PSE 9 and CAHeadless Debug Event??

PS: Have tried to HOLD down 'Shift, Control and Shift' whilst launching Orgnizer as suggested in a previous forum and ALL IT WAS LAUNCH CA HEADLESS BEBUG EVENT Again. Msg always states 'CAHeadless has encountered an error:' [..\..\Src\DataManager.cpp-410]. ???

See if that helps (deleting organizer preferences / turnining autoanalyzer off) :
http://forums.adobe.com/message/5021448

Similar Messages

"CAHeadless Debug Event" Error message

I have Adobe Photoshop Elements 9.0 installed on my Windows 7 computer and have recently started getting a message that I believe may be associated with that program. The message reads "CAHeadless Debug Event" "CAHeadless has encountered an error - [..\..\Src\DataManager.cpp-410]"
Does anyone know what may be causing this message and how to cure it. I am able to click the Continue button and everything works as it should but it is a little annoying.
Thanks
Patrick
Message title was edited by: Brett N

I am also having the same CAHeadless Debug error on PSE 9.
Switching catalogs does not help.
Turning off face recognition does not help.
I have looked through the forums and on the internet and it seems that this is a common problem for PSE 7, PSE 8, and now PSE 9.
Does anyone have a solution?

"CAHeadless Debug Event" Error

Greetings,
I am getting the following error popping up in a dialog box about every five minutes:
CAHeadless Debug Event
CAHeadless has encountered an error.
[..\..\Src\Clip\VideoClip.cpp-276]
I have to click "Continue" to make it going away temporarily.
As a workaround, if I click Edit > Preferences > Media-Analysis, and clear the "Analyze Media for Smart Tags Automatically" box, the errors stop. But I was wondering if here was an actual fix for this error, instead of just a work-around which I discovered.
Thanks,
Shane.
Photoshop Elements 11.0
Windows 7 Home Premium SP1 64-bit
Message was edited by: c_Shane

They don't take up much space—but since I installed version 11 there has been a lot of weird and strange behaviour, and I'm just trying to figure out what's causing it.
I deleted psa.prf, restarted PSE, and re-selected my preferences. Unfortunately, I'm still getting the error.
I notice that when I click Edit > Preferences > Media-Analysis, and click "Analyze Media for Smart Tags Automatically", a process called "ElementsAutoAnalyzer.exe" starts, and I start getting the error. When I clear "Analyze Media for Smart Tags Automatically", the "ElementsAutoAnalyzer.exe" process ends, and the error messages stop.
I'm guessing the only work-around is to not use this feature.
Shane.

Problem with PSE9 - Receiving message window - CAHeadless Debuger Event.

In my last request for Technical support (Case # : 0181931685), I have 2 problems. One about inability to remove PSE9 and reinstalling was corrected by following instructions from Tech.Support. The second problem is still with me. The message window CAHeadless Debuger Event is poping up with the message ...\...\Src\DataManager.cpp-410. The window is having one button <Continue>. When I press the Continue button, everithing work and look OK until next time the windows pop-ups. The computer is new Dell Studio 8100 running OS Windows 7 Home Premium 64. Originaly I started using PSE9 on old Dell with Windows 7 Home premium 32 without any problem. Any advice how to stop this un-plessant message comming?
Thanks a lot! George.

Hi all,
this case is closed it was catalog issue. I corrected this by creating new catalog and importing pictures from hard drive. All is now correct.
George

CAHeadless Debug Event for Adobe Photoshop Elements 12

I am getting this error periodically (every 5 min or so).
What is interesting is that Adobe Photoshop Elements 12 is not even open and yet the following error appears:
The error window is named "CAHeadless Debug Event"
Inside the window it says;
CAHeadless has encountered an error.
[..\..\Src\VideoFrameFactory.cpp-233]
My machine:
Windows 7 Home Premium Service Pack 1
Manufacturer: iBUYPOWER Computers
Processor: Intel(R) Core (TM) i7 CPU [email protected] GHZ 2.83 GHZ
12.0 Gig Ram
64-bit Operating System
Help?
-Hppysnshn

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues. Here is a link to a page with options near the bottom to help make contact:
http://helpx.adobe.com/contact.html?step=CCSN_downloading-installing-setting-up_licensing- activation_stillNeedHelp

PE Debug event?

System info...
Manufacturer Cyberpower
Processor: Intel(R) Core i7-2600k CPU @ 3.40 GHz 3.40 GHz
Installed memory 8.00 GB
System type: 64-bit
running Windows 7
Video camera info...
Sony Exmor 3cmos
Handycam HDR AX2000
Rec format HD 1080/30p FH
Project Settings for PE8
General
editing mode HD 1080
video
frame size 1920 horiz 1080 vert 16:9
Capture
HDV
Video rendering
unchecked max bit depth
checked optimize stills
The video clips were imported off of an sd card reader and are all labeled .MTS files. I tried using handbrake to convert files, but made them worse. Quality is great with .MTS but needs to render and am now crashing frequently. Also tried on PE9 with own issues of crashing, and less menu options. encoding would crash on PE9 menus. Stopped using motion menu and only use one scene selection menu has helped PE9.
I need PE8 issue resolved though. It has stopped playing parts of music laid down on soundtrack and
PE Debug Event that reads
src\filemanager\filemanagerimpl.cpp-115 showed up giving me a very hard time. What am I doing wrong?
I have updated quicktime and manually updated windows
disabled background thing per previous forums I've been reading.
Also defragged computer, but was only 7% fragmented.
HELP!?
Julie

I'm still surprised to see people trying to edit video from a $3500 camcorder on a $75 program. But who knows? It might work.
First, dont' convert the file. And especially don't convert the video with Handbrake. You're only going to make it worse.
It's not clear from your project settings if you selected an AVCHD 1920x1080 stereo -- but, if you did, you should not see red lines above the clips on your timeline until you add effects to them. Is that the case in your project?
If you have the project set up with these specs and you're still seeing red lines above the clips, it's most likely that you've shot it in a format incompatible with Premiere Elements. If, for instance, you've shot in 1920x1080 in 24p or even 30p, you may have problems. (This camcorder shoots in a variety of frame rates and formats, only a few of which are compatible with Premiere Elements.)
Again, it's not likely that this camcorder was designed to have its video edited on an under $100 editing program. Have you considered going with Premiere CS5?

Can uninstalling and installing CS4 fix the debug event error message?

Hello,
Can uninstalling and installing cs4 solve the debug event error message?

Can uninstalling and installing cs4 solve the debug event error message?
Well, that DOES seem to be the scripted mantra of Adobe TS in some out of the way country. According to most reports, that cures everything from trying to Capture over a USB cable to working with footage from your cellphone camera. In most cases, it has cured very little, though maybe the Debug Event error IS something that will be fixed by this.
Good luck,
Hunt

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

PE 11 new install on WinXP system - Debug event error, can't open program

Hi everyone,
I searched the community for similar errors and followed a couple of troubleshooting steps suggested for older versions of PE, but they didn't work. I just installed Premiere Element 11 on my Windows XP office desktop (also installed PS Elements 11, which works without a problem.) Install went well and I rebooted the system as prompted. Every time I attempt to open Premiere however (I am not attempting to load any video files, I just want to open the program to start a new project), I get the splash screen at first, but after a few seconds of "Loading" and/or "Initializing" a bunch of parameters, the program hangs and following screen pops up:
"Premiere Element Debug Event"
Premiere Element has encountered an error.
[..\..\Src\Core\Preferences.ccp-338]
Continue
When I click on "Continue" the following window pops up:
"Microsoft Visual C++ Runtime Library"
Runtime Error!
Program: ..e\Adobe Premiere Elements 11\Adobe Premiere Elements.exe
The application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
OK
So, here I am support team... Need more information, lol. I will also add that clicking the OK after the second window pops up often doesn't close the Premiere splash window still visible in the background, I have to CTRL-ALT-DEL and kill it manually by ending the process in Task Manager.
I installed the same program - same s/n - on my home computer as well, with no issues (that's a much newer, and much faster, Windows 8.1 system however.) I think you are entitled to install 2 copies though, right? So this wouldn't be related to too many attempts to register the same software?
Thanks for any help.

umbertob
Wea re not Adobe. We are Premiere Elements users who visit here under our own free will (unscheduled) to help other Premiere Elements users with their Premiere Elements workflows.
Please detail the resources of your Windows XP computer. What edition is it...professional, home premium, or other? You realize come April 2014 Microsoft will discontinue support for Windows XP. Apparently you can continue to use it, but Microsoft points to security risks in that state.
a. how much installed RAM, how much available
b. how much free hard drive space
c. is the video card/graphics card used by the computer up to date according to the web site of the manufacturer of the video card/graphics card.
Did you install the program to the computer default location according to the installation process?
Please review and then we can discuss the details.
Thank you.
ATR

Adobe Media Encoder Debug Event (when exporting audio)

I do alot of vj'ing... I have a good pipeline for exporting short film clips, optimized for the vj software I use.
I export photojpg at 75 quality, at 640x480, with no audio.
However, i'm now trying to export some of the same clips, but with the audio intact.
No matter what audio format and bitrate setting I choose, however, media encoder refuses to export the audio.
I've tried it with a number source videos, with various combinations of source video/audio codec combinations, and I continue to get the same error:
Adobe Media Encoder Debug Event
[..\..\Src\Win\WinFile.cpp-754]
When I unclick audio, each clip exports fine, as normal.
What gives?
-Matt Daly

I'll tryed now everything. If I choose update it tells everything is up to date. If tryed to run patch from: "http://download.adobe.com/pub/adobe/mediaencoder/win/7.x/AdobeMediaEncoderTrial_64-7.0.1-m ul-AdobeUpdate.zip", it runs ok but nothing has updated when I start Media Encoder again.

Adobe Premier Pro CS3 Debug event

I have Preimeir Pro CS3 with a Debug Event error
..\..\Src\Audo\monitormixer.cpp-153
what is it, how do i fix it

Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used and your project and output settings

MediaCore Importer Process Debug Event

I have a Xp 64bit computer running CS4. I keep on getting MediaCore Importer Process Debug Event Errors on differnt projects. The error details are sometimes different but usually they say. Src/importer/ImporterInstance.cpp.-641
I have scanned for viruses
I have repaired windows
I have repaired premier
I have deleted and reinstalled premier
I have updated the drivers on my video card
I have looked around here and haven't found much for help. It might be a specific file given me problems but I have not tracked it down yet. It might be a codec problem. I am running out of ideas

My computer was working fine until 2-3 weeks ago. No changes except for maybe a CS4 update. Scanned for viruses nothing but a few cookies.
Supermicro board
dual 2.6 ghz intel quad xeons
8 gigs of Wintec Ram
Nvidia Quadro (dual monitor)
Alesis audio card
Adaptec raid controller
Seagate hard drives (about 2 tb raid 10)
Pannasonic DVCpro Deck (firewire)
Windows XP 64 (just repaired - trying to fix problems)
It is connected to a Cisco Switch for file sharing.
Updated CS4 PP
Most video footage is from gyhd100u but we get footage and video from many sources
I am looking for a post from someone who has had this problem, fixed this problem, or has some insight to what a MediaCore Importer Process Debug Event means.
I have been using Adobe Products for over 10 years and I am very computer savy. Even if you are looking to fix the same problem send me some info and maybe I can narrow it down and fix it for both of us.
Right now I think it might be my video card. When I repaired windows I upgraded the drivers on it now I have even more problems. I am rolling them back right now. If that doesn't work I will rollback premier

What is business add-ins and business transaction events

Dear All,
Would you mind tell me what it sht business add-ins and business transaction events ?
i still not understand about this after i read the training material
Regards
Luke

Hi LukeWong ,
BAdi:
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits, two different views are available:
· In the definition view, an application programmer defines exit points in a source that allow specific industry sectors, partners, and customers to attach additional coding to standard SAP source code, without having to modify the original object.
· In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard solution, if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
Check this blogs 2 find a BADI:
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
Business Transaction Events
Business Transaction Events (Open FI) The Open FI enhancement technique was developed in the Financial Accounting component. Open FI is based upon the following principles: Application developers must define their interface in a function module, an assignment table is read in the accompanying (generated) code, and the customer modules assigned are called dynamically. This technique differentiates between enhancements that are only allowed to have one implementation and enhancements that can call multiple implementations in any sequence desired. Both industry-specific and country-specific enhancements may be defined.
SAP business transaction events are one type of customer enhancements provided by SAP! We can access the business transaction events using FIBF.Next we have to find the process interface for duplicate invoice check!
check this blog for details on SAP business transaction events
Business Transaction Events
http://fuller.mit.edu/user_exits/business_transaction_event.htm
FI Enhancement Technique How-To-Guide on the Usage of Business Transaction Events (BTE)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Creation of Events via Business Transaction Events
http://help.sap.com/saphelp_nw04/helpdata/en/3b/7f3e8be57c11d1951f0000e82dec10/content.htm
In SAP R/3 you must activate the business transaction events (BTEs) for Availability Check Using SAP R/3. To set this indicator in SAP R/3:........
http://help.sap.com/saphelp_crm40/helpdata/en/b6/de3efc6bbcdc4b948d466857a10323/content.htm
cheers!
gyanaraj
****Pls reward points if u find this helpful

Pe 13 debug event keyframe error h-142

When I open my previously saved and working project, I get a Debug Event with a keyframe h-142 message (see below).
The workaround proposed in adobe help under Keyframe.h-142 error | Opening projects does not work. I guess because PE13's .prel files are not in plain text format as PE12 and previously, therefore the workaround with perl will not deliver the required results.
Same issue with ALL backup files of this project...
Any suggestions?

I was able to fix the file with the information from post Re: Elements 10 Error: d:\pre\mediacore\mediafoundation\api\inc\Keyframe/Keyframe.h-142
Here are the steps I performed:
1) rename my corrupt.prel file to corrupt.zip (when opening the file in notepad++, I saw a lot of gibberish and thought the file might be zipped, which it is. I am not sure whether this is only the case in PE13).
2) unzip the corrupt.zip and rename it to corrupt2.prel
3) download perl and run the following commands:
C:\Perl64\bin>perl -p -e "s/([-0-9]+?),([0-9]{12,24})/$1.$2/g" corrupt2.prel >corrupt3.prel
C:\Perl64\bin>perl -p -e "s/([-0-9]+?)\.([0-9]{12,24});([0-9]{15})/$1.$2,$3/g" corrupt3.prel >corrupt4.prel
4) Open the file in notepad++ and
search for ",," and replace it by ".,"
search for "0,5" and replace it by "0.5"
and save the file
There, that did it for me. The fixed file does not have to be zipped again for it to open in PE13.

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event
[c: \ cloudroom \ releases \ 2014.9 \ shared \ adobe \ mediacore \ mediafoundation\API\in
I don't know what to do, any help?

Delete the Effect Presets and Custom Items.prfpset, located in
C:\Users\<username>\Documents\Adobe\Premiere Pro\8.0\Profile-<username>
when succesfull make new project and import old one into new one.
Might need to reset current workspace and pull down the audiotracks first to reveal videotracks.

PSE 9 and CAHeadless Debug Event??

Similar Messages

Maybe you are looking for