PSE10 stops responding, shutdowns and restarts

When my PSE10 stops responding, as it frequently does, it does not pay to wait. Even if it finally responds, I have to shut down my computer before I can access the app and begin work again. Has anyone else had this experience and if so what did you do about it?

See if this solution helps:
http://forums.adobe.com/thread/1225146?tstart=30

Similar Messages

Stop Sharing Process And Restart Final Cut Pro X

Hello, i am pretty new to Final Cut Pro X. I have created and edited a video file in it. Now i am going to share it using Master File option. My question is that when the sharing process starts, which i can see in the background tasks option, is there any way i can stop the sharing process, let us say save what percentage is done, then close the Final Cut Pro X, and let us say i have to shutdown and restart my Mac again. Can i restart the sharing process from the same point???

NNo. You can cancel the process, but you have to start over.

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

My macbook pro is frozen on desktop mouse no response i have forced shutdown and restarted 3 times no change. What to do ?

Hi guys and gals
Have not used my macbook pro for couple of months and now she is frozen - opens to wallpaper on desktop of snow leopard but absolutely no response with mouse or track pad . Screen goes blank after 5 mins then the only response is from the power button . When pressed the screen lights up with window asking if i want to shut down or.....enter has no response . Only option is to force shutdown and restart yet this does not resolve issue.....back to square one!!!!
Help???

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

HT200047 when watching a movie sub titles keep popping up and wont go away unless I stop the movie and restart it. I have sub titles and closed caption off but it still comes up.

dont know what to do. When watching a movie, closed caption comes up and it wont go away unless I stop the movie and restart it. Closed caption and sub titles are off but still comes up. I restored my apple tv to factory settings to see if that would stop it, but it didn't work still comes up. What can I do?

Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists.

To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Macbook pro 15 inch can't shutdown and restart normally

My macbook pro 15 inch can't shutdown and restart. I reinstalled the system but the problem still had.what's can i do?
Many thanks

Shutdown the machine until you can take it to a Apple repair/store and get a new adapter or contact the person you might have switched it with.
Your document isn't worth a few thousand dollar machine, use something else to finish it.

Elgato video to USB has become unreliable after shutdowns and restarts

I have Yosemite 10.10 on an early 2009 iMac, and an Elgato Video capture device with latest software (1.1.5)
The messages "Device could not be initialized" and also "Please connect your Elgato Video capture hardware to any USB 2.0 port" come up after I have had a shutdown and restart.
For 2 or 3 years i have operated this system with no trouble, but as the iMac software became upgraded, and also the Elgato S/W upgraded, the problem has come up, so now I am reluctant to shut down. However, there are times it must be, such as when the power company shuts service down for maintenance - happens a lot lately. I have tried different ports, and done the unplug and replug routine, but it takes dozens or even hundreds of attempts until one time it works. then i have to be sure not to "quit" after a recording session, or the problem comes up all over again. Also I tried using a USB hub, with no success. Also, I have tried to reset of the USB bus routine (Command-Option-P and R keys during startup) with no success.

Get rid of CleanMyMac and DivX. Add much more RAM. You don't have nearly enough for all that you are trying to load.

System fails to shutdown and restart in addition to keyboard freezing HELP!

System fails to shutdown and restart in addition to keyboard freezing HELP!

Try resetting your SMC.
Resetting the System Management Controller >>
Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 

I have two wireless networks that I switch back and forth. Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart. What is the fix?

I have two wireless networks that I switch back and forth. Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart. What is the fix?

Create two locations in Network, one for one and one for the other.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Random shutdowns and restarts...where to begin?

This is a client's machine.
It is a second generation G5, 17". It passes all TechTool tests. We have the back cover removed to check for overheating. Thus far, we have not been able to duplicate the problem of the shutdowns and restarts...but the machine is essentially idle all day. The processor is not really being used, so it is not an accurate test.
1. Is there are software utility that will put a load on the processor so that we can recreate the issue?
2. Does this have any known heating issues, like the 20" of this series that were recalled?
Thanks in advance for any help.
G5 Mac OS X (10.4.8)

One not uncommon cause of this problem can actually be the very simple matter of a misaligned power cord collar, Bailey's Dad - see http://docs.info.apple.com/article.html?artnum=86817
This might also help to explain why the behviour hasn't been easy to replicate after the move and with the back taken off. Maybe it is now properly seated!
Putting it under load would be a good idea , though. A power supply issue is not out of the question. The SETI "BOINC" software - http://setiathome.berkeley.edu/ - can be used to create an ongoing artificial load. Playing or rendering videos works pretty well (as Miriam has already suggested) too though. So does running "Classic" applications, using the Classic OS9 emulation.
Printing will provide a short term load on the processor and power supply, too.
THe "Rev B" extended repair program that Miriam has linked to only applies to the 20" model , I'm afraid, not the 17".
Cheers
Rod

MacBook Pro shutdowns and restarts unexpectedly

Hello,
I have a problem with my MacBook Pro because it shutdowns and restarts unexpectedly?. Also, suddenly it goes frozen and a beep starts, Do you know what mught be occurring?. Thanks.
Eduardo

Hello Eduardo
It sounds like an issue with the RAM on your MacBook Pro. The idea is to see if you can reseat the RAM and if you cannot, then you would need to talk to an Apple Store or an Apple Authorized Service Provider for additional support.
Intel-based Mac Power On Self Test RAM error codes
http://support.apple.com/kb/ht2341
Regards,
-Norm G.

Facetime auto shutdown and restart

After using FaceTime on my ipad mini and iphone 5 for 3 - 5 mins, the device will shutdown and restart back or turn to blue screen then restart back. I try to reboot using the home plus sleep button and reset network setting, but the result still the same

Try this:
1. Close all inactive apps. Double-click the Home button and hold apps in the Task Bar down until they all wiggle then tap the minus sign to close apps. Tap the home button to return to Home screen.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

G470 BIOS shutdown and restart problem 40cn33ww_64 2.19

Hi there, please kindly help me. I have Lenovo G470 Notebook. with Core I3, 8GB RAM, 500GB HDD, Bios Version 2.19 (Updated)actually, after i updated to 2.19 bios version i got these problem. when i click shutdown. the Disk stops but the the power still running.when i click restart (on battery) my notebook goes to shutdown completelywhen i click shutdown (on adaptor) my notebook goes to restart. first i think this is about OS, i try all OS but it remain the same problem.please give me a solution. thanks.

samidt wrote:
Hi CB, i'm very appreciating your effort to solve my problem
I tried your way to press OKR key when my laptop is Off.
What i got is, i go to my win10 logo. Not to bios one
And when i'm on my desktop, there's no other thing than my ordinary desktop.
FYI, before i get the win10 logo, i got the black screen with F2 to bios and F12 to select boot order. But i prefer not to press it.
Its just like the same with pressing power button to power on my laptop.
Any idea how to solve it CB ?
I'm familiar with laptop stuff. So maybe you can show me how i fix it myself.
Big thanks CB
Just a couple of questions to clear up my understanding of the situation - bear with me.
Before you installed Windows 10, did the power button respond normally and were you able to see your BIOS pages?
Also - when you installed / upgraded to Windows 10 was it a "clean install" or did you follow the upgrade path?
If you were able to operate the notebook with the power button prior to installing / upgrading to Windows 10 I would try booting from a "live DVD" for Linux (Mint / Ubuntu / Fedora) to see if it works in that situation. If it works as expected in Linux then we have a Windows OS issue to deal with.
If you performed a "clean install" of Windows 10 it may have wiped out the factory partition (hidden) on your hard drive and going back to factory settings may not be an option.
Cheers.

PSE10 stops responding, shutdowns and restarts

Similar Messages

Maybe you are looking for