PSE 7 Organizer Opening Error

I currently have PSE 7 and have not had any problems, now the program opens but as soon as I choose organiser I get the error "Adobe Photoshop Elements 7.0 has encountered a problem and needs to close. It does allow me to open the editor though.  Does anyone have any suggestions.

For your backup needs going forward, you might consider moving away from manual backup using the PSE backup command.  Hard drives are pretty cheap these days -- you can get a 500 GB external drive from Amazon for $70.   Hard drives are a lot faster, and you can set up a standard backup program to backup up everything on your computer, not just your photos, on a nightly automated schedule.  The main problem with DVDs and PSE backup is that it is manual, and human nature being what it is, people don't do it often enough (or at all).   Also, accumulating too many incremental backups without a full backup now and then increases the likelihood that a restore will fail partially or fully.   And doing a full backup to 26 DVDs is just too painful for most people!
I use two external hard drives, one for the nightly backups, and one that I backup to once a quarter and keep in my car ("offsite").

Similar Messages

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • PSE 5 Runtime Error Launching Organizer

    WHen I connect my camera and it automatically launches the Organizer, it tries to start for a minute or more and then I get a microsoft error "Microsoft Visual C++ Runtime Library (Not Responding)" "THis application has requested the Runtime to terminate in and unusual way."  And it freezes.
    For years, this organizer has worked flawlessly but one day the PC crashed or ran out of battery when PSE organizer was launching and it hasn't worked since.  I have tried several times to remove the entire program and re-install it but I still get the same error.  What can I do?  I don't want to upgrade if I will just get the smae problem.

    Please go to %appdata%\adobe\elements organizer\5.0\organizer and delete psa.prf ans status.dat files. I'm not sure if these used to exist for PSE5 since i don't have PSE5.
    Another thing to try is launch organizer keeping Shift key pressed and create a new catalog. This might help you t atleast get started with organizer if its only the old catalog that got affected due to abrupt shut down.
    Thanks
    Andaleeb

  • PSE Organizer 12 crashes soon after opening

    When I open Organizer directly from the desktopn, it asks if I want to back up my catalog.  I decline.  A few seconds later 'Elements 12 organizer has stopped working'. 
    I recently upgraded my installation from PSE 11 to PSE 12.  I run Windows 8 on an i3 Gen2.  My catalog has ~ 30K photos stretching back 12 years.  The catalog also contains video.  I was having a similar issue with 11.  I created a new catalog, thinking that the catalog file may have become corrupted.  That solved the problem for a couple of weeks, but the issue has now returned.  I want to like this product as it's easy to use, but the constant crashes have to go!
    What can I do to help solve this issue?

    Hi,
    Please refer to :
    http://psekb.blogspot.in/2013/03/pse-organizer-is-not-launching.html
    Thanks,
    Anwesha

  • Why can't I download photos from my harddrive in PSE Organizer 8?

    I've tried 3 different times to download my photos in PSE Organizer 8 from my harddrive.  Each time I tried a smaller group.  I just upgraded from Elements 4 and I was impressed with some of the features with the organizer and decided to try and use it.  I have all my photos organized in folders and sub folders.  According to the help information, I should be able to just tell it to download all my photos, including sub folders and once downloaded, I can click on folders view (can't quite remember exactly what it's called) and I will find all my photos organized the same way.  I have Windows XP.  I do have a large amount of photos.  The first try included all of them for a total of 11,644, but part of these are .pub and .doc files which cannot be download.  The last try was 8,843 photos which, again included files that cannot be downloaded.  I was really hoping to download my pictures in an already organized way.  Is this possible?  Is it that it just can't handle downloading that many at a time, or could it be some other problem?

    What do you see that tells you the photos didn't import into the Organizer? Do you get an error message? Does the Organizer appear to be empty when you finish importing?
    More importantly, this is not the correct process when moving from PSE4 to PSE8. You need to convert your PSE4 catalog. To do this, open PSE8 and select File->Catalog->Convert.
    My advice is to forget importing existing photos into the Organizer, and convert the catalog as described above.

  • PSE 11 RT Error R6034 An application has made an attempt to load the C runtime library incorrectly.

    PSE 11 Runtime Error R6034 "An application has made an attempt to load the C runtime library incorrectly."  I just start getting this message when starting up Win 7 Ultimate 64 bit laptop! In researching the error I found it to be caused by PSE 11.  When starting PSE 11 Organizer, I received the same error and it crashed.
    I tried http://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html and it worked as stated in Editor, but now Organizer will not open!
    Help Please?
    What caused this to begin with when I haven’t been using the program?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • PSE Organizer hangs up on start up on my Macbook

    A few weeks ago PSE 9 Organizer began to not show the thumbnails if I tried to display more that approximately 12 photo's at one time.  As long as I kept the photos displayed to less than 12-15 i was able to see the them.  If I picked a photo to edit the editor works perfectly.  The problem is with the Organizer.  Now the Organizer will no longer work at all.  When I try to start it up it opens and then just hangs up and I get a message that it is not responding.  I tried to just let it run for hours but it remains hung up.  I get a spinning colored circle.
    I uninstalled and reinstalled the software but I had the same issue when I tried to restart.  It will open and show me my files and immediately hang up and display the spinning colored circle.
    Any ideas how to fix this issue.
    Mike

    Barbara,
    Thank you for your reply.  I was able to get to the catalog manager and run the repair option.  the program indicated it did not find any errors but I ran the repair anyhow.  I then ran the optimizer.  I then opened the PSE Organizer and it took about 20 minutes but it did open.  I now have a better definition of the problem.  The issue seems to be related to the most recently loaded folders.  When I click on one of my old folders the thumbnails pop right up displaying as many as I want to look at.  When I click on one of my recent folders, three of them in all, the thumbnails will only display if I increase the photo size to where just 4 of them appear in on the display.   If I try to do  anything in these folders it take several minutes to execute and i get the spinning colored circle.
    Could I have corrupt files or did I possibly inadvertently change a setting when I pulled the pictures in off of the card reader that could cause this?
    Thanks again for your help.
    Mike

  • PSE 11 Opens and Immediately Close

    Adobe Photoshop Elements 11 opens for 1 or 2 seconds and immediately closes, no error messages; windows 8 operating system.

    Which app Organizer or Editor? Please refer to following blogs:
    Organizer: http://psekb.blogspot.in/2013/03/pse-organizer-is-not-launching.html
    Editor: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
    Please revert if your issue is not resolved.
    ~Andromeda

  • Why doesPhotoshop Elements Organizer opens when I click on Adobe Photoshop?

    I'm using a MacBook Pro and each time I try to open Adobe Photoshop Elements, the icon for both it and Photoshop Elements Organizer pop up on the menu bar.  If I click on APS Elements, it doesn't open, but the Organizer opens instead.  This is a new phenomenon. I used to be able to just open Elements. What can I do to make this quit happening?

    It depends on what version you are using.  In PSE 10 and 11 you can change this "phenomenon" by going to the welcome screen and changing the settings to as shown in this picture:
    If you tell us what version you are using, we can give you more info how to get the welcome screen if you are not getting it.
    I don't use Mac so I can't help you further.
    Good luck.

  • Organizer opens, Photoshop Elements 12 does not, please help!

    I am having a problem getting Photoshop Elements to OPEN, in fact it does not open.  Organizer opens just fine.
    I have a new computer...running Windows 8.1  I have installed, uninstalled, over and over and also brought computer back to origional state.
    I need a walk-though help.  Soon....

    Bluehighways do you receive a specific error when you try to open Photoshop Elements?

  • ITunes wont open Error -200

    yep
    well there i was opening iTunes
    and BLAMMO !
    ITunes wont open
    error -200
    what am i doing wrong now
    also coincedently my sound output aint working

    Also, I have not moved any files since updating. Still won't do anything.

  • HT1420 Cant get itunes to open.Error message:"its on a locked Cant get itunes to

    Cant get itunes to open.Error message:"its on a locked disk." What does this mean??!!

    ok heres what u gotta do
    yes i know its alot of steps but if you do them right it will work.
    1.remove all active versions of itunes
    2.then restart as it asks you to do, if it doesnt ask do it your self
    3.unplug ipod
    4.remove ipod software
    5. restart
    6.install the cd the ipod came w/
    7.when it asks you if you want to upgrade itunes say yes
    8.download the file
    9.intall the newest version
    10.restart
    if you have done exactly these steps(exactly in this order)then itunes should be working now

  • Cursor open error SQLSTT - 72000, SQL code - 969

    We have purchased a product called Access Manager for DB2 and installed it on our AS400. This gives us the connectivitiy to Oracle server with which we do the Warehouse management software interface using our legacy system on AS400.
    I have written several programs in SQLRPGLE and not quite sure as to how I can handle errors coming out of Oracle server.
    As per my knowledge in my programs, I do
    declare cursor
    open cursor
    fetch
    dow look for sqlstate
    fetch next row
    enddo
    close cursor
    I am also new to this much of SQL.
    Now, my programs are running in production and works just fine if we don;t have any issues with oracle server (database server down etc.).
    My question is if the database server goes down for any reason, my SQLRPGLE progam starts giving me cursor not open errors, the actual error is as follows:
    Connection to relational database HJAWCD1 already exists.
    ARDUPAR: ARDUPAR: rc=-1(OCI_ERROR) from OCIStmtExecute when asking for
    Describe-Info
    ARDUPAR(1): ORA-03114: not connected to ORACLE
    ARDAROC: rc = -1 from parse
    SQLSTATE class unknown - SQLSTATE 72000, SQLCODE -969.
    Cursor SEHOST not open.
    Cursor SEHOST not open.
    Cursor SEHOST not open.
    So although, the connection exist between the AS400 and Oracle server as suggested from first statement, but then the cursor is giving me problems of not opening.
    what I would like to know is how do I check in my SQL statement the error and somehow reconnect and open the cursor again.
    Please help in this regard, since I am not finding any help from iseries world becuase no one seems to have knowledge about this product that we have installed and I don;t have too mcuh of documentation on the product nor do I have any sample handling messages program using RPGLE between oracle and AS400 using the product.
    Regards
    Farhan Qadri

    It's been over a decade since I worked on an AS/400 (iSeries), but I've seen an ORA-03114 is thrown from the OCI when you've attempted an illegal statement. That error typically means you are no longer connected to the database. I'd guess that your new application has a defective RPG error management routine.
    Good luck, Michael

  • My Microsoft Word is not opening - error 1712

    my Microsoft Word is not opening - error 1712 - Mac OSX version 10.6.8 - processor 2GHz Intel Core 2 Duo - Memory 2 GB667 MHzDDR2 SDRAM
    my memory is been nearly used up, I have withdrawn 2 GB of archives so that I can continue using my machine, as I am down in Brasil and yet could not find more memory, so I have asked a friend of mine who lives in London to buy me 5 GB more. But as I have done that, once I tried to open an archive, it didn't do so, & I got the 1712 message - I thought of re-iniciating the PC, but I just have a big work document down at the dock, which I cannot loose. I am afraid that if I re-start the Pc I wil loose the document. So I need a way to get the document out of the dock to a file, before I re-start my machine.

    Following thread could help you resolve the issue.
    Word is not opening error -1712 ,can anyone help please

  • File opening error

    hello friends,
    i am doing data migration with lsmw withe directinput method so i did everything fine till the end i defined the logicalfiles also correctly and defined everthing perfeclty
    but i am getting below error
    File open error
    belrd110\INPUT\CT.TXT Permission  denied
    can anyone let me know where this is going wrong
    i am having the authorisation at the server level also and in the read and convert steps records and data coming perfectly but when i excute it at the end it is giving such error
    ur help will be appreciated
    Naveen

    Hi Naveen,
    Did you write your statment like this?
    OPEN DATASET P_DOWN FOR OUTPUT IN TEXT MODE.
    If it is not working, try to create a new file and access the same.
    Thanks,
    Sreekanth

Maybe you are looking for

  • Red Frames - Version 7.2.1

    I know there have been a lot of discussions about red frames in CC, I think I've read them all and tried every solution, here's my situation in case there is something that I missed. I work with many long (2 hour plus) .mov files with the AVdn codec

  • HTMLEditorKit, Custom Tags and CSS???

    I have an editor that will allow the user to insert merge fields. The document is in HTML and the editor supports basic document styling (bold, italics, etc). For the merge fields I would like to use either a custom tag or a generic tag like span. Un

  • Broken monitor

    My Macbook Air has a broken monitor, so I'm trying to connect to an external HDMI monitor using a HDMI cable with no success.  Everything I see on help sites talks of clicking inside system preferences on the primary monitor.  However, since my prima

  • Let the printer determine colors in Acrobat 8

    Hi, I am trying to figure out how to let the printer (post script) determine the colors when printing in Acrobat 8.  I have read in the user guide that I can configure Acrobat to allow the printer to determine the colors, I just haven't figured out h

  • Scanner help

    I want to scan documents and place them in other documents, including mail. Some of them may need to be edited before finalizing. Is there special software I will need to do this? Thank you.