PSE 7 Won't print proper size

I have resized my picture to 9.7 X 7.7 inches to fit a particular frame. When I go to print I choose "Center" and I choose 8.5 X 11 paper size and "print preview". However, when I hit "Print" the preview window comes up showing my picture in the upper left part of the page and it prints out a a smaller size. What am I doing wrong?
[email protected]

Actually, Windows XP compatibility mode and C:\Program Files (x86)\ folder are independent of each other.
The x86 folder is where 32-bit programs get installed on Vista 64, regardless of whether they need XP compatibility mode. The PSE 7 installer will automatically place PSE in the x86 folder, since PSE is a 32-bit program.
There is no need to install PSE 7 on Vista 32 or Vista 64 by running the installer in XP compatibility mode -- that may well be contributing to your problems. PSE 5.0.2, 6, and 7 are fully Vista compatible.
Another person encountered very similar problems. He too then downloaded the free trial and had it run successfully. Then he installed from CD again, and the installer asked to uninstall the free trial; he said "yes" and the CD installation succeeded:
http://forums.adobe.com/message/2242533#2242533
If that doesn't succeed, I can recommend other troubleshooting steps.

Similar Messages

3210 All in One won't print legal size envelopes

I followed the simple instructions but my 3210 won't print legal (regular) size envelopes. What to do?

Hi , Welcome to the HP Forums! I noticed that your HP Photosmart c6150 will not print black. I am happy to look into this issue for you! According to this guide, Color Mix or Missing Colors on the Diagnostic Page, it states: Missing colors occur when the printhead nozzles dry out. Since you have tried cleanign the printhead multiple times, and the issue is still occuring, I would consider having the printer serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best regards! “Please click the Thumbs up icon below to thank me for responding.”

PSE 13 won't print to my Epson 845 Workforce printer. Help anyone?

I get an error message that the saved printer information is not compatible with this version of PSE or the saved printer is no longer available and that I should check printer settings before printing.

Suggest that you go to the Epson web site to be sure that you have the most recent drivers installed on you computer.
If that fails, contact Epson support.

Acrobat 8.1 PDFmaker won't print envelope size pages

Vista Home Premium 32-bit
Acrobat 8.1.3 Professional
Word 2007
I create mail-merged #10 envelopes in Word 2007 and then use PDFmaker to create a PDF of the result of the mail-merge. The resulting PDF has a number of pages each the size of a #10 envelope.
This has worked for years, until today.
Now, the pages in the PDF created from PDFmaker are 8.5"x11" with the "envelope area" centered in the document.
I can not find any possible reason for this or any solution in this forum - I have tried a number of solutions for other problems listed in this forum and this has not fixed the problem.

Have you checked if the Adobe PDF printer has Envelope 10 paper size.
if it doesn't exist:
From Control Panel>Printers>Adobe PDF
Right click, select Printing Preferneces
Adobe PDF Page Size -> Press Add
Create a new paper size with following details:
Paper name: Envelope 10
Width: 10.375 inches
Height: 4.5 inches.

Won't print correct size of pictures

My computer runs Vista and I recently installed a HP 1510 series printer. It prints regular documents fine, but when I try to print 4x6 pictures it will not print the full size. I am given only one option in print job (Windows Photo Gallery is default software) full page. I have tried selecting and de-selecting "fit frame" and it made not difference. I have reset the printer a few times and checked to be sure all drivers were up-to-date. I just want to click on the picture and have it print the right size! Any help would be appreciated.
This question was solved.
View Solution.

MaryLiz,
You do have to have the Full Feature Software installed for your printer for this to all work properly:
Install Full Feature Software - Printer
If you have the printer software installed, it is probably OK.
===========================================================================
If you select paper size 4X6, then you cannot also select the other options shown in that last column. These are mutually exclusive. The options that are available change according to the kind of paper you select.
Are you using 4X6 paper in the printer?
The printing preferences are something you have to set up the way you like -- and then change them when you change the paper, change the "thing" you are printing, change your mind about what you want...
You can click on a photo and have it automatically print a 4X6 photo if you have a printer with a photo-tray in it with photo paper loaded and ready to go. You would still have to change the printing preferences if you wanted to change the setup for any reason at all.
I think I might be missing the point entirely. My apologies for the Sloth-Brain. Smiling.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Officejet 4500 won't print Custom Size

Printer Preferences accepts 5.5x8.5 (half an 8.5x11 sheet) custom size In WinXP Control Panel/Printer. I also put this into MS Word 2003. But when I go to print the final Print Preview shows 8.5x11 size. Going back to MS Word/Print/Preferences to re-input paper I choose CUSTOM , Plain Paper, 5.5x8.5 inches, landscape but the box does not do anything. That is - after putting in the values the NEXT button does not activate. Only Cancel works. Help says that the HP Printer Preferences entered in Control Panel should work fine - and that MS Word page setup should over ride the HP settings. Doesn't. The only thing I can do is select 5x8 Index Card as paper type in HP - which is close but not exact. OR , I have to create my work using half of an 8.5x11 sheet but letting HP think I am using the whole sheet. There is nothing on the bottom half so it works. But this is a royal pain.
This works just fine using my Brother's Laser printer and my Canon Inkjet printer - on both MS Word 2003 and Lotus Word Pro. Any ideas would be appreciated. I tried getting the latest driver but install says I already have the latest.

OK, great, thanks for that.
How are you starting the print job? Are you using the print icon on the Yahoo page or File > Print or the print icon in IE8? Do you get different results from these three paths? Do you get any error messages?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Won't print to size from Indesign

Hi,
When I print an A3 page it doesn't print A3, I have spent hours and hours reading and changing settings but it still doesn't work.
I have a piece of artwork with a 12mm white border, I press print and the end result has 3mm border to the left and a 15mm bleed to the top and to the right - it is way off!
Does anybody have any ideas?
(It's a brand new Epson printer, using Indesign CS4, new Mac. It prints fine from Acrobat)
Many thanks
t

Hi Steve,
Thanks for the reply. I am considering that option. The only issue with that is I've noticed that the colours are considerably darker. The dark greens come out almost Charcoal.
Any tips on why this might be happening and how I might correct it?
I have read about embedding, RGB/CMYK, colour management, etc etc
Thanks again

Win Elements 7 won't print in landscape orientation

O.K. my PSE 5 will print in landscape orientation along the length of roll paper with an Epson Stylus 7600, but no matter what combinations I use with PSE 7, and making sure that at all stages the landscape icons/buttons are selected, PSE 7 won't print in anything else than portrait orientation and the image on the print page shows that, as does the print preview if I go to print. What is the issue here? I have tried deleting and reinstalling PSE 7 and also deleting the printer preferences at start up but this has no effect on the problem. I can edit in PSE 7, save the file, then reopen and print with PSE 5 with no problem, but that is not the point. I am using Win XP with 2G of ram and as pointed out, it works fine with PSE 5 with all my photo files.

Are you sure tht settings used re same in PSE5 & PSE7... Are you using Organizer or Editor for Printing?
+ Ripple (VJ)

Won't print 5x7 photos

I cannot print a 5 x 7 photo using my POwer PC G4 with OS 10.4.11 on a HP 5550 inkjet printer.It seems likethe printer won't print this size. Is there a work around?Gerrbear

Thank you for responding.WHen I choose page set-up, it onlygives me an option of 5 x 8 and the customization is grayed out and you can't select. When I then go to the print dialogue box, I can choose a 5x 7 but a message comes up that the paper is not the right sixe or something like that. What do you think?Thanks Gerrbear

CS 5.1 won't print 13x19 print on Epson R1800 printer. Other sizes will print. Suggestion?

CS 5.1 won't print 13x19 print on Epson R1800 printer. Other sizes will print. Epson offered suggestions and said it relats to Photoshop. Anyone else have this issue?

You'll get better answers on that in the proper PS forum...
Mylenium

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

I have a new HP Officejet 7500A Wide Format All-in-one printer. I love it and have had no problems with it...until now. The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11. I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties. I also checked the printer utilities...letter size paper is selected.
But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel. I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
I changed the printer back to factory settings. Nothing. I just had to reset up my printer on my network, but it still won't print. I tried to re-install the printer software from the installation disk, but it won't install. It says "already installed".
HELP!!!!!! I honestly don't know what to do at this point!!!!!
Thanks in advance!!

I have struggled with a similer problem with my new 7500A. I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle. As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer. I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up" then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there. Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc. I've solved the problem without going to those lengths, no thanks to HP.

Printing. My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

When you saye a you have set all the parameters, does that include the cell size in the print module? Are you printing on 5 x 7 paper? And, if you are, have you set that paper size in the page setup?

Ebay postage page does not print the postage label correctly It is 1/2 the proper size.

When printing Ebay postage the print size is approx 1/2 the proper size.
You will need to get the page info from Ebay

Upgrade your browser to Firefox 9 and check
* getfirefox.com

How can I get PSE 13 to print correct size and center photo?

I have MAC, Artisan 1430 printer, PSE 13. Recently upgraded from PSE 10 (never had a problem printing). I input the size paper, size image, paper type, etc. (as I would with PSE 10) and the same parameters for printer, but image does not print correct size and is not centered.

Hello Surendra,
Thank you for the clear explanation of the duplicate detection and how adding Metadata affects duplicate detection. But I am still wondering if there isn't a more useful way to handle this. If I am setting a metadata template for the APD, I want all my images to contain that information. And that makes duplicate detection non-functional for me. How can I workaround that?
It seems the duplicate detection process should take the metadata template into consideration before determining if the image is duplicate. Of course that may be other undesired side effects, such as a performance hit, etc.
Also, I have seen behaviors that seems to not follow this logic and seem to indicate that the duplicate process might not be operating as I would expect.
1. If I rotate an image in the Organizer, and set the Rotate JPEGs Using Orientation Metadata is unchecked (to rotate the image on disk), the import process still recognizes the image as a duplicate. It would be nice for me if there was some documentation on what triggers an image to be non-duplicate.
2. If I select two images and in the information pane, click Edit IPTC information and add IPTC data, the APD import process still is able to determine the images are a duplicate. From my perspective, there is no difference in the data displayed if I add the IPTC data via the metadata template or Edit ITPC information cmd. Why does duplicate detection work in one case and not the other?
3. If all the images are duplicates, then APD displays ALL images on the media, but unselected. I guess it's saying no new images found, which do you want to import again.

PSE 7 Won't print proper size

Similar Messages

Maybe you are looking for