PSE 8 Organizer file format

How is it possible to change the file format that PSE 8 Organizer uses to save files? E.g. if I use the function to cut a picture then a new copy of the file is saved in a low quality jpeg format. How can I change this format or change the quality options?
Thanks for any hints.
wkr mhuew

Thanks for your response. But maybe my question was not clear enough. If I start to cut a picture in PSE 8 Organizer (not in editor!) then there is a window to choose the area where to cut. If I press now apply then a new copy is saved automatically in a file with a low quality jpeg format. How can I change this default format or the quality options of this format?
wkr mhuew

Similar Messages

How can I change the default file format in PSE 10?

I just upgraded from PSE 6 to PSE 10. In the former, the default file format when saving an edited image in the editor was psd. In 10, it is jpg. I prefer to save in psd, which means I have to select psd from the format drop-down menu for each save. I've looked for a way to change the default but can't find one. Is there a way?

Ah, I see that you're right -- editing that doesn't require adding a layer defaults to saving as the original image's file type. Adding a layer causes the default "Save As" file type to switch to PSD.
I don't know of any way to change that.
Ken

Not supported file format in PSE7 organizer

Hi,
I'm facing the a problem with a Nikon D40x: the downloader tool in PSE7 is not working with my camera (in contrast to the PSE5 one). It does not recognize the file format of the .NEF files stored on the SD-card. This hold true also for the organizer: it is not possible to import photos lying on the harddisk into the organizer (invalid file type). the open dialog does not shop those files as media files. Only in the 'all files' view they are visible but not loadable. Surprisingly it is possible to edit those photos with the PSE7 editor, works smoothly.
The Nikon fix kb407110 did not work for me. I also uninstalled PSE5: no change at all.
Has somebody achieved to find a solution for this problem?
Best wishes,
Kai

Kai,
You said you followed the troubleshooting in the Adobe tech note, but it's apparent that you've likely made a mistake somewhere. See my troubleshooting steps in my reply at Elements Village:
http://www.elementsvillage.com/forums/showpost.php?p=454210&postcount=15

PSE Organizer tags to file metadata?

PSE Organizer tags are not automatically included in the picture files' metadata.
I have observed that tags are transferred to file metadata if you do the following:
1. Tag the native picture file using the organizer
2. Create and save an edited copy of our native file, using the editor
Result: Organizer tags are included in the file metadata, for both the edited copy AND the native file.
Is there any way to tell PSE to automatically include tags in the file metadata, or second best; is there a way to do this manually "en gross" (i.e. for a large selection of files in one operation)?
Finn

File>Write tag and metadata information to photos write the tag, GPS and other info to the photo file.
~V

[BUG ?] PSE Organizer - Sort by file size

Hello,
When trying to sort by file size with PSE Organizer, it only takes into account the recently imported pictures.
I have recently migrated my catalog from PhotoShop Album V1.0 to PSE Organizer without problem (or at least I solve all of them, thanks to John !).
Now, when I ask all pictures with a file size higher than 2000 kb, I only have the files that I recently imported... Is there any solution to also include all pictures (I paid attention not to select the recent album, I show all pictures - but maybe I do something else wrong ??)
Thanks,
Kamayana

johnrellis wrote:
Interesting. When you do Edit > Update Thumbnail, PSE rereads all the metadata from the file except for keyword tags. So your hypothesis that the file size information was not converted from the PSA catalog sounds reasonable. Just one of many bugs in the conversion process.
Yes, EDIT > UPDATE THUMBNAIL, that's what I done (sorry, I am french and I downloaded the french version, so my translation are sometimes erroneous).
Anyway, it solve my problem, thanks to you for helping me, you finally helped me to be curious and to search the problem.
Kamayana

How do i import file formate imaged from panasonic DMC ZS40 into PSE 9.0

how do i import file format image from Panasonic DMC ZS40 into PSE 9.0. Any help appreciated.
Thanks

See:
* http://kb.mozillazine.org/Import_bookmarks

Deleting files in PSE-organizer

Hi,
I have 2 questions concerning the handling of picture files in the PSE-organizer.
When I want to reduce a large amount of pictures (800 and more) i.e. after holidays I use the organizer to get a quick overview of the shots which are immediately to be deleted.
Unfortunately, every single deleting process has to be confirmed when the intention is to remove the pictures both from the catalogue and the harddrive. You have to activate a checkbox every time! I would like to know whether it is possible to suppress that message and checkbox action.
The second problem I have is that sometimes (not every time!) when I delete a couple of pictures within the organizer this action will move the view to the very first picture again so you have to scroll down to the last chosen pictures again. For example I have 700 pictures, reach pictures 511, 512 and 516 which I delete then the organizer would do that but jump back to picture 1. So I have to scroll down to picture 517 again to resume my selections of good and bad material. That can be very soul-killing with 700 pictures and maybe 200 to delete ;-)
Does anybody know how to help me with these 2 problems.
Thank you in advance for your support.
Kind regards from Germany,
Marco

It's not possible to set a default for the checkbox (poor design by Adobe). However, here's a workaround:
Mark the files you want to delete as hidden using Edit > Visibility > Mark As Hidden (ALT+F2). When you're one, review all the hidden files by doing View > Show Only Hidden Files. Then do Edit > Select All and delete all of them at once.
If you're already using hidden files for other purposes, you could use a tag instead, though it wouldn't be quite as fast to drag a tag to photo as typing ALT+F2 (but still faster than waiting for the interminably slow Delete dialog box).

JPEG file format option missing in PSE 9

The JPEG file format option in the "Save as" dialog is no longer listed in PhotoShop Elements 9. I've completely uninstalled and re-installed the software, but the JPEG file format option is not there.

Most likely you have a 16 bit file and JPEG is an 8 bit format. Go to image>mode>8 bits/channel and jpeg should reappear as an option.

Import Failed, file format not recognized

I have a new Samsung Galaxy S2 phone with 8 mp camera and HD video. Photoshop Elements 10 doesn't recognize either the photos or videos from the phone. The file formats are JPG and MP4. Elements 7 & 9 recognized these files just fine and any files that were already in the catalog from the phone display fine in Elements 10 after upgrading. I just can't import anything new. The files downloaded to my computer through the Elements Photo Downloader and will play and display just fine outside of Elements so I know the files aren't corrupt or damaged. I really need to get this fixed as this device will be my primary mode of taking pictures and video.

Try this as a test:
Open one of the failing JPG files in another application, such as XnView. Use that application to save the file. Then see if Organizer will import that photo.
Sometimes the JPG metadata is corrupted just enough for PSE to choke on it, although other apps can open the file just fine. Saving the file from another app will re-write the metadata correctly.
Ken

Catalog DVDs in PSE organizer

Hi folks,
I am looking for some search terms to find recommendations on how to use PSE organizer to catalog several hundred hours of personal video footage on DVD.
I've tried searching Adobe's forums, Google and Elements Village to find some clues if Organizer can be used for this. Ideally, I would grab a screenshot from DVD, store it as a thumbnail reference the DVD name, and then be able to use tags (ideally, I'd like to use my existing still catalog tags) to lookup scenes for editing in Premiere Elements.
Again, not looking immediately for the answers in this thread - just how to find the answers if they already exist.
thanks
-j

Ideally, I would grab a screenshot from DVD, store it as a thumbnail
reference the DVD name, and then be able to use tags (ideally, I'd like
to use my existing still catalog tags) to lookup scenes for editing in
Premiere Elements.
James,
Interesting question.
You say you have searched on the Adobe forums and Elements Village, so my first suggestion is that you add another source. Muvipix.com is a site formed by several book authors and Adobe Premiere Elements forum participants. It has free forums and also subscription offerings. It has been a great source of Premiere Elements information for me.
My expereince -
I have taken a screen shot of a .mpg file (containing SD MPEG-2 video from a HD camcorder) and used it to represent the video by saving the screen shot using a file name that correlates to the video file. I also used the Organizer command to modify the "date taken" field it uses for Organizer sequencing to be the same date in this screen shot jpeg as the video file from which it was taken. (Ideally this is the date the video was originally recorded.) The screen shot can be captured from the video using either Premiere Elements or the Photoshop Elements Editor.
My interpretation of your post is that
your DVD disc is of a video DVD format: it probably has a folder structure with DVD menus and several files which contain the video.You want to effectively tag the contents of this DVD disc with Adobe Elements Organizer tags.
Because you are working with a DVD video disc (rather than my single video file on the hard drive), there are additional questions for your scenario.
So I suggest that you also post your question over on the muvipix forums at
http://muvipix.com/phpBB3/index.php
Those forums are divided into sections and despite that fact that this started here as a Photoshop Ekements question, I recommend that you post in the muvipix Premiere Elements corner. If you don't currently have Prem Elem installed, I suggest choosing the most recent version subforum - PE version 8: otherwise choose the version that you have installed.
Barb O

Why can't I download photos from my harddrive in PSE Organizer 8?

I've tried 3 different times to download my photos in PSE Organizer 8 from my harddrive. Each time I tried a smaller group. I just upgraded from Elements 4 and I was impressed with some of the features with the organizer and decided to try and use it. I have all my photos organized in folders and sub folders. According to the help information, I should be able to just tell it to download all my photos, including sub folders and once downloaded, I can click on folders view (can't quite remember exactly what it's called) and I will find all my photos organized the same way. I have Windows XP. I do have a large amount of photos. The first try included all of them for a total of 11,644, but part of these are .pub and .doc files which cannot be download. The last try was 8,843 photos which, again included files that cannot be downloaded. I was really hoping to download my pictures in an already organized way. Is this possible? Is it that it just can't handle downloading that many at a time, or could it be some other problem?

What do you see that tells you the photos didn't import into the Organizer? Do you get an error message? Does the Organizer appear to be empty when you finish importing?
More importantly, this is not the correct process when moving from PSE4 to PSE8. You need to convert your PSE4 catalog. To do this, open PSE8 and select File->Catalog->Convert.
My advice is to forget importing existing photos into the Organizer, and convert the catalog as described above.

Default file format

Hi there. My forum search did not have an answer to this question...
I just upgraded to PSE4 from 3. I have been reading to save my edits as PSD or TIF rather than Jpeg. My camera uses jpeg not RAW. Is there a way to make PSE do this when auto correcting for red eye on import? I used this feature for the first time today with good results - to my amateur eye.
Jay
PS: Are people finding this auto red eye accurate?

Jay.....
I don't believe you can change the file format on import and really there is no need at that stage. Its not going to provide any better quality. Consider using PSDs after you've done some serious editing and perhaps have layers.
As for Auto Correct of Red-eye on import. I always advise people to turn this OFF for two reasons.....
1. Its not always accurate
2. It takes longer to download files.
My 2p worth :-)
Colin

File format for download

Hi,
I have to download the file in the .csv format. What is the function module for it.
Regards

see this sample code
REPORT YSG_MATSTK_REPT LINE-SIZE 220
LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MVKE, "SALES DATA FOR MATERIAL
MAKT, "MATERIAL DESCRIPTION
EKKO, "PURCHASING DOCUMENT HEADER
EKPO, "PURCHASING DOCUMENT ITEM
VBAK, "SALES DOCUMENT HEADER DATA
VBAP. "SALES DOCUMENT ITEM DATA
TYPE-POOLS : SLIS.
DATA: VT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
V_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
V_LAYOUT TYPE SLIS_LAYOUT_ALV,
BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, "MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH, "INDUSTRY SECTOR
MEINS LIKE MARA-MEINS, "BASE UNIT OF MEASURE
MATKL LIKE MARA-MATKL, "MATERIAL GROUP
END OF I_MARA,
BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR, "MATERIAL NUMBER
WERKS LIKE MARC-WERKS, "PLANT
LVORM LIKE MARC-LVORM, "FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
DISPO LIKE MARC-DISPO, "MRP CONTROLLER
END OF I_MARC,
BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR, "MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX, "MATERIAL DESCRIPTION
SPRAS LIKE MAKT-SPRAS, "LANGUAGE KEY
END OF I_MAKT,
BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR, "MATERIAL NUMBER
VKORG LIKE MVKE-VKORG, "SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG, "DISTRIBUTION CHANNEL
END OF I_MVKE,
BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR, "MATERIAL NUMBER
LGORT LIKE MARD-LGORT, "STORAGE LOCATION
LABST LIKE MARD-LABST, "VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD,
BEGIN OF I_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN, "PURCHASING DOCUMENT NUMBER
EBELP LIKE EKPO-EBELP, "ITEM NUMBER OF PURCHASING DOCUMENT
MATNR LIKE EKPO-MATNR, "MATERIAL NUMBER
END OF I_EKPO,
BEGIN OF I_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF I_VBAP,
BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
SPRAS LIKE MAKT-SPRAS,
MAKTX LIKE MAKT-MAKTX,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
END OF I_OUT,
BEGIN OF I_HEADING OCCURS 0,
TEXT1(20),
TEXT2(20),
TEXT3(20),
TEXT4(20),
TEXT5(20),
TEXT6(20),
TEXT7(20),
TEXT8(20),
TEXT9(20),
TEXT10(20),
TEXT11(40),
TEXT12(20),
TEXT13(20),
TEXT14(20),
TEXT15(20),
TEXT16(20),
TEXT17(20),
END OF I_HEADING.
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR. "OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS. "OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO,
S_EBELN FOR EKPO-EBELN .
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS : RB1 RADIOBUTTON GROUP G1,
RB2 RADIOBUTTON GROUP G1,
RB3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
*& I N I T I A L I Z A T I O N *
*INITIALIZATION.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
PERFORM PURCHASEDATA_VALIDATION.
PERFORM SALESDATA_VALIDATION.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS MATKL FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS,
MARA-MATKL TO I_OUT-MATKL.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX SPRAS FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX,
MAKT-SPRAS TO I_OUT-SPRAS.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_EKPO WHERE MATNR = I_MARC-MATNR.
MOVE: I_EKPO-EBELN TO I_OUT-EBELN,
I_EKPO-EBELP TO I_OUT-EBELP.
ENDLOOP.
LOOP AT I_VBAP WHERE MATNR = I_MARC-MATNR.
MOVE: I_VBAP-VBELN TO I_OUT-VBELN,
I_VBAP-POSNR TO I_OUT-POSNR.
ENDLOOP.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
ENDLOOP.
APPEND I_OUT.
CLEAR I_OUT.
ENDLOOP.
PERFORM OPTIONS.
FORM OPTIONS *
FORM OPTIONS.
IF RB2 = 'X'.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ELSE.
IF RB1 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
ELSE.
IF RB3 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "OPTIONS
FORM HEADINGS *
FORM HEADINGS.
I_HEADING-TEXT1 = 'MATNR'.
I_HEADING-TEXT2 = 'WERKS'.
I_HEADING-TEXT3 = 'LVORM'.
I_HEADING-TEXT4 = 'DISPO'.
I_HEADING-TEXT5 = 'MBRSH'.
I_HEADING-TEXT6 = 'MEINS'.
I_HEADING-TEXT7 = 'MATKL'.
I_HEADING-TEXT8 = 'VKORG'.
I_HEADING-TEXT9 = 'VTWEG'.
I_HEADING-TEXT10 = 'SPRAS'.
I_HEADING-TEXT11 = 'MAKTX'.
I_HEADING-TEXT12 = 'LGORT'.
I_HEADING-TEXT13 = 'LABST'.
I_HEADING-TEXT14 = 'EBELN'.
I_HEADING-TEXT15 = 'EBELP'.
I_HEADING-TEXT16 = 'VBELN'.
I_HEADING-TEXT17 = 'POSNR'.
APPEND I_HEADING.
ENDFORM. "HEADINGS
FORM DLOAD *
FORM DLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.csv'
FILETYPE = 'DAT'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_HEADING
EXCEPTIONS
FILE_WRITE_ERROR = 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.csv'
FILETYPE = 'DAT'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_OUT.
ENDFORM. "DLOAD
FORM FIELDCAT *
FORM FIELDCAT.
V_FIELDCAT-COL_POS = '1'.
V_FIELDCAT-FIELDNAME = 'MATNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'MATNR'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '2'.
V_FIELDCAT-FIELDNAME = 'WERKS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'WERKS'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '3'.
V_FIELDCAT-FIELDNAME = 'LVORM'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LVORM'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '4'.
V_FIELDCAT-FIELDNAME = 'DISPO'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'DISPO'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '5'.
V_FIELDCAT-FIELDNAME = 'MBRSH'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MBRSH'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '6'.
V_FIELDCAT-FIELDNAME = 'MEINS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MEINS'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '7'.
V_FIELDCAT-FIELDNAME = 'MATKL'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MATKL'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '8'.
V_FIELDCAT-FIELDNAME = 'VKORG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VKORG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '9'.
V_FIELDCAT-FIELDNAME = 'VTWEG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VTWEG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '10'.
V_FIELDCAT-FIELDNAME = 'SPRAS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'SPRAS'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '11'.
V_FIELDCAT-FIELDNAME = 'MAKTX'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MAKTX'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '12'.
V_FIELDCAT-FIELDNAME = 'LGORT'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LGORT'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-SELTEXT_L = 'STRG LOCT'.
V_FIELDCAT-OUTPUTLEN = 10.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '13'.
V_FIELDCAT-FIELDNAME = 'LABST'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-SELTEXT_M = 'STOCK'.
V_FIELDCAT-OUTPUTLEN = 15.
V_FIELDCAT-REF_FIELDNAME = 'LABST'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-DO_SUM = 'X'.
V_LAYOUT-TOTALS_TEXT = 'TOTAL STOCK:'.
V_FIELDCAT-HOTSPOT = 'X'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '14'.
V_FIELDCAT-FIELDNAME = 'EBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'EBELN'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '15'.
V_FIELDCAT-FIELDNAME = 'EBELP'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'EBELP'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '16'.
V_FIELDCAT-FIELDNAME = 'VBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'VBELN'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '17'.
V_FIELDCAT-FIELDNAME = 'POSNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'POSNR'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
ENDFORM. "FIELDCAT
FORM OUTPUT *
FORM OUTPUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = 'CLICK ON MATERIAL/PURDOC/SALESDOC FOR DETAILS'
I_CALLBACK_USER_COMMAND = 'DISPLAYDETAILS'
IS_LAYOUT = V_LAYOUT
IT_FIELDCAT = VT_FIELDCAT1
TABLES
T_OUTTAB = I_OUT.
IF SY-SUBRC 0.
ENDIF.
ENDFORM. "OUTPUT
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'REPORT FOR : '.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'MATERIAL DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'PURCHASE ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'SALES ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'GEAR'
IT_LIST_COMMENTARY = T_HEADER.
ENDFORM. "TOP-OF-PAGE
*& FORM DISPLAYDETAILS *
FORM DISPLAYDETAILS USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
IF SELFIELD-FIELDNAME = 'EBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM PORECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'MATNR'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM MMRECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'VBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM SALESRECDNG.
CLEAR BDCDATA[].
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "DISPLAYDETAILS
FORM PORECDNG *
FORM PORECDNG.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-BSTNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RM06E-BSTNR'
I_OUT-EBELN.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-BSTPO(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=AH'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
I_OUT-EBELP.
PERFORM BDC_FIELD USING 'RM06E-TCSELFLAG(01)'
'X'.
PERFORM BDC_TRANSACTION USING 'ME23'.
ENDFORM. "PORECDNG
FORM MMRECDNG *
FORM MMRECDNG.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0060'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RMMG1-MATNR'
I_OUT-MATNR.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0070'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'MSICHTAUSW-KZSEL(01)'
'X'.
PERFORM BDC_TRANSACTION USING 'MM03'.
ENDFORM. "MMRECDNG
FORM SALESRECDNG *
FORM SALESRECDNG.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'VBAK-VBELN'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'VBAK-VBELN'
I_OUT-VBELN.
PERFORM BDC_TRANSACTION USING 'VA03'.
ENDFORM. "SALESRECDNG
FORM BDC_TRANSACTION *
FORM BDC_TRANSACTION USING TCODE.
CALL TRANSACTION TCODE USING BDCDATA MODE 'E'.
ENDFORM. "BDC_TRANSACTION
FORM BDC_DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
INSERT FIELD *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM. "BDC_FIELD
*& FORM PURCHASEDATA_VALIDATION *
FORM PURCHASEDATA_VALIDATION.
SELECT EBELN EBELP MATNR
FROM EKPO
INTO TABLE I_EKPO
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND EBELN IN S_EBELN
AND WERKS EQ P_WERKS.
IF I_EKPO[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM TABLE EKPO'.
EXIT.
ENDIF.
DATA: T_EKPO LIKE I_EKPO OCCURS 0 WITH HEADER LINE.
T_EKPO] = I_EKPO[.
REFRESH I_EKPO.
FREE I_EKPO.
LOOP AT T_EKPO.
SELECT SINGLE EBELN FROM EKKO INTO EKPO-EBELN
WHERE EBELN = T_EKPO-EBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_EKPO TO I_EKPO.
APPEND I_EKPO.
CLEAR I_EKPO.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_EKPO.
ENDFORM. "PURCHASEDATA_VALIDATION
*& FORM SALESDATA_VALIDATION *
FORM SALESDATA_VALIDATION.
SELECT VBELN POSNR MATNR
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE
I_VBAP FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_VBAP[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM TABLE VBAP'.
EXIT.
ENDIF.
DATA: T_VBAP LIKE I_VBAP OCCURS 0 WITH HEADER LINE.
T_VBAP] = I_VBAP[.
REFRESH I_VBAP.
FREE I_VBAP.
LOOP AT T_VBAP.
SELECT SINGLE VBELN FROM VBAK INTO VBAK-VBELN
WHERE VBELN = T_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_VBAP TO I_VBAP.
APPEND I_VBAP.
CLEAR I_VBAP.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_VBAP.
ENDFORM. "SALESDATA_VALIDATION
https://forums.sdn.sap.com/click.jspa?searchID=4274284&messageID=1658915
Re: How to download a report into CSV file format?.
*reward for useful answers*

How do PSE Organizer import photo tags? not found

After importing all my picture to one catalogue in the organizer of PSE 9 for Mac, I recognize that my photo tags which were set in Lightroom and save in the photos are not available in the oragnizer.
Even I am not able to find those tags or can use my tags for filtering.
Is there a switch inside PSE to activate my tags or what ever.
Thanks for your help!

Did Lightroom write the tags to the photo files? Lightroom doesn't do that automatically, you have to turn on an option in Lightroom.
Which brings up a 2nd point. Why do you want to use two different "organizers", one in PSE and one in Lightroom. This seems to me to be pointless ... extra work, no benefit.
If I had to pick one "organizer", I would simply use the Lightroom Library Module. It doesn't make sense to me to pick the PSE Organizer in this case.

PSE Organizer quitting

My PSE organizer keeps quitting unexpectedly, I am also loosing images during editing process. I am using PSE 13 on a Mac with most recent operating system. I have been through all trouble shooting sugestions I have been given except resetting preferences. It was suggested that I use finder to browse for and rename a preference file ~/Library/Applications Support/Elements Organizer /<version> / Organizer. Finder is not recognizing this file name and all im getting is " file not found" Getting very frustrated with this issue and Adobe posture with support for PSE. Would really appreciate more advise.

Hi,
Please give the instructions mentioned in the article: http://helpx.adobe.com/elements-organizer/kb/organizer-crashes-launch-does-not-start.html
a try.
Thanks,
Anwesha

PSE 8 Organizer file format

Similar Messages

Maybe you are looking for