PSE 8.0 Cannot See All Tools

Good Day Eveyone:
I cannot see all the tools that are listed in PSE Help for PSE 8.0. For example Healing Tool - I only see the Spot Healing Tool on side of my screen. I do not see both clone tools. How do I get these other tools listed? Thanks.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using//WSae2ea3b149d0c3591ae939f1038 60b3d59-7e2a_WIN.html
Thanks Robert

Thanks Anyway but I just found it.

Similar Messages

When I go into my email account through Safari, I cannot see all of my messages. 26 may show on the screen but it says I have 32. However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

When I go to my email account through Safari, I cannot see all of my messages. It says there are 34 but I can only see 26. However, at the bottom right the arrows to go to the next screen are not highlighted? I also cannot scroll any further down. Does anyone know how to scroll down to see all of my messages? I use Travel-net Communications as my email provider (Ottawa, On, Canada).

hey ,
if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

My picture files open up off center so I cannot see all of the bottom part of the picture.

Hi,
My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes and they do not fix my problem. What can I do to solve this problem?

Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot see all folder in share drive

I had a PC (WIN7) with share drive network. The problem is i cannot see all folders in share directory (total 68 folders), it's show 38 only in my MBP 10.6.7. But seems without any problem in TIGER or other PC. I had to try re-install, but still got same problem!
Anyone else experiencing the same? Any suggestions as to a fix?

Hi, a couple of ideas...
The Vanishing Startup Drive or Folders by Pink Mutant/Francine Schwieder...
http://pinkmutant.com/articles/invisible.html
I wonder if ACLs got enabled on those other drives?
http://x704.net/bbs/viewtopic.php?f=12&t=2180&p=26242

I cannot see all preferences options

Hello
I'm new to flash pro CC but I've already worked in flash...
I'm animating a sequence and would like to activate the span based selection but I cannot see all the options in the preferences menu.
How can I get to see all the options in the preferences menu?
(sorry if there are some mistakes I'm french)

Hi Brice,
Which version of DW are you using? Which OS? Have you experienced this issue before or is this your first encounter?
As a first step, I suggest you try recreating Preferences (Re-create preferences) and see if that helps.
Thanks,
Preran

My iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend.

my iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend. What do I need to do to fix this?

never found the answer by looking at a similar q on the right...thanks anyway!!

TS3274 Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size? all the icons. How can I resize the infor on scren?

Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size?

Have you tried resetting your device? http://support.apple.com/kb/ht1430

Cannot see all columns in dashboard,but can see in RPD

I added a new datasource ,can see everything fine in the Admin Tool in all the layers but cannot see the columns in the dashboard in subject area.
The permissions are read only in the Admin Tool.

Check the Permissions in Presentation Layer for the user you have logged in.
Thanks,
Sasi Nagireddy.

Use firefox cannot open cpanel of a domain name and cannot see all image of a url when use firefoz to open that url

Use firefox to open one cpanel of a domain name but can open at safari or IE
Use firefox browser to open one url, all the image of this url cannot see but can see at safari or IE?
Vivien Chan
[email protected]

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.com/kb/Images+or+animations+do+not+show
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.com/kb/Error+loading+web+sites

Pages go from right to left, blank space on left and cannot see all of page at one time

All my screens move to the right and there is blank space on the left which is about 4 inches wide. Then my screen goes back to normal for a second or two and then back to the right again and I cannot see the whole page.

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

New LoginManager cannot see all users

Hi all,
Just trying to get to grips with users and roles in Azure, and I've hit a couple of questions.
Here's the process I've been through.
I created a new server
I exported a database from an existing SQL Server as a bacpac file, and successfully imported it into Azure (this step I'm hazy on the details, because I only did it the once, and it was a while back now!)
I connected an existing MS Access front end to the Azure SQL Database successfully.
This database is for a client with half a dozen staff. All works well.
Going through the database in more detail today, I noticed that the database in question has users for the staff at my client, but not a user called Andrew - which I've always logged in as. Looking more closely, I see that the Login of Andrew, which I understand
was created as part of the provisioning process when I set up Azure SQL Database, is mapped to dbo within the database.
In order to keep things simple, I decided today to create a new user "Andrew" on the database, which would map to the Server login of Andrew. To do so, I used this statement:
CREATE USER andrew
FOR LOGIN Andrew
However, the following message was returned:
'Andrew' is not a valid login or you do not have permission.
This confuses me, as I can see that the login Andrew does exist, both when I look at the Security > Logins object within SSMS, and if I issue the statement
SELECT * FROM sys.sql_logins
So, I thought that maybe the solution would be to create a new Login, called AndrewR, and then create a new User on the database (and on the master database), also called AndrewR. This I did, and then I used the following two statements (while logged in
to the Master database as the original Andrew account):
exec sp_addrolemember 'loginmanager' , 'AndrewR'
exec sp_addrolemember 'dbmanager' , 'AndrewR'
Now, all seems good, in that the login is created successfully, as is the user. However, I now have the following problems:
When I log in to master as AndrewR (the new user) I can see all the databases. But I can't see any user except AndrewR, dbo, guest, sys and INFORMATION_SCHEMA. When I log in as the original login (Andrew) I can see all the users on all the databases.
Despite having granted loginmanager role to AndrewR, when logged in as AndrewR if I try to create a new user, I get a strange error:
Password validation failed. The password does not meet policy requirements because it is not complex enough.
This would make sense except that the password I've tried to assign is 'drtrtDSP()*)_IPOJTh1s_FREDpw1!' which is about as complex as I can come up with!
None of this solves my original issue of trying to create a user called Andrew to match the original Login of Andrew.
I'm sorry to post several questions in one post, but they seem to me to be all part of this same issue.
Can anyone help or provide guidance?
Incidentally, I've read (several times!) the information at http://msdn.microsoft.com/en-us/library/ee336235.aspx - this is where I've gained what little knowledge I have!
Many thanks
Andrew

Hello
Andrew,<o:p></o:p>
Thank you
for the explanation. Is there is a specific reason why you want to create a
user 'Andrew' for the Server-level principal login 'Andrew'. Cause - <o:p></o:p>
1. The
database user in the master database corresponding to the server-level
principal login cannot be altered or dropped.
2. Although the server-level principal login is not a member of the two
database roles dbmanager and loginmanager in the master database, it has all
permissions granted to these two roles.<o:p></o:p>
Please refer msdn.microsoft.com/en-us/library/azure/ff394108.aspx#logins and msdn.microsoft.com/en-us/library/ee336235.aspx#DatabasePerms for details.
Also, I
believe only the creator of the database(and the server-level principal login)
can create users in that database. For ex - <o:p></o:p>
After you
created user AndrewR and granted it the dbmanager and loginmanager roles.<o:p></o:p>
1. Connect to the database server(master database) as AndrewR.<o:p></o:p>
2. Create a new database AndrewDB and a new login AndrewR1, like below - <o:p></o:p>
create database AndrewDB<o:p></o:p>
create login AndrewR1<o:p></o:p>
exec sp_addrolemember 'loginmanager' , 'AndrewR1'<o:p></o:p>
exec sp_addrolemember 'dbmanager' , 'AndrewR1'<o:p></o:p>
3. Connect to the database AndrewDB as AndrewR<o:p></o:p>
Create user AndrewR1 for login
AndrewR1
-------à this works.<o:p></o:p>
I hope this
helps. <o:p></o:p>

I cannot see all the data in target disk mode

I have an issue where my MacBook pro is not booting into the Yosemite. I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
How can I see my data for all the other users? Help please!!!

Could be that the the data or directors on the HD are corrupted.
- Copy all data you can
- Try cloning the whole disk to another disk before you attempt recovery methods.
- Try repairing the HD via Disk Utility
- Try a data recovery program
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

When browsing documente library contents from client application, cannot see all files

We are currently running SharePoint 2010 Enterprise in a small environment. On one of my sites, I have a document library with various documents uploaded (docx, xlsx, pdf). I am unable to see all the documents when browsing the library from Word/Excel/Adobe
Acrobat. For example:
- At the root level of the library, I have 5 folders
- In Folder 1, I have 10 PDF files
- If I go into Adobe Acrobat 11, for example, and paste the address of my site in, I can see the library and I can click on it and see the 5 folders. If I click on Folder 1, there are no PDFs listed. Even changing File Type to "All Files"
still returns 0 results
Things I have tested:
If I view the library in the browser, I can see the 10 PDFs in Folder 1. They are not checked out and they are visible to everyone
If I click Library>Open w/ Explorer, I can see all 10 PDFs in Folder 1
If I try using other client applications (Word, Excel, etc..), I cannot see any files in Folder 1, even when I change the File Type to "All Files"
If I click in some of the other Folders in the same library from within a client application, sometimes I can see the files but most times I cannot
What could be causing this? I do not see any errors in any of the event logs.

Hi Sephiroth,
I think my observation is when you browse from word/Excel/Adobe it is taking your local system credentials and so not showing files when you access.
local system account means the account which you used to login to the system.
For example,you logged into the system as contosomo\xyz and you are trying to connect to the site using Contosomo\setup account,what my point is though you logged in to the site using the setup account site is taking your xyz account credentials and so it
not showing any files as xyz obviously will not have access.
To confirm this, you can try by giving atleast read access to the local system account (in this case xyz) to the library and then test again whether you are able to see the files or not.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

I cannot see all html elements

I have worked on a file in Dreamweaver. When I open it in Edge Animate and look at the Elements panel I can see all the html elements BUT I cannot see them on stage. I can only see the Edge Animation stage. How can I see the entire html page?

If this is a subscribed calendar that is pulling the events from another server on the internet, and you have a CDMA phone (such as Verizon or Sprint), it may be because your carrier doesn't support simultaneous voice and data (i.e., when you're talking on the phone, the data connection is suspended dropping the subscribed calendar until you're finished with the call). This is just a guess; I can't confirm this with my phone as I have AT&T which supports simultaneous voice and data.

Exchange 2013 EAC Service Pack 1 New mailbox cannot see all OUs when selecting Browse with "Exchange Organization Management " permissions

Single forest 2 Domains. When I go to create a new mailbox in the Exchange Admin Centre and "Browse" the Organizational Unit. I can only see a few OU in the Parent Domain and most in the Child Domain. I have tried "expand All" and
cannot see anywhere in the EAC to set a "Recipient Scope". The account I am using has "Exchange Organization Management " rights and is a Domain Admin as well.
The Exchange servers are members of the Root Domain.
In the "Select an Organizational Unit" menu there is a message "There are more results available than are currently displayed". I have tried searching as well and cannot find OUs that I should be able to.
All the servers have had Exchange 2013 Service pack 1 installed.
Any suggestions?
Regards,
John

Changing that setting resulted in the ECP site being inaccessible. So I changed it back
I have copied the user accounts to test with.
Originals:
User1: can see OU's when making a new user through the ECP (access: domain, exchange recipient admin)
User2: cannot. (Enterprise, domain, exchange, schema admin)
Test users:
test user1: copied from user 1, cannot see any OU's when creating a new user.
test user2: copied from user 2, can see all OU's when creating a new user.

PSE 8.0 Cannot See All Tools

Similar Messages

Maybe you are looking for