PSE 9 OSX Installation Issues

Hello,
I'm trying to install the latest version of Adobe Photoshop Elements on a lab computer at a university (we are updating our images before the new year starts), but I'm having some issues actually getting the install to happen. It's obviously conflicting with something, but I'm not sure what, and the install halts at 2%:
I've tried looking into the issue with the Adobe Log Analyzer ( http://www.adobe.com/go/loganalyzer/ ), which points me to this solution: http://kb2.adobe.com/cps/835/cpsid_83570.html . Unfortunately, I can't find any of the running processes in Activity Monitor that the solution suggests.
I've put the log file on Pastebin here: http://pastebin.com/yewyKMw8
Any help is appreciated.
Thanks in advance.

hi rogue_cnidarian,
I had a look at the log file. It seems that the drive you are booted in is some network drive or is having network mapped folders of User Documents.
Can you please unmap the network drives and allow the installer to run on the local drive and then install again.
if your installer is kept on any network drive, then please copy the installer on the local drive as well..and then try to install again.
Regards,
Ankush

Similar Messages

  • OSX Installation issues

    I have Macbook pro 13" with c2d. when i am trying to reinstall osx, it get's stuck & i am forced to reboot.I rebooted 3 times & no luck. Can somebody help me? Thank you

    It got stuck at 3 places on 3 different occations. Each time I left the system for couple of hours before switching off the power button. The media is brand new & working on other laptop. I am doing a clean installation.

  • Mac OSX Player Issue: kernel: IOSurface: buffer allocation size is zero.

    We posted a blog entry trying to investigate the Console.app error log messages that appear when using the Adobe Flash Player on OSX (32bit and 64bit affected, 10.7 Lion, Player version 10.3 and 11.0).
    find our Blog entry here: http://www.nanofunk.net/mac-osx-lion-10-7-system-freezes-kernel-iosurface-buffer-allocatio n-size-is-zero-console-message/
    The Message that appears is
    kernel: IOSurface: buffer allocation size is zero
    To reproduce the issue, use this steps
    click on "Clear Display" in Console.app
    go to http://www.adobe.com/software/flash/about/ and the error will show up in the console.
    Sometimes, this freezes the whole OSX system, with a spinning beachball for at least 20seconds, up to five minutes.
    This is inacceptable. We are hoping to hear back from Apple or Adobe ASAP.
    Please try to reproduce this on your OSX installation and post the results to this thread.
    thanks,
    nanofunk.net

    As far as I've been able to discover, this bug is specific to WebKit browsers running (Chrome and Safari are based on WebKit).  Perhaps it is related to those browsers running plugins (like Flash) and using an IOSurface to pass the rendering data back from the plugin.  This issue was constant on my late 2010 MBP and would freeze the machine entirely once a day.  Having switched to using Firefox or Opera I no longer see ANY messages for "IOSurface: Buffer allocation size is zero".  Thankfully, this also comes without any more freezing when time machine starts up or at any other time.
    It looks like there are a lot of changes going on in WebKit relating to IOSurface usage (http://svnsearch.org/svnsearch/repos/WEBKIT/search?logMessage=iosurface).  Hopefully this will be fixed very soon.

  • Lightroom 4.2 Installation Issue

    Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct.  4.2 install ran fine.
    I've read through the posts in the Lightroom forum regarding  LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
    1) Downloaded the installation software twice.
    2) Ran the setup program in admin user mode.
    3) Ran the install in admin user mode.
    4) Get the following error in a Windows Installer window:
    The feature you are trying to use is on a network resource that is unavailable.
    Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
    Use source:
    c:\Users\RMJF\AppData\Local\Temp\{...}
    What I have found (after displaying hidden AppData folder):
    The location where the .msi file resides is different from the one defaulting in the above window.
    I select this alternate path, but still cannot complete the installation.
    Furthermore, when I cancel the install, I get this error:
    Adobe Photoshop Lightroom 4.2 64-bit Installer Info
    Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
    I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
    Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
    The installation source for this product is not available. Verify that the source exists and that you can access it.
    All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
    So, looking for suggestions.
    Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
    All quite frustrating.  Hope you can get me to a speedy solution.
    (System info:  Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare!  Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well.  No other apps are running during the install.)
    Message was edited by: marzo19

    untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
    even the microsoft fixid diden't help.
    So also desperate.

  • Installation issue on opensuse 11

    Hey All,<br /><br />Im a Windows guy still struggling with Linux set-upsso take it easy on me! :)  and Im having a hard time getting blaze installed and running.<br /><br />This is what Ive done so far.  I've successfully set-up the latest copy of openSuse11 64 bit version with: <br />  Tomcat 6.0.16 (Tested and running)<br />  ANT 1.7<br />  JAVA SDK & JDK 6<br />  Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0)<br />  Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip<br />  From Tomcat Manager I uploaded the blazeds.war file successfully.<br />  I unzipped the zip file into root/blazeds and from a command prompt ran     ant.  These are the errors Im getting:<br />     *  [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties.  It could not be found.  (Repeats about a dozen times)<br />     *  BUILD FAILED<br />     *  /root/blazeds/build.xml:445:  The following error occurred while executing this line:<br />     *  /root/blazeds/resources/fds-ajax-bridge/build.xml:52  Problem:  failed to create task or type if Cause:  The name is undefined.<br />     *  Action:  Check the spelling<br />     *  Action:  Check that any custom tasks/types have been declared<br />     *  Action:  Check that any <presetdef>/<mac  rodef> declarations have taken place.<br /><br />Variables:<br />env | grep _HOME<br /><br />ANT_HOME  = /usr/share/ant<br />JRE_HOME =/usr/lib64/jvm/java/jre<br />JAVA_HOME =/usr/lib64/jvm/java/jre<br />SDK_HOME =/usr/lib64/jvm/java/jre<br />JDK_HOME =/usr/lib64/jvm/java/jre<br /><br />Any ideas?<br />Brad

    Hi Alex,
    Sorry I've been away and just got back.  Presently I'm working from jrun4 and would like to use blazeds instead.  Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
    I look forward to your answer.
    Brad
    On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
    <
    [email protected]> wrote:
    A new message was posted by Alex Glosband in
    Configuration and Getting Started Discussion --
      Installation issue on opensuse 11
    Are you just trying to install and run BlazeDS? Why do you need to build from source?
    -Alex
    View/reply at
    Installation issue on opensuse 11
    Replies by email are OK.
    Use the
    unsubscribe form to cancel your email subscription.

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • HP Photosmart D7360 -- Driver/Installation issue

    For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer.  I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install. 
    It tells me that it can load verythign BUT the driver.  Any ideas?
    Thanks
    jstjohn

    Welcome to the forums @Pierre-Louis ,
    I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
    Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Photoshop CS6 Installation issues

    Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

    This link took me to location where I chose the appropriate version of Bridge update and it worked.  My verion was updated to 5.0.1.23
    http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

  • Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."

    I am trying to install print controller and printer -but get this error message when trying to use the installer:
    You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
    I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
    Any help and/or suggestions would be greatly appreciated
    Thanks!

    I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
    http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c

  • Remove Mac OSX installation from external disk

    Hello,
    I installed an extra max osx installation on an external disk. So i can starup from my HD or my ext disk depending on my start up disk choice. Everything works fine. Unfortunately i installed it in a partition with a lot off backup files in it, instead of creating a new partition dedicated only to the OS. I was wondering if there is a clean way of removing this installation without completely formatting the ext.disk again, so that i don't loose my data.
    Thanks

    I hope you don't mind my jumping in. AFAIK, dumping the OS X files isn't a simple process because many of it's files and folders are hidden. It appears that the ext HD has more than one partition. If so, move your data to the other, then you can erase the partition, removing all of OS X's stuff. However, doing that looses your bootable backup. Details WRT to the HD, its size, number of partitions, how much used and free space, etc. should help to determine a strategy that saves the data and also provides for a bootable backup.

  • Is there any way to enable SSH via Terminal in the OSX Installer utility list?

    Hi guys, I've messed up my install a little on my internal HDD.. I can't boot into OSX as I keep getting kernel panics on boot. I was just wondering if there's any way I can SSH into my Mac Pro via the Terminal on the OSX Installer Utilities list.. I have a Macbook Pro to SSH from but I need a way to enable SSH via that Terminal "-bash-3.2#"..
    I've tried to use the systemsetup -setremotelogin on command but I know SSH requires login keys and as I have no idea what can be used as those keys for the OSX Installer version of Terminal I have no idea how I can enable SSH..
    Tried some sudo commands but as I guess it runs at a completely different level to sudo it won't actually recognise the sudo command..
    Any help would be greatly appreciated guys, if you need me to post any info or results to help then just let me know.
    Thanks alot
    Chris

    If your Mac cannot boot to the OS X installation then you will not be able to set up the SSH (Remote Login) sharing service. The OS X installer does not support any of the system's sharing services. Technically it does have the sshd daemon (server process) that you can set up to accept a connection; however, this will not give you any additional benefit.
    The only reason to SSH into the system would be to get to the Terminal command prompt anyway, which is available when you boot to the Recovery HD partition and choose Terminal from the Utilities menu. If you were to set up SSH and log in, you would still only have the functionality provided by the Terminal in the Utilities menu, and not have access to your Mac's full OS installation.

  • NWDS installation issue - "Please wait... completing the install"

    Hi all,
    I got the same "Problem" each time I update my NWDS.
    [Re: NWDS installation issue.|Re: NWDS installation issue.]
    After the installation, when I start the NWDS I get always the message:
    "Please wait... completing the install"
    If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
    Is there no other solution around? I think I'm not the only one who has this troubles, am I?
    Regards,
    Stefan

    Hi all,
    I solved this problem by myself. So for everyone who is interested in how to solve this problem:
    Just delete the folder .config in
    \workspace\.metadata\
    During the next start of NWDS this folder will be created and everything will work as excpected!
    Stefan

  • Application Runtime Environment installation issue

    Hi,
    JDeveloper 11.1.1.3.0
    OS: Solaris SPARC
    I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
    JAVA Version in Solaris SPARC :
    weblogic@comm1 ~/Installs $ java -version
    java version "1.5.0_24"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
    Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
    Error:
    weblogic@comm1 ~/Installs $ cd Disk112/
    weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
    weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    Thanks,
    Rajesh

    Hi,
    I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
    weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    JDK Version:
    WL10/jdk1.6.0_21/bin $ ./java -d64 -version
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
    Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
    Please advice me on how to resolve this installation issue.
    Thanks,
    Rajesh
    Edited by: Rajesh on Mar 15, 2011 8:28 AM

  • Acrobat Installation Issues due to Computer Switch

    My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
    How do I get acrobat re-installed without the "you don't have a license" error message.
    I am on a subscription plan
    P

    licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
    I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
    Damariscotta, ME518.859.1944 (cell)
          From: RahulTyagi4you <[email protected]>
    To: Peter Collopy <[email protected]>
    Sent: Sunday, March 1, 2015 5:30 AM
    Subject:  Acrobat Installation Issues due to Computer Switch
    Acrobat Installation Issues due to Computer Switch
    created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Adobe AIR Installation Issue

    Hi,
    I am facing an installation issue with AIR file on multiple machines.Though I am able to install it on some machiens.Below is the log for same.
    [2011-08-05:11:56:02] Application Installer begin with version 2.7.0.19530 on Windows XP x86
    [2011-08-05:11:56:02] Commandline is: E:\ASMTv3India\ASMT2011_Beta-4Aug2011\ASMT2011_Beta.air
    [2011-08-05:11:56:02] Installed runtime (2.7.0.19530) located at c:\Program Files\Common Files\Adobe AIR
    [2011-08-05:11:56:02] Unpackaging file:///E:/v3India/App_Beta.air to C:\Documents and Settings\Media\Local Settings\Temp\fla2D.tmp
    [2011-08-05:11:56:03] Application signature verified
    [2011-08-05:11:56:03] Unpackaging/validation complete
    [2011-08-05:11:56:03] No app located for appID 'App2011-Beta' and pubID ''
    [2011-08-05:11:56:12] Converting unpackaged application to a native installation package in C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp
    [2011-08-05:11:56:18] Native installation package creation succeeded
    [2011-08-05:11:56:18] Starting app installation to C:\Program Files. Installing app ASMT2011-Beta version v3.010 using the source file at file:///E:/v3India/App_Beta.air
    [2011-08-05:11:56:18] Installing msi at C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi with guid {EBF346A2-FD8C-08C2-07E8-AA91ABD1CAE6}
    [2011-08-05:11:56:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-08-05:11:56:21] Rolling back install of C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi
    [2011-08-05:11:56:21] Rollback complete
    [2011-08-05:11:56:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-08-05:11:56:28] Application Installer end with exit code 7
    Please do the needful.
    Thanks & Regards
       Vishal

    Ok, I understand.  So before we continue, we really need to figure out what the exact error is.  Can you, on at least 2 systems, generate the MSI logs we'll need?  Here's a document that explains how to enable logging and where to find the logs once they've been created:
    How to enable Windows logging
    Once you've enabled logging, try installing again.  Grab the newly created msi logs and either post here or email me at [email protected]  I'll examine the logs and see if we can find a common issue between the systems.
    Thanks,
    Chris

Maybe you are looking for