PSE 8.0 Print Issues.. Pleez Help

a very nice person explained about the print margin probs.. there is no changing the print margins...
BUT
the workaround should be to take my 12 x 12 created document. it has usually 20+ layers.. merge all layers down, create a new doc that is 13 x 19, take the 12 x 12 doc and paste onto the 13 x 19. then print.. However...
when i print using printer manages color or if pse manages the color everything is MUCH darker printed out....
Its not the printer bc i can print out pics and graphics in other programs and it is o.k. I even went to my paper manuf and got printer profile to use.. tried that also..
can someone please let me know what i am doing wrong.. i need to print about 30 created scrapbook pages and I'm stuck.. i've wasted TONS of ink and paper (and neither one is cheap).. onscreen color looks FANTASTIC...
thanks for any help with this.
Tammy

Are you printing from PSE Editor or Organizer? Both prints differently i guess.
~V

Similar Messages

Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
Doc

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

Printer Issue, Please Help

I have read through the Peripherals topics and the only similar thread had gone unanswered. I am using my PowerBook G4 12-inch w/ 10.4.7 and out of the blue it stopped being able to print (I had not recently changed and/or downloaded anything). I know it is neither the cable nor the printers themselves b/c I have had no problems printing from my G4. I thought it was an issue of hard drive space, but I still have 1.5 GB left and I would imagine that would be enough to allow for printing. I am not able to print from the internet, Word, Powerpoint, Mail, etc. This is what it says when I attempt to print from Word:
Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings.
In Safari it simply says: Error while printing.
I am unable to open the Print Center when I try to access it, and the printer I am connected to is highlighted when I open "Print & Fax" in System Preferences.
I have no idea why this would happen out of the blue and what could be causing the issue. Any feedback/ideas/answers??
Thanks!
Roxanne
12 inch PowerBook using 10.4.7 Mac OS X (10.4.7)

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

Printing Issues - Please Help

I'm using the javax.print package and created the following method to print the contents of an array of Strings:
    private static void printData(String[] data){
        try {
            int totalLengthOfAllStrings = 0;
            for(int i = 0; i < data.length; i++) {
                data[i] += '\n';
                totalLengthOfAllStrings += data.length();
int runningLength = 0;
char[] printArray = new char[totalLengthOfAllStrings];
for(int j = 0; j < data.length; j++) {
char[] tempArray = data[j].toCharArray();
System.arraycopy(tempArray, 0, printArray, runningLength, tempArray.length);
runningLength += tempArray.length;
DocFlavor df = DocFlavor.CHAR_ARRAY.TEXT_PLAIN;
Doc printDoc = new SimpleDoc(printArray, df, null);
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(new Copies(1));
//aset.add(MediaSize.NA.LETTER);
aset.add(Sides.DUPLEX);
PrintService[] services = PrintServiceLookup.lookupPrintServices(df, aset);
if (services.length > 0) {
DocPrintJob job = services[0].createPrintJob();
try {
job.print(printDoc, aset);
System.out.println("Print successful!");
catch (PrintException pe) {
catch(Exception e) {
e.printStackTrace();
It doesn't give me any errors, but the "Print successful!" check is not appearing so the program must be catching a PrintException. Do you know why this might be and how I could fix it?
Thanks a bunch,
-Matt

Under further investigation, I found that the error comes because the default printer doesn't support the particular DocFlavor. Those supported are:
image/gif; class="[B"
image/gif; class="java.io.InputStream"
image/gif; class="java.net.URL"
image/jpeg; class="[B"
image/jpeg; class="java.io.InputStream"
image/jpeg; class="java.net.URL"
image/png; class="[B"
image/png; class="java.io.InputStream"
image/png; class="java.net.URL"
application/x-java-jvm-local-objectref; class="java.awt.print.Pageable"
application/x-java-jvm-local-objectref; class="java.awt.print.Printable"
application/octet-stream; class="[B"
application/octet-stream; class="java.net.URL"
application/octet-stream; class="java.io.InputStream"
application/postscript; class="[B"
application/postscript; class="java.io.InputStream"
application/postscript; class="java.net.URL"
(I printed them froma for loop)
Is there a way I can somehow make an image of the text and print that?

Need help diagnosing cause of printing issue w/ image distortion

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.

Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can anyone help me troubleshoot duplex printing issue to Xerox 8560?

Can anyone help me troubleshoot duplex printing issue to Xerox 8560 phaser?

Solution may be found if you search in the "More Like This" section over in the right column and by contacting Xerox tech support.

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Printing issue

I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks

Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Arabic -English Report direct printing issues in Oracle 10g

Hi,
I am working on Oracle database 10g and application server 10g on windows 2008 platform in Arabic Environment with the following settings.
-- Oracle database NLS_Characterset as AR8IS08859P6
--Oracle Database registery NLS_LANG as ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256
--Application Server registery NLS_LANG as ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256
-- font subsetting in uifont.ali for PDF
-- set Reports_BIDI_ALGORITHM = UNICODE
Now I am facing an issue in connection with arabic reports: When user enter the narration in the DATA ENTRY form like     ' AP600N حبر طابعة ريكو اسود   '      writing from right to left.
it's storing in the database as ' حبر طابعة ريكو اسود AP600N '
Again when its querying in the form, it comes properly as it's written.
Even its coming in the bitmap report in screen as it's written.   But when I am printing directly to printer in bitmap mode, its coming as its in the database.
Is there any way to get the print as they wrote in the screen?
Also the Character mode printing comes in left to right in screen as well as in printer.
Please help me...
with thanks & regards,
BJ

Don't tell so much.
Check the following link
1. PDF Reports in Unicode / Arabic &amp; English | Oracle Community
2. OraFAQ Forum: Reports & Discoverer » Report in Arabic(pdf) (merged)
3. Arabic Report generated to text file giving Jun... | Oracle Community
Hope this helps
Hamid

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

PSE 8.0 Print Issues.. Pleez Help

Similar Messages

Maybe you are looking for