PSE 8 - Help with Editing Group Layers

I am working with some templates right now that are apparently set up in Grouped layers.  I've looked into it, and the best result I can find is that I hav eto "simplify" the group in order to be able to edit the layers.  That doesn't seem to allow me to edit the layers individually, though. 
If layers are "grouped," does that mean I can't edit the layers?  Please Help!
Thank you!

Here is an action someone made just for that.
http://www.elementsvillage.com/forums/showthread.php?t=48026&highlight=layer+groups
This action opens the layer groups by deleting the layer group (set) while leaving
the layers inside.
So the layers will no longer be in layer groups (sets), but at least you will be able to see
what's inside the layer groups and edit those layers.
MTSTUNER   

Similar Messages

  • Help with Editing Raw in Lightroom 3.6

    Hello everyone!
    I am new to the forum and also to using lightroom. I just need some help with editing my RAW files. I shoot in RAW + JPEG and I just imported the files to lightroom. It didn't show me the jpeg files for importing so I only imported the RAW files, which I needed. After editing, I realised it said CR2+JPEG. Which means that both files were imported but combied into a single one. Now I basically want to edit my RAW files only. Does that mean I have edited a jpeg or a mixture of both files? How to edit only the RAW file?
    If my picture says CR2+JPEG, does that mean it isnt a pure RAW file and the editing would affect the image quality?
    I will really appreciate some help!

    It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
    There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
    Hal

  • Help with editing a template flash file..

    FIRST OFF..please don't shoot the noobee..I know some folks
    don't like the templates and I appreciate that.
    I have done some reading but not a whole lot about Flash. I
    certainly don't want to BUILD a flash (not yet), but want to edit
    one that is included in a template. I only want to edit the header
    that drops down. It says The Web STudio. I, for example, want it to
    say Marks Studio.
    Ok..the temp comes with Flash/non flash.
    I open w/flash and have a 3 folders: flash, psd and html.
    -flash folder has Images, fla doc and one flash html file
    -PSD folder has 3 psd files
    -html folder has flash folder, images folder, css file and
    one single index.html file.
    I opened the flash folder and found the image.jpg I wanted to
    change to Marks studio.
    I opend the PSD and found the slice that is the same as that,
    then edited it like I want it in PSD, then saved to replace the old
    image. top1. jpg
    Still, it is the same ole one that came with the temp.
    as I said, please don't shoot the noobe. I just wanna edit
    the flash file.
    Thanks for any help.
    Mark

    You'd need Flash to edit the FLA file.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "snipingkid" <[email protected]> wrote in
    message
    news:enev5r$p8l$[email protected]..
    > Hey guys,
    >
    > I need some help with editing a flash template, I have
    the .swf, .fla, and
    > .html file of this thing, I would like however to edit
    something on it....
    > Ive
    > tried everything, I have access to photoshop and
    dreamweaver 8... Im not
    > any
    > good at it but with decent help I could get something
    done. What I would
    > like
    > to edit is just text that flies in.... I would like to
    edit the text, how
    > do I
    > do it.... Thanksj
    >

  • Help with Saving Progressive Layers as Video or Files

    Hi, I am interested in creating an animated video with Photoshop. I have 80+ layers, each one building on the last. For example, layer 1 is a simple horizontal line ( - ). Layer 2 is a simple vertical line ( | ). With both layers on, they form a cross ( + ). Layer 1 must be visible for layer 2 to make sense, within the video. So, each previous layer must remain visible when the next layer is turned on. Then the next, then the next.
    Previously, I have manually saved layer 1 as a JPG, turned on layer 2 and saved the new file, turned on layer 3, saved the next new file,and so on, until I go through all layers. Then I used a video editing program to put the files in sequence and render it as a video.
    I am hoping PS (CS5) can help me. I need to render a video with each layer turning on (perhaps a .03 second delay, like in the animation strip) but with all previous layers remaining on. Onion skin's max layers is 8, so that doesn't work for me.
    If I can't render the video directly from PS, how can I create an action that will
    1. save file without a prompt as JPG with the layer name as the file name, in the directory where the PSD file resides
    2. make visible the next layer up (or down, whatever)
    3. repeat until all layers are complete, no matter how many layers

    They aren't necessarily only line drawings. As an animated video, it may be line drawings, then a photo, then drawings on the photo. So it's something like this:
    layer 0 = black background
    layer 1 = white vertical line
    layer 2 = blue horizontal line
    layer 3 = photograph in the upper left corner
    layer 4 = blue dot over the photograph
    An example of one of my shorter films is
    I did that by saving every layer as a separate JPG, then putting it together in a video editor. That's how I've always done it, but that won't work anymore due to the volume of the layers.

  • Help with editing a cell in a JTable. DESPERATE

    Hi! Is there someone out there that could help with some source code for editing a cell in my JTable when I run it as an applet??
    It works fine when I run it as an application.
    I manage to select the row and write a number in it, but I can't get out of the cell (it seems that the program stops??). I want to enter an integer in a cell and when I click enter or with the mouse in an other cell the value that I enter should update some other cell( multiply the entered value with some fixed number and update a cell in a second coloumn)
    I am really desperate now..... I have thought about using a MouseListener....
    I am using a tablemodel that is from AbstractTableModel.

    Are you using some cell editors?
    While converting inside them, you might be getting some exceptions (like parseexception)which is stopping you from proceeding further.
    Are you using your own tablemodel with custom datatypes?
    Hope this helps,
    Ramkumar

  • Help with Editable Regions

    We are in the process of creating a template for our site. We
    are working on the editable regions. What we are finding is if we
    want to add a bulleted list of items (let's say links) we can't do
    it without the list header also becoming bulleted. For instance
    let's say we have the following:
    Medical Resource Links
    Cardiology
    GI
    Respiratory
    We would want Medical Resource Links to be bold and stay to
    the left. The other three items we would want to have bullets.
    When we try this in an editable region all four items move
    over and only the first gets the bullet. Do we need an additional
    editable region for the title? Is this controlled via a CSS? Any
    help you can give would be greatly appreciated. We are beginners
    with this. Thanks.

    This has nothing to do with editable regions. It's all about
    the HTML on
    the page.
    Show us the HTML for your list, and I'll tell you why it's
    happening the way
    you describe.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "DONNA6985" <[email protected]> wrote in
    message
    news:edme63$o0m$[email protected]..
    > We are in the process of creating a template for our
    site. We are working
    > on
    > the editable regions. What we are finding is if we want
    to add a bulleted
    > list
    > of items (let's say links) we can't do it without the
    list header also
    > becoming
    > bulleted. For instance let's say we have the following:
    >
    > Medical Resource Links
    > Cardiology
    > GI
    > Respiratory
    >
    > We would want Medical Resource Links to be bold and stay
    to the left. The
    > other three items we would want to have bullets.
    > When we try this in an editable region all four items
    move over and only
    > the
    > first gets the bullet. Do we need an additional editable
    region for the
    > title?
    > Is this controlled via a CSS? Any help you can give
    would be greatly
    > appreciated. We are beginners with this. Thanks.
    >

  • Need help with editing flash

    Hello everyone, I'm really new to flash and I have some problems with editing my flash file. Currently, I have a small flash application  in a folder, containing various kinds of files such as AS, SWF, FLA, HTML. What I want to do is to change the text inside one of the buttons in the application. After doing some reasearching, I realized that I should probably make some changes to the FLA file(Quiz.fla for example) since Quiz.fla is the only FLA file in the folder. Therefore, I opened it using Adobe Flash CS5.5, what what I found out is that the Quiz.fla file  is really different from other FLA files. It only shows a plain background when I open it, without showing the actual interface of the flash application. It does contain all the buttons and contants under the Library section on the right side of Adobe Flash . When I try to change the text inside the button then save-publish, the newly published SWF file  would just be a static picture of the button I've changed and everything else is gone. Any help is greatly appreciated!

    ya, that's why I'm confused. I've actually tried editing some sample flash FLA files and all I need to do is to edit them in the Library and it would work out. But this one seems to have some weird problems. I could actually send the application folder to you if you have some time to take a look at it. Thank you very much again for the help!

  • Pse help with syncing and nonpurchased music from itunes to iphone using icloud

    Pse excuse myself for being such a noob. I am trying to sync music from which i have ripped from cd's to itunes using icloud. When i go into the purchased section there is no music to sync obviously as i havent purchased any music only ripped cd's. I beleive that this is where the music has to go to in terms of syncing to iphone. Is this correct or am i way off pse help guys.

    it says that I gotta reset my iPhone to Factory Settings. Which means I will lose all my apps, contacts and stuff.
    Why would you lose anything? Your contacts will be in whatever desktop program you have chosen to sync your contacts with, your Apps should be in your iTunes Library, and everything else should be on your computer too (assuming you've been syncing/backing up as designed).
    Are you trying to sync music from a different computer than you normally use?

  • Help with a group query

    I have the following table
    EX_ID
    EX_NAME
    EX_SURNAME
    EX_FLAG
    1
    TOM
    JONES
    Y
    1
    JIM
    SLIM
    N
    1
    BO
    SELECTA
    Y
    2
    AIRES
    BEARS
    N
    2
    JIM
    DAVIES
    Y
    3
    PAUL
    BALL
    N
    3
    YOU
    KNOW
    N
    I need to create a query that only displays one of the ex_id’s, it doesn’t matter which one.  When the query has been run it will look like below:
    EX_ID
    EX_NAME
    EX_SURNAME
    EX_FLAG
    1
    TOM
    JONES
    Y
    2
    AIRES
    BEARS
    N
    3
    YOU
    KNOW
    N
    Can anyone help with this query?

    SELECT * FROM
    SELECT *,ROW_NUMBER () OVER (PARTITION BY ex_id ORDER BY (SELECT 0))
    FROM tbl
    ) AS Der WHERE rn=1
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Need a Little Help with Understanding How Layers Work in PSE

    I have PSE version 5 and I am using it on a PC with Windows XP.
    As I get more into editing photos, I am enjoying it, but confusion is also starting to set in.  My question is about layers.  When I go to edit a photo for web/email use only, I start by resizing it to 72 ppi and then reducing the pixel dimensions quite a bit.  Then after that I normally go through this process of editing the photos by using normally about three different commands.  One is Levels, then I may go to Shadows/Highlights, and then my last command is always sharpening.  I used to do this all on one layer, but then finally learned to put each one of these editing features on their own layer so I can make changes/deletions without too much trouble.
    When I started doing the separate layers, I was just making a copy of the background layer each time and then touching that particulay layer up with Levels, Sharpen or Shadows/Highlights.  But I noticed that depending on the order in which the layers were placed, some changes would be obscured.  If I put the Levels layer on top, and then the Sharpen layer and the Shadows/Highlight layer below that, the sharpen effect and the shadows/highlights effects were no longer there.  I could only see the levels effect.  The photo was still not sharp and so on.  If I put the Sharpen level on top, then the photo showed the sharpen effects, but now the Levels and Shadows/Highlights effects were no longer visible.
    So then I started to make a copy of the background initially, do a levels adjustment here, then, instead of making a copy of the original background layer again, I would make a copy of the layer that now has the levels changes on it.  Then do the sharpen effect on this layer.  This way I had all the changes on one layer as long as I put that layer as the top layer.  But then I realized that I once again fI didn't have a layer with only one fix on it.   Finally, I started to use an adjustment layer for Levels, put this as the top layer, make a copy of the background layer, do shadows/highlights, copy background layer again, do sharpen, and this seems to work a little better.  But even with this way, depending on what order I place the sharpen and shadows/Highlights layers, one of them still seems to get obscured by the layer above it.
    Can someone help me to understand how layers work in this regard.  I am obviously a little confused here.
    Thanks,
    Lee

    You really aren't working efficiently. First of all, do your editing on a full sized version of the photo, since you have more data for PSE to work on and will get better results. Use save for web to make your web/email copy when you are totally done. You can resize it down on the right side of the save for web window.
    Duplicating a regular layer makes an opaque layer that obscures the layers below it. It's best to start off by not working on your original image, so that you don't have to worry if you mess up. If you're working on a copy, you can work right on the background layer, or only duplicate the layer once and apply your changes to that. So you'd apply both shadows/highlights and sharpening to the same layer.
    Finally, you should use an adjustment layer for levels. Layer>New Adjustment Layer>Levels. This will put levels on a transparent layer above your image, but you will need to click the layer below it to get back to a pixel layer to apply other changes (you can't sharpen an adjustment layer, for example).

  • Need Help with Photomerge Group Shot

    I'm trying to photomerge a group shot and having trouble with it.  The person I'm trying to cut out of the source photo gets plopped into the middle of the final photo and I can't line her up with in final shot.  Is there a way I can relocate the section that gets pasted into the final photo?   I'm also have trouble with aligning the photo--how do you know what points to select in the fist and second photo?  I've been playing with it, but the photos get terribly distorted.
    Appreciate any help.  I was expecting Photoshop Elements 10 to make this easy, and so far, it hasn't impressed me.
    Thanks,
       Terri

    OK, here we go:
    Make a selection (in the main image) of the area you want to be replaced:
    Open your other image, select the head to use, and copy it to the Clipboard.  (I simply used another one of the heads in this photo.)
    Back in the main image, use Edit...Paste into Selection:
    Change to the Move Tool and move the pasted-in image to where it looks best:
    You already know what to do next with the Clone Tool.   (Probably have to use Layer...Flatten Image to get rid of all the selections and layers so the Clone Tool can do its work....)
    Ken
    P.S.,  Looks like you did a real good job with the girl on the left.
    P.P.S.,  The image is a bit too small for us to do precision work (but it's OK for this example).  Next time you can try something about 2 or 3 times larger and see if the forum software accepts it.

  • Help with "edit in" most items grayed out

    I am not able to use anything but Edit in Photoshop and open as a smart object under "photo" in the drop down dialog. Please help me so that I am able to edit in Camera Raw, merge to Panorama, HDR, another application and open as layers from Lightroom.
    I currently have Lightroom 2.0, Camera Raw 4.5 and I just installed the upgrade patch of Photoshop CS3 so I am using 10.01. I thought that maybe this patch would work....but to no avail. I am using XP Pro for Windows. I re-loaded my entire system and decided to only install 2.0.... rather then 1.4 and then 2.0 as I was having problems with Lightroom this way as well. Thanks so much I really appreciate any assistance with this issue.
    Ruth

    Thanks so much. Actually that is a good point about selecting multiple photos. I had not done that as I didn't think that the program was working so I was editing through Bridge. Also Ian I will try the upgrade and see if that fixes the problem. I use Camera Raw all the time so I was really discouraged when it didn't show up after the CS3 patch. I will keep you posted as to whether your suggestions worked or not....thanks for your quick replies Rob and Ian!!!

  • Help with processing groups of records in database

    Ok i'm at work right now trying to finish up a project for my class and what it is is a basic class to process an inner join sql statement generated table from access and order it by the student id in order to group each student together. I have written the sql statement and logic to access the database and return the array of row objects to the command line so i know it is grouping and returning info properly. I have written the conditional if statement to get the gradePoints for A = 4, B = 3, C = 2, D = 1, and F = 0 in a class method (KEEP IN MIND THE GENERATED TABLE CONSISTS OF SID, NAME, COURSE#, COURSETITLE, AND LETTERGRADE) now I just need to process each group of students individually and calculate their overall gpa's. Here in lies the problem. I imagine i need to define current student variables as like
    currentID = s[0].getStudentID();
    currentName = s[0].getStudentName();
    then loop through the values of the array with something like
    for(int j = 0; j < s; ++j)
    if(s[j].getStudentID != currentID)
    Process the grade records for the group Then reset the
    current student to the next in line with another variable
    assignment like
    currentID = s[j].getStudentID();
    currentName = s[j].getStudentName();
    }(end of if)
    Process the row object for the student created by this loop and then add it to the output string
    } (end of for loop)
    Ok so where i need help is the logic to process the grade records for the individual groups and then processing the row object. We haven't gone over anything like this in class and it is the last thing on my list to to do so any help would be appreciated. Also, if you think i'm an idiot keep it to yourself please it's not fun for people who really need help and really would like to know for future reference how to do something to be belittled. Thanks again
    Matt
    Message was edited by:
    djmd02

    sorry i guess is hopuld explain this better...I know
    sql relatively well and the sql statement for my
    query string is rediculously long with two inner
    joins and what it returns is the sid, name,
    coursenumber, coursename, and lettergrade So if you know SQL so well, why haven't you created a ViEW using this "ridiculously long" query and made your life easier?
    Two inner joins? Nothing extraordinary about that.
    this query
    generated table is then used to populate an array of
    objects for each entry in the table. They are already
    put in order depending on sid by the sql statement
    (for example)
    11111 matt deClercq 3380 intro to java A
    11111 matt deClercq 3382 database management A
    11112 john doe 3380 intro to java A>
    and so on. The problem i am having is within the for
    loop to detect the end of each student and process
    their grades for each class and calculate the gpa for
    the whole group of grades that that student has.SQL is a declarative language, not procedural. If you're "looping", it suggests to me that you're pulling all that data into the middle tier and doing the calculation in Java.
    I'm suggesting that there's a perfectly good way to do this calculation in SQL without using your ridiculous query. You might be better served if you try and figure out what that is.
    Hope this makes things a little more clear and makes
    me look a little bit more intelligent than i seemStop worrying about what people think and concentrate on your problem. You're a student. It's unlikely that you're going to appear to be on the level of Bill Joy at this point in your career. I'd be a lot more impressed if you'd stop whining about how people perceive you.
    %

  • Newbie help with editing files in DW CS3

    I am new to using Dreamweaver, and I am having trouble with
    trying to edit existing files using DW CS3. When I open an existing
    file on my local site, DW converts some of the code using &.
    This is a problem because I need to edit the file just as it was
    originally written, so I can save it after editing and upload to my
    website.
    In my Preferences, I have Code Rewriting set to:
    -Rewrite Code: Fix invalidly nexted and unclosed tags
    [Unchecked]
    -Rewrite Code: Rename form items when posting [Checked]
    -Rewrite Code: Remove extra closing tags [Unchecked]
    -Never rewrite code: In files with extensions .as .asr .asc
    .asp .ascx .asmx .aspx .cfc .cfm .cfml .config .cs .ihtml .js .jsp
    .php .php3 .vb .xml .xsl .xslt .xul
    -Special characters: Encode <, >, &, and " in
    attribute values using & [Unchecked]
    -URL encoding: Do not encode special characters
    -Active Content: Insert using browser-safe scripts [Checked
    by default]
    -Active Content: Convert tags to scripts on file open
    [Unchecked]
    Today, I opened a file with an .xml extension, and DW rewrote
    the special characters > and '. Since I have in my preferences
    to Never rewrite code in .xml, I don't understand why DW is
    rewriting the code. Also, in my preferences I have unchecked the
    Special Characters, so why is DW still rewriting the code?
    Do I have some of the Code Rewriting preferences set wrong?
    Is there another place I need to tell DW not to rewrite
    existing code?
    Thanks for your help!
    Cyndi

    It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
    There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
    Hal

  • Need Help With SQL GROUP BY and DISTINCT

    I am working on a project and need to display the total of each order based on the order id. For instance I want to display the order id, customer id, order date, and then the extension price (ol_quantity * inv_price).
    I would then like a total displayed for order # 1 and then move on to order #2.
    Here is my SQL code :
    SELECT DISTINCT orders.o_id, customer.c_id, inv_price * ol_quantity
    FROM orders, customer, inventory, order_line
    GROUP BY orders.o_id, customer.c_id, inv_price, ol_quantity
    ORDER BY orders.o_id;
    When my code is run it displays the order id, customer id and inv_price * quantity (extension price) but no order total for the order number and a new group is not started when a new order number is started....they are all clumped together.
    Any help is greatly appreciated!!

    Hi,
    user12036843 wrote:
    I am working on a project and need to display the total of each order based on the order id. For instance I want to display the order id, customer id, order date, and then the extension price (ol_quantity * inv_price).
    I would then like a total displayed for order # 1 and then move on to order #2.
    Here is my SQL code :
    SELECT DISTINCT orders.o_id, customer.c_id, inv_price * ol_quantity
    FROM orders, customer, inventory, order_line
    GROUP BY orders.o_id, customer.c_id, inv_price, ol_quantity
    ORDER BY orders.o_id;
    When my code is run it displays the order id, customer id and inv_price * quantity (extension price) but no order total for the order number and a new group is not started when a new order number is started....they are all clumped together.
    Any help is greatly appreciated!!Sorry, it's unclear what you want.
    Whenever you post a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say what version of Oracle you're using.
    Do you want the output to contain one row for each row in the table, plus an extra row for each distinct order, showing something about the order as a whole (e.g., total inv_price or average extension_price)? If so, you need GROUP BY ROLLUP or GROUP BY GROUPING SETS .
    If you want one row of output for each row of the table, but you want to include something that reflects the group as a whole (again, e.g, total inv_prive or average extension_pcie), then you can us analytic functions. (Most of the aggregate functions, such as SUM and AVG have analytic counterparts that can get the same results without collapsing the result set down to one row per group.)
    Here's an example of how to use GROUP BY GROUPING SETS.
    Way we're interested in employees' salary and commission from the scott.emp table:
    SELECT       deptno
    ,       ename
    ,       sal
    ,       comm
    FROM       scott.emp
    ORDER BY  deptno
    ,            ename
    ;Output:
    `   DEPTNO ENAME             SAL       COMM
            10 CLARK            2450
            10 KING             5000
            10 MILLER           1300
            20 ADAMS            1100
            20 FORD             3000
            20 JONES            2975
            20 SCOTT            3000
            20 SMITH             800
            30 ALLEN            1600        300
            30 BLAKE            2850
            30 JAMES             950
            30 MARTIN           1250       1400
            30 TURNER           1500          0
            30 WARD             1250        500Now say we want to add the total income (sal + comm, or just sal if there is no comm) to each row, and also to add a row for each department showing the total sal, comm and income in that department, like this:
    `   DEPTNO ENAME             SAL       COMM     INCOME
            10 CLARK            2450                  2450
            10 KING             5000                  5000
            10 MILLER           1300                  1300
            10                  8750                  8750
            20 ADAMS            1100                  1100
            20 FORD             3000                  3000
            20 JONES            2975                  2975
            20 SCOTT            3000                  3000
            20 SMITH             800                   800
            20                 10875                 10875
            30 ALLEN            1600        300       1900
            30 BLAKE            2850                  2850
            30 JAMES             950                   950
            30 MARTIN           1250       1400       2650
            30 TURNER           1500          0       1500
            30 WARD             1250        500       1750
            30                  9400       2200      11600(This relies on the fact that ename is unique.) Getting those results is pretty easy, using GROUPING SETS:
    SELECT       deptno
    ,       ename
    ,       SUM (sal)          AS sal
    ,       SUM (comm)          AS comm
    ,       SUM ( sal
               + NVL (comm, 0)
               )               AS income
    FROM       scott.emp
    GROUP BY  GROUPING SETS ( (deptno)
                             , (deptno, ename)
    ORDER BY  deptno
    ,            ename
    ;Notice that we're displaying SUM (sal) on each row. Most of the rows in the output are "groups" consisting of only one row from the table, so the SUM (sa) for that goup will be the sal for the one row in the group.
    Edited by: Frank Kulash on Nov 23, 2011 2:03 PM
    Added GROUPING SET example

Maybe you are looking for