PSE 8.0 windows 7 slideshow created but output to wmv file repeatedly crashes (with 1 exception)

I have PSE 8.0 Windows 7 and successfully create slideshows but the output to wmv file repeatedly crashes (with 1 exception) & adobe crash reports submitted have gone unanswered. Can anyone suggest solution(s) please?

Please see if windows media player is present on your system.

Similar Messages

Using 29.0.1 on Win 7 Os - popup window says v30 available, but "About Firefox" says 29.0.1 with no option to upgrade. Bogus "

Using 29.0.1 on Win 7 Os - popup window says v30 available, but "About Firefox" says 29.0.1 with no option to upgrade. Not sure whether popup is bogus or why "About Firefox" doesn't give me the option.

Just wondered why "About Firefox" didn't invite me, or at least tell me there was a newer one. Thanks,
BH

Fixed a problem of repeated crashing with a new install of Firefox 28 on Windows 8.1

This isn't so much a question as a contribution of solution.
On a new computer running Windows 8.1 a new installation of Firefox 28 was repeatedly crashing or freezing ("no response"). Loading pages could be slow, and scrolling jagged. Totally unusable, especially after playing content with Shockwave.
Although I had not installed any plugins apart from Shockwave and Adobe Acrobat, I had a look and was surprised to see several that I had never asked for. I deactivated those I do not think I need:
Intel Identity Protection Technology
Photo Gallery
WildTangent Games App V2 Presence Detector.
Since deactivating these, Firefox is running fine. But I had been obliged to use another navigator for a week until finding the time to research the problem.
Why are these unasked-for and obviously (for at least one) troublesome plug-ins installed by default? It's not doing Firefox any good!

I return to this thread more than 3 months later, during which time I have not had a single day's satisfactory use of the latest versions of Firefox over Windows 8.1 with Flash content. Not very stable at the best of times (constant increase of memory usage) and when accessing Flash content, ffx came as near as I've ever seen an app come, to getting drunk. Memory goes through the roof, repeated freezes, disappearances/reappearances in the UI and very difficult to shut down. I've tried all the recommended fixes, disabling hardware acceleration, protected mode etc. to no avail (but a LOT of wasted time).
I've been having to use IE to access Flash content.
Last night I finally came to what, for me, is a quite radical decision to downgrade. I'm not _recommending_ this to anyone, but some may find it helpful as long as they're aware of risks and take appropriate precautions. Note that the official Mozilla archive page puts switching to a different browser _before_ returning to an older version of Ffx.
I've gone back to Ffx 28.0 dated 2014.03.15 (the Ides of March, I now note...) and Flash 10.3.183.90 which I downgraded to a bit earlier as part of my attempts to find a solution. Firefox is now stable, memory usage reasonable (currently 202MB for 6 tabs including some Flash content).
I currently have only one comment, handling of marquees (which has always been jerky in Ffx) I now see is using ''excessive processor time (up to 15% on a Core i3 with 4 GB RAM!)'' and jumps of 5-10 MB in memory usage. The latter returns to initial level at each cycle '''but I rather suspect doesn't in Ffx 31''', which might contribute to an apparent leak. [Edit : this seems all right on a different machine, so will have to find what's causing the problem on mine!]
Fortunately the cpu and memory usage disappear as soon as the marquee is pushed out of the viewport... so I conclude Firefox is not handling them if it doesn't have to show them.
Will post back with any developments but at the moment I'm staying with these versions!

How to create clips in old WMV files

Hi
I have lots of old wmv files created with movie maker 5 years ago. Can i import/add them into premiere elements and then somehow automatically split them into clips based on scene change or time/date chage etc.? If so how do i do this, i'm struggling to find help documents about this and i dont have time to manually go through every single file and split them.
Also is there a way i can easily improve the quality of these files, they seem very pixelated when i play them in Pr elements.
thanks for any help you can provide.

>improve the quality of these files
Not really... WMV is a highly compressed file, and once a file has been compressed, there is no way to bring back that lost information
As for the rest... some reading (and, you did not state your PreElements version, so info for all recent versions)
Version 11 http://forums.adobe.com/thread/1071694
-and http://forums.adobe.com/thread/1075408
Importing Video http://forums.adobe.com/thread/1065281
Saving & Sharing http://forums.adobe.com/thread/1051093
Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
-v09 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-version/dp/1453871209/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
Premiere Elements Updates http://www.adobe.com/support/downloads/product.jsp?product=101&platform=Windows
AVCHD to DVD http://forums.adobe.com/thread/862611
Moto Audio Problems http://forums.adobe.com/thread/869519
Cyberlink Timeline Problem http://forums.adobe.com/thread/882117
Will NOT edit Flash http://forums.adobe.com/thread/911671
Elements and AVCHD http://forums.adobe.com/thread/947846
Remove Watermark http://forums.adobe.com/thread/433730?tstart=30
Jerky or slow playback http://forums.adobe.com/thread/1071217
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive
-the page also has links to help pages for previous versions

Making Windows Media Player my default player for WMV files

I installed Flip4Mac and set it as my default player for WMV files. Now when I open large WMV files, I have to wait 10-20 seconds for them to load. I want to go back to Windows Media Player as the default player for all my WMV files - how do I do that? Thanks in advance!

Single click on a .wmv file and open the Get Info window.
Change the "Open with:" app and then click the "Change All..." button.

PE7 creates but cant read m2v files

Working from HDV clips, output a file as m2v ( v because it contained no sound)but when I tried to import the clip into a project I'm told the file type is not supported or I don't have the correct codec installed. I was able to import m2v files when using PE3.

If you ever get your files to load into pre 7, you may run into another problem:
I can load .m2v files and .mpv files into pre 7, but there is a media pending message that won't go away. When I double-click on the thumbnail in the organizer, there is a message that indexing is going on. However, the indexing progress bar never progresses.
If I exit out of pre7 and rename the file "ImporterFastMpeg.prm" to "ImporterFastMpeg.prm.xxx" and then start pre7 and open the project again, the media pending messages no longer appear.
The ImporterFastMpeg.prm file is in c:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US.
The ImporterFastMPEG.prm file is needed for indexing MPEG-2 files for quick access and keeping video and audio in sync.

QuickTime creating 1% app for .jpg files into "Open with".

After installing QuickTime 7.7.6, I tried to open a .jpg file and I saw a weird 'OpenWith" app name called "1%". I searched the internet and someone stated that it is a broken extension that QuickTime installs and he recommended to uninstall QuickTime to see if that is gone. I uninstalled the QuickTime and that broken extension was removed and when I re-installed the QuickTime, that 1% app was back in "OpenWith".
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/help-how -to-remove-1-application-in-choose-default/1d84241e-fbd7-498b-8da9-458d9ef07036

It is different in Windows 8.1. I know exactly what you were about. I even have checked that location before your suggested it. The problem is with Windows Registry entries that QuickTime creates. Apple should correct all of the reg data that is listed below:
[HKEY_CLASSES_ROOT\QuickTime.bmp\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.dib\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.jp2\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.jpe\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.jpeg\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.jpg\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.mac\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.pct\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.pic\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.pict\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.png\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.pnt\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.pntg\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.psd\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.qti\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.qtif\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.rgb\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.sgi\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.targa\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.tga\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.tif\shell\open\command]
@=" \"%1\""
[HKEY_CLASSES_ROOT\QuickTime.tiff\shell\open\command]
@=" \"%1\""

Just installed CS6 but can't associate file type JPG with Photoshop.

I've just now installed Photoshop CS6 and Lightroom 4. File types PSD and TIFF work fine, but I'm completely unable to associate JPG, JPEG or any other variant with the Photoshop program such that I can double-click on the photo file and open Photoshop and the photo. I can associate JPG with either Bridge or Lightroom, or several other programs, but when I browse to Photoshop and select Photoshop.exe nothing happens, not even an error message. Does anyone have a clue what's going on here?
Operating system is Windows 7 Ultimate Edition, 32-bit. There is 4GB of memory in the machine, which is a Dell Vostro 1720 laptop.
Thanks,
Bill Sexauer

I know there is a problem with the file associations and that I need to fix them. What I don't know is how to do it. I successfully fixed the associations for file types PSD and TIFF, but I'm completely unable to do the same for type JPG. I did use Open With and that's where it just refused to allow me to change to Photoshop. It would allow me to change from the default Windows Photo Viewer to Bridge or to Lightroom, but not to Photoshop.
The problem was probably caused by my having installed CS6 prior to uninstalling CS4. Should I just reinstall CS6 right over the top of the existing CS6?

Upon creating a new catalog, all files are renamed with a postfix: "-2"?

My catalog was corrupted, and i decided to create a new catalog from cratch.
To my big surprise alle falenames was renamed from IMG_xxxx.cr2 to IMG_xxxx-2.cr2. Why?
This is i problem sice i still god the old catalog, and try to recover some of the old editorial settings, but since alle files are renamed the are no longer visible in the old catalog. just about 15.000 files are renamed!

Lightroom only adds suffixes when it finds files of the same name in a location it's moving or copying too.
What option did you use on Import? Copy/Add/Move?

Possible to create a static library (.a) file for Xcode with Flash Builder?

Is it possible to write code in AIR that can be compiled to static library (.a) to be used in an iPad app?

Hey paulhart83,
My guess is therabbitwindfall's answer was correct but where you able to find a solution to your question? If so, please do share. I need to embed my app within another app and the only way is through a static library. I'd rather not have to re-develop my app in Xcode in order to generate the .a file.
Thanks.
Novian

Organizer 8 Slideshow - Help - black slides in .wmv output?

Greetings. I recently purchased Elements 8 (both Photoshop and Premiere). My primary reason was to create slideshows in an easy fast manner with lots of features (i.e. pan/zoom). I have used Photoshop for years. I created my first slideshow and output to .WMV file. When I playback the slideshow in Windows Media Player v11, the first 3 or 4 slides play fine, with transitions and zoom/pan, then the slide show goes 100% black. After about15 to 20 seconds, a few more slide appear and function as designed. I can see that during the "blackout", slides were being prcessed because when they appear again, I am about 10 slides into the sequence, even though the blackout occurred after 3 or 4 slides. This repeats itself, blackout, then slides appear, blackout, etc etc. It was a 20 minute slide show.
The output was at 1024 x 768.
The original slides are 8 x10, 360 DPI, which is the resolution I have worked at for years in PS.
So... I created a smaller slide show with no transitions and no zoom/pans, and only about 20 slides. I still got the blackout issue.
I also launched the .WMV file in Nero and had the same issue, so the file itself has the blackout in it. It is not the player.
I then output to .WMV at 800 x 600 and this time it worked, even with the transitions and zoom/pan. No more blackouts.
Unfortunately, the quality is noticibly worse. I really need to stay at a higher resolution. So, I guess I have a myriad of questions and am for the most part looking for feedback, suggestion, etc.
Has anyone else experienced this issue?
Are there any ways to convert the slide show to a format other than .WMV? (i.e. AVI). I beleive to edit the slideshow in Premiere Elements where I could create other format, it first has to be converted to a .WMV file. This conversion is where the problem lies.
Thanks in advance....

My initial and probably most significant comment is
Seems like you now have 2880x3660 pixels in your photo files.I understand that it is a good resolution for printing however, .....
The odds are overwhelming that your photo file resolution is too high for slide show processing either in Photoshop Elements or Premiere Elements. And the black "photos" in your slide show output are symptomatic of that problem.
How many and when black photos appear in the slide show output will vary according to the resources of your computer (temporary files disk space can be very significant) as well as the number of photos, their resolution and the resolution of the output.
As an example, when the final outout will be a standard definition DVD( which is 640x480) for playback on TV or computer DVD player software, the recommended starting resolution for photo files is approx 1000 x 750 is for full screen 4:3 output. You want a higher resolution playback, so yes your initial resolution would be proportionally higher so that you can have sufficient resolution to zoom and pan.
What is the playback method and resolution that you want? Approximately how many photos are in the slide show?
You are probably familiar with the Process Multiple Fiels command that is in the Photoshop Elements Editor: it is a possibility for making the recommended descrease in photo file resolution to a copy of the photo. There is also an Export command in the Elements Organizer.
My second comment for now is that
there is an alternative to making a wmv file: it is a command that sends the definition of the slideshow to Premiere Elements 8 without ever making the intermediate wmv file. Depending on where you are in PSE 8 Organizer or Slide Show Editor, this command may be either Edit in Premiere Elementsor Send to Premiere Elements. However, I highly recommend that you not try this command until you have downsized the resolution of your photo files.
FYI: there are many more comments that are appropriate to discuss a slide show workflow from PSE to PRE and some of this discussion might bounce back and forth between the Photoshop Elements and the Premiere Elements forum.

Need help getting wmv file inserted on page to run on both mac and windows

I built my first webpage in iWeb, and when I tried to access the video page on my work pc running windows, it wanted to load in Quicktime (which is not configured to run wmv files on this machine). How do I set up the video on this page to run in Windows Media Player when loaded on a windows machine?
iMac (Intel) Mac OS X (10.4.7)

http://iWebFAQ.com/iFrame
OR
Create a hyperlink to WMV file in iWeb
OR
<object type="application/x-mplayer2" classid="6BF52A52-394A-11d3-B153-00C04F79FAA6" height="360" width="540">
<param name="fileName" value="http://iWebFAQ.com/movie.wmv" />
<param name="URL" value="http://iWebFAQ.com/movie.wmv" />
<param name="src" value="http://iWebFAQ.com/movie.wmv" />
<param name="allownetworking" value="internal" />
<param name="allowScriptAccess" value="never" />
<param name="enableJSURL" value="false" />
<param name="enableHREF" value="false" />
<param name="saveEmbedTags" value="true" />
</object>
OR
http://adobe.com/flash

Create elemntary file on card with applet?

Can anybody tell me how create and access to elementary file on card with javacard applet?
Thank you!!

Can anybody tell me how create and access to elementary file on card with javacard applet?
Thank you!!

What files does the slideshow create in Windows

I have just received a 60GB video ipod and am doing some homework before I go and start to load content. I am running Windows XP and have gone out and bought Adobe Photoshop Elements 4 to manage my pictures. Is this the only Win PC software that can work for creating slideshows? What extra files will this create, does it roll up the photos into a new large file with audio, is it just a pointer file for the ipod to understand where the pics are, what do I need to copy to my ipod apart from the actual pictures and what file do I run for the slideshow? If I have thousands of pictures, I presume I can just create separate slideshow files in the respective folders and then create a playlist of the slideshows? I thought I saw either wmv or pdf as the PC file formats that are created for the slideshows which I was a bit surprised at. Also, does the music I create for the slideshow remain separate or and just pointed to - can I use an mp3 file or do I ned aac (or is this just for video), or does it all get rolled up? Thanks for the newbie slideshow help. I've checked the forum but can't seem to find this info so hopefully I am not just repeating the questions.
Cheers

I have Adobe Elements 4 I know you can save your Photo Slideshow in wmv format. I love the new "panning" effect in Elements 4, I think that's what you refer to as the "Slideshow Video". However, I think you need to check out Microsoft PhotoStory 3 (a free download from Microsoft website). I'm no Microsoft fan, but honestly, you can create a video photo slideshow/PhotoStory in less than 5 minutes. Unlike Photoshop Elements, PhotoStory 3 is much easier because it uses the "wizard" approach. Check it out. In no time, you can create the video slideshow, save it in .wmv format. Then I use a tool to convert the .wmv file to .mp4 file.
People who asked why you would want to make a slideshow video obviously miss out the latest fun in sharing photos as moving pictures!!! It's so much fun than just watching static pictures with music. It impressed my friends so much!

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

PSE 8.0 windows 7 slideshow created but output to wmv file repeatedly crashes (with 1 exception)

Similar Messages

Maybe you are looking for