PSE 8 Mac & Time Machine Activation

Hello, I Am using Photoshop Elements 8 Mac For OS X 10.6 Snow Leopard, All is working ok. and registered and activated ok. But have one issue about your activation process.
I Have made a OS X 10.6 Time machine Backup as Of Today which includes Photoshop Elements activated but My Concern or question is:
1) Should I De-Activate photoshop elements 8 Before I Do A Complete Time Machine Restore Even though the backup has the activation within the Saved backup?
2) If not what do you reccomend on how to do a restore using time machine with PSE 8 Saved in The Backup file?
3) If I We ́re to activate and de-activate many times, would adobe block me from activating again as I Use Time Machine quite often sometimes?
4) is the ́re a limit of how many times I Can activate this product within a give time of period?
all these questions are related to TIME MACHINE FOR OS X 10.6 For 1 Computer

To clarify, the limit is two hard drives, but only adobe knows how many times you can activate/deactivate/activate on those drives before you get the dreaded Contact Adobe message.
Merely including PSE in your backup doesn't constitute using it--it's when you launch it that it activates.

Similar Messages

  • I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

    I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

    I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
    E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
    E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
    I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

  • I have a wd mybook for mac.time machine cannot back up

    i have a wd mybook for mac.time machine cannot back up

    Hi..
    Try the troubleshooting help here >  Mac Basics: Time Machine

  • Replacement needed for the Apple sabotaged Mac Time Machine

    At the time that the new Apple Time Capsule device came out, I think Apple released an "update" to Time Machine to make it fail. In the good old days, you could start a backup to a drive by connecting the WD drive to each Mac so that it could do the HUGE backup more quickly. THEN you would move the drive to the Apple Airport Extreme WiFi router where the tiny add-on backups would continue. It worked perfectly for 5 years for me.Then the new Time Capsule came out. Time Capsule is an Apple product that is an Airport Extreme with a 1 or 2 TB drive inside.Now, all of a sudden, the file types and names for locally made backups are DIFFERENT!When you back up all your Macs and take the WD drive to the Apple Airport Extreme (Wi Fi Router) it will not build upon the files it finds. Instead it starts OVER at WiFi speeds. Days go by. Still not done. More days. More. More. This is NONSENSE!On top of this horror, Time Machine now gives up on a WD disc when it's about 1/2 full saying, "The disc is OK, but it can't be used any more. Please provide a new disc unit." What an outrage! So I get a 100 TB drive only to have Time Machine give up on it when it reaches 500 GB of stored backup data?What I WISH WD would create is a replacement for Time Machine which is now so full of malicious code as to be nearly completely unusable. Any WD software that will handle multiple machines and does incremental backs up by itself, in the background, perhaps every hour would be fine.  I know you can do it WD! Please? Sherman Keene

    First off, you are in the completely wrong forum for a question like that. I don't even know how you ended up here.
    I haven't used Vista, or do I plan to, so I'm not sure if it does or not. Windows Server 2003 has a function called Previous Versions that is much like Time Machine (just without the fancy graphics). In W2k3 Server you can get to this by right-clicking a folder and selecting Previous Versions on the client side and Shadow Copies on the server side. This may or may not be in Vista, I'm not sure, but maybe it can get you somewhere.

  • Can an external Mac/Time Machine hard drive be connected with Airpot thru USB for wireless backup

    I purchased a seagate 3 tb hard drive and planned on connecting it to my airport via usb. I setup the drive and did the full time machine back up of my imac. I then powered down the airport and the hard drive. I then plugged in the drive and airport and then powered them up. The airport lite up green then went yellow and stopped broadcasting.
    Can these two work together like Time Capsule does?

    I was sort of in the same boat. I ended up getting a 4th generation TC about six months ago. I only got the 2 TB model as I have a number of those WD My Passports laying around. I decided to use the TC's internal HDD as a NAS and use a powered USB hub with two My Passports attached to them for Time Machine backups. I use the 500 GB for my Mac mini backups and the 750 GB for my two other Mac laptops.
    I could have just as easily switched to using the intenal HDD for Time Machine and the My Passports for the NAS. However, I wanted better to use the better transfer rates of the internal drive for my NAS.

  • Issue trying to use old Mac Time Machine backup on new Mac

    I've just got a new iMac 27" to replace my old 21" and am planning to restore files from the Time Machine backup I have. On the iMac 21" I used an external hard-drive connected to an Airport Extreme Base Station to back up using Time Machine. On the new Mac the external drive is connected directly to the USB port. The old machine is now about 10,000 miles away from me.
    The issue I have is I cannot read the back-up from the old machine on the new.
    During the first startup I tried to read from the Time Machine backup but the system told me I could not use it because it was from a different machine - it read all the back-up dates and let me chose, but did not allow to use it.
    After startup was completed, I run a software update to make sure everything had the same version and tried Migration Assistant (with the HD still connected to the USB port), but the wheel keeps spinning not finding any disk.
    I can read the .sparsebundle file on the external drive and I see it is intact. Disk Utility recognizes it and Status is Not mounted. When I try to open it with Disk Utility it says it is not mountable.
    Any of you know how I can resolve this? I am thinking of a way of opening the file and reading it.
    I really just need my music, my movies and my pictures, but I have 1.2T of that so it is not something I can download from the old Mac.
    Thanks a lot in advance.

    I've just got a new iMac 27" to replace my old 21" and am planning to restore files from the Time Machine backup I have. On the iMac 21" I used an external hard-drive connected to an Airport Extreme Base Station to back up using Time Machine. On the new Mac the external drive is connected directly to the USB port. The old machine is now about 10,000 miles away from me.
    The issue I have is I cannot read the back-up from the old machine on the new.
    During the first startup I tried to read from the Time Machine backup but the system told me I could not use it because it was from a different machine - it read all the back-up dates and let me chose, but did not allow to use it.
    After startup was completed, I run a software update to make sure everything had the same version and tried Migration Assistant (with the HD still connected to the USB port), but the wheel keeps spinning not finding any disk.
    I can read the .sparsebundle file on the external drive and I see it is intact. Disk Utility recognizes it and Status is Not mounted. When I try to open it with Disk Utility it says it is not mountable.
    Any of you know how I can resolve this? I am thinking of a way of opening the file and reading it.
    I really just need my music, my movies and my pictures, but I have 1.2T of that so it is not something I can download from the old Mac.
    Thanks a lot in advance.

  • Backing-Up 2 Macs + Time Machine Using Wireless Hard Drive Issue

    I am trying to use Time Machine to back up my iMac & MacBook wirelessly.
    I have a Western Digital MyBook Essential and an Iomega iConnect wireless USB data station.
    I partitioned the WD hard drive so each Mac has its own partition per WD's helpline instructions. Time Machine works just fine with the WD pugged directly into the Macs via USB. The Time Machine back-ups exist in the correct places.
    The issue is that I am unable to use Time Machine wirelessly. I can mount the partitioned drives just fine on the desktop and am able to access content wirelessly just fine. The iOmega iConnect (which is configured correctly for Time Machine) recognizes the drives just fine. However, when the WD hard drive is connected wirelessly, Time Machine doesn't see it (even though it is on the desktop) and so am unable to back-up.
    Any thoughts?

    brit66 wrote:
    I was told by Iomega that it is (and it's on the box). Plus it has a specific Time Machine setting to enable TM. So I have to presume that it is compatible.
    Yes, I finally found that under Settings.
    It adds a subfolder, which is not the way Time Machine normally backs-up, so it must be intercepting the instructions Time Machine is sending (or perhaps the sub-folder it sets up is actually a sparse bundle disk image.
    In any event, you'll have to contact iomega for help.
    As explained in the link in my previous post, a NAS is fundamentally different from an external HD; it has it's own operating system, so you have to use the setup, etc., instructions provided by the vendor. Also this type of setup often means you cannot do a full system restore.

  • Partitioning Hard Drive for Use with Mac (Time Machine) and Windows

    I have a brand new Imac on which I am also running WIndows Vista through Boot Camp (sweet, by the way). I have a large external hard drive on which I set up Time Machine easily enough. I would like to partition the drive somehow so that I could use half the drive to separately back up files on the WIndows side, but I can't seem to do this. Any suggestions? Is this even possible with Time Machine?

    You can use Disk Utility create two partitions. Choose FAT for the Windows partition and Mac Extended (Journaled) for the Mac. One limitation of FAT32 is that you can't write files bigger than 4GB. You can reformat this partition as NTFS within Vista which will allow bigger file sizes but you won't be able to write to this partition from within OS X without other utilities. Also you can't write to the OS X partition from Vista without other software.
    Time Machine will not be able to back up the windows formatted drive partition.

  • Formatting an external hard drive for Mac/Time Machine.

    Hello-
    Just purchased a Time Capsule to use both as a wireless Network and backup hard drive. Both are working great. However, I have an external hd (500 gig "My Book") I used with a previous computer (PC). I would like Time Capsule/Time Machine to backup everything on the My Book external hd but I realize I need to reformat in order to have the Time Machine backup this drive. It appears that the only way to reformat the external hd is to erase it's contents. This isn't an option for me as this drive is almost full and has a ton of data I do not want to lose. Can anyone elaborate on how I can reformat this disk so it will be compatible with my new setup without losing any of it's contents? Thank you for your time and help.
    Matt

    Some 3rd-party apps, such as iPartition, claim to be able to do that. But they +*very prominently+* warn you to back up first, in case something goes wrong. And there have been a few posts here where something did go wrong and the user hadn't backed-up, so lost everything.
    iPartition (and I think all the others) cost money, of course. Instead of spending it there, your best bet is to get another external HD, a larger one. Copy the data to it, reformat the WD, and copy it back. Make sure Time Machine is backing-it up to your Time Capsule (ie., not listed in the exclusions box of +Time Machine Preferences > Options).+
    Then erase and partition the new one. One partition should be at least as large as your Mac's internal HD, the other 500 GB or more. Use this drive for "secondary" backups of both, via CarbonCopyCloner or SuperDuper. [CarbonCopyCloner|http://www.bombich.com> is donationware; [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling.
    You might even want to get a portable HD for this, so you can take it off-site and also be protected against fire, flood, theft, direct lightning strike on your power lines, etc.

  • HT201250 Unexpected problem with Mac time machine!

    Hi every one!
    I'm having an unexpected problem with my time machine! the moment I hook up the back up drive my Mac crashes and the only thing I can do is to force restart. I'm not sure if the problem is with the back up disk or the Time Machine itself. I've successfully used the app since now and this just happens! I can neither access the disk in finder nor fix it by disk utility... would you please help me?
    PS. the disk is encrypted, I doubt that might be causing the problem?!    
    Thank you!
    chargar

    Launch the Console application by entering the first few letters of its name into a Spotlight search. Enter the name of the crashed process in the “Filter” text field. Post the messages from the time of the last crash, if any -- the text, please, not a screenshot.
    Then, still in the Console window, look under User Diagnostic Reports for crash logs related to the process. Select the most recent one and post the contents -- again, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

  • IMovie deleted itself!  No time machine active.  How can I retrieve it?

    I removed iMovie from the dock.  It was not in the applications folder anymore.  I was not running time machine when this happened.  How do I retrieve it without having to spend $15 on a new iMovie?

    Removing iMovie from the dock should not delete it from the Applications folder. However, if you delete it from the Launchpad, it will delete it from the Applications folder.
    If you have a retail copy of iLife 11, you can reinstall from DVD.
    If you bought iMovie from the Mac App Store, you can open the Mac App Store, make sure you are signed in with your Apple ID, and find it in your installed apps. You can download it from there.

  • How do I restore my PS CS6 actions pallet from my Mac time machine?

    Because of a corruption in my old computer I am unable to do a full time machine restore to my Mac computer which is running OSX. They had to wipe the computer, and I have to re-download all the software from providers website. I can drag preference files, photos, and documents in from time machine. Now that I've downloaded Photoshop CS6 again. How do I go about restoring my previous actions pallet?
    Thanks for you help!

    Sure it does, on my generic USB Logitech keyboard it is the one with the windows symbol on it.
    Additionally if you are using a wireless Logitech keyboard, it might not work because it may not be paired with the computer at startup. In that case, you may have to use a USB keyboard to invoke startup commands.

  • A script/applet to indicate Time Machine Activity?

    Hi,
    I have just started using the Time Machine, and believe that it should have an activity indicator somewhere unobtrusively (perhaps in the dead 4 mm to the right of the Spotlight "magnifying glass" icon?). I am using a 500Gb LaCie drive for back-up, connected by a FW800 cable to my MacBook Pro. At times, I'd like to pack it up and go, but must open the System Preferences first, to make sure that the disk is not in use by the Time Machine at the very moment. The indicator should also offer a way of halting the back-up, in case I need to eject the back-up disk, pack up the MBP and go. (I do carry it around to all meetings and such during my work-day!)
    I have posted a similarly-worded suggestion in Apple's feedback site. Until they do implement such a thing, does anyone know of an existing script or applet (or can write one) that would offer this?
    Thanks, Tristan

    First, it's great you have submitted this suggestion to Apple FeedBack. That is the only real way to get Apple's attention. More people should adopt this approach for suggestions like this.
    1. TM backup activity is shown in two places. It's shown by two rotating arrows in the Finder's sidebar to right of the TM backup volume. The second place is the TM Pref panel itself.
    2. The TM backup can be stopped by clicking the "x" icon to right of the backup progress bar in the TM Pref panel.
    3. If you pack up your MBP (i.e., shut it down) while TM backup is in progress a warning message window will be displayed and you can either quit the backup or let it complete.
    4. One could also use Activity Monitor and simply Quit the backupd process - but don't recommend this.
    5. I'm unaware of any readily available script or drop-on Applet for doing what you've requested.
    The above techniques shouldn't take too much effort on your part prior to packing up your MBP.
    Good luck....

  • Access individual files on old Mac time machine back up from new Mac

    Hi
    I have a never Mac Book Pro with 10.9.1 I am using now. I have a old time machine on a external drive that was made with a old Mac Pro The time machine back up is over 15 TB and I no longer own the Mac Pro used to make the time machine backups. I want to access the old time machine back up and copy over a only a few files I need about 500. I cannot use migration assistant because I cannot move the entire back up as the entire back is too big.
    Thanks

    right click on the folder that shows with the red negative sign, and select to "get info".  In the long skinny window that appears, look in the "sharing and permissions" section.  In the "name" column, you should see your current user name.  Ensure the "privilege" is set to Read and Write.  If your user name is not in the name column, click the + sign, and add it, ensuring the privileges are set to Read and Write

  • Time machine Active directory

    I need to restore an Active Directory user account from Time Machine backup.
    Aftrer reinstall the OSX I use "Migration Assistant" and I was unable to find into Time Machine backup the Active Directory user account.
    Into this backup I can restore ONLY the local machine account, not network (AD) account.
    What's wrong?

    I don't use Active Directory, and know almost nothing about it.
    But Time Machine, like most backup apps, cannot back up from any network location.
    Were you ever able to see backups of that account?  If not, it wasn't backed-up. 

Maybe you are looking for