PSE 7(edit) not working

I use Windows Vista and PSE 7.
Recently when trying to open PSE 7(edit) I get a message that Adobe PSE(edit) has stopped working. It also states that " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Look in the Window Event Logs to see if they have more specific information: Start...Contol Panel...Administrative Tools...Event Viewer. In the Event Viewer window, expand the "Windows Logs" folder in the left panel and select the "Application" log. Look for any event with a red icon that refers to Photoshop Elements.
Post the event's message here.
Ken

Similar Messages

Fix or Edit not working in Elements 9 - help

Hi Everyone,
I'm new to Elements so am not sure if I'm doing something wrong or if my program is not working properly. I downloaded PSE 9 last week and went in last night to open up some raw files (my first attempt at shooting raw). I had no problem getting them into the organiser and the first photo I went into Fix and selected Edit full and it opened up the editing program no problem. However, after I closed the photo I couldn't get back in to the edit mode (no matter which photo I tried). If I got out of Elements and went back in and try to select edit from the home page Elements closed down on me.
I found that if I restarted my computer I could then get into the edit section with no problem but the same thing happened - I could only go in and work on one photo and when I closed that photo I couldn't get back in. I minimised all my open files and program in case it was lurking somewhere on my desktop behind everything but no luck. Had to restart my computer again.
What am I doing wrong!!!??
Any help would be greatly appreciated.
Wendy.

That's really more of a Photoshop Elements problem, Wendy.
This is the Premiere Elements forum.

In browser editing not working on some sites

Hi. A client of mine wants to use in browser editing for a site I created in Muse CC 2014 so I tried to test it out. I log in successfully to In Browser Editing but nothing on the site is editable. When I log in to my own site through in browser editing it works exactly as it should so I am really puzzled. Both sites were created in Muse CC 2014 and constructed in similar ways. The only difference I can think of it that they are hosted by different companies:
My site - IBE works - hosted by GoDaddy - Q Services Design - Home
Problem site - IBE doesn't work - hosted by Network Solutions - Batesville Civic Center - Home
BTW, the site I am having problems with uses a web-safe font (Arial) so that shouldn't be an issue.
Any suggestions? Any input would be greatly appreciated as I sold this site to the client based on the in browser editing capability.
FionaQ

I just logged in to my "problem site" to take a screenshot and it is now editable. I'm not sure what was going on earlier as I logged in and out a few times and never could edit … But all is well. Hopefully this was just one of those glitches. FYI the browser I was using when it didn't work (and when it did) was Safari 6.1.6.
Thanks for your speedy help.
Fiona

Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

In-browser editing not working enabled

I am attempting to give access to customer in-browsing capabilities for basic updates to website content. SIte is BC hosted and built with Muse. In-browser editing in site properties and even in the admin details. If not possible, what options will work to allow client access to edit site without having access to computer with original files on it?

Found it was not working in Chrome. Used different browser and works fine.
Gabriel Guel
Principal Associate
702.523.4970
Skype: guelassociates
Text Messaging: [email protected]

PSE 7 Editor Not Working

My editor is not working. When I try to open, window comes up inside editor screen and says "Adobe Photoshop Editor has Stopped Working" This has never happened and the organizer is still working. Help someone!!!

The editor prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it.
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

Raw editing not working

Leopard 1.5.2 and all other current updates installed as of February 12, 2008. Macbook white April 2007 no other problems. I have imported some raw images from a Nikon D80. They show in the iPhoto events browser but when I try to edit them all the menu options along the bottom of the iPhoto window are greyed out. Edit, Enhance, Rotate, Crop, Straighten, all of them. Full screen works but again, those options are greyed out. All works fine with jpg files. I have rebuilt the databases by starting iPhoto with Command-Option without any improvement.
Any ideas?

Welcome to the Apple Discussions. Is this the first time you've tried to edit a D80 raw file? You might try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try the edit again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Save as un-editable not working

Hi,
I need to protect my content. I have used makerefmovie and I have chmod the directory to be safe from listing. I would love to use the script from Apple that makes the master file un-editable, however it seems to not work now. It runs and then the movie vanishes without trace and error an message appears saying the script failed as the movie was in use.
I have 10.6.4 and latest QT Pro. Any suggestions?
Thanks
Michael

I'm willing to send this file to any Mac user running QT 7.
Just email (screen name left @mac.com) me for an updated version.
It works and is a pretty powerful deterrent to video "theft". Not that it is foolproof (it can be "hacked" using HexEdit) but it helps keep the honest people from saving your files.
It's like a lock on a glass door. And many users have screen capture tools (I use SnapzProX) that can record anything I view on my Mac.

SQL Window Text Edits Not Working

I've been using SQL Developer 1.5.1 for some time now and it has worked great. Just recently, I'm not able to do simple text edits in the SQL window. I run sql queries constantly and have had to go back to an older version of SQL Developer. I have no idea what I may have done to cause this.
I can type in the sql window, but I cannot move my cursor to any part of the entered text. I cannot move to a new line [Enter key], or back space, or delete text. I can highlight text and delete it, but simple text edits do not work.
Has anyone experienced this and if so, is there a known cause and/or fix?
I have no idea on how to uninstall this version and reinstall it. I've tried deleting the files and re-running the zip, but my old settings are still present.
Help?

I had exactly the same problem and the Tools/Options/Accelerator/Load Preset fixed it. Thanks a lot!!!!
Alex

Does Group Region Select Edit not work in Logic 8?

I've been trying to do automation edits across several tracks using group. I have everything except Pan selected. Doesn't seem to catch on. I've had it catch on before but it's hit and miss. Am I missing something or does it just not work right?

Same here. I have seven channels of drums in comp tracks, and when grouped I am not able to edit the comps. All relevant parameters selected on the group settings, as far as I can tell. Other group functions seem to work fine.
I am able to select one region of each comp track. If I do more, the whole track greys out. If I try too many times, Logic sometimes just crashes.
However, the edits I try to make seem to be recorded in the edit history.

Editable not working

I can't seem to get editable to work like it should: when you
click on an already selected item in the tree, it should go into
the edit mode. The default behavior is very poor: it always goes
into edit mode on any item selection.

Well, I don't think the snippet you posted can be EXACTLY your real code, because JComponent is abstract: you can't say "new JComponent". When I try running your code, if I replace the first two lines with simply
JComponent components=new JTextArea()The area is, in fact, editable, and I don't see any strange shadow areas. Perhaps we'd have to see what the frame or panel is that you're trying to put this on.
That said, you're making things hard for yourself in a number of ways. Here's the code I generally use to make a scrollable text area:
JTextArea area=new JTextArea(4,40);
area.setLineWrap(true);
area.setWrapStyleWord(true);
content.add(new JScrollPane(area),BorderLayout.CENTER); // or wherever we need to put itHard-setting the preferred size of the JTextArea makes scrolling work strange: you scroll an area of size equal to preferredSize, but if you've entered more text than that, it won't scroll. Perhaps when you say that you can't edit you really mean that you can't get to text that gets written off the bottom? Especially given the very small size you give: Do you realize that Dimension(3,25) means 3 pixels wide -- which is perhaps half a character -- and 25 pixels tall, which is maybe a line and a half?

Helvetica problems, Finder has to be relaunched, Text Edit not working (?)

I'm having serious problems lately
and all these problems happen suddenly at the same time.
Helvetica Neue is causing serious problems,
mainly with Quark 6 or 7 but with other
programs also. Like in Quark 6, the font looks
jagged on screen but prints ok
(I remember in Classic there were font suitcases
which caused this problem when the screen font was missing,
isn't this problem impossible in Mac OS X ??!!?).
Certain applications cannot launch anymore (TextEdit,
CD Finder). Now I know that certain programs will not
work if certain fonts do not function properly or are not installed.
I tried deleting my fonts are reinstalling new ones, but the problem persists.
And, I don't want to play around with system fonts too much,
knowing that deleting certain font can seriously impair the operating system.
Now, Dealing with Helvetica Neue is very, very difficult.
I think Apple made a major error in creating its own Helvetica
with the same font number.
*What can I do (simply!) to clean ALL my hard drive of Helvetica fonts,*
*and keep only 1 copy for everything ?*
Also, everytime, I have to relaunch the Finder after starting, otherwise
I will not see folders and files on the desktop. And iTunes says it can't
find the iTunes Music folder (it's there, where it always was) if I use the dock
(draging a mp3 to the iTunes icon on the dock). But if I click on the hard drive,
get the file and double click on it, iTunes starts fine.
Aren't all these problems related to fonts ? Bad fonts used by the Finder, Dock ?
Thanks

(I remember in Classic there were font suitcases which caused this problem when the screen font was missing, isn't this problem impossible in Mac OS X ??!!?).
If you're referring to Type 1 PostScript fonts, then they don't work if the screen font for a typeface is missing. The printer outline portions of a T1PS font cannot work alone in any way.
I tried deleting my fonts are reinstalling new ones, but the problem persists.
It's possible other fonts on the system are damaged, or you've removed others the OS or other applications need. At the bottom of the article Sean linked to, you'll find the instructions on how to restore just the fonts from your OS X installation disks.
To get things back to square one:
1) Create a new folder on your desktop. Move all fonts in the /Library/Fonts/ folder and the Fonts folder within your user account into the new folder. Leave the /System/Library/Fonts/ folder alone.
2) Restore the fonts from the OS X install disk.
3) Follow the steps in Undoing Font Book. Note that you will lose any font collections you have created. Doing this will also clear the font cache files for your user account. Since Font Book's database is reset, all fonts in any Fonts folder will be active, regardless of their state beforehand.
4) Download and Font Finagler to clear the rest of the font cache files from your system that a Safe Mode boot doesn't.
I think Apple made a major error in creating its own Helvetica with the same font number.
OK, I'll read the whole thing again.
No need. Read section 5 for the information you need to get Apple's Helvetica fonts out of the way.
Also, everytime, I have to relaunch the Finder after starting, otherwise I will not see folders and files on the desktop. And iTunes says it can't find the iTunes Music folder (it's there, where it always was) if I use the dock (draging a mp3 to the iTunes icon on the dock). But if I click on the hard drive, get the file and double click on it, iTunes starts fine.
Aren't all these problems related to fonts ? Bad fonts used by the Finder, Dock ?
Much more likely, permissions errors at minimum (run Repair Permissions with Disk Utility), or the OS is damaged, which can of course only be repaired by reinstalling.

Multicam Editing Not Working

I'm using Final Cut Pro v10.1.3 and I can't get multicam editing to work. I've got three angles in my multicam clip and they are all synced properly. However when I open up the angle viewer and try to edit the clip, I can't. I see all three angles, but I don't see the icons in the top left that should allow me to edit audio only, video only or both. And when I try to switch between the camera angles, I can't. I'm only being show one angle and can't switch to any other. Any ideas what I'm doing wrong?

HT2509 Font Book not working correctly? or Text Edit not working correctly?

I downloaded a font onto Font Book and it works perfectly on Font Book and all the characters and symbols come up correctly, as they should. Then when I use it on Text Edit, it replaces the ', " and @ with a $ sign. What can I do to fix this, or is it unfixable? I'm using a Mac OS X 10.7.5 and I'm not sure what could be causing this situation.

It does that because that's the way the lazy person who created this font built it. Here's the layout of the font you're having trouble with:
Now compare it to the OS X supplied font Andale Mono:
Note on the third line, second from the right that Andale Mono has an @ symbol in the "at" position. The person who created the font you downloaded types a $ sign because that's what they put there, along with dozens of other glyph positions (must have really loved how they drew that $ sign). Which when you look where the quote and apostrophe are, they are also filled with the $ glyph.
The font is a piece of junk. Delete it.

In-browser editing not working on some pages

Hi,
I am working on a couple of Business Catalyst sites that are being built using Muse ( v7.4 build 30 on OS-X 10.9.3) and seeing different behaviour when trying to enable users to use the in-browser editing functionality.
On the first site: http://ttk-test-1.businesscatalyst.com/AdminConsoleXT/icecube/index.html
Everything works as expected. If I access other pages (i.e. not the home page) by clicking on any link, the destination page comes-up in editable mode.
On this second site: http://loxley-test-b.businesscatalyst.com/AdminConsoleXT/icecube/index.html
If I click on a manually created link on the home page, I get to the destination page and it is editable. As for the other site.
If I edit the browser url to go directly to any page, it is editable.
If I access pages by clicking on Muse Menu object links, whether automatically or manually generated, I notice that the displayed page changes to the destination, but the browser url doesn't. In this case the destination page is not editable, unless I access it directly by editing the url. Reading your Muse in-browser editing pages (Adobe Muse Help | Working with In-Browser Editing in Muse | Part 2), it seem that this should work? or have I misunderstood something?
thanks,
David Seward

Thanks.
So to summarise for anyone else reading this: the behaviour I have seen is as expected given the Muse bug with links that have effects applied.
And the only other workaround at the moment is to create an "edit page" with links to every other page, so that the users can use those to get to a page to edit it.
David

PSE 7(edit) not working

Similar Messages

Maybe you are looking for