PSE 9 Layer Mask? Where is it?

...Just installed PSE 9 and am working with it for the first time.
Where, oh where, do I find the installed layer mask feature in PSE
9? I'm stumped.........Bill

Or select your layer in the panel, then Layer>Layer Mask and make the appropriate choice

Similar Messages

Smart object with a layer mask.

I'm using CS4 and I have run into a problem. When ever I create a smart object, photoshop applies a layer mask where is never did before. I can't figure out how to revert photoshop drawing the smart object without the layer mask.
It's driving me insane. I can't do anything and when I remove the layer mask, the smart object fills the whole canvas. Not happy!

PSE 6 for Mac, how to install the new layer mask tool

I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
Or perhaps first, has anyone used it and do you like it?
Do you put it here?
http://www.jcarter.net/mac-stuff/layermaskthing.jpg
Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
I remember when I was a beginner at this, I learned so much here and you all were amazing help!
Thanks,
Jane

Hi Barbara,
Its this one,
http://graphicssoft.about.com/od/pselements/p/layermasks.htm
So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
Not knowing where the Previews folder was, threw me overboard.
And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
So I really dont know what to do next with this, some of my classmates are wondering the same thing.
Thank you,
Jane

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the prefer

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the preferences, cleaned up the file. Renamed it to another file and 2 weeks later it is doing the same thing. Luckily I had my main subjects as smart objects and it saved them. This second time I just closed it out and opened it again and it is fine. Anybody else have an issue with this? Also it runs really slow these days on my MacBook Pro Retina 2.6 Core i7 with 16gb Ram.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Can someone tell me if there is any way to add a fully editable layer mask in pse 8?

Hi I am a web designer and ahve been working hard recently in adding new web graphic skills to my arsenal. Now, the problem I have been expiriencing with elements 8 is that while trying to reproduce a mirrored text effect, following a tutorial online I found myself not being able to add a layer mask on top of one of the text layers, to then apply a gradient. In the end I did it with Fireworks but is there any way around it in Photoshop Elements 8.
Thanks in advance
Carlo

Sure. You can grab the mask from an adjustment layer, or there are a number of add-on downloads. A popular one is here:
http://www.elementsvillage.com/forums/showthread.php?t=51319&highlight=grant%27s+tools

PSE 6 Layer Mask & OS 10.6.2

I'm looking to add layer mask capability to PSE6 on a mac with Snow Leopard and have seen the download from here:
http://graphicssoft.about.com/od/pselements/qt/layermasktool.htm
but the instructions specifically reference OS 10.4 and 10.5 but not Snow Leopard:
"Mac Installer: Download and Run Layer_Mask_Tool.dmg for Mac OS 10.4 and 10.5. Special thanks to Andrew Bartlett for creating the installer package for Macintosh."
Can anyone confirm if this does/doesn't work with Snow Leopard? Is there another solution for OS 10.6?
thanks

As Barbara says. This may also help.
http://easymactips.blogspot.com/search?updated-min=2009-01-01T00%3A00%3A00-05%3A00&updated -max=2010-01-01T00%3A00%3A00-05%3A00&max-results=30

Layer Mask Thumbnail Option

I'm using PSE 11 and layers masks. If you click on the layer mask thumbnail you have the option of "add mask to selection" and "intersect mask to selection". They both select the same area of the photo. So I use the help menu and go online and type in the same phase with quotes and it comes up no document found. How does someone learn about a feature in an app and yet don't have information on that feature? This is where people get frustrated with the help.
So...if anyone knows what the difference is, please let me know or how it's used. Thx

Omega0401 a écrit:
I'm using PSE 11 and layers masks. If you click on the layer mask thumbnail you have the option of "add mask to selection" and "intersect mask to selection". They both select the same area of the photo. So I use the help menu and go online and type in the same phase with quotes and it comes up no document found. How does someone learn about a feature in an app and yet don't have information on that feature? This is where people get frustrated with the help.
Using masks and selections are advanced workflows which justify a lot of tutorials and even whole books. Not something a tool description can achieve, especially when it deals with the interaction between two different, though similar ways to select areas of an image.
So...if anyone knows what the difference is, please let me know or how it's used. Thx
When you understand masks and selection, you know that you can:
- go from mask to selection and vice versa
- combine selections (add, substract, intersection...)
The contextual menu you are seeing lets you combine selections with masks without turning the mask into another selection.
Try this:
- duplicate the background
- desaturate the duplicate (Ctrl Shift U)
- add a mask
- Paint a part of the mask with black. That part shows in colour inside the grey background.
- now use the lasso tool to cover a part of the masked area plus a part of the rest.
- use the contextual menu and you should see the intersection.

Layer Masking

Hi,
I am quite lost about layer masking.
Lots of talks go on here, but I am not sure how to do it.
I have PSE 5.
For example I want to make a person B&W and the clothes in orignal color.First I make a Hue Saturation adjustment layer on a picture. Then I make the picture B&W by making saturation zero.The whole picture turns B&W. Then I read in one post that I need to paint over the area where I want to retain the color. and then do some thing??????
Here onwards I am lost how to proceed.
Can some one give me step by step help.
Thanks
Manoj

Open your layers palette. If you have just opened an image, the only layer visible will be the Background layer.
Add a Hue/Saturation adjustment layer. In the dialog, move the saturation slider all the way to the left. You should now see your image in black and white.
Now look at your layers palette. You have two layers. The top layer is the Hue Saturation layer you just added. There will be an icon at the left of the layer representation that indicates the type of adjustment layer and then to the right of that there is a blank white rectangle. This is the adjustment layer mask. Click on this mask to make it active.
Now select the brush tool and set your foreground color to black.
Paint on the image those areas you want to return to color. Since the mask is active, you are actually painting on the mask and blocking the effects of the adjustment layer so you can see the background layer beneath it.
Bob Warren

Layer mask visibility

Hi, I am trying to figure out how to set the mask visibility in Elements 9. If I create a mask, it sometimes comes in handy to see where you have been. In other programs I use you can turn the mask red for instance. Can't find that feature in pse 9 When a mask is turned red it would also be easier to see the different shades and oppacities you use.
Thanks a million

In pse9 you can use the backslash key to show the red overlay.
(the key just below the backspace key)
You can also change the mask overlay color or opacity by right clicking
on the layer mask and choosing Mask Options.
To show the mask as black and white you can Alt click on the layer mask.
MTSTUNER

Help with Photoshop CS2 files MUCH larger than normal, possibly not compessing layer masks

Has anyone else come across a problem where Photoshop files grow in size much faster than expected, especially when adding layer masks?
Normally when you add a layer mask the file size grow a small amount if the layer mask is mostly all white or mostly all black. In this case it's like the file size is growing exponentially, almost as if the layer mask isn't being compressed at all.
The file in question although large, is similar dimensions, resolution, and number of layers as other projects that have been worked on and all the usual thing have been checked like resolution, colour mode, bit depth and the image has also been cropped so there's nothing outside of the page.
The file has been checked on 2 different macs and exhibits the same behaviour and Photoshop preferences have been deleted and re-created and we've tried copying the file by dragging layers to a new document of the same dimensions with no success.
The only things we're certain of is that file size grows dramatically when adding layer masks in particular and layers in general.
The file was created by someone else, if that might be a factor, though the file has been "saved as.." with no improvement.
Any ideas?
TIA
Tom
The only

Maybe it has something to do with "Maximize Compatibility". If that's checked when you save, it might add a lot of weight to your file, even with just a simple layer mask. Don't know, haven't done any testing, just a thought.
Edit: Just did a quick test:
1. flat image saved as PSD = 5.2 MB
2. same image converted to a layer with simple layer mask, saved as PSD = 5.8 MB
3. same layer mask image saved WITH "maximize compatibility" = 10.7 MB
So adding "maximize compatibility" nearly doubled this test file. Could be it?

How do I add a gradient to a layer mask to counteract a gradual change in tone from one end of a photo to the other?

I swear I must be going nutso. I have a photo taken with a rather extreme 10mm shift of a shift lens, which consequently has a gradual darkening toward the top of the photo. No problem, says I. I just added a layer mask, clicked on the gradient tool and drew a line (in the appropriate direction) with that tool. What I got was a transparent area at the black end (of the gradient applied to the mask) grading to the darker part of the image showing through at the other end (of the gradient.)
I've done this before, and did the above instinctively, so I thought I was doing it right. When it didn't work, I tried applying the mask and gradient to a duplicate background layer, then flattening the image. Nada.
Jees. Something set wrong? A different blend mode than normal? I even checked with a CS6 guide by Martin Evening, who seems to be able to do exactly what I wanted with no trouble.
Or......maybe I am going nutso :).
Thanks in advance,
BAB

Thanks, that's exactly what I've done.....now I'm at least certain I'm not going nutso . Specifically, I have image 2 stacked above image 1, with the mask for image 2 appearing on the same layer. However, when I apply the gradient, exactly as you have indicated, I do not get image 4. Instead I get image 2 showing through at the top where the mask is white, and then a gradual fade over the black part of the mask to the diamond pattern typical of transparent layer.
Well, I be darned. I just tried it again and now it's working exactly as you described and exactly as I had expected it to. I was using a .psd and wondered if that were the problem, although why I couldn't imagine. So chose a .dng I had just downloaded and the process worked perfectly. Huh? So I went back to the .psd (a test image that I had done to see how much falloff there would be using this shift lens at it's fullest shift) and it worked perfectly also. I have no idea. I promise you I did exactly as you indicated above in all the times I tried to get the falloff subdued. Yes, I did the mask in the right direction, as you've shown above. Yes I used a duplicate layer, and yes I applied the mask to the duplicate layer. I can even get it to work using the mask applied by the Curves layer I used to lighten the duplicate layer. If you can think of anything that may have been set wrong, please let me know, because I think I checked everything including layer properties and those of the gradient tool as well. And I'm certain it will happen again when I'm on some deadline and really need the gradient. You know about Murphy's Laws, right?
Thanks, though. I'll mark this question answered and if I find something I set wrong, on purpose or accidentally, I'll pass it along.
BAB

Can't paint at full opacity in layer mask in CS6 64 bit windows 7

A problem has developed in my photoshop CS 6 64 bit on windows 7. I can't paint at full opacity in a layer mask. It is like an 75 % opacity brush. I have gone back to the default brushes soit is not the particular bursh. My brush settings are all at 100%, mask density is 100% , the blend mode is normal,-can't think of where else to look for the solution.The brush works just fine when I am not in a layer mask.
I updated the graphic card driver and also the wacom intuos driver. It has to be somewhere in photoshop CS6 as when I go into my older version photoshop, cs5, the mask opacity works works at 100 % opacity
Any ideas of what to do next.

I am having a similar problem that I need help with. I just loaded CS6 for the first time ever last week and have been tinkering around with photo editing. I am trying to use an action I downloaded to whiten the whites of the eyes and teeth. When I run the action I cannot paint with the soft white brush. I hit backslash and it shows no work completed, just a red background. I have everything selected at 100% opacity (brush and action layer).
A couple days ago I was able to use the brush tool to darken the background by loading an action and paiting on. Now I can't do that anymore.
I can use my brush for other tasks. I am so confused. I would greatly appreciate any insight.

Layer Mask not revealing the right colors

Hi I am new to Photoshop CS6, and photoshop in general. I am trying to take a color photograph, turn it to black and white, and reveal a flower in color and the rest is still black and white.
I thought I had done this properly when I added a new "adjustment layer, hue/saturation", reduced saturization to zero, and painted the yellow flower over with black to reveal the yellow flower's color while the rest of the photo is still black and white. And it worked..except when I got to the green stem of the flower. Painting over that with black revealed a yellowish-green stem.
I experimented a little more by painting black on the new layer mask and most of the rest of the color photo comes out wrong. The blue sky shows up like a weird smurf blue, faces are oddly peach/orange and most colors look much different than the originial photo. Yellow seems to be not affected, magenta/pink seems to be OK and blue shows up so-so. But the rest of the colors are messed up.
I know this must be something very basic, but why are the colors showing up odd?
Thanks

Sounds like you did the right stuff. You should expect to see the colors revealed where the mask is made black. I might have used a Black & White adjustment layer rather than Hue/Saturation, as that would give you more control over the grayscale part of the result, but the technique with the mask should be the same.
Any chance you could take a snapshot of your screen, save as a JPEG, and paste it here? That will help avoid a whole lot of questions.
I noticed your screen name... I live in "bokeh". The weather has turned nice down here after Sandy passed by, eh?
-Noel

Photoshop CS3 crashing when working on image with layer mask

I've never had problems with Photoshop CS3 (or any other version) until now.
Here's the problem:
I created an image that has a layer mask applied to it. The image is saved in one layer (named Layer One) but not flattened in order to retain a transparent background. So far so good.
But when I try to exapnd the canvas or make other changes to the image, it crashes. Repeatedly.
Do I have to apply the mask (and thus give up the transparency) to prevent crashes?
I did find a workaround. Applied the mask, made a cast drop shadow (which is what I was after all along), then copy-and-pasted the drop shadow into the original layer-masked image with transparent background.
But is this the only way? Am I experiencing a bug or is something else wrong?
Thanks!

You create a new user account
and it will show you where the corruption is. in the old user account or in the system or application.
It a method of troubleshooting.

Image in a layer mask with gradient problem

Hi,
I have a image in a layer mask with an gradient on a 30c0m0y100k background and at the gradient from image to background I always get a white "shine". which NOT appears when the background is the standard photoshop-black definition in all colors.
please have look also here (where the problem is): http://adobe.ly/1yXBCix
and here where it looks like I want to have it (where I switched the layer mode of the mask to multiply and that causes that my background is not anymore 30c0m0y100k): http://adobe.ly/1HFZfC4
thanks a lot!
oliver

Yes, just save it and post it here using the little camera icon:

PSE 9 Layer Mask? Where is it?

Similar Messages

Maybe you are looking for