PSE 7 File Reconnect Problem

I have a problem similar to other posts, but no solution found. I replaced my PC and now my PSE7 photos are disconnected. The photos used to be on drive C on the old computer. I moved them (outside of PSE7) to a new drive M. Reconnect will not correct the problem. Here's a printout from the psedbtool:
psedbtool version 1.06
Opening catalog M:\Photos\Family & Friends\MyCatalog 1\catalog.pse7db
Photoshop Elements version:      7
Total files               :  14815
Total files missing       :  12218
Total files offline       :      0
****** Volumes with warnings: 3
PSE Volume Table
Path used by PSE     : D:
Status               : online
Total files          : 0
Total files missing  : 0
Description          : Video
Serial               : 5C73-F8B9
Drive_path_if_builtin: D:
Type                 : builtin_drive
Id                   : 3756
***** WARNING *****  : Wrong serial number in catalog
Path used by PSE     : C:
Status               : online
Total files          : 9959
Total files missing  : 9959
Description          : C:
Serial               : 3060-DF12
Drive_path_if_builtin: C:
Type                 : builtin_drive
Id                   : 3644
***** WARNING *****  : Wrong serial number in catalog
Path used by PSE     : K:
Status               : online
Total files          : 2596
Total files missing  : 0
Description          : 1.3 TB Disk
Serial               : 1051-B51C
Drive_path_if_builtin: K:
Type                 : builtin_drive
Id                   : 232894
Path used by PSE     : E:
Status               : online
Total files          : 1
Total files missing  : 0
Description          : Video and Data
Serial               : 385D-836B
Drive_path_if_builtin: E:
Type                 : builtin_drive
Id                   : 232926
Path used by PSE     : M:\Photos\Family & Friends\MyCatalog 1
Status               : online
Total files          : 0
Total files missing  : 0
Description          : database relative
Serial               : amoc:database_relative_volume
Drive_path_if_builtin:
Type                 : database_relative_drive
Id                   : 2
Path used by PSE     : L:
Status               : online
Total files          : 2259
Total files missing  : 2259
Description          : 500 GB External Disk
Serial               : 2C40-8AE1
Drive_path_if_builtin: M:
Type                 : builtin_drive
Id                   : 173116
***** WARNING *****  : Wrong drive letter in catalog
Windows Drives
Drive  Type             Serial     Path
C:     builtin_drive    44D4-E7D9 
D:     readonly_drive   6FA2-0553 
E:     builtin_drive    385D-836B 
F:     removable_drive  0000-0000 
G:     removable_drive  0000-0000 
H:     removable_drive  0000-0000 
I:     removable_drive  0000-0000 
J:     removable_drive  0000-0000 
K:     builtin_drive    1051-B51C 
L:     builtin_drive    2C40-8AE1 
M:     builtin_drive    6892-2C47 
Z:     network_drive    0000-0000  \\192.168.1.109\memory_card\
How can I correct the PSE catalog to clear up the drive and serial number warnings and reconnect my catalog to the photo files?
Thanks.
Steve

Try reconnecting just one of the photos that was originally on the C drive.   In the reconnect dialog, are you able to browse to the new location of the photo on the M drive and identify it's thumbnail?   If so, what happens when you try to reconnect to that file?   If there's an error message, what is the precise message?
Looking at the "psedbtool" output, it's possible that PSE may be getting confused by the following situation: The drive currently called L used to be called M, and the catalog records M in its volume table, and there is now another drive currently called M.  PSE sometimes uses the drive letter written in its catalog and sometimes uses the drive's volume serial number.   When the current drive letter associated with a volume serial number doesn't match what's in the catalog, PSE can get confused.
So two suggestions:
1. Go back to the original PC and use the backup/restore method to move your photos from the old to the new computer:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Move_your_photos_1
I strongly recommend this method, since it is more likely to succeed in the face of all the drive-handling bugs in PSE.   After doing the restore, use Display > Folder Location view to rearrange the heirarchy or move parts of it to other drives.
2. Reassign the drive letter of the current M (6892-2C47) to something different, e.g. O.   Then reassign the drive letter of the current L to be M, so it matches what's in the catalog:
http://support.microsoft.com/kb/307844
This may likely solve your problem, but I can't say 100%.

Similar Messages

  • SAPGENPSE Conversion into PSE File for Digital Signature problem

    Hello,
    Would anyone help me with this problem
    I am trying to create a PSE file for implementing the Digital Signature in a Report following the Note 1300880 . When I try to create the PSE FILE.
    Use the SAPGENPSE tool to import the file in PCKS#12 format using the command import_p12 as follows:
    rem convert pkcs12 file to pse
    sapgenpse import_p12 -p CSD_01.pse -x a0123456789 -z a0123456789 CSD_01.p12
    when I run the command I get this error:
    C:\SAPGENPSE\ntintel>sapgenpse import_p12 -p CSD_01.pse -x a0123456789 -z a01234
    56789 CSD_01.p12
    import_p12: Can't create PSE.
    ERROR in af_create: (4352/0x1100) could not flush : "SW-PSE"
    ERROR in create_PSE: (4352/0x1100) could not flush : "SW-PSE"
    ERROR in modified_PSEFile: (4352/0x1100) could not flush : "SW-PSE"
    ERROR in flush_PSEFile: (1283/0x0503) Can't write file : "C:\Documents and Setti
    ngs\Administrador\sec\CSD_01.pse"
    ERROR in aux_OctetString2file: (1283/0x0503) Can't write file : "C:\Documents an
    d Settings\Administrador\sec\CSD_01.pse"
    C:\SAPGENPSE\ntintel>
    I would appreciate any help.

    Hi
    I solved my Issue.  SAPGENPSE failed with only  import_p12  error.
    I had misspelt , fat fingers.
    In AIX I ran     env
    Check to see    SECUDIR=/usr/sap/SID/DVEMBS03/sec  
    I had a spelling mistake and saw the wrong entry.
    To set this up, do this in your Instance profile or right before you run the sapgenpse
    setenv SECURDIR /usr/sap/FSB/DVEMBS03/sec     Insert your right SID of course.
    Also just run     sapgenpse  and it will tell you if you have set the environment correctly..
    Worked like a charm, certificate created.

  • PSE file for SAP NetWeaver is outdated

    Hi SAP experts!
    I am facing with the problem that my PSE file (tcode STRUST) is out of date.
    I deleted this PSE file.
    If I log in onto SAP system the warning/error comes up.
    Question:
    What are the technical steps to solve this problem?
    (create a new PSE file?)
    Thank you very much!
    regards
    Jürgen

    hello Jurgen,
    you will need to recreate the PSE which includes the public and private key pair and a public-key certificate.Go for self signed certificates
    For doing this folllow the procedure given in the link below:
    http://help.sap.com/saphelp_nw04/helpdata/en/56/a92f3ae689f058e10000000a11402f/content.htm
    after creating the PSE you will have to import in your system using STRUST
    For importing the certificate follow this method given in the link below:
    http://help.sap.com/saphelp_nw04/helpdata/en/56/a92f3ae689f058e10000000a11402f/frameset.htm
    Let me know of any issues
    Rohit

  • PSE file is out of date

    Hello!
    I am facing with the problem that a PSE file (tcode STRUST) on my SAP NetWeaver system is out of date.
    I deleted this PSE file.
    Now when I log in onto SAP system the warning/error comes up.
    Question:
    What are the technical steps to solve this problem?
    (create a new PSE file?)
    Thank you very much!
    regards
    Holger

    [Creating a Client PSE |http://help.sap.com/saphelp_nwce10/helpdata/en/46/dee8c819c840e0e10000000a1553f7/content.htm]
    [Creating the PSEs and Certificate Requests|http://help.sap.com/saphelp_nw04s/helpdata/en/a6/f19a3dc0d82453e10000000a114084/content.htm]
    check T code: OAHT (might help)

  • Adding PSD files to existing Album PSE files

    We have Photoshop 10 installed and my wife has created an Album.  Either the PSE file has been moved or deleted, but neither a manual server of the hard drives or using the reconnect feature was able to find the file. I was able to find an older version of the file as a different name, but it is missing a number of pages.  In my search I was able to find all the PSD files of the missing pages, is there a way to add these pages to the other PSE file I found?
    Any help would be much appreciated.

    Yes but I want to code - not interested in doing it from command line sorry.
    At the moment I have code like this which adds filename1.xml and filename2.xml to eg.jar: -
    String eg1 = "help me!!"
    String eg2 = "what is the solution?"
    JarOutputStream jar = new JarOutputStream(new FileOutputStream("eg.jar");
    JarEntry entry1 = new JarEntry("filename1.xml")
    JarEntry entry2 = new JarEntry("filename2.xml")
    entry1.write(eg1.getBytes(),0,eg1.length());
    entry2.write(eg2.getBytes(),0,eg2.length());]
    Now after this has been created, I want to start a new program and write a third file to the jar using code - how do I do that is the question?

  • PSE 9 suddenly will not open pse files - due to "program error"

    The program was working fine yesterday and now suddenly will not open pse files created yesterday or today. The error message reads "could not complete action due to program error." Am I going to need to deactivate and reinstall - and if so, how do I do that? Will I lose all brushes loaded into presets, all files currently unable to be opened if I do that?

    I have the same or at least similar issue - When try
    ing to open a Photoshop Elements 9 slideshow I get this message
    "This application has requested the Runtime
    to terminate it in an unusual way. Please contact
    this application's support team for further assistance" I first saw this problem today - can't think of why now.  I've had the program since last Christmas.
    I sure would like a solution as I'm in the midst of a project with it.

  • Major Reconnection Problems

    Hey all,
    An editor just emailed me the project file of a rough cut for a feature we're both working on, and I've been having pretty major reconnection problems. Despite the fact that we're working with exactly the same files on two identical drives, when I try to reconnect all the media I get the message:
    +"The file does not have proper content to reconnect to "(clip name)" at time (timecode) in sequence "(sequence name".+
    +Click "OK" to make this item independent and go to the next clip or "Cancel" to skip all clips from this file."+
    When I click "OK" (which I have to do 200 times, as this problem reoccurs over and over with many different clips at many different points in time), it eventually reconnects.
    However, though it appears that the clips have all successfully reconnected, the sync for the entire project is almost completely off. Sometimes it reconnects to the wrong part of the correct audio clip, sometimes it substitutes the incorrect clip altogether.
    Does anyone have any idea how to solve this problem? It's been driving me crazy for weeks.

    Stumbled upon these problems today. Final Cut Pro did not way want to reconnect the media to the capture scratch files. Only thing I did was I moved them to another drive.
    What solved the problem: rename all scratch files by adding the extension '.mov'. Confirm they are now decent quicktime movies.
    You might want to learn the single unix terminal command to do this for the entire batch at once.

  • After brrestore: Couldn't open verify PSE file /oracle/ sid /LASVerify.pse

    After a brrestore on same server and <SID> each time that we run cleanup logs from DB13  we see:
    BR0801I BRCONNECT 7.00 (32)
    BR1301W Error message from likeywlib: likey_init: Couldn't open verify PSE file ("/oracle/<sid>/LASVerify.pse") for writing, errno = 13 (Permission denied).
    BR1302W Initialization of license key library likeywlib failed, return code 1
    BR1304W Checking SAP license failed at location BrLicCheck-104
    BR0602W No valid SAP license found - please contact SAP
    BR0805I Start of BRCONNECT processing: cdzkodpr.cln 2008-12-06 22.46.27
    BR0484I BRCONNECT log file: /oracle/<sid>/sapcheck/cdzkodpr.cln
    It is on a Linux SuSE X64 - Oracle 10.2.0.4 box
    Regards.
    Ganimede Dignan.

    > After a brrestore on same server and <SID> each time that we run cleanup logs from DB13  we see:
    >
    > BR0801I BRCONNECT 7.00 (32)
    > BR1301W Error message from likeywlib: likey_init: Couldn't open verify PSE file ("/oracle/<sid>/LASVerify.pse") for writing, errno = 13 (Permission denied).
    you <SID>adm user has no permissions to write this file.
    Markus

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • How to open a .pse file in photoshop elements?

    Hello,
    All my previous files were saved as (.psd). Somehow, one of my photoshop elements projects was saved as a (.pse). I can't open it. How can I re open this file and continue working?
    Thanks in Advance

    A PSD is the standard working file for Photoshop.
    A PSE is a project file for Photoshop Elements. These projects are multiple pages. If you are working with a PSE on Windows, there will be a folder along side your PSE that contains a PSD file for each page of the PSE. If you are missing this folder, you won't be able to open the file. The PSE file itself is just instructions on how to open the PSD files as pages of a project. On Mac, all of these files are wrapped up in a single container.

  • SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

    i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
    I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
    Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
    can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
    Using XP home, all updates installed... latest itunes,

    It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
    http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
    Regards.

  • File sharing problems and horror story (nearly)

    I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
    I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
    I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
    Now about File Sharing.
    Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
    On the iMac I activate File Sharing.
    On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
    "Enter your user name and password to access file server YYY
    Connect to server as Guest or as Registered User"
    but I directly get the dialog
    "Select the volumes you want to mount on YYY"
    From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
    On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
    What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
    Now for the Horror Story!
    Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
    Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
    In the System Preferences/Accounts panel, user2 was still mentionned.
    In the Users folder, no user2 folder anymore.
    Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
    My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
    Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
    So now I am left with two questions
    why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
    why is it possible, from an Information pannel to delete the account of another user?
    Thank you all for comments!

    For the file sharing problems, answer is found in
    http://docs.info.apple.com/article.html?artnum=306723

  • File path problem

    I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
    I am doing this as an example so that I can apply it to all of my file problems....
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome
    Attachments:
    pathexample.zip ‏122 KB

    First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
    Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to  <Filepath>\"Current path" .    Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
    I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

    Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
    When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
    My pc is working with windos 8.
    Is there a solution?

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • File Info problems in Photoshop CC & CS5.1 on OS X 10.8

    I have recently upgraded my Macs, running OS X Mountain Lion, from Photoshop CS5.1 to Photoshop CC for two reasons:
    1. Because it most the most cost efficeint way to obtain the latest Camera Raw plugins that are no longer supported in CS5.1
    2. Because I began experiencing issues on two Macs where initially only in Bridge, was I no longer able to input any File Info dialogue.
    I make extensive use of File Info templates, which are then applied to batches of files in Bridge before individual files, or groups of files requiring the identical metadata are modified.
    After a time, once the overall batch of File Info templates had been applied to files I discovered that I was unable to edit them further. Even after Repairing Permissions in Disk Utility it usually took a reboot to fix the problem, although the problem was always solved.
    However there came a point a few weeks ago when I was unable write any further metadata to File Info, in Bridge or Photoshop, no matter what I did. Again this issue happened on two Macs so I'm guessing that it is not a machine issue.
    As I needed the latest Camera RAW plugins as well I decided to upgrade to Photoshop CC, which I have to say I have been very pleased with - until now. The dreaded File Info problem has now occurred again, although currently only in Photoshop, not Bridge. When I try to add or modify any information in File Info in Photoshop CC the dialogue box just closes!
    Clearly it is not just a Photoshop CC issue although I never had the problem prior to CS5.1 and I leapfrogged CS6 and I find it hard to believe that it is a machine issue. Could it be a conflict with the OS or with Extensis Suitcase Fusion 4?
    Has anyone else encountered this problem?

    Curt, Thanks for your rapid response.
    To answer your questions. I thought that, initially, the problem might be a permissions problem but it occurs on both boot drives and also when the same files are copied to Firewire external drives - on both Macs, but different external drives in each case. I followed your link but there was nothing there that I didn't already know or hadn't already tried, thanks.
    One computer is a 24" iMac and the other is a 15" MacBook Pro. I've also tried to replicate the problem on four PowerMac G5s running OS X 10.5.8 with Photoshop/Bridge CS4, with the same drives plugged in, but have experienced no problems at all. It's quite bizarre.
    Also, looking deeper into the conundrum, I find that I can't input any numbers, only letters! Using the keyboard all numbers, whether on the main or auxiliary keypads, cause the File Info dialogue box to either jump to a new tab or close. Using Shift on the numbered keys works perfectly however!
    It just goes on getting better...

Maybe you are looking for

  • I can't view youtube videos on my ipod touch (just updated it to iOS6)

    I was having trouble viewing youtube vids on my ipod touch, thought it may be a problem since i hadn't updated, but i tried updating to iOS6, and installed the new youtube app, but it still won't work. i also tried going through safari, but it still

  • Division Error

    Hi All, i am getting Error while running the report. how to over come this problem. Please help on this. for example: <?xdoxslt:set_variable($_XDOCTX,'1','10')?> <?xdoxslt:set_variable($_XDOCTX,'2','20')?> <?xdoxslt:set_variable($_XDOCTX,'3','0')?> <

  • Photoshop crashes on startup

    Every time I open photoshop CC through the Creative Cloud, it just freezes and Windows gives me an error that reads "Adobe Photoshop CC Has Stopped Working." It happens every time I try to launch photoshop, and I have tried reinstalling twice.

  • How can I tell if I have an iPad or iPad 2?

    How can I tell if I have an iPad or iPad 2?

  • Where do we code a material as an obsolete or dead

    Hi,    In BAAN there is a provision of coding a material obsolete or dead. Do we have a similar kind of provision in SAP? If yes, then where can I code a material dead or obsolete and how can I get the list of all obsolete or dead material. Thanks Su