PSE 8 Does Not Recognize ACR 5_6 Udate

I updated following the instructions from Adobe's web site, during which time PSE 8 was shut down.
The file camera raw.8bi is now the only file in the folder: C:\Progarm Files\Common Files\Adobe\Plug-Ins\Elements8\File Formats. Its properties show it as version 5.6.0.148. However, when I open the converter and choose Camera Calibration the choices include ACR 4.4 and 4.2 but not 5.6.
Do I need to tell PSE 8 the new file is there? Could it be reading the file from somewhere else? I installed PSE 8 using the suggested program file location.
Thanks for any help.

Camera Calibration the choices include ACR 4.4 and 4.2 but not 5.6.
This doesn't mean you don't have the latest version of ACR. To check to see which version, go to Editor>Help>About Plug-in.
The calibration tab shows the versions where the profile for your particular camera model was updated, so that if you preferred the results you got under a previous version of ACR, you can use that profile instead.

Similar Messages

PSE 10 does not recognize my printer

PSE does not recognize my printer.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

Organizer (PSE 8) does not recognize DNG files

I recently upgraded to Elements 8 for Windows. Although I can load DNG files in to Editor, work with them and save them, the Organizer says it does not recognize this file type and will not load DNG files. In Windows Explorer, I had to associate my DNG files (I use XP) as being an Adobe Elements file so the install program clearly dropped the ball. Did not have this problem with Elements 7. Organizer recognizes my Camera RAW files just fine.

I am able to get DNG files in PSE Organizer 8.0 and didnot see any issue.
Could you restart your system and see if it works!
~V

PSE Elements 9 Editor does not recognize scanner

Mac OS 10.7 Lion. Adobe Photoshop Elements 9 Editor does not recognize my scanner (Epson 3170 Photo) even though scanner shows up in Preferences Print & Fax. Awkward workaround is to scan to desktop and open scan in PSE9.

Over in Windows, applications link to a scanner via TWAIN software, which is not included with Windows 7 - so the solution is to manually download the twain driver and install it
How do applications link to a scanner using a Mac, and does your OS include that driver?

HELP FAST! Need to go to my wedding-Lightroom 4 does not recognize Nikon D800 files

I try to import my d800 nef files and Lightroom does not recognize them and will not import. I looked on the site and it SAYS it supports them but nothing. I looked for a raw plugin but when I clicked the link it would not go anywhere. HELP! I don't want to shoot my wedding with this camera if LR can't support it and I have to return it to the camera store FAST if not.

Nidhaal Halid wrote:
Nikon D 800 is supported in the latest realease of camera raw. Make sure that you update the software to the latest version or download and install the latest version of Camera Raw 6.7 from the Adobe website.
But the question is about Lightroom. And Lightroom doesn't use any version of ACR. Lightroom 4 is somewhat compatible with ACR 6.7, and fully compatible with ACR 7.x. ACR 6.7 will read Lightroom 4 adjustments when an image is transferred to Photoshop, but it will not provide access to process 2012 sliders in ACR.

CS4 does not recognize some DNGs

My Panasonic GK2 creates raw files as RW2. I use (on my Mac) LightRoom 3.6 to import, convert to DNG and develop the files.
Photoshop CS4 Camera Raw 5.0 for Mac had been processing these without a problem. As of about 30 h. ago, it appears that my system no longer recognizes this format. DNG's from my Panasonic camera are greyed-out in Finder. In Adobe Bridge CS4 preview pane they are displayed with the DNG icon.
Please advise if update for Camera Raw is available, and if you think that might solve thie issue.
OTOH, believe I now have a viable work-around: after editing in LightRoom, export to PSD for further exiting in PS-CS4.

OK thanks, Station_two; I'm currently on a much older version of ACR. Downloading now.
See answer to next post regarding current results.
I used to see occasional update links automatically served, I believe, but could just as well be thiniking of other products. Surprised these do not come to us automatically.
============= Updated Posting ==============
Mac OSX 10.8.3 is not happy with the file just downloaded, Camera_Raw_5_7.zip.
Zip archive contains two files, Camera Raw.plugin ("Could not complete your request because Photoshop does not recognize this type of file."), and cameraprofiles.mpkg ("...can't be opened because it is from an unidentified developer. Your security preferences allow installation of only apps from the Mac App Store and identified developers").
I might be able to set back my preferences to allow the second to be installed, if that is the correct procedure. What do you think?
Not sure I mentioned this but I am still able process all DNGs using the Development tab of Lightroom 3. From there I can easily export to PSD for further editing in PS when needed. Also found that LR has a good print routine.
Still, a bit of a mystery why SOME of the Panasonic DNGs can be opened and others, of similar vintage, cannot.
Message was edited by: John W Cane

PSE 9 Dos not recognize NEF of D7000

I purchased a Nikon D7000 and read that PSE 8 would not recognize the NEF files for the D7000.
So I purchased PSE 9
When bridge opens it shows the NEF thumb nails for the D7000 BUT when I load the NEF pictures the pictures are white and a drop down menu appears saying that Bridge does not recognize the file.
Bridge accepts the jPeg's from the D7000.
If PSE 9 is designed to handle the D7000 can someone verify that and let me know if I have to make any adjustments.
Thanks
Greg

I realize that I sounded extremely negative BUT I have had Photo Elements since 2001.
I Never had a problem with any part of the software.
To me the main reason that individuals like me get Elements is because of its ease to work with compared to PhotoShop.
Let me list the problems that I am having :
Bridge
(1) The thumbnails do not show the picture
(2) You cannot attach to an email from Bridge.
(3) It now lists the file by date not consecutive numbering.
I contacted Nikon and they say it is a software issue not the camera.
Organizer :
(1)
It takes over an hour to load a picture from Elements (after you do a PP, even a simple crop) into organizer and it renders Organizer useless during the load process.
A window drops and says "Element Organizer is currently busy and cannot process the request".
Sometimes it shows the picture and says : "edit in progress" with a Lock symbol.
If you wanted to share or do anything else in Organizer you are stuck until it transfer the picture.
(2)
The email size has issues :
Big, medium level (slide bar with numbers) : never loads and I have to force quit Organizer and Mail
Very Big, medium level: looks like a postage stamp or never loads
Medium, any level size is Ok and what I have to use.
(3)
When I send a picture via email from Organizer from my ATT email address after it sends it, it puts it back in my MAC mail draft box.
I have to delete it and close mail out otherwise if I only delete it, it reappears again in the draft box.
(4)
I have not tried any of the other features, Facebook etc, Heaven only knows what else I would encounter.
(5) Periodic crashes of Organizer while in it.
(6)
The Notion that previously went from RAW edit to PSE for PP and the adjusted pictured stayed in Bridge or where I wanted to put it and now
Adobe decided that you need to use Bridge for RAW edit into PSE and then into another program (Organizer) is not the simplistic way it was originally designed for people like me.
(7)
These issues occur with both RAW and jPeg files.
In the past several PSE always had a separate MAC version that came out several months after the windows version.
This time they consolidated the versions and I am concerned that this was a mistake that is leading to these issues.
I am a MAC User and bought a new DLSR Nikon D7000, Which Adobe told me that I would have to upgrade to PSE 9 to allow Adobe to work with the D7000.
I am guessing that there are too many issues here and Adobe should have check any MAC issues and issued a separate software package.
If anyone from Adobe reads these posts and gets PSE 9 to work with a combined MAC and D7000 or just corrects their issues contact me so I can use this program again as I have used for 10 years with any issues.
Otherwise I will have to after the holidays be forced to look for new software.
Again I state that PSE was the easiest software I could use and now it is a nightmare.
I decided to drag and drop out of PSE to the desktop and load them in iPhoto and email from there.
Goodbye ORGANIZER !
Greg
I am not going to spend hours trying all kinds of gimmicks and 10 step workarounds which as a person with limited computer skills will only get into deeper trouble. I am already tired and frustrated spending the amount of time with this.
Greg

Photoshop CS6 Does not recognize my Nikon D800E

When trying to open my raw files in Photoshop CS6 it tells me that it does not recognize my camera or that the camera is too new. What do I need to download (Apple OSLion)to proceed?

Which version of Adobe Camera Raw (ACR) do you have installed?
Photoshop > About Plug-in > Adobe Camera Raw
The D800E is fully supported in ACR 7.1
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Photoshop Elenents 13 does not recognize my Canon Pixma Pro Mark II 9000 printer.

Photoshop Elements 13 does not recognize my Canon Pixma Pro Mark II 9000 printer. I get the following error message “The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing” and I cannot print.

I have been checking my computer files and find that PSE 13 is only the 32 bit system and my computer is a 64 bit system. In PSE 12 I was able to take the Adobe
Twain Driver (Twain 32 bit} in to the Optional Plug-in folder and then my Canon Scanner would work with PSE 12. My printer Canon Pixma Mark II 9000 worked with PSE 12. Now that I have upgraded to PSE 13 neither the scanner or my printer will work. There I no “Optional Plug-in Folder” in PSE 13. Is there some way that I can drag files into PSE 13 that will enable both my scanner and printer to work? My scanner is a Canon Canoscan 8800.
Or must I go back to using PSE 12.
Robbie

Lightroom 4/5 does not recognize memory cards anymore

I signed up for the Creative Cloud $10 PS/LR deal earlier this week. Previously I had LR 4 (and PSE). I'm a longtime LR user. The first time I used LR5 was today. The problem I describe started happening in LR4 as soon as I downloaded CC, before LR5 was even installed, and is continuing to happen in LR5. I have (and have always had) the option checked for the import dialog box to pop up when a memory card is detected. That is no longer happening as of the CC download. If I click on "import", it does show my memory card; the dialog box just does not automatically pop up. When the memory card is highlighted on the top left of the import dialog box, it states that there are no photos. This happens with all 5 of my memory cards, so I feel confident it is not a memory card issue. If I go further down on the left side of the import dialog box, I can click on the drop down arrow for my memory card and it will bring up the folder that is on the card (where the photos actually are). If I highlight this folder, the photos show up and I am able to import them. At times, Lightroom sees photos on the card that are already imported but does not recognize them as duplicates, but not always. I have searched for answers on this but have not found anything that pertains to my situation. Can anyone tell me how to get my import dialog box to automatically open again when I insert a memory card? Thank you.
ETA: I am using a Mac running OSX 10.8.5.

The virtual keyword is classified as a "future reserved word". In the current AS3 language spec it does nothing, and can safely be removed.
From the help:
"There are also several identifiers that are sometimes referred to as future reserved words. These identifiers are not reserved by ActionScript 3.0, though some of them may be treated as keywords by software that incorporates ActionScript 3.0. You might be able to use many of these identifiers in your code, but Adobe recommends that you do not use them because they may appear as keywords in a subsequent version of the language."
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3_Flex/WS5b3ccc516d4fbf351e63e3d 118a9b90204-7f9b.html#WS5b3ccc516d4fbf351e63e3d118a9b90204-7f6e

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

"Find my iPhone does not recognize New iPhone 5

I use my AppleID to "Find my iPhone" successfully on iPhone 4, iPhone4S, iPad, iMac. All show up. New iPhone5 iOS 6.0.2 uses same AppleID in the General iCloud settings, Contacts,email,photostream,safari bookmarks,reminders,notes, are all synced fine. I can even see how much storage is available in my iCloud account on the new iPhone5. The Problem is that "Find my iPhone" does not recognize the new iPhone 5. Yes location services is turned on. The iPhone5 can find its location in the map app, can find all other devices in "Find my iPhone" just not itself in "Find my iPhone" I tried a hard reset.
ANY IDEAS?

How about when the passcode is correct but not recognized?
I was prompted to enter a password to unlock the device when I downloaded IOS 7 several months ago.
Entered the password every single day for months, never a problem.
Yesterday I attempted to download the most recent IOS version and I was asked for a passcode before I could do that (my phone was unlocked). Online I found out the passcode is the unlocking password. It did not work and I was unable to use the phone for several minutes after 5 attempts. I just stored the phone and when home I charged it overnight.
This morning I unlocked the phone as usual and used it without a problem for emails, phone calls. etc.. Now, after not having used it for a while, I am asked for the passcode to unlock it as usual, and although I am sure I entered the right code, it is not recognized. I am unable to unlock my phone, although I have done it for months.
This is not a case of forgotten passcode! And I see it has happened to many others that use 4s and 5s iphones.
i could attempt the iTune connection fix, but it troubles me that all solutions are presented for forgotten pascodes, and in many cases actually the passcodes are not recognized. Which means, it will keep happening unless Apple offers a solution.

My computer does not recognize my printer

Dear Sir/Madam please can you help me my computer does not recognize my printer either by wireless or usb cable although I used to use it and it was good thanks ayman

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

My mac air does not recognize my printer.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

PSE 8 Does Not Recognize ACR 5_6 Udate

Similar Messages

Maybe you are looking for