PSE10 Dust and Scratch filter eliminates the correction achieved when I click OK

PSE10 using Windows 7 64bit system. When I use the Dust and Scratch filter, I can see the improvement in the photo (or the inset) , but when I click OK, it goes back to the way it was. This happens whether I use "Preview" or not. Any suggestions would be appreciated. Thanks in advance.

Quit the editor, then restart it from the button in the organizer or welcome screen, or by double clicking the actual .exe file. However you do it, hold down ctrl+shift+alt as you start it. Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Similar Messages

Problem using Dust and Scratches filter in Photoshop CS6

Using the 64-bit extended CS6 version under Win 8/64. Am I not using the filter correctly, or is this a limitation regarding its use?
I duplicate a layer and apply the filter. I then add a white mask and invert it to get black. I change the layer blending mode to either darken or lighten, depending on the requirements at hand. I use the paint brush to remove the spotting and it works. However, if I add a new layer and then go back to the Dust and Scratches layer, the paint brush further modify the layer. I need to create a new layer and start all over again.
I am finding that if I convert the layer for smart filter use, I cannot use the paint brush. The layer needs to be rasterized, again.
Thanks,
Steve

I am painting with a white brush - onto a black mask. The purpose is to only apply the Dust and Scratches filter to specific areas.
The brushing will apply the filtered effects when I create the layer, apply the filter, and apply the black mask. The brushing no longer works if I create a new layer and then return to the layer with the Dust and Scratches filter. The problem is similar, I think, to if one were applying an effect with the history brush, close the file, and reopen it. The history brush won't be helpful because the history is lost.. In this case of applying the filter to a layer with a mask, the history brush isn't used and I would have guessed that the layer would allow re-use of the filter and brush.
Steve

Dust and Scratches filter stopped working

beginning yesterday, when I select an area of a photo and attempt to use the 'dust and scratches' filter, Elements 11 jumps to the 'Hand Tool' and locks up. This is on a Windows 8 machine. Any ideas?

When PSE gets weird, the first thing is always to reset the preferences. Go to the editor preferences>general and click this button, then restart the editor:

Im looking to have my albums in one place and my singles in the other. so when I click my music there should be my albums and my singles

im looking to have my albums in one place and my singles in the other. so when I click my music there should be my albums and my singles. can I do this

As tt2 says, iTunes regards everything as being part of an album. However, you could use playlists or playlist folders to group your library as required ... one possibility would be to use the Grouping field, setting this to "Album" for everything you want to see as an album, and "Single" for singles, and then set up smart playlists that select on the appropriate Grouping value.

I have an iphone 4s and about a week ago i loaded a bunch of my music cd's onto it! Yesterday i tried to add about 10 more cd's! And now i go to the music icon on my phone and it shows all the albums but when i click on the album a sceen shows up that say

I got this phone a week ago and was able to put about 15 albums on it! Yesterday i went to add 10 more to my iphone 4s and all the albums show on the menu but when i click on the album tthe next sceen tells me i can buy this album at the apple store! All the albums are in my library i just cant get them back on my phone! And all the albums that were on my phone are also doing the same thing with the screen that says i can buy these from the apple store!

So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!

I have an Ipad using 5.0.01 and am new to the experience. When I click on the icon for calendar, I get the calendar presentation but do not no how to make an entry. The tutorials all say you click on the " " sign, but there is no such sign in the lower r

I have an ipad with 5.0.1 and trying to learn how to use it. When I click on the icon Calender, I get the calendar presentation but I do not know how to make an entry. Every tutorial I have looked at says that you click on a + sign in the lower right corner and then make your entry. I do not have a + sign on my screen. Can some one help me.

You can download a complete iPad 2 User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
 Cheers, Tom

I bought an IPhone 3gs and tried to reset the APN but when I click on settings then General they tell me to click on the "Network" tab but there is not a tab for "Network"? After Network, I was supposed to go to Cellular Data Settings?

I bought an IPhone 3gs and tried to reset the APN through Strait Talk Wireless but when I click on settings then "General" tab they tell me to click on the "Network" tab but there is not a "Network" tab? After Network, I was supposed to go to Cellular Data Settings but I can't find the Network tab under the General tab. I watched videos and every IPhone I saw had the Network tab but mine don't, can anyone please help this old man fix this new technology, so I can use the Internes and MSM?Thanks, jerry b <><

Hey electrikn,
Thanks for the question. If your iPhone 3GS has been updated to iOS 6, this setting had moved:
Set network options: Go to Settings > General > Cellular
via http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thanks,
Matt M.

Dust and Scratch Removal PSE 6 3rd Party Programs ?

I've currently got PSE 3.0, going to upgrade to PSE 6.0, but also looking for even better Dust and Scratch Removal than PSE 6.
Any suggestions ?
[email protected]

Yes, "Dust and Scratches" does work on PSE5. I've used this filter on the two pictures at: http://i48.photobucket.com/albums/f244/cooper213/dustscratch.jpg
On the left is the original of a scan of a 40s snapshot. On the right is that image with one pass of the Dust and Scratches filter.
You can't just apply D&S without some experimenting with the Radius and Threshold. The higher the R & T, the more the noise is removed, but the more the image is blurred. I used a very low figure for both Radius and Threshold. I would not stop here with the editing process.
I'd use the Healing Brush tool to remove some of the remaining noise on the black coat. I'd do some sharpening, and possibly sharpen only the figures by creating a Selection so the clapboards on the house don't start to look wonky.

Handling dust and scratches in Aperture

Hi all,
I have been looking for some kind of tool within Aperture that might be able to help dealing with dust and scratches on scanned film.
For dust spots, the spot and patch tool seems to help, but for scratches and other fine blemishes that take the form of lines instead of circles, the spot and patch tool does not seem to be able to handle it.
Another thing that doesn't seem to be supported is the case where two blemishes are very close together.
Is there another tool inside Aperture that I should be using?
A round trip to photoshop unfortunately blows away any advantage you get by using the raw workflow.
Is there something obvious that I am missing?
Regards,
Graham
--

No -- Aperture's spot and patch tools work on round things. You can't clone a big long scratch out of something like you can with Photoshop in using the clone tool.
No real way around that -- Aperture is a photo editor not a pixel editor (they're quite different things under the hood). You'll need to round trip to Photoshop for these kinds of things (hence the 4x or 5x file size increase you get... from using a pixel editor . I wouldn't say this "blows away" all of Aperture's advantages, but yes if you're retouching a few hundred old scratched photos it will be a pain. But Aperture's core strength is in workflow for shooting with a digital camera and sorting, keywording, and doing light to medium editing. It's not going to compete with Photoshop for heavy retouch work or stuff often started from scanning negatives.

Removing dust and scratches?

I just had some of my parents' old home movies digitized (homemoviedepot.com) to Digital8 format, and as I write this I'm importing them into iMovie. Eventually they'll have a soundtrack applied and it'll move into iDVD.
However, since some of these movies are more than 45 years old there's a fair amount of dust and scratches and such from them. Home Movie Depot did a fantastic job at converting them to digital format (far better than the old VHS transfer that my sister had done ~12 years ago) but there's still room for improvement -- not only with the dust and scratches but also with color restoration.
What's the fastest/best/easiest way to clean this up? Is there a "De-Age Film" iMovie plugin somewhere that'll get me started?

every tried to accomplish that with a still?
Yes, all the time. But the rules regarding a still are quite different from the rules regarding video.
how should the software know, what is dust, what is grain?
By comparing median values of the previous and following frames. Mathematically speaking, it's actually pretty darned easy to figure out if there's dust in a video frame or not. All you have to do is compare color and texture values from one or more preceeding and proceeding frames. If there's "blue" in a given range of ten frames, then there's "black" in a frame, then "blue" in the next ten frames, odds are that "black" section is dust. Have the computer interpolite the color and texture values for that region based on the frames immediately before and after it.
geethree.com offers in Slick9 some more elaborated hue & stauration adjustments then iM does....
Yes, I already have that and will be experimenting with it eventually. I would like to remove the dust and such before playing with color, however.
isn't it wonderful, to see with a blink of an eye, that "recording" ist 45 years old? let it be old....
This is just a matter of opinion. IMO, removing excessive dust and debris from the frame is not robbing the film of its age. I'm not colorizing a b&w film; I'm restoring the color that was lost to age.
I mean, you could go even further back with that argument. Doesn't converting the film to a "sterile" DVD and watching it on a TV screen rob the film of its "old-time charm" of setting up a projector and video screen?
IMO, this is exactly the sort of thing that iMovie was made to do.

How do I remove an incorrect apple ID from an iPad and replace it with the correct one?

How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?

Hello Shy guy,
You can try this:
1. Go to the iTunes Store or App Store
2. Scroll down, there you will see Apple ID: "your email" (below Redeem and Send Gift)
3. Tap on that button
4. Tap on Sign Out
Now you should be able to use another Apple ID.
Cedric

Ok... i am trying to sign into my apple account in the itunes store on my ipod and i have all the correct data for my credit card and it says " your payment information does not match your banks records. try again or nenter a new payment method. " help me

ok... i am trying to sign into my apple account in the itunes store on my ipod and i have all the correct data for my credit card and it says " your payment information does not match your banks records. try again or nenter a new payment method. " what does this mean and how can i fix it??

- See:
]iTunes Store: My credit card's security code or zip code does not match my bank's records
- If still problem contact iTunes by:
Contact iTunes

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
Regards
Stefan

[svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

Hi Spookola,
I don't know how that could have happened. Go through the folders for the rolls and separate the 2005 rolls from the 2006 rolls, then import the 2006 rolls.

PSE10 Dust and Scratch filter eliminates the correction achieved when I click OK

Similar Messages

Maybe you are looking for