has no effect. Any suggestions on what I might be doing wrong? I haven't seen any mention of this on the Forums so I am assuming it is not a bug with PSE 9....or is it?

The first thing you need to try is clicking on the dropdown menu at the far left of the options toolbar and select Reset tool. If this doesn't work, it might be that the preferences file has corrupted during the upgrade. You will need to reset it by holding Cmd, Opt and Shift when you launch the editor from the welcome screen.

PSE 9 encountered a problem and needs to close

A few hours ago I posted the following: I have been using PSE 5 for years but all of a sudden when I try to open multiple files "could not complete the open command because of a program error" appears. I have reformatted my computer and reinstalled all programs & updates but still get the error. I am trying to access photo files in a specific, user created, directory on my computer; the funny thing is that if I access files in the My Documents\My pictures\ Sample pictures folder I am able to open all the files. Any and all help or suggestions are welcome. Thanks
Since then I downloaded & installed the trial version of PSE 9 but when I try to open multiple files I get an error message to the effect that PSE has encountered a problem and needs to close. HELP!

You might need to restart the Apple Mobile Device Service.
Read this: http://support.apple.com/kb/TS1567

Premiere Elements 12 output problem

I am having problems outputting my project. Different errors messages. One says transcoding error. Another time it says export error. Other times it crashes. And then the program won't even open.
Any suggestions?
bwatson9

Steve,
First, thank you for your prompt response. This is the first time I have used Premiere Elements 12. I don't seem to have a manual for the software.
The product was bought with my new computer. I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz. I have 12 GB of installed RAM. I have 1TB hard drive of which this is the first project I done.
I have checked to make sure that I am getting all Windows and Microsoft Updates. I even manually went to Windows Update and installed the optional updates.
The project is a 20 min. video using mostly photos and 2 small video clips. The project is saved in its own folder.
When I go to the timeline in Expert view I do see an orange-yellow line above the timeline. It runs the whole length of the project.
I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels. I will check that and reduce their size. Is there anything else that I need to do?
Where can I find a manual?
Thanks,
bwatson9
Date: Sun, 23 Mar 2014 06:31:03 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Elements 12 output problem
    Re: Premiere Elements 12 output problem
    created by Steve Grisetti in Premiere Elements - View the full discussion
A lot depends on a lot.
What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
When did you last run Disk Cleanup and Disk Defragmenter?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

PSE/PRE 11 Signin Problem

David,
I have an Adobe Photoshop Elements 11 and Adobe Premiere Elements 11
dilemma.
I recently received a birthday gift of both software programs.
Following Adobe instructions, I attempted to use Adobe Download Assistant.
It rejected my input with the following notation:
"This e-mail address is already in use. Please use a different e-mail
address."
How can I use a different address? [removed by forum host] is the only account I have used for 20 years.
Previously, I have had some contact with Adobe. Never have I had any
trouble.
As I am anxious to use both Photoshop Elements 11 and Premiere Elements 11,
I would greatly appreciate any assistance you might have to offer.
John F. Jackson
[signature removed by forum host]

David,
Thank you for your kind assistance.
I really appreciate all you are attempting to do for me.
John
In a message dated 12/11/2012 3:28:46 P.M. Eastern Standard Time,
[email protected] writes:
Re: PSE/PRE 11 Signin Problem
created by David Kastendick (http://forums.adobe.com/people/dave_m_k)
in Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/4913303#4913303)

Graphic output problems in most programs - triangles ...

- often at scrolling in the Finder
- it appears spontaniously and dissappers/flicker if mouse is moving ...
- in some programs it is permanent for example 3D Coat
- different often and strong in different programs - in some there is no problem (5% - for example ZBrush)
- Mountain Lion does not fix it - only some changes - for example Quicktime (not Fullscreen) a big triangle in the down left
- little greeen/red pionts, like defect Pixels, in little groups are appearing too! - Photoshop, Final Cut Video Output...

A screenshot give you a copy of what is actually sitting in the screen buffer.
So this is not an "output" problem. That stuff has been messed up in the screen buffer.
to draw the mouse cursor, the area around the pointer must be re-constructed. That is why moving the mouse cursor seems to "repair" it.

Print Output problem in ECC6

Hi Friends,
I am getting print output problem in ECC6.
In VF03 I am giving issue output for invoice printing. Whenever I am presseing issue output one screen is coming for selecting output type. I have selected one output type and I pressed print preview then in print preview one item and corresponding amounts it is showing properly for the first time. But the problem is after the print preview if I come back and again if i press print preview button values are not getting refreshed and same item is repeated for twice and the amounts are also getting added. Again for the third time if i come back and again if i press print preview one more item is getting repeated and the amounts are also getting added which should not suppose to happen.
What could be the problem and how to resolve it?
Rewarded,
Steve

Hi,
clear those variables in the program .
Regards,
Bharat.
Reward points if helpful

J Option Pane Output Problem

Hi guys,
I am new to Java and I am having trouble compiling this program via which I can calculate the number of months to pay off a loan.
I am not sure why it is not compiling and would really appreciate some solutions or suggestions
Thanks a lot.
import javax.swing.JOptionPane;
public class Final
public static void main(String[] args)
String LoanAmount;
String Months;
String AnnualInterestRate;
String MonthlyPayments;
double balance;
double interest;
double payment;
int months=1;
LoanAmount=JOptionPane.showInputDialog("Enter Loan Amount:");
AnnualInterestRate=JOptionPane.showInputDialog("Enter Interest Rate:");
MonthlyPayments=JOptionPane.showInputDialog("Monthly Payments:");
balance=Double.parseDouble(LoanAmount);
interest=Double.parseDouble(AnnualInterestRate);
payment=Double.parseDouble(MonthlyPayments);
months=Integer.parseInt(Months);
while (balance>0)
{balance=(balance+(interest/12)*(balance))-payment;
months=months+1;
JOptionPane.showMessageDialog(null, "Number of Months ", +months);
Edited by: Java1001 on Sep 15, 2009 11:45 PM

A: J Option Pane Output Problem

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
You are passing 3 parameters -- a null, a String and an int -- to the JOptionPane#showMessageDialog method. In the [_API_|http://java.sun.com/javase/6/docs/api/javax/swing/JOptionPane.html], do you find a variant of this method that accepts these three parameters?
db

PE Slideshow output closes at 42% with error message

I created a slideshow in the Organizer this summer from my PE 7.0 and it worked great. Now, I'm trying to do a new slideshow and when I output the file whether to a disc or as a file, it stops at 42% with a Microsoft Error message that the program has to close. I've been searching answers on internet but haven't found anything specific. Anywone have any ideas for me?

Note: my most important comment and question is near the end and has 3 asterisks in front of it.
I did have some formatting problems when adding my new comments so the color designating your responses is lost and the formatting may be weird, but I don't think that will prevent our discussion from continuing.
-- how many photos (approximate number is OK)
72
-- resolution of the photos (for example are they from a 5 megapixel camera or a 12 megapixel camers)
10 mg pixel camera
-- what file format - like jpeg or psd or tiff or a camera RAW,
camera RAW probably
..... did your previous successful slideshow also use raw format files? I have never done that and I don't know how many other people do. What camera took these photos and what is the file type of the file?
-- did you add any type of video file to this slideshow and if yes, what type of video,
None
-- how much available free space on your system drive (probably your C drive)and if you set Windows parameters to re-direct Temporary files to another drive also post free space on that drive.
123 GB on hard drive and 588 GB on external hard dirve. I have the scratch disk to operate from both of these in the prefs menu in PE
.... in my question I had actually meant Windows temporary files rather than PSE scratch disks, but with your numbers for available space you should be OK
-- which Windows Operating System,
Windows XP
-- did you add a music file and if yes what type and what was its source,
Yes, on music, 2 songs. Orignally from I-tunes but ripped into Windows Media Player to mp3 format.
Is the postition where it stops anywhere near where one song stops and the other begins?
It seems to work great until it gets to about picture 50 and it stops...must be the 42% mark.
..... the fact that you have isolated the specific picture at which it stops is good.
That 42% number might be meaningfull or not as many percentage complete numbers are really estimates rather than precise numbers.
***.... did you actually get a partial output file and is that how you identified which photo?
Perhaps it is the photo after what you see that causes a problem or the timing of the music if that changes near this point

PSE 6 slideshow output problems

Similar Messages

Maybe you are looking for