PSE 7 stops working when trying to send e-mail

I am running PSE 7, Vista 64.  When I try to send a pic using e-mail attachment thru Adobe e-mail svc (AOL e-mail account), PSE 7 crashes.  I get a Windows msg saying the PSE 7 stopped working & Windows closes PSE 7.  I can see the e-mail msg, but no go.  Help.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Similar Messages

  • PSE 10 stops working when trying to convert a project to wma

    The project is about 400 pictures with music selected to it. About 40 minutes long. When it has converted about 148 000 kb it stops working "has to shut down"
    I´ve tried a lot of solutions but nothing seems to work. Please help.

    Thanks for your reply.
    IE version 9.0.8112.16421; Adobe Reader version 10.1.3. Only in the last week IE stops responding when I try to open a .PDF file from the web – eg bus route map, catalogue etc.  The messages sometimes say “error in preview handler” and sometimes “runtime error – abnormal program termination” – each time the program is terminated. The Reader opens any previous saved files OK, both downloaded from web or via email. Occasionally one from the web displays, with the error message over the top, but am unable to scroll the document or picture, enlarge it etc. I tried copying the PDF file to put on the desktop, but all that copied was the icon for the file.

  • Iphoto stopped working when trying to export to facebook.  iphoto is froze open with flip down for exporting.  Neither will respond.  Any ideas on how to fix this?

    iphoto stopped working when trying to export pictures to facebook - iphoto page and export flip down froze open -  cannot do anything with them - any idea what's wrong or what I can do to fix this?

    Force Quit iPhoto (Use Force Quit under the Apple Symbol in the upper left of this page). If you continue to have problems please re-post in the iPhoto's forum, it's located at:
    https://discussions.apple.com/community/ilife/iphoto

  • When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

    When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

    From which account does the email not send?  When sending from an account, the iPad will first try to use the aoutgoing server for that account.  If it can't it will try the other accounts listed.in the setting on the iPad for that account.  It soulds like the server for the account is not working and that the alternate server is resjecting the messag since it did not originate ffrom the account associated with that server,  That is to prevent sending spam.

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • When trying to send e-mail I get an error message:

    When trying to send e-mail I get an error message:Can´t send message.
    It was not accepted by the server because it (the server?) does not allow forwardin.

    Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps.  It also has stop work when trying to down load new Apps.  Any suggestions out their???

    For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps.  Everything else seems to work.  Any suggestions out their???

    I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working.  My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads.  I have checked into my ITunes account and the ID and password are correct  and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work.  My problem seems to be just with trying to use my ID and password when wanting to download new books or apps.  I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel.  This message appears usually ten minutes after I have tried to make a purchase.  At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen.  Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

  • Error(-101) encountered when trying to send a mail

    Hi,
    I am trying to send a mail through Business One 2005A. When i click on the email icon, a pop up window appears that asks if i want to attach an edited report with the mail. when i click "Yes", i get an error message error(-101) encountered. but if i click "No", i dont get that error. Can anyone please let me know what this error is all about?
    Regards,
    Harsh

    Hi Fulvia,
    This could be caused by folder permissions. Try creating a new share on the server (I typically create a share off the root of the drive, called something like B1_MAIL or SBO_MAIL), granting Full Control to all domain users and then mapping your attachments path in General Settings to this new folder. If this solves the problem then you can tighten up the security to fit your requirements afterwards.
    Hope this helps,
    Owen

  • Elements 11 organizer has stopped working when trying to edit an album?

    Has anyone run into this?
    The only place I've had the problem is when trying to edit an album.  After it stops working, elements 11 just shuts down.
    Operating system is Windows 7 Ultimate. 
    Thanks...

    Great.. you figured that out
    Just a thought, if you want to continue using Roboform as well as PSE and the two conflict.. you can Add PSE to Roboform's blacklist. That should stop the interaction between the two.
    Steps to do so-
    If PSE is running, close it now.
    In Roboform 7, go to Options / Applications Integration.
    Select Add to the Black List (the list of applications RoboForm will not attach to).
    Browse to the location of the PSE executable <Organizer in your case, possibly Editor too>
    Thanks
    Andaleeb

  • Itunes has stopped working when trying to open store

    I have gone through the uninstall/reinstall many times. Redid host file. Flush dns. Have tried many things. I noticed on one conversation on here. To go to the Action Center and click on itunes. It is saying a fault in the webkit.dll. I have no clue what that means or what I need to do to fix the problem.
    I did notice that when I uninstalled the last time that when I reinstalled I no longer had Quicktime. So installed that, but still no luck
    I have Norton 360 and Windows 7 64 on my laptop. We also have a desktop with the same, but the desktop is able to open the store. I am a tad confused on why mine is not. I can open itunes see the library then when I hit the itunes store it sits for awhile then it comes up with itunes has stopped working. Please if someone could help.

    It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
    Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
    Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

  • Windows explorer stopped working when trying to open a specific folder...and solution

    I have had a problem with a specific folder or two on my computer, when I open the folder I get the error message that windows explorer has stopped working.  It only happens with specific folders and everything else works fine. 
    I did a lot of reading to figure out a fix.
    I finally tried right clicking the program explorer.exe located in C:Windows and chose "run as administrator" and this fixed the problem.
    Note that the error message details list an application crash of windows.exe
    I thought I would post this to help others.  I don't know if this is the same problem some folks describe with a continual loop of the error message, problems opening the control panel or problems upon start up.  But if you have a similar problem to the one I described try this very simple fix. 
    Cheers

    I don't know what OS you are running, but under Windows 7 RC build 7100 the selection was ghosted to "run as administrator".
    I was able to stop the problem from happening by right clicking the folder I was having problems with, selecting properties>customize tab and changing the "Optimize this folder for:" from Videos to General Items.
    I know that this particular folder was optimized for general items from the beginning as I had just folders inside which were filled with videos. When I started to move videos into this parent folder to separate them later, this parent folder switched by itself
    to being optimized for Videos. I'm not positive but I think that this was the time I started to have a problem with this folder until I did what I described above.
    This is my very first post, so I hope I explained things well enough to be of help to someone.
    Thanks
    That's fixed my problem.  Stopped responding every time I opened My Videos, changed the file properties to optimized for general and now the icons aren't thumbnail big but it doesn't crash now...  Thank you, it was really starting to bug me.

  • "Adobe Encore (encore 5.1 in cs 5.5) has stopped working" when trying to create blue ray

    Newly installed machine with Windows 7 and Premiere Pros CS5.5.  I've googled the error and have reset the preferences and updated the sonic driver.  But when I start and create a blue ray project, as it's trying to create it, it gives the error "Adobe Encore has stopped working" and crash's.  Any help is extremely appreciated.  Thanks

    >updated the sonic driver
    As far as I know, that was for Version CS4
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    Also be sure you have legal files
    Premiere Import Formats http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800 0.html
    Premiere Export Formats http://help.adobe.com/en_US/mediaencoder/cs/using/WS725e431141e7ba651e63e3d1267818bc51-800 0.html
    CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-B5BC-436f-89D3-61DDC02A2C47a.html

  • Itunes has stopped working when trying store

    When in iTunes 11.0.5.5 and trying to access the iTunes Store I get a message saying that iTunes has stopped working.
    I have AVG 2013 FREE anti virus guard installed and know that this is working properly.
    Please help?

    Hi Scratche,
    Thanks for visiting Apple Support Communities.
    If you're still having trouble with the iTunes Store, you may find the steps in this article helpful:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Best Regards,
    Jeremy

  • "iTunes has stopped working" when trying to download purchase

    I have Windows 7. This is the first time I have downloaded on this brand new computer. I authorized this computer for iTunes and bought an album. It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc. I have tried this a bunch of times, and each time it says there are less songs to download, but my songs never appear in my music.
    thanks for any help....

    It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
    Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
    Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

  • IE stops working when trying to open a PDF on the web.

    I have checked the add-ons and Adobe Reader is enabled. I have the file AcroIEHelperShim.dll installed. When I try to open a PDF from a web page, IE stops working. What to do?

    Thanks for your reply.
    IE version 9.0.8112.16421; Adobe Reader version 10.1.3. Only in the last week IE stops responding when I try to open a .PDF file from the web – eg bus route map, catalogue etc.  The messages sometimes say “error in preview handler” and sometimes “runtime error – abnormal program termination” – each time the program is terminated. The Reader opens any previous saved files OK, both downloaded from web or via email. Occasionally one from the web displays, with the error message over the top, but am unable to scroll the document or picture, enlarge it etc. I tried copying the PDF file to put on the desktop, but all that copied was the icon for the file.

Maybe you are looking for