PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

Similar Messages

Can some one help me with diagnostic test result " apple mobile device driver not found"?

I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address:             192.168.1.3
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Thu Jun 28 15:17:19 2012
Lease Expires:       Fri Jun 29 03:17:19 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
Thanks!!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite L775D
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number
Current user is not an administrator.
The current local date and time is 2013-01-08 11:16:27.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD Radeon(TM) HD 6520G
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod mini running firmware version 1.4.1
Serial Number: JQ******S42
<Edited By Host>

OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista

Bluetooth peripheral device driver not found-samsung fascinate

I have a samsung fascinate and a brand new dell inspiron laptop. I cannot get these two together via bluetooth. The laptop states the "bluetooth peripheral device driver not found."
Are there any solutions for this?
Thanks!

Sure! Try this: First, make sure you have activated Bluetooth pairing on your Fascinate. You can do this by going to your home screen, select Menu > Settings > Wireless & Networks > Bluetooth. Once Bluetooth is on, have your Fascinate scan for your computer by going to Bluetooth settings > Scan for devices. You might be able to pair them that way, instead of trying to find the phone using your computer.

Apple Mobile Device Driver not found. ...

Nor Itunes neither my PC can view my Iphone, what is more, it is completely discharged.. Here's the diagnostics...
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver not found.
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012B2100AAF8C28
Current user is not an administrator.
The current local date and time is 2011-06-30 20:40:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220M
**** External Plug-ins Information ****
Plug-in Name:          MiniLyrics Visualizer
Plug-in Loaded:          Yes
Plug-in Version:          0.8
Plug-in File Version:          Unknown
Plug-in Path:          C:\Program Files\iTunes\Plug-ins\iTunesMinilyrics.dll
Plug-in Name:          Last.fm AudioScrobbler
Plug-in Loaded:          Yes
Plug-in Version:          1.0.4
Plug-in File Version:          3.0.4.0
Plug-in Path:          C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius ID: 46b8dbeb48d2ea73f185160d9ef3debd
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Note: I simply unnistalled all apple programms, when my Iphone had errors, and installed the newer version... Maybe it is the reason why my Iphone is not being seen...

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me: "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When dowloading itunes, constantly get error message 'Apple Mobile Device -could not be installed- Verify you have sufficient privileges to install system services.

When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
i am forced to abort/cancel. Can anyone help please?

Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated.

Service 'Apple Mobile Device' could not be installed

I have been running iTunes for a long time but when I try to install version 10.5.3 or 10.6, I get the following error.
Service 'Apple Mobile Device' could not be installed. Verify that you have sufficient privileges to install system services.
I have never gotten this before trying to install a newer version.
I am running on Windows 7 with an administrator password. I tried uninstalling and then installing and get the same error.
Any help is appreciated.
Thanks!
Bill

b noir,
Thanks for the reply. I had seen this possible solution in another thread this morning, but when I looked at that it already said disabled. I restarted the computer and that didn't make any difference. I still got the same error.
I finally was able to install however. First I had to uninstall all Apple products including Bonjour, Apple Software Update, iTunes, Apple Application Support, and Apple Mobile Device Support. I then re-installed 10.5.3.3 and all seems to be good.
I'll not try to upgrade to 10.6 again. That was really a hassle.
Thanks,
Bill

T420 Base System Device Driver not working W7

Hello,
After reinstalling W7 the lenovo solution center was complaining saying that the System Device Driver is not working.
I saw that the SD card reader was not working neither so I assumend the missing driver was that one.
From the Lenovo page I dowloaded the driver for the Multi Card port for W7 and T420. After installing it the message dissapeared and the SD cards were recognized properly.
However, after rebooting the system, after a while, the mesage appeared again and the card reader stopped working.
I did install it again and the same happened. It was working and after two reboots stopped working.
If find this quite misterious. I wonder If anyone knows how to fix this.
Solved!
Go to Solution.

Hi Zardoz,
Welcome to Lenovo Community!
As per your query we understood that you are facing the issue with SD card reader on ThinkPad T420.
This kind of issue will occurs if there is any issue with drivers, hence I suggest you to uninstall the recent installed card reader driver from your system through Control panel – Program & feature option and restart the system.
After restarting the system please download & install ThinkVantage system update utility from Lenovo support site, after the installation run the program so that it will search for all the required drivers and application for your system.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Device driver not working properly

windows reports that the BHDrvx64 device is not working properly. have tried everything to fix including system restore. windows does not have an update for this device, also tried hp software and driver downloads site and could not get specific information on exactly what kind of device it pertains to. right now system is not to bad and would hate for it to crash on me

Lia.
Are you using Norton???
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Sound no longer works-Audio driver not plugged in

I can’t get sound from my computer, (Satellite 115D-S1120) even with a headset. I opened the control panel/ sound and under the playback tab it says:
Digital Output Coexant Audio driver for AMD HDMI codec not plugged in
I've looked on the net and this forum, but don't see what the problem is or how to fix it. By the way, I'm okay following computer directions and fixing problems I can see, but I’m not sophisticated with downloading drivers, etc.
I appreciate your help. My computer without sound is not very useful!
Thanks,
Sondra

Sondra, see the section Recovering the Internal Storage Drive, which begins on p. 58 of the User's Guide.
   Satellite T110/T130 Series User’s Guide
Best to restore completely from the hidden partition as explained on p. 59 in the section Recovering to out-of-box state (recommended recovery method).
Everything on the hard drive is replaced by this procedure.
1. In case restoring does not fix the audio problem, you may want to add an external sound device or have the machine repaired. In that case, it's likely you would want to return the hard drive to its present state. You can provide for that by creating an image of the disk on an external drive.
   Back up your programs, system settings, and files
   Restore your computer from a system image backup
2. In any case, you should separately back up all of your important data files to external media. If the sound works after restoring, you'll want to reinstall added applications, restore the data files, and redo all your settings.
3. Before restoring, you should burn recovery discs. See the section Creating recovery DVDs/media, which begins on p. 66.
Questions?
-Jerry

Conexant audio device driver won't install on T510 with windows XP SP2

I am having trouble in installing audio driver for Conexant audio device on an SSD with windows XP SP2 installed already. After running the installer, it tries for a while, and says media device can't be found. But booting from the win7-loaded internal drive, I can see it in the device manager. I also see a few devices like base system device(?) in 'Other devices' category. Could you help me get audio on the windows XP?
Solved!
Go to Solution.

Hi,
Thank you very much for your reply that led me to helpful information. Unfortunately, it didn't fix the issue, but I think I'm closer to the resolution of this issue.
So, I believed I installed Intel chip set and power management drivers, but did uninstall and re-install including .NET F/W 3.5. Unfortunately it didn't work.
Your link led to pages of unknown/driver-less drivers and made me check more detail. I had only 2 PCI devices left in 'Other devices' category, so I checked the details of those as below:
1. PCI\VEN_10DE&DEV_0BE3: I searched this item on the web, finding that the vendor is Nvidia, but could find device 0x0be3.
2. PCI\VEN_8086&DEV3B56: this is vendor Intel, but again no device found. The closest one is SoL device, though.
So, it appears somehow the Conexant audio device is not even in 'Other device' category, and the intaller can't find the device. I wonder if some other driver grabbed this device, so it's not available for driver installation. I will do more investigation, but please help me address this. Thank you again, and in advance.
P.S. : I don't see the SoL driver installed after installing Intel drivers, and there is no 'Ports' category in the device manager, either.

TS1538 iPhone 5 and Windows 7 device driver not being recognized

I've de-installed in the correct order and re-installed all Apple software for Windows 7 x64 box.
I've manually added paths to the device driver.
I've re-scanned device manager.
I've gone through 4 different kbb articles.
Used 4 different USB ports on the Front Panel of this box.
I've restarted, stopped, started the Apple Mobile Device Service.
I've rebooted 15x, my Alienware R3 laptop works just fine.
I can see the iPhone 5 in iTunes, and this problem has been occurring with my iPhone 4.
Devices and Printers lists the iPhone and Apple Mobile Device USB driver without any conflicts on the exterior.
If you go into properties boom Unvailable. I've turned off every shield in Avast. I only have 1 A/V.
What else can I do?
The rig is a custom built i7 3770s, MSI motherboard, 16gb DDR 3 RAM, USB 3 support etc. I've tried everything... why won't my iPhone get recognized? I seriously do not want to wipe the box for a device driver. Does RDP software create conflicts with USB devices? I have a couple installed.

Hi Allan,
I am using 11.0.4.4 version of iTunes.
Nilay

W1907 device driver not found

Bear in mind I'm brand new. With that said, I purchased a new system recently and in the process of setting it all up i was prompted to load the device driver for my w1907 monitor. Upon doing so I got the message that the software was found but a problem occured while trying to load it. Now everytime I reboot I get the Found New Hardware notice saying the driver needs to be installed. I try everytime and it does the same thing. I am using this monitor with no problems at this time, but I'm running a separate set of audio speakers so don't know if there's any sound issues. Should I try to find a solution to this? I went online to HP's support page and downloaded their driver, the same results. If it's not a big deal then how do I get the notification to stop popping up on reboot? The "don't ask this again..." about the driver install doesn't work. Any advice on this would be appreciated, Thanks in advance, oldschool
This question was solved.
View Solution.

This might be because you used the driver cd for the lcd which I recommend to never use.
Try going to Start, rightclick on computer and go to Properties, on the top left corner click Device Manager then when it comes up find Monitors, click on the plus sign, right click on the HP.....lcd and go to Update Driver Software, then choose Browse my computer for driver software, then on the top bottom click Let me pick from a lisr of drivers.... then click Generic PnP Monitor go next, wait a few moments, then click Close or Finish and restart the pc.
Let me know if it works.

SOLVED - iPhone Bricked by Update Device Driver Not Installed Error 1602

iPhone 4 / Windows 7 x64 / iTunes 9.2.1.5
My iPhone normally interfaces with iTunes on my PC via USB cable without issues.
iTunes prompts to update the iPhone when a new version of iOS is released. Each time, the update has failed as described here: http://support.apple.com/kb/ts1275.
The update process stops, the "Connect to iTunes" screen is all that displays on the phone, and an utterly informative alert message comes up in iTunes along the lines of "Error 1602 (or 1604), The iPhone could not be restored. An unknown error occurred." Along with this, the iPhone ceases to be recognized as a USB device by Windows 7, with a little notification tray pop-up informing me that "Device Driver Software was not successfully installed". The iPhone no longer shows up as a device in iTunes.
The generic troubleshooting steps listed at http://support.apple.com/kb/ts1275 (changing USB ports, changing USB cables, restarting the computer, uninstalling and reinstalling all Apple software, etc., etc.) were a useless waste of time, but following the links for USB troubleshooting led to this page: http://support.apple.com/kb/TS1538
As instructed there, I located the Apple Mobile Device USB Driver in Device Manager. It appeared listed as "Apple Recovery (iBoot) USB driver" with a yellow exclamation point; thus I attempted to reinstall the Apple Mobile Device driver. First I uninstalled the existing driver, then scanned for hardware changes, then tried to update the driver as described. However, the path where the driver files were supposed to be (C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Driver) did not exist; the Driver folder was missing.
After Googling a little I came across http://discussions.apple.com/thread.jspa?threadID=1949672 and http://discussions.info.apple.com/thread.jspa?messageID=10806341. Following the instructions there, I was able to pull the device drivers (usbaapl64.sys, usbaapl64.cat, usbaapl64.inf and usbaplrc.dll) out of the iTunes installation program (from AppleMobileDeviceSupport64.msi, using WinRAR / Universal Extractor), put them in the previously nonexistent Driver folder and make Windows use the drivers.
Happily, this manual driver reinstall allowed Windows / iTunes to recognize the iPhone and proceed with the update / restore process. I had to repeat the driver reinstall process a couple of times during the iPhone restore - as it progressed, it kept switching the driver back to something nonfunctional - but the restore eventually went through, allowing me to keep my apps, data, history, etc. At least, until the next iOS update.

Hi liam3w,
Please try to reset BIOS, if problem remains, please kindly contact local lenovo for hardware inspection.
Please enter BIOS be pressing F1 in "ThinkPad Screen", F9, then F10.
Fred
T61 + X201i

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

Similar Messages

Maybe you are looking for