PSE 9 deactivation not possible, error #194:10

Hi,
it´s installed at only one machine, only one times. When I want to deacitvate the PSE 9, it stops and feedbacks the error message #194:10 to me.
Has anyone a idea what to do there?
Regards
tetscher

OK, but maybe anyone of you know, what errorcode 194:10 is. Because 4 hours ago shuting down the computer and trying it several times to deactivate got no result, only the errorcode.
And the curious thing: now, nearly 4 hours later, I was able to de-activate it without any errorcode. That mean: problem is solved for me.
So, maybe 194:10 means something like "server unavailable" or so, and in this case it would probably help other users if they know, that waiting some hours maybe solve the problem.
That´s my recommendation so far: wait 4 hours, then try again. If it works, fine. If not, wait again 4 hours and try again. If nothing works call the support phone.
Best regards,
tetscher

Similar Messages

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

Hi Jorg ,
Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
Give it a try if you haven't done it prior.
Open that PDF>File>Save as Other>Reduced size PDF.
If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
Regards
Sukrit Dhingra

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

Navigation Not Possible error

Hi All,
We are getting navigation not possible error while creating Travel Expenses.
Recently our system was upgraded from EHP5 to EHP6.
We have copied standard launchpad and we have assigned that custom launchpad role to the user.
We have debugged the method NAVIGATE_TO_OBJECT in class CL_FITV_NAVIGATION and came to know that in the code launchpad value "ESS" is hardcoded.
Please let us know how to proceed further to get our custom Launchpad Parameter into that method?
Regards,
Ravi

Hi,
Yes this shouldnt be hardcoded, this should be either an application parameter or defined in customizing as it is done in many other standard functionnalities... but for FITV it is not the case...
I think that you only have 3 options here :
- Create an OSS message.
- Modify CL_FITV_NAVIGATION...
- Just edit ESS/MENU directly using transaction LPD_CUST
Regards

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

Posting of retirement/transfer not possible (error in the asset)

Dear All,
I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
Posting of retirement/transfer not possible (error in the asset)
Message No.465
Diagnosis
An inconsistency was found for the asset 10 during the last recalculate values.
Posting was rejected,
Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
Thank you.
Emma

Hi,
I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
Thank you.
Emma

Posting of retirement/transfer not possible (error in the asset) Mes: AA465

Dear Experts,
while doing ABUMN, i am getting the following error
Posting of retirement/transfer not possible (error in the asset)
Message no. AA465
Diagnosis
An inconsistency was found for the asset 01 during the last recalculate values.
System Response
Posting is rejected.
Procedure
Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
Regards,
Venkat

Thanks ravi,
I run the AFAR but nothing is visible in test run.
I am defined the cut off key(5%) and assigned in to the dep key.
we run the depreciation for the last 5 months. some of the assets fully depreciated before lagacy data upload. in AW01N those assets showing the error message. Now that asset(fully depreciated asset) is transfer to another business area. then it showing that:
Posting is rejected.
Procedure
Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
Run the depreciation in AFAR means. in which period i can run.
Thanks
Venkat

Sap license error--error is "login not possible (error in license check)u0094

Hi,
I we are not able to login in our IDES r/3 system, it is showing login not possible (error in license check), only sap* is able to login . I have already applied sap license that will
Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light. I tried to del old one but system says through sap* not possible, only sys admin will do..what I can do now..

Hi,
When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
Select the expired license in menu goto EDIT->Delet license(shift+f2)
kiran kumar.v

System Error- restart not possible - Error Message in MONI

Hi,
Though my flow is running fine. with success flags, there are couple of below error messages.
System Error- restart not possible
Message ID D59F2131E30E45E21D5BADCC8C0F8656 for pipeline CENTRAL version 000 already exists in system
why am I getting these errors..
Regards,
Varun

What was the status of your server (XI/ PI and the receiving application) at the time of processing of these messages? Also check if the payload was sent with all the required information.
Regards,
Abhishek.

Changes in Retroactive account time date not possible error

Hi
This employee is joined on date 20.01.1969 after that this employee prejoin on 09/04/2009 and we are trying to change the join date by using transaction code PA41. i am getting the below error message.
'Change in earliest retroactive accounting date time not possible!.'.
I checked the table (T569R) and i changed the value in Time evaluation fields like 01.01.1900 through table level after that I am not getting error message I am able to create the employee but I want to do the configuration level for that
Please provide me the step by step procedures do to the configuration.
before changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1990 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
after changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1900 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
Please help me to resolve the above issue.

This error comes due to 2 dates set in the system
1> Employee level restriction - PU03
2> Payroll Level restriction - PA03
Since you are not going too retro (4/9/2009) so most likely it would be employee level.
Check his IT0003 and edit the dates using tcode PU03 or PA30 -> Utilities -> Change payroll status.
Also when you are trying to change the infotype, make sure you give the correct date as start date (04/09/2009)
Regards,
SC.

CIF queues - Lock not possible error in application log

hi,
Below is the application error log from SLG1
Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
We are currently checking, if this could be due to some issues with LiveCache processing.
Any input would be helpful.
SLG1 - Application log errror:
Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
Access block: data from system CLAF updated again
Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
Object is locked at present
Thanks,
RajkS

Hi Raj,
Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
locking issue.
also check the workprocesses details during those time. whether you have enough space to process the reqd the
t-data.
Regards
DPS

AA449 (Auxiliary account assignment to asset not possible) error

Dear colleagues,
While posting asset sale through FB01, it is giving the following error: Auxiliary account assignment to asset not possible, remove entry (message no. AA449)
I have already checked the note 787350 and below thread that was previously discussed but we are on ECC 6.0, with support package SAPKH60405 note is not applicable.
http://bit.ly/gTdFA6
Regards
Metin

Hi Metin
1. Use Tr F-92
2. Specify Customer No in 1st screen & "Asset Sale Clearing Account" against Posting Key 50
This GL account should have Field Status Group G029 in Fs00
3. Tick the "Asset Retirement" check box in the above Gl acount and press entre
4. Enter the Asset No, Amount and other details in the next pop up screen
Br, Ajay M

Webservice end up in Access via 'NULL' object reference not possible error

Hello everyone,
I have a particular issue when I run a webservice on webclient but when i run on sap R/3 it works fine.
The dump which it give when I test the web service is
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RPCTRSU0" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
The code where it ends up in error is
2607 data: l_wb_interface type ref to fp_wb_interface.
2609 data: p_interface_data type ref to
                                  fb_interface_data.
2610 data: l_interface TYPE REF TO
                               if_fp_interface.
2611 data: l_exceptions type ref to cx_root.
2613 data: l_parameters         type ref to
                                       if_fp_parameters,
2614       l_parameter_table    type tfpiopar.
2615 data: l_fpintf_name type fpname.
2616 data: wa_dd03p type dd03p,
2617        DD40V_WA type dd40v.
2618 data: l_intf_imp_item type line of tfpiopar.
2620     l_fpintf_name = i51t8_adb_fpint.
2621            TRY.
2622               l_wb_interface = cl_fp_wb_interface=>load(
2623                                      i_name = l_fpintf_name
2624                                      i_mode =
                                  if_fp_wb_object=>c_mode_read
2626                                      i_language = sy-langu
2627                                ).
2628             CATCH cx_fp_api_usage into l_exceptions.
2629 *              RAISE error.
2630             CATCH cx_fp_api_repository into l_exceptions.
2631 *              RAISE error.
2632             CATCH cx_fp_api_internal into l_exceptions.
2633 *              RAISE error.
2634           ENDTRY.
2635
>>>>>     l_interface ?= l_wb_interface->get_object
2637     p_interface_data = l_interface->get_interface_data( ).
2638     l_parameters = p_interface_data->get_parameters( ).
Please let me know how to go about twith this error
Regards,
Raj

x

Access via null obj ref not possible error

Hi
I am using an assistance class and have specified it in the component...
i am getting the error Access via null obj ref not possible at following point in the code..
temp = wd_assist->IF_WD_COMPONENT_ASSISTANCE~GET_TEXT( key = '001' ).
i do not think we need to instantiate a assistance class ( or am i missing something ?/ )

Hi,
After reading all these posts and i have done a small test , it is working for me as the other posts already confirmed. I am not sure why it is not working for you the way you described and it is working for all others.
I hope that you are not executing this code from used component->view referring the WD_ASSIST where in the wd_assist reference is not passed.
moreover to make sure that the error is from this code you can code a if else construct.
if wd_assist is bound.
" get the text element.
endif.
If the above code is working then i suspect that the text element is not active .
Success.

PSE 9 deactivation not possible, error #194:10

Similar Messages

Maybe you are looking for