PSE 6 - Windows Vista - "Online Services encountered an error. The service will now be terminated or
I have been uploading photos to SmugMug for a while. yesterday I started getting the following error:
"Online Services encountered an error. The service will now be terminated or paused if possible. (Error7: NULL==*inAttributes)"
I started getting errors yesterday. I was uploading and kept getting errors I finally got this error message. I have tried uninstalling and reinstalling the software an am still getting the same error.
I am running the software on an HP Pavilion 9600 Running Windows Vista.
Windows Vista Home Premium - SP 1
AMD Turion 64 Processor
3.75 MB Ram
Operating System: Windows Vista
Browser: Mozilla
Printer model / driver version: Canon Pixma IP4500
Video display card / driver version: No Idea
Scanner / driver version: N/A
Type of network (server type and protocol for connection): No Idea
Has it ever worked? If so, what's changed? (provide comments in description field): No
Same results with different file?: Yes
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: No
Anyone know what is causing this and (more importantly) how to resolve it?
Thanks!
djb
Don,
I recommend that you look at
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Reset_the_Organizers
You may need to scroll down to the choice for
b Reset the Organizer's online-services state
if the link does not directly take you to that specific entry
Because you reported that you had a failure in a previous online service attempt I think it is very probable that you need to reset the online services.
FYI - Uninstalling and reinstalling does not reset these user related parameters
Similar Messages
-
Online Services encountered an error
When attempting to Publish a 40 min video to Adobe Revel from Adobe Premiere Version 12.1 I receive an error message "Online Services encountered an error" popup window when attempting to finish the last 5 seconds during the "Upload" process.
I have attempted to Publish this video for two days making six different attempts with the same error.
I have published other video using the same process in the past.
Background and steps taken
Annual unlimited Revel member
Re-booted PC - did not help
Below are screen shots taken
Attempted BOTH by Cancel and ran the entire process (over and hour)
AND "Try again and resumed Upload"
Resulted in same error message always during the last 5 seconds of the uploading process
javascript:;
Message was edited by: Bruce Herz Update: Tested Publishing to Adobe Revel with a small 30 sec video using the same PC and process. Worked as expected
Message was edited by: Bruce Herz
Attempted to Publish full length 40 min video again on 6/30/14 , still same error message
Published to DVD works as expected.
But, still have to publish to Adobe Revel .Sorry to say the issue continues, in spite of the last successful upload of a previous small video.
It seems that the direct upload from Premier 12 to Revel works fine for small video. But when attempting a larger on (over 40 min)
It continues to fail in the last few min of the upload process.
The same large video can be rendered on local PC as a movie and then uploaded to Revel from the browser.
I am using the same account 0374451202 and the email address used for this forum.
Thanks -
I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco. I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible. 7: NULL ==*in Attributes." How do I get the online services back and running on my PS to allow me to have my photos processed by Costco online?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name: Security
Source: Microsoft-Windows-Eventlog
Date: 1/15/2015 11:12:39 AM
Event ID: 1108
Task Category: Event processing
Level: Error
Keywords: Audit Success
User: N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2....Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time. -
Adobe Premier 10 - Online Services encountered an error.
HELP
For about 4 or 5 days I have been able to Share to Facebook my little videos Via the Online Facebook built into Premier 10.
After some permission problems things started working and I was able to post a couple of video that I made
directly out of premier over a period of several days.
Today when I tried to post an error was returned "Online Services encountered an error. . . . . "
I had not even re-booted my system nothing had changed. I have tried to post a video that I had
already posted, same error. Went to facebook and removed permissions for Adobe to access my
account, thinking that maybe this would cause a re-set of some kind, but alas no, same error.
If I try to post to you tube the program gets to a user name password screen, but I don't have an account there.
Shut down by firewall, but same error.
Anyone have any ideas.
Is there a format that I can produce and then manualy upload that would work as well?
DaveWith nothing changed at your end it is most likely a problem at Facebooks end. Try again later and see if it works again.
To manually upload follow the suggestions in the FAQ : How can I get the best quality on YouTube?
Cheers,
Neale
Insanity is hereditary, you get it from your children -
Online Services encountered an error. Error 6: SOAP fault
We run APSE 3.2 and we get the following error when we try to share our photos online;
Online Services encountered an error.
The service will now be terminated or paused if possible.
(Error 6: SOAP fault)
Everything seemed to run ok for about a month and than bang SOAP Error 6
We did not install any additional applications since we have installed APSE!!??
We do not run application based firewall - we only have the statefull XP FW Enabled.
Any help would be greatly appreciated.
Best regards,
Bob L.Bob:
Try this:
In Starter Edition, go to Preferences, and then click on Photoshop Services.
Then, click on Reset Services
Then click on OK to close the preferences panel.
Then, quit and restart Starter Edition.
It should work.
Let us know how it goes.
Bob -
When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?
Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ??? -
BO 4.0 Advanced Analysis for OLAP - The MDAS service encountered an error.
Hi guru's,
We are running BO 4.0 SP02 Patch 11 with SAP BW 7 and experiencing the following error with Advanced Analysis for OLAP:
"Analysis edition for OLAP
The MDAS service encountered an error."
After you click show details:
"com.crystaldecisions.thirdparty.org.omg.CORBA.MARSHAL minor code: 0x0 completed: No"
I have researched into this and found forums such as:
http://forums.sdn.sap.com/thread.jspa?threadID=2053481
SAP KB 1560100 - BI4.0 Advanced Analysis Web problem: The MDAS Service encountered an error
SAP KB 1661163 - An error is generated when selecting a query or cube in Analysis for OLAP: Error 15
However, none of these have helped our situation too much.
We have rebuilt the windows server 2008 R2 recently, hence the process we followed was a fresh install of BO 4.0 SP02 platform & tools, and then patch 11 on top of these.
Crystal, WEBI's (using the same BICS connections as the AA's) and Dashboards are all working as per expected.
The errors are for every AA including ones with only 2 variable selections (light queries) to ones with many more. Hence it is platform wide for Advanced Analysis.
I have also tried creating new AA using existing BICS, new BICS existing AA, new BICS new AA all with no luck.
We have also created new Adaptive Processing Servers with only the MDAS as a common service, turned on tracing etc but nothing springs to us as to what is going wrong.
Any ideas would be greatly appreciated?
Thanks all,Hi All,
After conversing with SAP support technicians we have found what is causing this issue.
On the windows servers we have the following installed locally:
- BO platform 4.0 SP02
- BO platform 4.0 SP02 patch 11
- BO client tools 4.0 SP02
- BO client tools 4.0 SP02 patch 11
- Crystal reports 2011 SP02
- Crystal reports 2011 SP02 patch 11
- Crystal reports for Ent SP02
- Crystal reports for Ent SP02 patch 11
It seems that the crystal reports 2011 or cr for Ent was causing an issue in the .WAR files that BOE uses to run Advanced Analysis for OLAP.
After uninstalling the two crystal products and removing any left over cr files in program files on the server, AA for OLAP works successfully in our environment.
The other point after this was i stopped the tomcat and SIA, i renamed the BOE folder under <install dir>\SAP BO4.0\Tomcat6\webapps and restarted the tomcat and then the SIA. In 4.0 when the tomcat is started again it will go and recreate the BOE folder from the BO directories effectively recreating the apps .WAR files under the webapps\BOE folder.
SAP will hopefully document this issue for other clients.
Cheers, -
The event logging service encountered an error (res=5) ...
Hi,
I have promoted a new server to be a third DC.
All seems ok, replication, dns, etc are working properly but after the boot in the system event log I see those errors:
Log Name: System
Source: Microsoft-Windows-Eventlog
Date: 25.5.2012 14:32:15
Event ID: 23
Task Category: Service startup
Level: Error
Keywords: Service availability
User: LOCAL SERVICE
Computer: dc3.x.x
Description:
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-API-Tracing/Operational.
and then for about 40 Microsoft channels:
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppID/Operational.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppLocker/EXE and DLL.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppLocker/MSI and Script.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-Audio/CaptureMonitor.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-Security-Configuration-Wizard/Operational.
etc...
There is no error event before those event id 23
Any idea?
Thank youHave you checked the path of the System event log? Something similar happened to me once, turned out the log file was corrupted. I updated the path and created a new evt which solved the issue for me.
Hopefully this helps:
http://technet.microsoft.com/en-us/library/dd315662(v=ws.10).aspx -
We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support -
My installation for Photoshop Elements 12 Failed. I have Windows Vista. I get an error message stating:installer failed to initialize. Please help!!
Error "Installer Failed to Initialize" | Install desktop application | Windows
-
Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise
Please help me about a issue of TMG 2010:
My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
then start it again. Check for related error messages."
and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
installed application filters and restart the service."
I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
i have try update windows and TMG latest but can not solved this issue.
i hope everyone help me as soon as. thank you so much.
HI Luis,
Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
Disable
Antivirus
Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
Try -
http://support.microsoft.com/kb/2649961
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
Ensure you have enough space for Log to be stored -
The MDAS service encountered an error.
Hi Experts,
I have a BEx Query. On this I have created an Analysis Work Space in BO. I have one system for both (Dev & QA) in BO.
The Analysis Work Space query is executing without error in BO Dev, but it is throwing below error for QA query:
The MDAS service encountered an error.
Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid. : com.businessobjects.multidimensional.services.MdasRuntimeException: Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid.
I have gone through so many SDN topics related to this. But couldn't get much info on this.
Note: The query doesn't have any calculation.
Please suggest.
Best Regards,
NiranjanHi Niranjan,
BW is throwing this error most probably, you might need to check bw side.
This might help you Warning eye(007) - Authorization error in webi report -
I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I am using Windows 7, 64 bit, Adobe 8.1 Professional, ActivClient Agent, with CAC card
Trying to sign a document digitally however I keep getting : The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497
-I have tried by deleting my certificates off the computer and reinstalling, this did not help.
-I have tried rebooting the computer, this did not help.
-I google the error message and can't locate any step by step instructions to fix this problem.
Could use some assistance. Please do not assume I'm top of line knowledgeable in Adobe when giving me a fix. That is the reason I am looking for step by step instructions. Thanks.
Navy ChiefHi Chief Mendenhall,
It's really a Microsoft error, not a Acrobat error, but I know that doesn't make the inability to sign any less frustrating. This probably has something to do with the communication bridge between Acrobat, Windows, and the CAC software. I know you're not responsible for software upgrades, but is there any chance you can download the free Adobe Reader (Adobe Reader Install for all versions). Even though Reader doesn't have the same editing capability as Acrobat Pro, it will allow you to sign a PDF file, and what I'm looking to see is if this is somehow related to the age of version 8.1, which is well past its end-of life. Even version 9 in longer supported.
Thanks,
Steve
Maybe you are looking for
-
I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process started, left it overnight and it came up with an error if continue you will loose all your data. So
-
IPad Air no connection popups every time
My iPad Air is frequently giving me a no connection or network required popup whenever I turn it on, and throughout usage whenever I switch to one app or another. Each app will have their own no connection popup or message. If I tap okay everything i
-
Satellite L300-1AM - Where can I get drivers for Windows 7?
How in the title From where can I download drivers for Windows 7 RTM (32bit) for Toshiba Satellite L300-1AM? Is it possible anyway? I see on the website only drivers for Vista/XP/OS independent. Which of them are compability with Win7? Thanks for you
-
i'm just having trouble buying apps on the app store
-
Could someone possibly point me in the right direction for setting up VoIP on the N97 please? I have been using an N95 8GB with several SIP profiles (Voipfone, Sipgate, coms.com) and all have worked well. I have found the SIP settings in the N97 and