PSE 8, Raw 6.1, Lens Correction

Hello,
I have just installed the Raw-Plug-In 6.1 for my Photoshop Elements 8 on Windows 7 64bit.
I can no where find the lens correction tab. Does anybody know what I have to do to get this tab?
The startet plug-in shows vesion 6.1 so the installation seems to be correct.
I was really looking forward for the lens correction part, because this would be a really useful feature.
Thanks in advance for your help.
Sincerely Borg

According to the Camera Raw thread I have linked, that feature isn't available in PSE.
Snip taken from the Camera Raw forum thread:  http://forums.adobe.com/thread/658224

Similar Messages

  • Camera Raw 6.5 - Lens Corrections

    Hello: I know a 50mm lens is more commonly used for portrait shots but I like that I can be "POSITIONED CLOSER" to the subject when using a 35mm lens. Camera Raw 6.5 >Lens Corrections >Profile Make and Model and Profile, recognizes both of my lenses. My question is . . . can Camera Raw 6.5 "PROFESSIONALLY" eliminate the "distortion advantage" a 50mm lens has over a 35mm lens or am I still better off using the 50mm lens ? Thank-you, MLR

    Rick McCleary wrote:
    A lens does not have perspective.
    Perspective is a function of the distance from viewer to subject.
    Perspective is completely independent of lens, camera, or the clothes you're wearing; it's determined only by the point in space from which a subject is viewed.
    Perhaps technically correct but not practically relevent...
    While it's true that the "perspective" is dictated on the distance from camera to subject, in practical terms if you fill the frame with the exact same subject size, the viewpoint (and hence the "perspective") will be different...
    As a result a full frame face shot with a 35MM vs a 50MM lens will indeed have a different perspective. As indicated by the OP, a face will elongate with a full frame shot of a face taken with a 35MM lens vs a longer lens. This is the practical impact of focal length. The longer the lens the more confessed the perspective.
    And this has zero to do with "lens distortions" which are a technical defect  of the optical properties of a lens such as barrel distortion, CS and vignetting.
    The lens dictates the point of view of the image…a wide angle lens will have a forced perspective while a longer lens congresses the perspective. ACR can correct for barrel distortion, CS and vignetting but nothing relating to perspective.

  • Scale difference between Camera Raw and Lens Correction Filter in CS6

    I have the latest Camera Raw plugin (8.6.0.254). When I open an NEF file from a D800, the resulting image is 4912x7360 pixels, whether I apply distortion correction or not.
    If I load the NEF file, do not apply distortion correction in Camera Raw, but then apply it via the Lens Correction Filter, the image must be rescaled to approximately 4840x7252 (some 98.53%) so that it matches the results of the Camera Raw plugin (minus the missing pixels around all four sides, of course).
    Anyone else notice this (particularly in newer versions of Photoshop)? Is there a way to prevent this cropping? The amount of distortion on the lens (35mm) is minimal and, regardless of that, I would have expected Camera Raw and the Lens Correction filter to output identical images after distortion correction, since the lens profile is the same.

    To see if that can be replicated, we'd need to now the exact version of CS6 you're running (e.g. on Mac you should be on Photoshop CS6 13.0.6) and the exact version of your OS.

  • LR3 can't read lens correction in PSD files.

    I've done lens correction in my raw file.
    After opening in in Photoshop CS4, I've made some adjustments in tone and sharpen, and save as
    a PSD file, with the same name as raw file.
    Comparing the two files, Raw and PSD, the look quite different about the correction lens results.
    In PS they looks like the same one, but in LR3 they are not.
    It look like the raw file without lens correction.
    It's a big issue if I want to export that psd file or even generate other files from it.
    Thanks in advance for any help.

    You need at least ACR 6.1 + Photoshop CS5 to interpret lens corrections in Photoshop. CS4 cannot do it.
    You only option is to set Photoshop as a secondary editor (check Prefs in Lightroom) and let Lightroom render the image before sending it to PS.

  • Enable Profile (ACR) and Filter Lens Corrections does not recognize Lens

    I did several searches and couldn't find this so it may be a new question. I'm running into it in both CS5 (Camera Raw and Filter > Lens Corrections) and Lightroom 3.3 (Develop- Enable Profile). I'm asking here since I figure if I can fix CS5, I'll know what to do in Lightroom.
    I have a Canon 1D MK IV. ACR recognizes the camera and processes the raw file. I check updates and everything is current. With Enable Profile checked, some lenses like my 24-105 L are recognized but my 17-35 L seems to be a complete mystery to it. I'm assuming that this is due to a missing profile.
    Am I correct in thinking that the process is, download, install and run the Adobe Profile downloader. If I do not find any hits for my lens, I am then in the spot of having to use the profile creator to build one (or go without).?
    Are there any other sources for camera / lens profiles that can be imported into the enable profile process?
    Once you have a new profile where do you store it?   under Users> Owner > AppData > Roaming > Adobe > Lens Correction ?
    Thanks
    Rick

    Just to make sure:  Have specifically checked to ensure you have the latest Camera Raw update (6.3)?  I know you said you checked updates, but it never hurts to do a Help - About Plug-in... in Photoshop and double check.
    http://www.adobe.com/products/photoshop/cameraraw.html
    -Noel

  • Lens corrections in PSE raw

    I cannot determine whether lens corrections work in ACR 6.4 using Elements 9. I know the lens correction tab is not available - but does that mean no lens corrections are applied at all - or does it simply mean I cannot manipulate the correction beyond the default provided in ACR?

    ACR will use whatever the ACR default is for the specific camera the raw file is from.  I say this because with ACR 7, at least, you can enable Auto-CA (a manual lens correction) as the default for a particular camera when using ACR with PSE10, by editing the ACR camera-defaults file with a text editor.
    Here is what I did on Windows 7 to enable Auto-CA for my brother who does not use LR nor PS, only PSE:
    1) Open a new RAW image for the camera you are wanting to affect the settings of in PSE/ACR that has never had any edits done.
    2) Go to the Camera Calibration tab in ACR (a black camera icon) and change the Process Version to 2012—this will update the camera-defaults file to have PV2012 values which include the Auto-CA.  You can skip this step if you are using an older version of PSE.
    3) Click the 3-dots-three-lines icon at the right of where it says Camera Calibration, and choose Save New Camera Raw Defaults from the bottom of the menu that pops up.  This step will create a or update the camera-specific ACR-defaults file for your computer user.
    4) Exit ACR with Cancel, and Exit PSE.
    5) Using Windows Explorer, browse to the following folder under your user folder:  c:\Users\yourusername\AppData\Roaming\Adobe\CameraRaw\Defaults\ 
    The AppData folder is hidden so you may need to type this part into Explorer’s address bar.
    6) In the Defaults sub-folder there should be one or more files named:  Default_somehexdigits.XMP.
    7) Open each of these XMP files and find the one that matches the camera the raw file was from.  The value of the crs:KeyString attribute is the camera name.
    8) Further down in this XMP file, look for several lens-correction-specific attributes and change them to be the following:
           crs:LensProfileEnable=”1”
           crs:AutoLateralCA=”1”
           crs:LensProfileSetup=”LensDefaults”
    The other parameters for Vignetting and Perspective are for manual adjustments and you don’t want to set these other than “0” for your defaults although you can set them for an individual image by editing its XMP file.
    9) Save the XMP file.
    10) Start up PSE and open a new RAW file and see that the lens-distortion and Lateral-CA has been corrected as much as the auto-correction can do.

  • Lens Correction not happening in RAW with PSE 10

    My Camera is in the list a FinePix HS10, I have done all the updates that are available.
    I tried doing searches but nothing came up that I could find a solution to this.
    When I shoot a raw+jpg of an item with straight lines (edges of a painting) the JPG version has the lens distortion corrected, however the raw does not and shows curves where there should be straight lines.  When I go to Camera Calibration screen it shows Process 2010 (current) and Camera profile shows Adobe Standard.  There are no additional Camera Profiles listed.
    I am at a loss as to what to do to resolve this and have the RAW compensate for the lens distortion and end up like the JPG file.  Is my camera supposed to show up in Camera Profiles?  This would be horrible if not being able to be corrected so I must be doing something wrong or missed a step.

    Elements using the Camera Raw plug-in doesn’t allow for lens-corrections.  Since you’ve posted your question in the Elements forum, is that what you’re using?  The much more expensive regular Photoshop hosting the camera-raw plug-in and the less-expensive Lightroom do allow selecting lens profile corrections.
    The Camera Calibration area you refer to only deals with raw camera profiles for color rendition, not lens profiles that would correct geometric distortion.
    A more fundamental question is whether there are actually lens-distortion-correction profiles for a FinePix HS10.  Usually Adobe supplies lens profiles for most Canon and Nikon DSLRs although there are a few others for other brands and types of camera, with a Fuji point-and-shoot having less chance of having a lens-profile created by Adobe.
    There is an Adobe Lens Profile Downloader tool for getting third-party lens-profiles and checking it just now, it appears there is a raw profile for the FinePix HS10/HS11 built-in lens, but you still need to be using an Adobe product other than Elements to apply such a profile.

  • Lens Corrections unavailable in Adobe Camera Raw 8.3

    hello,
    since i switched to photoshop CC (mac version), i am having constant problems with lens corrections in ACR 8.3. i am a professional photographer and i use various canon pro lenses that all exist as unique lens profiles already in photoshop and ACR's lens profile archives. when i open canon .CR2 files in adobe ACR 8.3, i encounter the message "unable to load lens profile" at the bottom right of dialog box and even though the correct lenses are identified, ACR cannot apply corrections (please see the attached visual). furthermore, this behavior happens to be sort of erratic, since it may sometimes decide to apply corrections without displaying the "unable to load lens profile" error message.
    when i open the files into photoshop CC without being able to apply corrections, i try the "lens correction" menu within photoshop and it works. it is very cumbersome not to be able to do this at the ACR stage.
    the ACR that came with photoshop CS 6 never had such problems and it corrected all the lenses that i had.
    can you please help me to fix this issue ASAP, since this error makes me lose a lot of time in my workflow.
    i also have photoshop CS6 installed in the same disk, could this have any effect?
    best regards,
    murat germen

    Presumably you're shooting raw for everything, right, otherwise the issue can be that most raw-capable-camera's JPGs don't have lens profiles whereas raw files do, so profiles are found for raw images but not JPGs.  The reverse is sometimes true, too, where a camera used to only have JPG output but now produces raw files.  I believe the DJI Phantom Vision FC200 quadcopter camera is an example of such.  The screenshot doesn't have enough of the ACR interface to see the name of the file.
    Are the profiles that aren't found consistently the same lens or are they from various lenses that also have photos that work in ACR 8.3 at other times?  And do the same photos that fail to have lens profiles load in ACR 8.3 at one point then work if you open them again, later?  In other words does the intermittency seem to be tied to either the specific photos or the specific lenses or not?  Specific photos could mean there is something corrupted in the photo.  Specific lenses could mean that the lens profiles are missing, somehow, or inaccessible due to permission problems.
    Is CS6 updated to the same ACR 8.3 version or is it older?  If it is older then install the ACR 8.3 update for CS6.  This will re-install the lens and camera profiles, again.
    If CS6 is already updated to ACR 8.3, too, then install the DNG Converter 8.3, which also will install the profiles, again.
    The DNG Converter can be found, here:
    http://www.adobe.com/downloads/updates
    If you can't figure it out, then uninstall PS-CC, log out of the CC Desktop app, log back in--so it sees that CC is missing, then re-download and install CC.  This should reset ACR back to 8.0 or 8.1 after which you can install the ACR 8.3 update, again.

  • How to Save Camera Calibration and Lens Correction in Camera raw 6.1

    I downloaded and installed the Camera Raw 6.1 release candidate.  I open an image and set the camera calibration and the lens correction to auto for Nikon.  I save these settings as new Camera raw defaults, but when I open other images, the changes were not made.  How can I save these items as defaults?
    Swila

    Swila, were your "other images" previously edited in Camera Raw? I.e., do they already have saved image settings? The defaults that you save via the flyout menu will only apply to new images, or if you reset an existing image to the defaults. (e.g., choose "Camera Raw Defaults" from the flyout menu).
    Eric

  • Adobe Camera Raw - lens correction profiles not found

    I use Photoshop CC as part of the photography program of Creative Cloud. My platform is a Mac Book Pro (2013) with the latest Mac OS-X operating system. I have also installed Bridge CC and Lightroom 5.
    Since about three weeks (maybe after an update but I'm not sure on that) Adobe Camera Raw's lens correction feature fails permanently. With older pictures (taken long before the error occured for the first time) as well as with new photos and with dng files as well as with cr2 files the ACR dialog always shows the error message (lens correction profile can't be found - since I have the German version of Photoshop this is how I would translate the error message). I didn't install or uninstall any programs, plugins etc. around the time of the first occurance of the error.
    I already uninstalled Photoshop CC completely (using the uninstall function in the programs folder) and reinstalled it via Creative Cloud but it still shows the same error.
    What can I do?

    Hello, you can make sure the latest version is installed by going to help-updates.
    Also, make sure that you are running the latest version of the creative cloud application, as it fixes a permission problem that might cause the issue you are facing. Just go to the creative cloud application on your menu bar, and restart it.

  • Vignette Correction + Lens Correction in Camera Raw / Lightroom

    Ok i merge 2 requests for both camera raw and lighroom...
    -> Vignette Specific Correction: Using preset for Lenses like Canon DPP Does for Peripherical Illuminance Correction, the vignette tool in lighroom is good but can't adapt to a variable vignette profile of each lens...
    + Ability to user to add them using a png 24 bit or similiar for Lenses not present on the DB (think using old lens, with adaptors, old zeiss without automatic controls that obviously will be not profiled by Canon, Nikon, Sony.. for their bodies)
    -> Lens Correction based on Preset... + exif reading like in photoshop cs5 + manual adjustments
    thank you

    So you use Photomatix to create a 32-bit HDR file and then tone that 32-bit file in ACR?  Are the Photomatix 32-bit files that much different than the PS-CC 32-bit files?  The Photomatix 32-to-16-bit conversion is quite a bit different and perhaps preferable, but I didn’t realize the 32-bit result file is also that much different.  It’s been a while since I’ve tried 32-bit HDRs and even longer since I’ve tried them in Photomatix so things may have changed or I’ve forgotten.
    If you are using Photomatix, then you are not using an Adobe raw conversion at all, so Adobe settings and raw lens profiles are not seen and used at the initial raw-conversion stage in Photomatix.
    The choices would seem to be that you can use Adobe products to create 16-bit TIFs as an input to Photomatix, or hack an Adobe raw lens profile to be used with non-raw files in ACR, or do your lens profile corrections after you’ve saved your 32-bit HDR image back as a 16-bit one and use the lens corrections area in Photoshop if that is still possible, nowadays.

  • Adobe Camera Raw & lens correction for Nikon 105mm f/2.8 AF Micro

    Adobe Camera Raw does not have a lens profile for the Nikon 105mm f/2.8 AF D Micro lens (the discontinued 105 mm - there is a profile for the new  Nikon AF-S VR 105mm f/2.8 G IE-F).   However, when lens corrections are enabled, ACR (and thus Lightroom too) selects the Sigma Macro 105mm f2.8 ex dg, Nikon Corporation - presumably the Nikon Corporation means this Sigma lens with a Nikon mount.  This seems like a minor bug in ACR.
    Is there a place to request Adobe create a profile for the Nikon 105mm f/2.8 AF D.   There are a lot of these older lenses out there and it is a great lens.

    There are indeed a lot of older (and still great) lenses out there, but unfortunately we can't build profiles for them all.  This is one reason (a big reason) why we've provided the free Adobe Lens Profile Creator (ALPC) tool, so users can built their own (and share them, too).  You can also check the free Adobe Lens Profile Downloader (ALPD) tool and see if other users have already built a profile for this lens.

  • Camera Raw 7.1's lens correction tab is wrong

    I have Photoshop CS6 with Camera Raw 7.1 on Windows 7. However it seems that my CR is different from what I usually see. For example in the ''Lens Correction'' tab you are supposed to have only 2 tabs: Profile and Manual. However I have 3: the last 2 + Color. Also I don't have the ''remove chromatic aberration'' checkbox.
    I am at a total loss...

    Ryenke, what you are calling "full functionality" was replaced by an automatic sheme that's enabled by a single checkbox.
    When it works, it's very, VERY good.
    When it fails to detect the CA automatically - which has shown to occur with certain egregiously fringed images - then you no longer have a manual backup.
    There have been requests to return the functionality, and so far those requests have been either ignored or it has been suggested to try to work around the problem other ways (e.g., by using the newer color fringing controls, which don't directly address the issue).
    See also:
    http://forums.adobe.com/message/4397207#4397207
    -Noel

  • Has RX-100 Lens correction disappeared again? post RAW Camera Update 4.09

    On a fairly new imac running 10.8.5 and iphoto 11 (9.4.3) A further RAW camera Update seems to have returned an issue with a Sony RX100, and lens correction has dissappeared.

    RAW support 5.03 is now available and it reports to correct this issue
    LN

  • Camera Raw Preferences & Lens Corrections

    I downloaded CS5 this a.m. and cannot access the Camera Raw Preferences when in Bridge.  When I click on Preferences it does nothing.
    Also when in Camera Raw and click on the Lens Correction, I don't see the new lens feature that shows up in the various tutorials about this new lens correction feature.  The Lens Correction panel looks like the one in CS4, not what is shown for CS5.
    Any Suggestions?  I'm on a Mac Pro, running CS5 in 64 bit.
    Sue

    Thank you Rick!  Now I can quit pulling my hair out wondering why I don't see it.  It shows up in all the tutorials so you'd think it would be there.  I'm sure they'll hear about this and get the update out soon, but like you said  "How soon is soon?"
    Thanks again,  Sue
    Now if I can only figure out why Camera Raw Preferences won't open.  Maybe that will be fixed with 6.1.

Maybe you are looking for